Commit Graph

2120 Commits

Author SHA1 Message Date
Ludovic Barre
e9974166a5 watchdog: stm32: add dynamic prescaler support
This patch allows to define the max prescaler by compatible.
To set a large range of timeout, the prescaler should be set
dynamically (from the timeout request) to improve the resolution
in order to have a timeout close to the expected value.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:36 +02:00
Guenter Roeck
345f162510 watchdog: Improve Kconfig entry ordering and dependencies
HPWDT_NMI_DECODING depends on HP_WATCHDOG and should be next to it.
This helps menuconfig identify HPWDT_NMI_DECODING as depending on
HP_WATCHDOG.

BCM_KONA_WDT_DEBUG depends on BCM_KONA_WDT which depends on COMPILE_TEST.
Enabling BCM_KONA_WDT_DEBUG without BCM_KONA_WDT does not make sense,
so drop the COMPILE_TEST dependency from it. This also improves
menuconfig, which now properly associates BCM_KONA_WDT_DEBUG with
BCM_KONA_WDT.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:36 +02:00
Guenter Roeck
ec24292925 watchdog: npcm: Enable modular builds
Most of the NPCM7XX drivers can be built as modules.
The NPCM7XX watchdog driver code supports building it as
module, but its configuration option is set to bool.
Make itr tristate to actually support modular builds.
This improves consistency with other drivers for the
same platform and enables including the driver in multi-
platform configurations.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:35 +02:00
Guenter Roeck
0d3e156399 watchdog: Make watchdog core configurable as module
Under some circumstances it may be desirable to configure
the watchdog core as module. Enable it.

As part of this change, mark pretimeout governors as depending
on the watchdog core. This is necessary to prevent governors
from being built into the kernel if the watchdog core is built
as module.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:35 +02:00
Guenter Roeck
471ce88b84 watchdog: Move pretimeout governor configuration up
Watchdog pretimeout configuration was at the end of the Kconfig
file, after individual watchdog drivers, and thus easy to miss.
Move it right after basic watchdog option declarations.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:35 +02:00
Guenter Roeck
f627ac0e12 watchdog: Use depends instead of select for pretimeout governors
Watchdog pretimeout governors were enabled from the default governor
selection using "select". As a result, the default governor was always
built into the kernel, even if no watchdog driver was loaded. By using
"depends on" instead of "select", we are in better control, and the
governors can all be built as modules. At the same time, set the default
configuration option for pretimeout governors to match WATCHDOG_CORE
(meaning all pretimeout governors are by default enabled if pretimeout
support is enabled).

The practical impact of this change is minimal. Previously, selecting
a default governor automatically enabled that governor. Now, a default
governor can only be selected if that governor has been enabled.
Consequently, the order of governor selection is now reversed: The
governor selection is now first, followed by default governor selection.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:34 +02:00
Paul Gortmaker
0b468829c3 watchdog: rtd119x: drop unused module.h include
The Kconfig for this driver is:

config RTD119X_WATCHDOG
       bool "Realtek RTD118x/RTD129x watchdog support"

...and hence it doesn't need to include module.h for anything.
There are no other signs of unused modular infrastructure.

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:34 +02:00
Paul Gortmaker
3b02dceec2 watchdog: intel_scu: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

config INTEL_SCU_WATCHDOG
       bool "Intel SCU Watchdog for Mobile Platforms"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

We leave the moduleparam.h include since the file does declare some
module parameters, and leaving them as such is currently the easiest
way to remain compatible with existing boot arg use cases.

Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:34 +02:00
Paul Gortmaker
73027cb8e8 watchdog: coh901327: make it explicitly non-modular
The Kconfig currently controlling compilation of this code is:

config COH901327_WATCHDOG
       bool "ST-Ericsson COH 901 327 watchdog"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_ALIAS is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

We replace module.h with moduleparam.h since the file does actually
declare some module parameters (i.e. boot args for non-modules).

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:33 +02:00
Wolfram Sang
154511636a watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:33 +02:00
Wolfram Sang
b74d646134 watchdog: xen_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:10:32 +02:00
Wolfram Sang
6781ce2ef1 watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:09:43 +02:00
Wolfram Sang
b4214185b9 watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:08:32 +02:00
Wolfram Sang
2d505e3e40 watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:08:32 +02:00
Wolfram Sang
cd6457a925 watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:08:31 +02:00
Wolfram Sang
14fad5d98d watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:06:40 +02:00
Wolfram Sang
ff00800b64 watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:06:39 +02:00
Wolfram Sang
5c09980d9f watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:06:39 +02:00
Wolfram Sang
89bd0ed885 watchdog: i6300esb: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:05:01 +02:00
Wolfram Sang
87dfe210fa watchdog: hpwdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:05:00 +02:00
Wolfram Sang
cccbf8baa1 watchdog: ebc-c384_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:05:00 +02:00
Wolfram Sang
c7d30d42ff watchdog: cadence_wdt: still probe if user supplied timeout is invalid
We have a default timeout value in the driver which we will fall back to
if the user supplied values are out of bounce.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:59 +02:00
Wolfram Sang
5429e3a579 watchdog: cadence_wdt: drop warning after calling watchdog_init_timeout
The core will print out details now.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:59 +02:00
Wolfram Sang
e907972be3 watchdog: add error messages when initializing timeout fails
This not only removes boilerplate code from watchdog drivers, it can
also be more specific which of the supplied value actually fails. Also,
the loglevel becomes now consistent across drivers.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:59 +02:00
Wolfram Sang
34ef4087a1 watchdog: refactor watchdog_init_timeout
The function is not easy to read and has a problem: -EINVAL is returned
when the module parameter is invalid but the DT parameter is OK.

Refactor the code to have the same pattern of checks for the module
parameter and DT. Further ones can be easily added in the future if the
need arises. The above mentioned problem is fixed, too.

Some documentation is added to describe the different handlings of '0'
for the module parameter and the DT property.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:58 +02:00
Wolfram Sang
e184312649 watchdog: renesas_wdt: drop superfluous glob pattern
If we want to match all revisions, it is enough to leave the field
empty.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:58 +02:00
Wolfram Sang
280ce5c006 watchdog: da9063_wdt: parse DT for timeout value, too
And make sure the final obtained value gets properly scaled. Remove two
empty lines to group the initialization blocks while we are here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:57 +02:00
Colin Ian King
36ccec3db8 watchdog: intel_scu_watchdog: fix spelling mistake: "set_hearbeat" -> "set_heartbeat"
There is a spelling mistake in a pr_debug message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:57 +02:00
Alexandre Belloni
9d7c09231e watchdog: pnx4008: readout watchdog state
Readout the enabled state so it is possible to get the pre-userspace
handler working. Also, avoid disabling the watchdog to ensure it continues
working and triggers if there is an issue later in the boot or if userspace
fails to start.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:04:56 +02:00
Gustavo A. R. Silva
0843bdc14c watchdog: machzwd: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/watchdog/machzwd.c: In function ‘zf_set_timer’:
./arch/x86/include/asm/io.h:355:14: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define outw outw
drivers/watchdog/machzwd.c:80:53: note: in expansion of macro ‘outw’
 #define zf_writew(port, data)  { outb(port, INDEX); outw(data, DATA_W); }
                                                     ^~~~
drivers/watchdog/machzwd.c:179:3: note: in expansion of macro ‘zf_writew’
   zf_writew(COUNTER_1, new);
   ^~~~~~~~~
drivers/watchdog/machzwd.c:180:2: note: here
  case WD2:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:38 +02:00
Guenter Roeck
8862c1f2b0 watchdog: pnx4008_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:37 +02:00
Guenter Roeck
81df6db681 watchdog: mpc8xxx_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
  This also drops the inaccurate message on remove; the driver won't be
  removed if the hardware watchdog is running, no matter if the watchdog
  device is open or not.
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:37 +02:00
Guenter Roeck
02189bb91e watchdog: jz4740_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly. Also, there is no call to dev_get_drvdata()
or platform_get_drvdata() in the driver, so drop the unnecessary
call to platform_set_drvdata().

