Commit Graph

28 Commits

Author SHA1 Message Date
Chris Packham
8874ecae29 tipc: initialise addr_trail_end when setting node addresses
We set the field 'addr_trial_end' to 'jiffies', instead of the current
value 0, at the moment the node address is initialized. This guarantees
we don't inadvertently enter an address trial period when the node
address is explicitly set by the user.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11 21:40:04 -07:00
Jon Maloy
25b0b9c4e8 tipc: handle collisions of 32-bit node address hash values
When a 32-bit node address is generated from a 128-bit identifier,
there is a risk of collisions which must be discovered and handled.

We do this as follows:
- We don't apply the generated address immediately to the node, but do
  instead initiate a 1 sec trial period to allow other cluster members
  to discover and handle such collisions.

- During the trial period the node periodically sends out a new type
  of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast,
  to all the other nodes in the cluster.

- When a node is receiving such a message, it must check that the
  presented 32-bit identifier either is unused, or was used by the very
  same peer in a previous session. In both cases it accepts the request
  by not responding to it.

- If it finds that the same node has been up before using a different
  address, it responds with a DSC_TRIAL_FAIL_MSG containing that
  address.

- If it finds that the address has already been taken by some other
  node, it generates a new, unused address and returns it to the
  requester.

- During the trial period the requesting node must always be prepared
  to accept a failure message, i.e., a message where a peer suggests a
  different (or equal)  address to the one tried. In those cases it
  must apply the suggested value as trial address and restart the trial
  period.

This algorithm ensures that in the vast majority of cases a node will
have the same address before and after a reboot. If a legacy user
configures the address explicitly, there will be no trial period and
messages, so this protocol addition is completely backwards compatible.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 13:12:18 -04:00
Jon Maloy
d50ccc2d39 tipc: add 128-bit node identifier
We add a 128-bit node identity, as an alternative to the currently used
32-bit node address.

For the sake of compatibility and to minimize message header changes
we retain the existing 32-bit address field. When not set explicitly by
the user, this field will be filled with a hash value generated from the
much longer node identity, and be used as a shorthand value for the
latter.

We permit either the address or the identity to be set by configuration,
but not both, so when the address value is set by a legacy user the
corresponding 128-bit node identity is generated based on the that value.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 13:12:18 -04:00
Jon Maloy
23fd3eace0 tipc: remove direct accesses to own_addr field in struct tipc_net
As a preparation to changing the addressing structure of TIPC we replace
all direct accesses to the tipc_net::own_addr field with the function
dedicated for this, tipc_own_addr().

There are no changes to program logics in this commit.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 13:12:18 -04:00
Jon Maloy
b89afb116c tipc: allow closest-first lookup algorithm when legacy address is configured
The removal of an internal structure of the node address has an unwanted
side effect.
- Currently, if a user is sending an anycast message with destination
  domain 0, the tipc_namebl_translate() function will use the 'closest-
  first' algorithm to first look for a node local destination, and only
  when no such is found, will it resort to the cluster global 'round-
  robin' lookup algorithm.
- Current users can get around this, and enforce unconditional use of
  global round-robin by indicating a destination as Z.0.0 or Z.C.0.
- This option disappears when we make the node address flat, since the
  lookup algorithm has no way of recognizing this case. So, as long as
  there are node local destinations, the algorithm will always select
  one of those, and there is nothing the sender can do to change this.

We solve this by eliminating the 'closest-first' option, which was never
a good idea anyway, for non-legacy users, but only for those. To
distinguish between legacy users and non-legacy users we introduce a new
flag 'legacy_addr_format' in struct tipc_core, to be set when the user
configures a legacy-style Z.C.N node address. Hence, when a legacy user
indicates a zero lookup domain 'closest-first' is selected, and in all
other cases we use 'round-robin'.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 13:12:18 -04:00
Jon Maloy
2026364149 tipc: remove restrictions on node address values
Nominally, TIPC organizes network nodes into a three-level network
hierarchy consisting of the levels 'zone', 'cluster' and 'node'. This
hierarchy is reflected in the node address format, - it is sub-divided
into an 8-bit zone id, and 12 bit cluster id, and a 12-bit node id.

However, the 'zone' and 'cluster' levels have in reality never been
fully implemented,and never will be. The result of this has been
that the first 20 bits the node identity structure have been wasted,
and the usable node identity range within a cluster has been limited
to 12 bits. This is starting to become a problem.

In the following commits, we will need to be able to connect between
nodes which are using the whole 32-bit value space of the node address.
We therefore remove the restrictions on which values can be assigned
to node identity, -it is from now on only a 32-bit integer with no
assumed internal structure.

Isolation between clusters is now achieved only by setting different
values for the 'network id' field used during neighbor discovery, in
practice leading to the latter becoming the new cluster identity.

The rules for accepting discovery requests/responses from neighboring
nodes now become:

- If the user is using legacy address format on both peers, reception
  of discovery messages is subject to the legacy lookup domain check
  in addition to the cluster id check.

- Otherwise, the discovery request/response is always accepted, provided
  both peers have the same network id.

This secures backwards compatibility for users who have been using zone
or cluster identities as cluster separators, instead of the intended
'network id'.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23 13:12:18 -04:00
Jon Maloy
928df1880e tipc: obsolete TIPC_ZONE_SCOPE
Publications for TIPC_CLUSTER_SCOPE and TIPC_ZONE_SCOPE are in all
aspects handled the same way, both on the publishing node and on the
receiving nodes.

Despite previous ambitions to the contrary, this is never going to change,
so we take the conseqeunce of this and obsolete TIPC_ZONE_SCOPE and related
macros/functions. Whenever a user is doing a bind() or a sendmsg() attempt
using ZONE_SCOPE we translate this internally to CLUSTER_SCOPE, while we
remain compatible with users and remote nodes still using ZONE_SCOPE.

Furthermore, the non-formalized scope value 0 has always been permitted
for use during lookup, with the same meaning as ZONE_SCOPE/CLUSTER_SCOPE.
We now permit it even as binding scope, but for compatibility reasons we
choose to not change the value of TIPC_CLUSTER_SCOPE.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17 17:11:46 -04:00
Jon Paul Maloy
a6bf70f792 tipc: simplify include dependencies
When we try to add new inline functions in the code, we sometimes
run into circular include dependencies.

The main problem is that the file core.h, which really should be at
the root of the dependency chain, instead is a leaf. I.e., core.h
includes a number of header files that themselves should be allowed
to include core.h. In reality this is unnecessary, because core.h does
not need to know the full signature of any of the structs it refers to,
only their type declaration.

In this commit, we remove all dependencies from core.h towards any
other tipc header file.

As a consequence of this change, we can now move the function
tipc_own_addr(net) from addr.c to addr.h, and make it inline.

There are no functional changes in this commit.

Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 12:24:45 -04:00
Jon Paul Maloy
d482994fca tipc: fix two bugs in secondary destination lookup
A message sent to a node after a successful name table lookup may still
find that the destination socket has disappeared, because distribution
of name table updates is non-atomic. If so, the message will be rejected
back to the sender with error code TIPC_ERR_NO_PORT. If the source
socket of the message has disappeared in the meantime, the message
should be dropped.

However, in the currrent code, the message will instead be subject to an
unwanted tertiary lookup, because the function tipc_msg_lookup_dest()
doesn't check if there is an error code present in the message before
performing the lookup. In the worst case, the message may now find the
old destination again, and be redirected once more, instead of being
dropped directly as it should be.

A second bug in this function is that the "prev_node" field in the message
is not updated after successful lookup, something that may have
unpredictable consequences.

The problems arising from those bugs occur very infrequently.

The third change in this function; the test on msg_reroute_msg_cnt() is
purely cosmetic, reflecting that the returned value never can be negative.

This commit corrects the two bugs described above.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 13:47:36 -07:00
Ying Xue
3474753954 tipc: make tipc node address support net namespace
If net namespace is supported in tipc, each namespace will be treated
as a separate tipc node. Therefore, every namespace must own its
private tipc node address. This means the "tipc_own_addr" global
variable of node address must be moved to tipc_net structure to
satisfy the requirement. It's turned out that users also can assign
node address for every namespace.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Tero Aho <Tero.Aho@coriant.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 16:24:33 -05:00
Ying Xue
1da465683a tipc: make tipc broadcast link support net namespace
TIPC broadcast link is statically established and its relevant states
are maintained with the global variables: "bcbearer", "bclink" and
"bcl". Allowing different namespace to own different broadcast link
instances, these variables must be moved to tipc_net structure and
broadcast link instances would be allocated and initialized when
namespace is created.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Tested-by: Tero Aho <Tero.Aho@coriant.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 16:24:33 -05:00
Paul Gortmaker
617d3c7a50 tipc: compress out gratuitous extra carriage returns
Some of the comment blocks are floating in limbo between two
functions, or between blocks of code.  Delete the extra line
feeds between any comment and its associated following block
of code, to be consistent with the majority of the rest of
the kernel.  Also delete trailing newlines at EOF and fix
a couple trivial typos in existing comments.