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:37 +02:00
Guenter Roeck
570927df46 watchdog: rt2880_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:36 +02:00
Guenter Roeck
6fef817e2d watchdog: mt7621_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:36 +02:00
Guenter Roeck
fd56d6c9a2 watchdog: loongson1_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:36 +02:00
Guenter Roeck
1f22b8ca6b watchdog: pic32-wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:36 +02:00
Guenter Roeck
a02b3d7cde watchdog: pic32-dmt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:35 +02:00
Guenter Roeck
89e5b7aca1 watchdog: ux500_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:35 +02:00
Guenter Roeck
1f53305877 watchdog: stm32_iwdg: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:35 +02:00
Guenter Roeck
6ba3793cc1 watchdog: zx2967_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:34 +02:00
Guenter Roeck
f7daaa8d1e watchdog: sbsa_gwdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:34 +02:00
Guenter Roeck
01022e3390 watchdog: imx_sc_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:34 +02:00
Guenter Roeck
b90abaace6 watchdog: xen_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:33 +02:00
Guenter Roeck
30f57e0f22 watchdog: wm831x_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:33 +02:00
Guenter Roeck
edaa35b557 watchdog: wdat_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:33 +02:00
Guenter Roeck
b1f4718218 watchdog: uniphier_wdt: drop platform_set_drvdata
There is no call to dev_get_drvdata() or platform_get_drvdata() in the
driver. Drop the unnecessary call to platform_set_drvdata().

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:32 +02:00
Guenter Roeck
b42488bcd6 watchdog: twl4030_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:32 +02:00
Guenter Roeck
16c4614f1e watchdog: ts72xx_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:32 +02:00
Guenter Roeck
44affc086e watchdog: ts4800_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:31 +02:00
Guenter Roeck
09fb6d010a watchdog: tqmx86_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:31 +02:00
Guenter Roeck
edad752805 watchdog: tegra_wdt: Use watchdog_stop_on_unregister and other improvements
Use watchdog_stop_on_unregister() in probe instead of calling
tegra_wdt_stop() in the remove function. Also introduce local variable
'struct device *dev' and use it instead of dereferencing it repeatedly.
Finally, drop the now empty remove function.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:31 +02:00
Bryan Tan
0a48f239bf watchdog: wdat_wdt: fix get_timeleft call for wdat_wdt
The get_timeleft call for wdat_wdt was using ACPI_WDAT_GET_COUNTDOWN
when running an action on the device, which would return the configured
countdown, instead of ACPI_WDAT_GET_CURRENT_COUNTDOWN, which returns the
time left before the watchdog will fire. This change corrects that.

Signed-off-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:30 +02:00
Guenter Roeck
c838a3ae61 watchdog: tangox_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Replace stop on remove with call to watchdog_stop_on_unregister()
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:30 +02:00
Guenter Roeck
8ba41f6c4c watchdog: sunxi_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:29 +02:00
Guenter Roeck
d07c4ad8b2 watchdog: stpmic1_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:29 +02:00
Guenter Roeck
55082c0301 watchdog: stmp3xxx_rtc_wdt: Convert to use device managed functions
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:28 +02:00
Guenter Roeck
cfe9ee3ab3 watchdog: st_lpc_wdt: Convert to use device managed functions
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:28 +02:00
Guenter Roeck
78d9bfad2e watchdog: sprd_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Replace devm_add_action() followed by failure action with
  devm_add_action_or_reset()
- Replace 'val = e; return val;' with 'return e;'
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:28 +02:00
Guenter Roeck
72dbc27c83 watchdog: sirfsoc_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Replace shutdown function with call to watchdog_stop_on_reboot()
- Replace stop on remove with call to watchdog_stop_on_unregister()
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:27 +02:00
Guenter Roeck
dcc3ce0b7d watchdog: sama5d4_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Replace stop on remove with call to watchdog_stop_on_unregister()
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:27 +02:00
Guenter Roeck
2361ac5289 watchdog: rza_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:27 +02:00
Guenter Roeck
553140a016 watchdog: rtd119x_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Replace 'of_clk_get(np, 0)' with 'devm_clk_get(dev, NULL)'
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:26 +02:00
Guenter Roeck
cc71859708 watchdog: rn5t618_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:26 +02:00
Guenter Roeck
bba07e6ed7 watchdog: qcom-wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:26 +02:00
Guenter Roeck
9723a82a97 watchdog: pm8916_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:26 +02:00
Guenter Roeck
801cdffe68 watchdog: of_xilinx_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:25 +02:00
Guenter Roeck
7e6437e1b0 watchdog: npcm_wdt: Use local variable 'dev' consistently
Use local variable 'struct device *dev' consistently.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:25 +02:00
Guenter Roeck
a15f6e646b watchdog: mtk_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:25 +02:00
Guenter Roeck
615e40ad40 watchdog: moxart_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Replace 'of_clk_get(np, 0)' with 'devm_clk_get(dev, NULL)'
- Use local variable 'struct device *dev' consistently
- Replace stop on remove with call to watchdog_stop_on_unregister()
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:24 +02:00
Guenter Roeck
099e303975 watchdog: mlx_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:24 +02:00
Guenter Roeck
dd1c66e22e watchdog: meson_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:24 +02:00
Guenter Roeck
1678f83095 watchdog: meson_gxbb_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:23 +02:00
Guenter Roeck
0c4ece9bfd watchdog: menf21bmc_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Cc: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:23 +02:00
Guenter Roeck
94ac20d831 watchdog: mena21_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:23 +02:00
Guenter Roeck
b6e6bf4f99 watchdog: max77620_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Replace stop on remove with call to watchdog_stop_on_unregister()
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:22 +02:00
Guenter Roeck
80cb6bddeb watchdog: max63xx_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:22 +02:00
Guenter Roeck
d2a10c312a watchdog: lpc18xx_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:22 +02:00
Guenter Roeck
4689ba9755 watchdog: kempld_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:21 +02:00
Guenter Roeck
b7b6adf32c watchdog: intel-mid_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:21 +02:00
Guenter Roeck
1f25cb2892 watchdog: imgpdc_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:20 +02:00
Guenter Roeck
77d9f766fe watchdog: iTCO_wdt: Various improvements
Various coccinelle driven transformations as detailed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Use watchdog_stop_on_unregister to stop the watchdog on remove
- Drop assignments to otherwise unused variables
- Drop empty remove function

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:20 +02:00
Guenter Roeck
3564fbc54f watchdog: gpio_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:19 +02:00
Guenter Roeck
ca05c2e251 watchdog: ftwdt010_wdt: Use 'dev' consistently
Use local variable 'dev' consistently.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:19 +02:00
Guenter Roeck
d6ab05106a watchdog: ep93xx_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:19 +02:00
Guenter Roeck
cecda01051 watchdog: davinci_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:18 +02:00
Guenter Roeck
865802917f watchdog: da9063_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:17 +02:00
Guenter Roeck
6e8a7c75d7 watchdog: da9062_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly. Also replace 'ret = func(); return ret;'
with 'return func();'.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:17 +02:00
Guenter Roeck
862c13b551 watchdog: da9055_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:16 +02:00
Guenter Roeck
f7e29623e2 watchdog: da9052_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:16 +02:00
Guenter Roeck
605d8c4f33 watchdog: cadence_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Replace 'goto l; ... l: return e;' with 'return e;'
- Replace 'val = e; return val;' with 'return e;'
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:16 +02:00
Guenter Roeck
4062ec06b7 watchdog: bcm_kona_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:16 +02:00
Guenter Roeck
69656dcd4f watchdog: bcm7038_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Use local variable 'struct device *dev' consistently
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:15 +02:00
Guenter Roeck
dcbb613fa8 watchdog: bcm2835_wdt: drop platform_set_drvdata
There is no call to platform_get_drvdata() in the driver,
so platform_set_drvdata() is unnecessary and can be dropped.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:15 +02:00
Guenter Roeck
f332ce5d88 watchdog: atlas7_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Replace 'of_clk_get(np, 0)' with 'devm_clk_get(dev, NULL)'
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:15 +02:00
Guenter Roeck
eda21ee945 watchdog: aspeed_wdt: Use 'dev' instead of dereferencing it repeatedly
Introduce local variable 'struct device *dev' and use it instead of
dereferencing it repeatedly.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:14 +02:00
Guenter Roeck
f57df83528 watchdog: asm9260_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Replace 'goto l; ... l: return e;' with 'return e;'
- Introduce local variable 'struct device *dev' and use it instead of
  dereferencing it repeatedly
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:14 +02:00
Guenter Roeck
b09c153927 watchdog: armada_37xx_wdt: Convert to use device managed functions and other improvements
Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
Other improvements as listed below.

The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts
used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches

- Drop assignments to otherwise unused variables
- Drop unnecessary braces around conditional return statements
- Drop empty remove function
- Use devm_add_action_or_reset() for calls to clk_disable_unprepare
- Use devm_watchdog_register_driver() to register watchdog device
- Replace shutdown function with call to watchdog_stop_on_reboot()

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:14 +02:00
Georg Hofmann
b07e228eee watchdog: imx2_wdt: Fix set_timeout for big timeout values
The documentated behavior is: if max_hw_heartbeat_ms is implemented, the
minimum of the set_timeout argument and max_hw_heartbeat_ms should be used.
This patch implements this behavior.
Previously only the first 7bits were used and the input argument was
returned.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:13 +02:00
Hariprasad Kelam
33052fbb4f watchdog: machzwd : fix warning Using plain integer as NULL pointer
Changes passing function argument 0 to NULL to avoid below sparse
warning

 CHECK   drivers/watchdog//machzwd.c
drivers/watchdog//machzwd.c:321:25: warning: Using plain integer as NULL
pointer

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:13 +02:00
Guenter Roeck
8dd29f1951 watchdog: rtd119x_wdt: Fix remove function
The driver registers the watchdog with devm_watchdog_register_device() but
still calls watchdog_unregister_device() on remove. Since clocks have to
be stopped when removing the driver, after the watchdog device has been
unregistered, we can not drop the call to watchdog_unregister_device().
Use watchdog_register_device() to register the watchdog.

Fixes: 2bdf6acbfe ("watchdog: Add Realtek RTD1295")
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:13 +02:00
YueHaibing
e2a4aeda87 watchdog: sb_wdog: Make sbwdog_set and sbwdog_pet static
Fix sparse warning:

drivers/watchdog/sb_wdog.c:70:6: warning: symbol 'sbwdog_set' was not declared. Should it be static?
drivers/watchdog/sb_wdog.c:84:6: warning: symbol 'sbwdog_pet' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:12 +02:00
Gustavo A. R. Silva
265d11ccd5 watchdog: alim7101: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/alim7101_wdt.c: In function ‘fop_ioctl’:
drivers/watchdog/alim7101_wdt.c:279:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wdt_keepalive();
   ^~~~~~~~~~~~~~~
drivers/watchdog/alim7101_wdt.c:282:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Notice that, in this particular case, the /* Fall through */
comment is placed at the very bottom of the case statement,
which is what GCC is expecting to find.

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:12 +02:00
Guenter Roeck
0f0a6a285e watchdog: Convert to use devm_platform_ioremap_resource
Use devm_platform_ioremap_resource to reduce source code size,
improve readability, and reduce the likelyhood of bugs.

The conversion was done automatically with coccinelle using the
following semantic patch.

@r@
identifier res, pdev;
expression a;
expression index;
expression e;
@@

<+...
- res = platform_get_resource(pdev, IORESOURCE_MEM, index);
- a = devm_ioremap_resource(e, res);
+ a = devm_platform_ioremap_resource(pdev, index);
...+>

@depends on r@
identifier r.res;
@@
- struct resource *res;
  ... when != res

@@
identifier res, pdev;
expression index;
expression a;
@@
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, index);
- a = devm_ioremap_resource(&pdev->dev, res);
+ a = devm_platform_ioremap_resource(pdev, index);

Cc: Joel Stanley <joel@jms.id.au>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Michal Simek <michal.simek@xilinx.com> (cadence/xilinx wdts)
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:12 +02:00
Anson Huang
24b8225619 watchdog: imx2_wdt: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:11 +02:00
Anson Huang
986857acbc watchdog: imx_sc: Add i.MX system controller watchdog support
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and watchdog etc..

This patch adds i.MX system controller watchdog driver support,
watchdog operation needs to be done in secure EL3 mode via
ARM-Trusted-Firmware, using SMC call, CPU will trap into
ARM-Trusted-Firmware and then it will request system controller
to do watchdog operation via IPC.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:11 +02:00
Matti Vaittinen
bbc88a0ec9 watchdog: bd70528: Initial support for ROHM BD70528 watchdog block
Initial support for watchdog block included in ROHM BD70528
power management IC.

Configurations for low power states are still to be checked.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:10 +02:00
Ji-Ze Hong (Peter Hong)
e347afa5fb watchdog: f71808e_wdt: fix F81866 bit operation
Fix error bit operation in watchdog_start()

Fixes: 14b24a88a3 ("watchdog: f71808e_wdt: Add F81866 support")
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:10 +02:00
Ji-Ze Hong (Peter Hong)
a3f764d2ee watchdog: f71808e_wdt: separate declaration and assignment
Separate declaration and assignment in watchdog_start()

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:09 +02:00
Matteo Croce
f6cc8b355c watchdog: i6300esb: stop printing kernel addresses
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
i6300esb prints "____ptrval____" instead of actual addresses:

    i6300ESB timer 0000:00:03.0: initialized (0x(____ptrval____)). heartbeat=30 sec (nowayout=1)

Instead of changing the print to "%px", and leaking kernel addresses,
just remove the print completely, cfr. e.g. commit 071929dbdd
("arm64: Stop printing the virtual memory layout").

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:09 +02:00
Vladimir Zapolskiy
a223770bfa watchdog: fix compile time error of pretimeout governors
CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o
object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE
is selected, so it rightfully makes sense to add it as a dependency.

The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n
and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected:

  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register':
  drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister':
  drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor'

  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register':
  drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister':
  drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor'

Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu>
Fixes: ff84136cb6 ("watchdog: add watchdog pretimeout governor framework")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:09 +02:00
Chris Packham
56fb196525 watchdog: orion_wdt: remove orion_wdt_set_timeout
The watchdog core will do the same thing if no set_timeout
is supplied so we can safely remove orion_wdt_set_timeout.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05 21:02:08 +02:00
Marc Zyngier
eae1ddc615 watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
Only arch_timer_read_counter will guarantee that workarounds are
applied. So let's use this one instead of arch_counter_get_cntvct.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-30 16:09:27 +01:00
Linus Walleij
9540724ca2 ARM: ixp4xx: Add device tree boot support
This adds a minimal support for booting IXP4xx systems
from device tree.

We have to add hacks to the QMGR, NPE and notably also
ethernet and watchdog drivers so that they don't crash
the platform: these drivers are unconditionally starting
to grab regions of statically remapped IO space with no
concern of the device model or other platforms.

We will go in and properly fix these drivers as we go
along but for now this hack gets us to a place where we
can start working on proper device tree support for these
platforms.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Torvalds
a089e4fed5 linux-watchdog 5.1-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlyFIfgACgkQ+iyteGJfRsqt4gCgrgwSrDhwW+u7NjyY48KGAPgt
 xM8AoM31H9C2HrT2IJuKa3FjIawceUfw
 =wj0o
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the Mellanox systems

 - renesas-wdt: Document r8a77470 support

 - numerous 'Mark expected switch fall-throughs'

 - qcom: Add suspend/resume support

 - some small fixes and documentation updates

* tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83877f_wdt: Mark expected switch fall-through
  watchdog: sc520_wdt: Mark expected switch fall-through
  watchdog: sbc60xxwdt: Mark expected switch fall-through
  watchdog: smsc37b787_wdt: Mark expected switch fall-through
  watchdog: sc1200: Mark expected switch fall-through
  watchdog: pc87413: Mark expected switch fall-through
  Documentation/watchdog: Add documentation mlx-wdt driver
  watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
  platform_data/mlxreg: additions for Mellanox watchdog driver.
  watchdog: Update sysfs documentation.
  watchdog: dw: remove useless pr_fmt
  watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  watchdog/hpwdt: Update Kconfig documentation
  dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  watchdog: qcom: Add suspend/resume support
2019-03-11 11:22:15 -07:00
Linus Torvalds
cf2e8c544c - New Drivers
- Add STMPE ADC Input driver
    - Add STMicroelectronics STPMIC1 Parent driver
    - Add STMicroelectronics STPMIC1 OnKey Misc driver
    - Add STMicroelectronics STPMIC1 Watchdog driver
    - Add Cirrus Logic Lochnagar Parent driver
    - Add TQ-Systems TQMX86 Parent driver
 