This is a 100% cosmetic change with no runtime impact.  We get
rid of over 500 lines of non-code, and being blank line deletes,
they won't even show up as noise in git blame.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-30 15:53:56 -04:00
Allan Stephens
f831c963b5 tipc: Eliminate configuration for maximum number of cluster nodes
Gets rid of the need for users to specify the maximum number of
cluster nodes supported by TIPC. TIPC now automatically provides
support for all 4K nodes allowed by its addressing scheme.

Note: This change sets TIPC's memory usage to the amount used by
a maximum size node table with 4K entries.  An upcoming patch that
converts the node table from a linear array to a hash table will
compact the node table to a more efficient design, but for clarity
it is nice to have all the Kconfig infrastruture go away separately.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
a3796f895f tipc: Add network address mask helper routines
Introduces a pair of helper routines that convert the network address
for a TIPC node into the network address for its cluster or zone.

This is a cosmetic change designed to avoid future errors caused by
the incorrect use of address bitmasks, and does not alter the existing
operation of TIPC.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:16 -04:00
Allan Stephens
886ef52a8c tipc: remove redundant #includes
Eliminates a number of #include statements that no longer serve any
useful purpose.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:54 -08:00
Allan Stephens
8f92df6ad4 tipc: Remove prototype code for supporting multiple clusters
Eliminates routines, data structures, and files that were intended
to allow TIPC to support a network containing multiple clusters.
Currently, TIPC supports only networks consisting of a single cluster
within a single zone, so this code is unnecessary.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:49 -08:00
Allan Stephens
08c80e9a03 tipc: Remove prototype code for supporting slave nodes
Simplifies routines and data structures that were intended to allow
TIPC to support slave nodes (i.e. nodes that did not have links to
all of the other nodes in its cluster, forcing TIPC to route messages
that it could not deliver directly through a non-slave node).

Currently, TIPC supports only networks containing non-slave nodes,
so this code is unnecessary.

Note: The latest edition of the TIPC 2.0 Specification has eliminated
the concept of slave nodes entirely.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:48 -08:00
Allan Stephens
51f98a8d70 tipc: Remove prototype code for supporting multiple zones
Eliminates routines, data structures, and files that were intended
to allows TIPC to support a network containing multiple zones.
Currently, TIPC supports only networks consisting of a single cluster
within a single zone, so this code is unnecessary.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:47 -08:00
Allan Stephens
c802628297 tipc: Remove obsolete inclusions of header files
Gets rid of #include statements that are no longer required as a
result of the merging of obsolete native API header file content
into other TIPC include files.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02 13:34:02 -08:00
stephen hemminger
31e3c3f6f1 tipc: cleanup function namespace
Do some cleanups of TIPC based on make namespacecheck
  1. Don't export unused symbols
  2. Eliminate dead code
  3. Make functions and variables local
  4. Rename buf_acquire to tipc_buf_acquire since it is used in several files

Compile tested only.
This make break out of tree kernel modules that depend on TIPC routines.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16 11:13:24 -07:00
Eric Dumazet
a02cec2155 net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:39 -07:00
Allan Stephens
80e0c33064 tipc: Reduce footprint by un-inlining address routines
Convert address-related inline routines that are more than one
line into standard functions, thereby eliminating a significant
amount of repeated code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12 23:02:26 -07:00
YOSHIFUJI Hideaki
c430728526 [NET] TIPC: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:15 -08:00
Per Liden
4323add677 [TIPC] Avoid polluting the global namespace
This patch adds a tipc_ prefix to all externally visible symbols.

Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18 00:45:16 +01:00
Per Liden
593a5f22d8 [TIPC] More updates of file headers
Updated copyright notice to include the year the file was
actually created. Information about file creation dates
was extracted from the files in the old CVS repository
at tipc.sourceforge.net.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:39 -08:00
Per Liden
9da1c8b694 [TIPC] Update of file headers
The copyright statements from different parts of Ericsson
have been merged into one.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:38 -08:00
Per Liden
9ea1fd3c1a [TIPC] License header update
The license header in each file now more clearly state that this
code is licensed under a dual BSD/GPL. Before this was only
evident if you looked at the MODULE_LICENSE line in core.c.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:36 -08:00
Per Liden
b97bf3fd8f [TIPC] Initial merge
TIPC (Transparent Inter Process Communication) is a protocol designed for
intra cluster communication. For more information see
http://tipc.sourceforge.net

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:31 -08:00