  - New Device Support
    - Add support for ADC to STMPE
 
  - New (or moved) Functionality
    - Move Lightbar functionality to its own driver; cros_ec_lightbar
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move DebugFS functionality to its own driver; cros_ec_debugfs
    - Move SYSFS functionality to its own driver; cros_ec_sysfs
    - Add support for input voltage options; tps65218
 
  - Fix-ups
    - Use devm_* managed resources; cros_ec
    - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
    - Trivial Clean-ups; stmpe
    - Rip out broken modular code; aat2870-core, adp5520, as3711,
          db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
 	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
 	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
    - Kconfig fixups; INTEL_SOC_PMIC
    - Improve error path; sm501, sec-core
    - Use struct_size() helper; sm501
    - Constify; at91-usart
    - Use pointers instead of copying data; at91-usart
    - Deliver proper return value; cros_ec_dev
    - Trivial formatting/whitespace; sec-core
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlyA5j4ACgkQUa+KL4f8
 d2EAyw/+N7N77ex5Ryxmyn61SWvgTL221tj+olw6RqC92Vfw6S2ZFP1CsM/E7tZb
 qCLYkkJSgBLKoOCI5OLiXsvWCPjyLU33nG/oS0SSiMJ1Fp9M0h7uRnOtOio3z31i
 w9MJAvEY3RN8I1bRGMO6aWUtT0q3AzHNtdl+7BqAkjjeXiUE0lGd5eARRS1zRWSa
 ki0OzUkJeszPk+6E6N0K+BQZxcL3cBEsR8ZAif903cMEbqsJIv4nmif4b5D63BKH
 PtOLn+6HVMG4bzqRRytVhcO/z2uj2jlLCHH9wBnyd4b7SoLFuz15yN5DhD4bKLt7
 0UMqiBlC2MeaTv3wyKjeNPQtaMY7zJNUpdFly1PHAYR4oy5kbqk2IAv30N/zRfPK
 zLmWWq7DYdazBxSSGKmpGEW63Dkr/MQY2oj4nUlcank/X0K7LvmXv7kIxp9jJhA5
 bE76f77uHneHvq5OTc5CZtaYNqZbE6tO8rqZ2QlfCqa0M8VxbcrYiym0fQFJBdsH
 eFtaTG162ssZq1npV759c4/2E3zQ3EW+rj89/AWp8ViJULQLyPY2nUYddx+w04Se
 kSdgYCvMI5byvF+Tuq/CbUWz7kyca3D+EFiYTkzIfrZr+4yiG2VO8wEO1knkEUVo
 9X/wnAD5hQJePEM8CyPZrnirndB0W6SAvSmRZlF/OAbuCBz1DkQ=
 =tUge
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add STMPE ADC Input driver
   - Add STMicroelectronics STPMIC1 Parent driver
   - Add STMicroelectronics STPMIC1 OnKey Misc driver
   - Add STMicroelectronics STPMIC1 Watchdog driver
   - Add Cirrus Logic Lochnagar Parent driver
   - Add TQ-Systems TQMX86 Parent driver

  New Device Support:
   - Add support for ADC to STMPE

  New (or moved) Functionality:
   - Move Lightbar functionality to its own driver; cros_ec_lightbar
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move DebugFS functionality to its own driver; cros_ec_debugfs
   - Move SYSFS functionality to its own driver; cros_ec_sysfs
   - Add support for input voltage options; tps65218

  Fixes:
   - Use devm_* managed resources; cros_ec
   - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
   - Trivial Clean-ups; stmpe
   - Rip out broken modular code; aat2870-core, adp5520, as3711,
         db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
   - Kconfig fixups; INTEL_SOC_PMIC
   - Improve error path; sm501, sec-core
   - Use struct_size() helper; sm501
   - Constify; at91-usart
   - Use pointers instead of copying data; at91-usart
   - Deliver proper return value; cros_ec_dev
   - Trivial formatting/whitespace; sec-core"

* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: mxs-lradc: Mark expected switch fall-through
  mfd: sec-core: Cleanup formatting to a consistent style
  mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
  mfd: intel-lpss: Move linux/pm.h to the local header
  mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
  mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
  mfd: at91-usart: No need to copy mfd_cell in probe
  mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
  mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
  mfd: lochnagar: Add initial binding documentation
  dt-bindings: mfd: aspeed-lpc: Make parameter optional
  mfd: sec-core: Return gracefully instead of BUG() if device cannot match
  mfd: sm501: Use struct_size() in devm_kzalloc()
  mfd: sm501: Fix potential NULL pointer dereference
  mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
  mfd: tps65218.c: Add input voltage options
  mfd: wm8400-core: Make it explicitly non-modular
  mfd: wm8350-core: Drop unused module infrastructure from non-modular code
  mfd: wm8350-i2c: Make it explicitly non-modular
  mfd: wm831x-core: Drop unused module infrastructure from non-modular code
  ...
2019-03-08 10:02:58 -08:00
Gustavo A. R. Silva
458c8961c1 watchdog: w83877f_wdt: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/w83877f_wdt.c: In function ‘fop_ioctl’:
drivers/watchdog/w83877f_wdt.c:294:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wdt_keepalive();
   ^~~~~~~~~~~~~~~
drivers/watchdog/w83877f_wdt.c:297:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:22 +01:00
Gustavo A. R. Silva
e70d3547fc watchdog: sc520_wdt: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/sc520_wdt.c: In function ‘fop_ioctl’:
drivers/watchdog/sc520_wdt.c:326:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wdt_keepalive();
   ^~~~~~~~~~~~~~~
drivers/watchdog/sc520_wdt.c:329:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:22 +01:00
Gustavo A. R. Silva
3612b87d18 watchdog: sbc60xxwdt: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/sbc60xxwdt.c: In function ‘fop_ioctl’:
drivers/watchdog/sbc60xxwdt.c:272:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wdt_keepalive();
   ^~~~~~~~~~~~~~~
drivers/watchdog/sbc60xxwdt.c:275:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:21 +01:00
Gustavo A. R. Silva
4a1b116156 watchdog: smsc37b787_wdt: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/smsc37b787_wdt.c: In function ‘wb_smsc_wdt_ioctl’:
drivers/watchdog/smsc37b787_wdt.c:480:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wb_smsc_wdt_set_timeout(timeout);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/smsc37b787_wdt.c:482:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:21 +01:00
Gustavo A. R. Silva
51c802f57a watchdog: sc1200: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/sc1200wdt.c: In function ‘sc1200wdt_ioctl’:
drivers/watchdog/sc1200wdt.c:241:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   sc1200wdt_write_data(WDTO, timeout);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/sc1200wdt.c:244:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:21 +01:00
Gustavo A. R. Silva
8baee57218 watchdog: pc87413: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/watchdog/pc87413_wdt.c: In function ‘pc87413_ioctl’:
drivers/watchdog/pc87413_wdt.c:439:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   pc87413_refresh();
   ^~~~~~~~~~~~~~~~~
drivers/watchdog/pc87413_wdt.c:441:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:20 +01:00
Michael Shych
c60923dd5f watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
Introduce watchdog driver for a various range of Mellanox Ethernet and
Infiniband switch systems.

Watchdog driver for Mellanox watchdog devices, implemented in
programmable logic device.

Main and auxiliary watchdog devices can exist on the same system.
There are several actions that can be defined in the watchdog:
system reset, start fans on full speed and increase a counter.
The last 2 actions are performed without a system reset.
Actions without reset are provided for auxiliary watchdog devices,
which is optional.
Access to HW registers is performed through generic
regmap interface.

There are 2 types of HW watchdog implementations.
Type 1: actual HW timeout can be defined as power of 2 msec.
e.g. timeout 20 sec will be rounded up to 32768 msec.;
maximum timeout period is 32 sec (32768 msec.);
get time-left isn't supported
Type 2: actual HW timeout is defined in sec. and it's the same as
user-defined timeout;
maximum timeout is 255 sec;
get time-left is supported;

Watchdog driver is probed from the common mlx_platform driver.

Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:20 +01:00
Jisheng Zhang
b6ce9c7394 watchdog: dw: remove useless pr_fmt
When switch to watchdog infrastructure, pr_* usage is removed, so
there's no any users of the pr_fmt, remove it.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:18 +01:00
YueHaibing
da39013e8e watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
There is no need to have the 'post1' variable static since
new value always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:18 +01:00
Jerry Hoemann
00fd20b4d9 watchdog/hpwdt: Update Kconfig documentation
Update documentation relating to HPWDT_NMI_DECODING to reflect its
current usage.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:17 +01:00
Arnd Bergmann
187b4ac7df This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
 
 - Stefan updates the BCM2835 SoC driver with downstream properties and
   uses that to implement a reboot notifier to tell the VC4 firmware when
   Linux on the ARM CPU is rebooting
 
 - Eric adds a proper power domain driver for the BCM283x SoCs and
   updates a bunch of drivers to have a better and clearer Device Tree
   definition to support power domains/breaking up of functionality. This
   requires converting the existing watchdog driver into a MFD and then
   breaking up the functionality into separate drivers and finally
   updating the DTS files to leverage the power domains information.
 
 - Wei provides a fix for making a symbol static
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxV0IYACgkQh9CWnEQH
 BwQIHA//TL12EfHws6C64EKspqsg9NE5/+K3HRRJbgwtuBQ/n6oYBMyJx+6x6Nwc
 7QjuCkZ/VWKxy0Fn+ToGnX0JgrQL5kND3Cm0d8cyZ0VJ6juppizyAa1YkFplShSr
 l0XlYaJo1HrB3hBd/+YbGZnLp9flbii5d3MIcy8ZoWmN7zLeHnQbHaf8jcbJC+Iw
 Mal8ojk2ru0rMimMQieTiPzWwiec08wtSIYs2590rOVWFyhGIn/KmHqpG6iYjdwj
 oQbr86R0jMPCb/g3SXRttxW8wFbtYdmILdkzhOaEd4JyJEwUCNDciM3E04OyE9VN
 fNMc1l0zh7dfyo9bFRpgS6AAxYQVj3led+B1NGtpnjDPybVWU10gipGdgFt9UPRE
 pJnS1LcPbAJ1FdbcYFU0TsiViWLZehm2cbc4rPYvqKp1Y+82FJZTYyu0GmBOUwB6
 jpM5ZVvET8k3nw6ImeE3jjT3kBfF31u552+iO4RQvKHRm/GBMtyTDrFZVUwgqMFE
 NEKnj3/VLSCxP3dnQImw1ro2493piZNdlBEs6mAugFUGqcb+40KOtOOpWiGMFH7h
 BZN0kj128ryG/YCVKDOnZSbYRLhpxc1VcVYJ3rYJgn8mrFFmNo/fjDgaRogrJN/s
 LmCiSIqsmuy8f36/IWd+aHk6ex5yskJe7x5M/7tlmz03oXg1viQ=
 =t5+u
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:

- Stefan updates the BCM2835 SoC driver with downstream properties and
  uses that to implement a reboot notifier to tell the VC4 firmware when
  Linux on the ARM CPU is rebooting

- Eric adds a proper power domain driver for the BCM283x SoCs and
  updates a bunch of drivers to have a better and clearer Device Tree
  definition to support power domains/breaking up of functionality. This
  requires converting the existing watchdog driver into a MFD and then
  breaking up the functionality into separate drivers and finally
  updating the DTS files to leverage the power domains information.

- Wei provides a fix for making a symbol static

* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
  ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
  soc: bcm: bcm2835-pm: Make local symbol static
  soc: bcm: Make PM driver default for BCM2835
  soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
  firmware: raspberrypi: notify VC4 firmware of a reboot
  soc: bcm2835: sync firmware properties with downstream

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15 18:01:17 +01:00
Sai Prakash Ranjan
671cdde36e watchdog: qcom: Add suspend/resume support
This adds the support for qcom watchdog suspend and resume
when entering and exiting deep sleep states. Otherwise
having watchdog active after suspend would result in unwanted
crashes/resets if resume happens after a long time.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-02-02 14:06:36 +01:00
Lee Jones
fa56a62d01 Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and 'ib-mfd-platform-5.1' into ibs-for-mfd-merged 2019-02-01 08:20:04 +00:00
Pascal PAILLET-LME
28804c2c8f watchdog: stpmic1: Add STPMIC1 watchdog driver
The STPMIC1 PMIC embeds a watchdog which is disabled by default. As soon
as the watchdog is started, it must be refreshed periodically otherwise
the PMIC goes off.

Signed-off-by: Pascal Paillet <p.paillet@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-16 14:01:19 +00:00
Eric Anholt
5e6acc3e67 bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
The PM block that the wdt driver was binding to actually has multiple
features we want to expose (power domains, reset, watchdog).  Move the
DT attachment to a MFD driver and make WDT probe against MFD.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2019-01-09 16:55:06 +01:00
Dan Carpenter
4a22fc534f watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs
These functions return NULL on error but we accidentally check
for IS_ERR() instead.

Fixes: e3c21e088f ("watchdog: tqmx86: Add watchdog driver for the IO controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-01-07 10:10:35 +01:00
NeilBrown
3aa8b8bbc1 watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
These files need
   #include <linux/mod_devicetable.h>
to compile correctly.

Fixes: ac3167257b ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-01-07 10:10:35 +01:00
Linus Torvalds
115502a6f3 linux-watchdog 4.21-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlwopYUACgkQ+iyteGJfRsqOZwCfXM0u0XQJS6TZFtEOZp5gKq+d
 f/4AnRXcblmb1wJiEVItizB03leOWHqk
 =jry0
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 - add TQ-Systems TQMX86 watchdog driver
 - add Qualcomm PM8916 watchdog driver
 - w83627hf_wdt: add quirk for Inves system
 - renesas_wdt: several improvements and document r8a774c0 support
 - mena21_wdt, mtx-1: Convert to use GPIO descriptor
 - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
 - documentation: add PM usage and kernel-api: don't reference removed functions
 - update bindings for MT7629 SoC
 - several small fixes

* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
  watchdog: tqmx86: Add watchdog driver for the IO controller
  dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  watchdog: docs: kernel-api: don't reference removed functions
  watchdog: add documentation for PM usage
  watchdog: mtx-1: Convert to use GPIO descriptor
  watchdog: mena21_wdt: Convert to GPIO descriptors
  dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  watchdog: Add pm8916 watchdog driver
  dt-bindings: watchdog: update bindings for MT7629 SoC
  watchdog: renesas_wdt: don't keep timer value during suspend/resume
  watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  watchdog/hpwdt: Update driver version.
  watchdog/hpwdt: Do not claim unsupported hardware
  watchdog/hpwdt: Exclude via blacklist
  Watchdog: remove outdated comment
  watchdog: w83627hf_wdt: Add quirk for Inves system
  watchdog: cpwd: add of_node_put()
  watchdog: renesas_wdt: don't set divider while watchdog is running
  ...
2019-01-01 13:16:45 -08:00
Andrew Lunn
e3c21e088f watchdog: tqmx86: Add watchdog driver for the IO controller
Some TQ-Systems ComExpress modules have an IO controller with a
watchdog timer.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-24 13:15:07 +01:00
Linus Walleij
d2b911db8b watchdog: mtx-1: Convert to use GPIO descriptor
This converts the MTX-1 driver to grab a GPIO descriptor
associated with the device instead of using a resource with
a global GPIO number. Augment the driver and the boardfile.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-24 08:27:56 +01:00
Linus Walleij
22ec9bb1cb watchdog: mena21_wdt: Convert to GPIO descriptors
This drops the old OF API use to look up global GPIO
numbers and replace it with the GPIO descriptor API.

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:34 +01:00
Loic Poulain
969c0acc03 watchdog: Add pm8916 watchdog driver
The PM816 module is a versatile PMIC with many diverse functions
integrated, including, a watchdog.
This watchdog is subcomponent of the PON (Power On) peripheral,
in the same way as pwrkey/resin buttons.
It works with two timers (2-stages), the first one generates an
IRQ to the main SoC (APQ8016/MSM8916), the second one performs
the reset.

This driver expects the following device hierarchy:
[pm8916]->[pm8916-pon]->[pm8916-wdt]

It uses the pm8916 regmap to access PM8916 registers.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:33 +01:00
Wolfram Sang
9077123c68 watchdog: renesas_wdt: don't keep timer value during suspend/resume
After discussing this mail thread [1] again, we concluded that giving
userspace enough time to prepare is our favourite option. So, do not
keep the time value when suspended but reset it when resuming.

[1] https://patchwork.kernel.org/patch/10252209/

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:32 +01:00
Yangtao Li
248e655b45 watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:32 +01:00
Yangtao Li
57808f448b watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:32 +01:00
Colin Ian King
b1bbb0cb2c watchdog: asm9260_wdt: make array mode_name static, shrinks object size
Don't populate the const array mode_name on the stack but instead
make it static. Makes the object code smaller by 41 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   7699	   1872	      0	   9571	   2563	drivers/watchdog/asm9260_wdt.o

After:
   text	   data	    bss	    dec	    hex	filename
   7594	   1936	      0	   9530	   253a	drivers/watchdog/asm9260_wdt.o

(gcc version 8.2.0 x86_64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:31 +01:00
Jerry Hoemann
437a3f8ea4 watchdog/hpwdt: Update driver version.
Bump version number to reflect recent minor changes.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:31 +01:00
Jerry Hoemann
de2cb0cc30 watchdog/hpwdt: Do not claim unsupported hardware
Do not claim when SSID 0x0289 as the watchdog features
are not enabled/validated by the firmware.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:30 +01:00
Jerry Hoemann
94d6b80c45 watchdog/hpwdt: Exclude via blacklist
Instead of having explicit if statments excluding devices,
use a pci_device_id table of devices to blacklist.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-22 12:15:30 +01:00
Jean Delvare
31eb42bd93 watchdog: w83627hf_wdt: Add quirk for Inves system
On some systems, the NCT6791D comes with a companion chip and the
watchdog function is in this companion chip. We must use a different
unlocking sequence to access the companion chip.

Use DMI strings to identify such system and adjust the unlocking
sequence automatically.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-09 15:03:28 +01:00
Yangtao Li
06f8f2ca05 watchdog: cpwd: add of_node_put()
use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-09 15:03:27 +01:00
Wolfram Sang
e990e12741 watchdog: renesas_wdt: don't set divider while watchdog is running
The datasheet says we must stop the timer before changing the clock
divider. This can happen when the restart handler is called while the
watchdog is running.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-12-09 15:03:27 +01:00
Masahiro Yamada
0126be38d9 kbuild: announce removal of SUBDIRS if used
SUBDIRS has been kept as a backward compatibility since
commit ("[PATCH] kbuild: external module support") in 2002.

We do not need multiple ways to do the same thing, so I will remove
SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and
updated the document so that nobody would try to use it.

Meanwhile, display the following warning if SUBDIRS is used.

Makefile:189: ================= WARNING ================
Makefile:190: 'SUBDIRS' will be removed after Linux 5.3
Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:192: ==========================================

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c
Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
2018-12-01 22:21:56 +09:00
Tomer Maimon
7db706a218 watchdog: npcm: Modify npcm watchdog kconfig arch parameter
Modify Nuvoton watchdog Kconfig default supported architecture
name to ARCH_NPCM7XX because ARCH_NPCM750 architecture name
is not supported.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-11-17 09:53:26 +01:00
Fabrizio Castro
f8cde72673 watchdog: renesas_wdt: Fix typos
Do not use "," but ";" to separate instructions.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-11-17 09:53:26 +01:00
Alexey Khoroshilov
cd6ba41c19 watchdog: ts4800: release syscon device node in ts4800_wdt_probe()
Put syscon device node when it is not needed anymore.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-22 10:16:28 +02:00
Marek Behún
c8ca6e70fb watchdog: armada_37xx_wdt: use do_div for u64 division
When the driver is built on 32 bit architectures during compile test,
the linker complains about "__udivdi3" being undefined. We have to use
do_div macro instead of the division operator when dividing u64 value.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13 15:19:43 +02:00
Marek Behún
54e3d9b518 watchdog: Add support for Armada 37xx CPU watchdog
This adds support for the CPU watchdog found on Marvell Armada 37xx
SoCs.

There are 4 counters which can be set as CPU watchdog counters.
This driver uses the second counter (ID 1, counting from 0) as watchdog
counter, and first counter (ID 0) to implement pinging on the second
counter without the need to disable it.

Since counters IDs 2 and 3 are enabled already before even U-Boot
starts, this driver does not use them at all, for example by adding a
device tree property for counter selection.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13 15:19:39 +02:00
Christophe Leroy
38e48b7189 watchdog: mpc8xxx: provide boot status
mpc8xxx watchdog driver supports the following platforms:
- mpc8xx
- mpc83xx
- mpc86xx

Those three platforms have a 32 bits register which provides the
reason of the last boot, including whether it was caused by the
watchdog.

mpc8xx: Register RSR, bit SWRS (bit 3)
mpc83xx: Register RSR, bit SWRS (bit 28)
mpc86xx: Register RSTRSCR, bit WDT_RR (bit 11)

This patch maps the register as defined in the device tree and updates
wdt.bootstatus based on the value of the watchdog related bit. Then
the information can be retrieved via the WDIOC_GETBOOTSTATUS ioctl.

Hereunder is an example of devicetree for mpc8xx,
the Reset Status Register being at offset 0x288:

		WDT: watchdog@0 {
			compatible = "fsl,mpc823-wdt";
			reg = <0x0 0x10 0x288 0x4>;
		};

On the mpc83xx, RSR is at offset 0x910
On the mpc86xx, RSTRSCR is at offset 0xe0094

Suggested-by: Radu Rendec <radu.rendec@gmail.com>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # On mpc885
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13 15:19:38 +02:00
Chris Brandt
8e89130632 watchdog: rza_wdt: Support longer timeouts
The RZ/A2 watchdog timer extends the clock source options in order to
allow for longer timeouts.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:29 +02:00
Jerry Hoemann
10d790d1fa watchdog: hpwdt: Disable PreTimeout when Timeout is smaller
During module install, disable pretimeout if the requested timeout
value is not greater than the minimal pretimeout value that is
supported by hardware.

This makes the module load handling of pretimeout consistent
with the ioctl handling of pretimeout.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:28 +02:00
Guenter Roeck
57cbf0e3a0 watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D
The watchdog controller on NCT6796D, NCT6797D, and NCT6798D is compatible
with the wtachdog controller on other Nuvoton chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:28 +02:00
Christophe Leroy
79b10e09bb watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()
mpc8xxx watchdog driver is a platform device drivers, it is
therefore possible to use dev_xxx() messaging rather than pr_xxx()

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:28 +02:00
Hauke Mehrtens
c99d9df1d3 watchdog: lantiq: add get_timeleft callback
This callback will provide the current time left.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:27 +02:00
Hauke Mehrtens
dcd7e04e8e watchdog: lantiq: Convert to watchdog_device
Instead of doing the ioctl handling manually just use register a
watchdog_device and let the watchdog framework do the ioctl handling.

This also removes the ltq_wdt_bootstatus_set typedef and replaces it
with a structure providing the chip specific functions pointer.
The watchdog_init_timeout() function is now used and the initial timeout
can be provided in device tree.
If the watchdog was already activated it will not be stopped any more,
but the settings from the driver will be used and the watchdog subsystem
will take care.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:26 +02:00
Hauke Mehrtens
1f59f8aff9 watchdog: lantiq: update register names to better match spec
Some of the names of the bits were confusing to me.
Now the bits share the same prefix as the register they are set on.

The LTQ_WDT_CR_PWL register (bits 26:25) is the pre warning limit and it
does not turn anything on. It has 4 possible divers 1/2, 1/4, 1/8 and
1/16, this drivers only uses 1/16.
The LTQ_WDT_CR_CLKDIV register bits(25:24) is only configuring a clock
divers and do not turn any thing on too, all possible values are valid
dividers.
Using the LTQ_WDT_SR prefix is also wrong these bits are used in the
LTQ_WDT_CR registers, SR is the status register which is read only.

This uses GENMASK where it is a mask and it uses shifts when a value is
written to some bits.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:26 +02:00
Romain Izard
2e0432f8f8 watchdog: sama5d4: fix timeout-sec usage
When using watchdog_init_timeout to update the default timeout value,
an error means that there is no "timeout-sec" in the relevant device
tree node.

This should not prevent binding of the driver to the device.

Fixes: 976932e400 ("watchdog: sama5d4: make use of timeout-secs provided in devicetree")
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:26 +02:00
Robert P. J. Day
d08ec7bea2 watchdog: fix a small number of "watchog" typos in comments
All typos in comments, should not affect functionality.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:25 +02:00
Kuninori Morimoto
d674ee232b watchdog: rza_wdt: convert to SPDX identifiers
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:25 +02:00
Jean Delvare
5a623ce0a5 watchdog: iTCO_wdt: Remove unused hooks
As the only user of iTCO_vendor_pre_keepalive and
iTCO_vendor_pre_set_heartbeat has just been removed, we can delete
these 2 hooks.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:25 +02:00
Jean Delvare
2c05318ad5 watchdog: iTCO_wdt: Drop option vendorsupport=2
iTCO_vendor_support's option vendorsupport=2 is a gross hack. It
claims to extend the existing iTCO_wdt driver, but in fact programs
a watchdog on a completely different device (Super-I/O) without
requesting its I/O ports and without checking the device ID. This is
an utterly dangerous thing to do.

It also turns out to be unnecessary, because as far as I can tell, the
code in question is basically duplicating what the clean w83627hf_wdt
driver is doing.

My guess is that on these SuperMicro boards which sparkled the
implementation of vendorsupport=2, the watchdog functionality of the
Intel south bridge is not used, and the watchdog feature of some
W83627HF-like Super-I/O chip is used instead. So we should point the
users to the w83627hf_wdt driver.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:24 +02:00
Wolfram Sang
14de99b44b watchdog: renesas_wdt: stop when unregistering
We want to go into a sane state when unregistering. Currently, it
happens that the watchdog stops when unbinding because of RuntimePM
stopping the core clock. When rebinding, the core clock gets reactivated
and the watchdog fires even though it hasn't been opened by userspace
yet. Strange scenario, yes, but sane state is much preferred anyhow.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:24 +02:00
Wolfram Sang
953b9dd772 watchdog: core: fix null pointer dereference when releasing cdev
watchdog_stop() calls watchdog_update_worker() which needs a valid
wdd->wd_data pointer. So, when unregistering the cdev, clear the
pointers after we call watchdog_stop(), not before.

Fixes: bb292ac1c6 ("watchdog: Introduce watchdog_stop_on_unregister helper")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:24 +02:00
Wolfram Sang
3bed02a296 watchdog: renesas_wdt: use SPDX identifier for Renesas drivers
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:23 +02:00
Jerry Hoemann
e1c7f79ea5 watchdog: hpwdt: Update version number.
Bump version number to reflect recent bug fixes.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:22 +02:00
Jerry Hoemann
397a35d418 watchdog: hpwdt: Module paramerter alias.
Add module parameter "timeout" as an alias to "soft_margin."
This aligns hpwdt usage more closely with other WDT while
retaining backwards compatibility.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:22 +02:00
Jerry Hoemann
923014619e watchdog: hpwdt: Display module parameters.
Print module parameters when the driver is loaded.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:22 +02:00
Jerry Hoemann
093d43858d watchdog: hpwdt: Claim NMI from iLO
The hwpdt driver is overloaded for handling both the iLO
watchdog and the explicit "Generate NMI to System" virutal
button.  Hence NMI handler needs to claim NMI resulting
from the virutal button.

Claim if iLO generated accommodating firmware that might
set wrong bit.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:21 +02:00
Jerry Hoemann
4d9186d01e watchdog: hpwdt: Initialize pretimeout from module parameter.
When the pretimeout is specified as a module parameter, the
value should be reflected in hpwdt_dev.pretimeout.  The default
(on) case is correct.  But, when disabling pretimeout, the value
should be set to zero in hpwdt_dev.

When compiling w/o CONFIG_HPWDT_NMI_DECODING defined, the pretimeout
module parameter is ignored and the value internally will be 0.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02 13:32:21 +02:00
Nick Desaulniers
815f0ddb34 include/linux/compiler*.h: make compiler-*.h mutually exclusive
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
recently exposed a brittle part of the build for supporting non-gcc
compilers.

Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and
__GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't
added compiler specific checks for __clang__ or __INTEL_COMPILER.

This is brittle, as they happened to get compatibility by posing as a
certain version of GCC.  This broke when upgrading the minimal version
of GCC required to build the kernel, to a version above what ICC and
Clang claim to be.

Rather than always including compiler-gcc.h then undefining or
redefining macros in compiler-intel.h or compiler-clang.h, let's
separate out the compiler specific macro definitions into mutually
exclusive headers, do more proper compiler detection, and keep shared
definitions in compiler_types.h.

Fixes: cafa0010cd ("Raise the minimum required gcc version to 4.6")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Eli Friedman <efriedma@codeaurora.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 17:31:34 -07:00
Linus Torvalds
6eaac34ff3 linux-watchdog 4.19-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlt2pvIACgkQ+iyteGJfRspSxgCggHiSqO+sb1F+h4QyWlh45o9S
 laAAoJL0ZAXSrlA/rAt5FCKCeSZiNZG2
 =hCTY
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add MEN 16z069 IP-Core driver

 - renesas-wdt: add support for the R8A77990 wdt

 - stm32_iwdg: Add stm32mp1 support and pclk feature

 - sp805_wdt, orion_wdt, sprd_wdt: several improvements

 - imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
2018-08-18 16:16:57 -07:00
Johannes Thumshirn
12aea518a2 watchdog: fix dependencies of menz69_wdt.o
Currently menz69_wdt.ko has a dependency on MCB or COMPILE_TEST. But
it actually needs symbols exported by MCB so the || COMPILE_TEST is
wrong.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-06 17:12:42 +02:00
Srinath Mannam
dc0e4a3bb7 watchdog: sp805: Add clock-frequency property
Use clock-frequency property given in _DSD object
of ACPI device to calculate Watchdog rate as binding
clock devices are not available as device tree.

Note: There is no formal review process for _DSD
properties

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-06 17:12:41 +02:00
Johannes Thumshirn
81ceed41d0 watchdog: add driver for the MEN 16z069 IP-Core
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Michael Moese <mmoese@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:12 +02:00
Wei Yongjun
28e65edd73 watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:12 +02:00
Fabio Estevam
2671a3a31b watchdog: stmp3xxx: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:11 +02:00
Fabio Estevam
cd6100fceb watchdog: imx2_wdt: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:11 +02:00
Ray Jui
fa5072ed8f watchdog: sp805: set WDOG_HW_RUNNING when appropriate
If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should reset the watchdog and
tell the watchdog framework. As a result, ping can be generated from
the watchdog framework, until the userspace watchdog daemon takes over
control

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:11 +02:00
Ray Jui
b800885888 watchdog: sp805: add 'timeout-sec' DT property support
Add support for optional devicetree property 'timeout-sec'.
'timeout-sec' is used in the driver if specified in devicetree.
Otherwise, fall back to driver default, i.e., 60 seconds

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:10 +02:00
Maxim Kochetkov
2421cfd55a watchdog: orion_wdt: Mark watchdog as active when running at probe
If the watchdog is fully enabled and running at probe,
mark it as such so the watchdog core can handle it until
the watchdog device is opened.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[groeck: Updated subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:09 +02:00
Ludovic Barre
c2cf466cca watchdog: stm32: add pclk feature for stm32mp1
This patch adds compatible data to manage pclk clock by
compatible. Adds stm32mp1 support which requires pclk clock.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02 15:57:09 +02:00
Randy Dunlap
ac3167257b headers: separate linux/mod_devicetable.h from linux/platform_device.h
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel.  It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.

   4146 #include <linux/platform_device.h>

After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.

    225 #include <linux/mod_devicetable.h>

This patch was build-tested on 20 different arch-es.

It also makes these drivers SubmitChecklist#1 compliant.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:52:26 +02:00
Linus Torvalds
763f96944c MIPS changes for 4.18
These are the main MIPS changes for 4.18. Rough overview:
 
  (1) MAINTAINERS: Add Paul Burton as MIPS co-maintainer
 
  (2) Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes
 
  (3) Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated
      switch, Ingenic watchdog cleanups
 
 Maintainers:
 
  - Add Paul Burton as MIPS co-maintainer
 
 Miscellaneous:
 
  - Use generic GCC library routines from lib/
    - Add notrace to generic ucmpdi2 implementation
    - Rename compiler intrinsic selects to GENERIC_LIB_*
    - vmlinuz: Use generic ashldi3
 
  - y2038: Convert update/read_persistent_clock() to *_clock64()
    - sni: Remove read_persistent_clock()
 
  - perf: Fix perf with MT counting other threads
    - Probe for per-TC perf counters in cpu-probe.c
    - Use correct VPE ID for VPE tracing
 
 Minor cleanups:
 
  - Avoid unneeded built-in.a in DTS dirs
 
  - sc-debugfs: Re-use kstrtobool_from_user
 
  - memset.S: Reinstate delay slot indentation
 
  - VPE: Fix spelling "uneeded" -> "Unneeded"
 
 Platform support:
 
 BCM47xx:
 
  - Add support for Netgear WNR1000 V3
 
  - firmware: Support small NVRAM partitions
 
  - Use __initdata for LEDs platform data
 
 Ingenic:
 
  - Watchdog driver & platform code improvements:
    - Disable clock after stopping counter
    - Use devm_* functions
    - Drop module remove function
    - Move platform reset code to restart handler in driver
    - JZ4740: Convert watchdog instantiation to DT
    - JZ4780: Fix watchdog DT node
    - qi_lb60_defconfig: Enable watchdog driver
 
 Microsemi:
 
  - Ocelot: Add support for integrated switch
    - pcb123: Connect phys to ports
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS7lRNBWUYtqfDOVL41zuSGKxAj8gUCWx6PaAAKCRA1zuSGKxAj
 8v8JAQCNTrCy4tW4TbOCshOo8mhskGME73BVCpquLdsNcWAVhAD/cC0+DMHxV+eO
 Q/JvLne/N2UssMojF+StX8G+6mIF9g8=
 =qN+K
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.18.

  Rough overview:

   - MAINTAINERS: Add Paul Burton as MIPS co-maintainer

   - Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes

   - Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated
     switch, Ingenic watchdog cleanups

  More detailed  summary:

  Maintainers:

   - Add Paul Burton as MIPS co-maintainer, as I soon won't have access
     to much MIPS hardware, nor enough time to properly maintain MIPS on
     my own.

  Miscellaneous:

   - Use generic GCC library routines from lib/
     - Add notrace to generic ucmpdi2 implementation
     - Rename compiler intrinsic selects to GENERIC_LIB_*
     - vmlinuz: Use generic ashldi3

   - y2038: Convert update/read_persistent_clock() to *_clock64()
     - sni: Remove read_persistent_clock()

   - perf: Fix perf with MT counting other threads
     - Probe for per-TC perf counters in cpu-probe.c
     - Use correct VPE ID for VPE tracing

  Minor cleanups:

   - Avoid unneeded built-in.a in DTS dirs

   - sc-debugfs: Re-use kstrtobool_from_user

   - memset.S: Reinstate delay slot indentation

   - VPE: Fix spelling "uneeded" -> "Unneeded"

  Platform support:

  BCM47xx:

   - Add support for Netgear WNR1000 V3

   - firmware: Support small NVRAM partitions

   - Use __initdata for LEDs platform data

  Ingenic:

   - Watchdog driver & platform code improvements:
     - Disable clock after stopping counter
     - Use devm_* functions
     - Drop module remove function
     - Move platform reset code to restart handler in driver
     - JZ4740: Convert watchdog instantiation to DT
     - JZ4780: Fix watchdog DT node
     - qi_lb60_defconfig: Enable watchdog driver

  Microsemi:

   - Ocelot: Add support for integrated switch
     - pcb123: Connect phys to ports"

* tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  MAINTAINERS: Add Paul Burton as MIPS co-maintainer
  MIPS: ptrace: Make FPU context layout comments match reality
  MIPS: memset.S: Reinstate delay slot indentation
  MIPS: perf: Fix perf with MT counting other threads
  MIPS: perf: Use correct VPE ID when setting up VPE tracing
  MIPS: perf: More robustly probe for the presence of per-tc counters
  MIPS: Probe for MIPS MT perf counters per TC
  MIPS: mscc: Connect phys to ports on ocelot_pcb123
  MIPS: mscc: Add switch to ocelot
  MIPS: JZ4740: Drop old platform reset code
  MIPS: qi_lb60: Enable the jz4740-wdt driver
  MIPS: JZ4780: dts: Fix watchdog node
  MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver
  watchdog: JZ4740: Drop module remove function
  watchdog: JZ4740: Register a restart handler
  watchdog: JZ4740: Use devm_* functions
  watchdog: JZ4740: Disable clock after stopping counter
  MIPS: VPE: Fix spelling mistake: "uneeded" -> "unneeded"
  MIPS: Re-use kstrtobool_from_user()
  MIPS: Convert update_persistent_clock() to update_persistent_clock64()
  ...
2018-06-12 12:56:02 -07:00
Marco Felsch
16a7eec2fc watchdog: da9063: remove duplicated timeout_to_sel calls
Every time da9063_wdt_update_timeout() gets called a timeout_to_sel() is
made because the timeout argument of update_timeout() is the raw
register value. Moving the second<->raw-value translation into
da9063_wdt_update_timeout() removes duplicated code.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-07 12:41:43 +02:00
Marco Felsch
6f4cedb7b4 watchdog: da9063: rename helper function to avoid misunderstandings
_da9063_wdt_set_timeout() is called by da9063_wdg_set_timeout(),
da9063_wdg_start() and da9063_wdg_probe() but the name expect only to be
called by da9063_wdg_set_timeout(). Rename the function to avoid
misunderstandings.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-07 12:41:42 +02:00
Michael Grzeschik
f587e478b5 watchdog: da9062: remove unused code
The patch "watchdog: da9062: use protection delay mechanism from core"
(fb484262) removed the only user of j_time_stamp. This turned into some
leftover functions that are removed with this patch.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06 10:45:33 +02:00
Marco Felsch
be9e9c2ad5 watchdog: da9063: Fix timeout handling during probe
The watchdog can be enabled in previous steps (e.g. the bootloader). Set
the driver default timeout value (8s) if the watchdog is already running
and the HW_RUNNING flag. So the watchdog core framework will ping the
watchdog till the user space activates the watchdog explicit with the
desired timeout value.

Fixes: 5e9c16e376 ("watchdog: Add DA9063 PMIC watchdog driver.")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06 10:45:32 +02:00
Marco Felsch
44ee54aabf watchdog: da9063: Fix updating timeout value
The DA9063 watchdog has only one register field to store the timeout value
and to enable the watchdog. The watchdog gets enabled if the value is
not zero. There is no issue if the watchdog is already running but it
leads into problems if the watchdog is disabled.

If the watchdog is disabled and only the timeout value should be prepared
the watchdog gets enabled too. Add a check to get the current watchdog
state and update the watchdog timeout value on hw-side only if the
watchdog is already active.

Fixes: 5e9c16e376 ("watchdog: Add DA9063 PMIC watchdog driver.")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06 10:45:32 +02:00
Marco Felsch
e46bb55dbc watchdog: da9063: Fix setting/changing timeout
If the timeout value is set more than once the DA9063 watchdog triggers
a reset signal which reset the system.

To update the timeout value we have to disable the watchdog, clear the
watchdog counter value and write the new timeout value to the watchdog.
Clearing the counter value is a feature to be on the safe side because the
data sheet doesn't describe the behaviour of the watchdog counter value
after a watchdog disabling-enable-sequence.

The patch is based on Philipp Zabel's previous patch.

Fixes: 5e9c16e376 ("watchdog: Add DA9063 PMIC watchdog driver.")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06 10:45:31 +02:00
Jia-Ju Bai
343c2302bb watchdog: mena21_wdt: Drop unnecessary mutex lock
There is already a mutex in the watchdog core which serializes
calls to the various API functions.
So the mutex lock "drv->lock" is unnecessary and can be dropped.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 21:25:23 +02:00
Jerry Hoemann
62290a5c19 watchdog: hpwdt: Claim NMIs generated by iLO5
On iLO5 going forward we want to return and not claim the NMI, if
the NMI was NOT gnerated by the iLO as a result of the watchdog
timing out or an explicit generate NMI.

The sense of the test in is inverted and prevents hpwdt_pretimeout
from claiming NMIs when it should.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Fixes: a042229a18 ("watchdog: hpwdt: Update nmi_panic message.")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21 21:24:42 +02:00
Jongsung Kim
6c5c0d48b6 watchdog: sp805: add restart handler
Add restart handler for SP805 watchdog so that the driver can be
used to reboot the system.

Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21 21:24:41 +02:00
Geert Uytterhoeven
665f94423a watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklist
System restart triggered by watchdog time-out works fine on a Koelsch
board with R-Car M2-W ES2.0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21 21:24:41 +02:00
Wolfram Sang
20745634c5 watchdog: simplify getting .drvdata
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21 21:24:40 +02:00