Commit Graph

245 Commits

Author SHA1 Message Date
Chanwoo Choi
a75fed2ee6 extcon: sm5502: Change internal hardware switch according to cable type
This patch changes internal hardware DP_CON/DM_CON switch according to
cable type. The SM5502 MUIC device can set hardware switch as following:
- OPEN (not connected state) / USB / UART / AUDIO
Also, this patch set VBUSIN switch according to cable type.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:22:35 +09:00
Chanwoo Choi
e1954452f5 extcon: sm5502: Detect cable state after completing platform booting
This patch detect whether cable is connected or not and the cable type
after completing kernel/platform booting using system_power_efficient_wq.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:22:35 +09:00
Chanwoo Choi
914b881f94 extcon: sm5502: Add support new SM5502 extcon device driver
This patch add new SM5502 MUIC(Micro-USB Interface Controller) device by using
EXTCON subsystem. The extcon-sm5502 driver is capable of identifying the type
of the external power source and attached accessory. An external power sources,
such as Deticated Charger or a standard USB port, are able to charge the battery
in the smart phone via the connector.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:22:30 +09:00
Charles Keepax
17271f608b extcon: arizona: Get MICVDD against extcon device
Previously we would do a regulator get against the main Arizona device
to obtain the MICVDD regulator. Arizona is an MFD device and normally
MICVDD will be supplied by one of its children (the arizona-micsupp
regulator). As devres destruction for the MFD device will run after all
its children have been destroyed, the regulator will be destroyed before
devres calls regulator_put. This causes a warning from both the
destruction of the child node, as the regulator is still open, and from
the put of the regulator as the regulator device has already been
destroyed.

A simple fix here is to get the regulator against the extcon device
itself such that devres runs when the child is destroyed. This has the
additional benefit that if for some reason the extcon driver is unloaded
the regulator reference won't hang around until the MFD is unloaded.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:07:42 +09:00
Jingoo Han
0a16ee633a extcon: Remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message. The following
checkpatch warning is also removed.

  WARNING: Possible unnecessary 'out of memory' message

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
[Acked by Charles Keepax for arizona part]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-07-23 10:07:09 +09:00
Chanwoo Choi
6b18aa1806 Immutable branch between MFD, Extcon and Regulator due for v3.17
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJToFLNAAoJEFGvii+H/HdhAy0QAIHM4bHpC8xbP52RH/Nubi2N
 vNSQ6ky1WNz0mCIzgFb0xfQhjeMZ72nRAWzbkSiZGaqqDTD+qU00NJCRC+e3a/bd
 nXaaDAAVne9LmQiqz4z5BRjg2png5FeJ72+y8FlFXi/f8H/cbrGg1Wl10f2fH0Fx
 DtKAsIkoUvsNGKyFy9aEZdeEYOLRhaIWMWODZaIPokqhQJs1u12Jn2apuyAyIwQt
 V2wrAbf8dPd7BywcN1RSORsrY86pkwyOKDEPK3bpmo1C4jryfWyqU+t8aaCkGQ7v
 t/JJQmGfcVIl9kuxKBZ9bO5yIkcdUlhi3NEc37GO6S1fDGVoYUOuPGr2WhHNmzip
 A08U5mSVUQNPHtJRUPMB4+cCTVaFQvgWmHR5Sjd6YE9vqhKSrhZW9BHzhV6hbNSb
 i+V+4hINYuJLR64bo9Z661Urf97RWfbC1AKxNBVKIC9F9y3edDXviBlBtHc8rEUq
 U2yOCjmRaySMRbWSYClkGkk7Ps1dV3rM6ukQ+7vheHEPcwLsDunnRk2bHxwKHMkm
 FbTZXhIO0QzjKmcicWpuMknEq+64Bor3WTUrs8SKYDuzd8mi1u1k3TRhhu/HOtFz
 pzdgRwdmOGDzb/tekVe1NMYpB4mQcLmPnQeuWCal2DCoyF1Enm4A3eCimQKjU9ue
 ZPiqXQ2FR2oS0/to7+Zm
 =+XpG
 -----END PGP SIGNATURE-----

Merge tag 'mfd-extcon-regulator-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into extcon-next

Immutable branch between MFD, Extcon and Regulator due for v3.17
2014-07-23 10:05:34 +09:00
Robert Baldyga
342d669c1e mfd: max77693: Handle IRQs using regmap
This patch modifies mfd driver to use regmap for handling interrupts.
It allows to simplify irq handling process. This modifications needed
to make small changes in function drivers, which use interrupts.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17 15:17:00 +01:00
Robert Baldyga
d0540f91cf mfd: max77693: Remove unnecessary wrapper functions
This patch removes wrapper functions used to access regmap, and
make driver using regmap_*() functions instead.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17 15:16:10 +01:00
Chanwoo Choi
ac65a625a0 extcon: Set parent device of extcon device using prameter of devm_extcon_dev_allocate
This patch set the parent device of extcon device using first parameter of
devm_extco_dev_allocate() to remove duplicate code on all of extcon provider
drivers.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reported-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2014-06-16 13:33:19 +09:00
Charles Keepax
24a279b1ca extcon: arizona: Update manual headphone detection calculation
The higher levels of impedance have a higher minimum value than the
first level. As the same value was used for all levels, higher impedances
were reported with a very low level of accuracy. This patch applies the
approriate lower threshold for each level, whilst we are changing things
add a define for the maximum value at each level to improve readability.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:19 +09:00
Charles Keepax
e368f52521 extcon: arizona: Correct typo to disable regulation for button detection
We can use the bypass mode on the MICVDD reg for button detection, as
the comment in the code states, however the code was mistakenly
disabling bypass. This patch corrects this and allows bypass mode during
button detection.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:19 +09:00
Nikesh Oswal
34602486d0 extcon: arizona: Use extcon cable API with index of extcon cable instead of string
Use extcon cable API instead of state API as it is much more
idiomatic.

Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
[Modify patch title by Chanwoo Choi]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:19 +09:00
Charles Keepax
5a8844b596 extcon: arizona: Remove duplicate set of input parent device
devm_input_allocate_device already sets the parent device to be that
passed to it, we also set this manually in arizona_extcon_probe. This
patch removes the redundant set from arizona_extcon_probe.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:19 +09:00
Chanwoo Choi
e48f9dac3f extcon: Reorder the sequence of extcon device driver alphabetically
This patch reorder the sequence of extcon device diver alphabetically
to imporbe readability.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:18 +09:00
Krzysztof Kozlowski
3bc2ac7def extcon: palmas: Make of_device_id array const
Array of struct of_device_id may be be const as expected by
of_match_table field.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:18 +09:00
Richard Fitzgerald
a288d64871 extcon: arizona: support inverted jack detect switch
Add config option for inverted jack detect switch that
opens when jack is inserted.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
[Acked by Lee Jones for MFD part]
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16 13:33:18 +09:00
Chanwoo Choi
3f79a3fb5f extcon: palmas: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Cc: Graeme Gregory <gg@slimlogic.co.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:52:12 +09:00
Chanwoo Choi
60cd62d4f7 extcon: gpio: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:51:48 +09:00
Chanwoo Choi
1876fd9af5 extcon: adc-jack: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:51:22 +09:00
Chanwoo Choi
ef70a214b5 extcon: arizona: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: patches@opensource.wolfsonmicro.com
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:50:55 +09:00
Chanwoo Choi
0604002cde extcon: max14577: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:50:31 +09:00
Chanwoo Choi
577bef1104 extcon: max77693: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:50:07 +09:00
Chanwoo Choi
22f9afb95b extcon: max8997: Use devm_extcon_dev_allocate for extcon_dev
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:46:28 +09:00
Chanwoo Choi
739ba1bfdb extcon: Add devm_extcon_dev_allocate/free to manage the resource of extcon device
This patch add device managed devm_extcon_dev_{allocate,free} to automatically
free the memory of extcon_dev structure without handling free operation.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:45:56 +09:00
Chanwoo Choi
a9af65223b extcon: Add extcon_dev_allocate/free() to control the memory of extcon device
This patch add APIs to control the extcon device on extcon provider driver.
The extcon_dev_allocate() allocates the memory of extcon device and initializes
supported cables. And then extcon_dev_free() decrement the reference of the
device of extcon device and free the memory of the extcon device. This APIs
must need to implement devm_extcon_dev_allocate()/free() APIs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-29 09:35:15 +09:00
Sangjung Woo
d88cc36704 extcon: arizona: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:06 +09:00
Sangjung Woo
b4dad55abd extcon: palmas: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:05 +09:00
Sangjung Woo
2923803d4f extcon: max8997: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:05 +09:00
Sangjung Woo
10fae1184d extcon: max77693: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:04 +09:00
Sangjung Woo
14dbd54962 extcon: max14577: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:04 +09:00
Sangjung Woo
d92c2f12f8 extcon: gpio: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:03 +09:00
Sangjung Woo
4b5dd73883 extcon: adc-jack: Use devm_extcon_dev_register()
Use the resource-managed extcon device register function (i.e.
devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device
is attached with this function, that extcon device is automatically unregistered
on driver detach. That reduces tiresome managing code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:37:03 +09:00
Sangjung Woo
1111244ff4 extcon: Add resource-managed extcon register function
Add resource-managed extcon device register function for convenience.
For example, if a extcon device is attached with new
devm_extcon_dev_register(), that extcon device is automatically
unregistered on driver detach.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
[Fix bug about devm_extcon_dev_match/release() and code clean by Chanwoo Choi]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 19:36:55 +09:00
Krzysztof Kozlowski
369afd4ba2 extcon: max14577: Properly handle regmap_irq_get_virq error
The regmap_irq_get_virq may return 0 or -EINVAL on error. Fail the probe
in both situations.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:26:31 +09:00
Krzysztof Kozlowski
12adef5b49 extcon: max14577: Fix probe failure on successful work queue
In probe the driver queued delayed work for cable detection and
returned the result of queue_delayed_work() call. However the return
value of queue_delayed_work() does not indicate an error and in normal
condition it returns true which means successful work queue.
This effectively resulted in probe failure:
[    2.088204] max14577-muic: probe of max77836-muic failed with error 1

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 962e56bfcf ("extcon: max14577: Add extcon-max14577 driver...")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:26:30 +09:00
Chanwoo Choi
a55d952a2b Immutable branch between MFD and Extcon due for v3.16 merge-window.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTV7vmAAoJEFGvii+H/HdhStcQAIPXONkcTtnRijYYVo4+zMfY
 5lyEc7bpboK3FJW0SrSM3gt6jSjFayz7HN+oVd5ez73XYlKr+X4oap6GD1VnP+r2
 d2kc0ccfRa5oMPdeth0xabwmXnG2Cm3i3EwLGZAjxRAI72nmmTJu08HSWYSw9tBs
 oxKLuuYNhdIRAoEHrA5wyymb4fq2AdQrdNGEXZ9utZEK7z0+DRxD3LxeNEiW8dU2
 pU9XXlEbp9gQKsyiRL+MPxuFH7C7QpaQN1aryKupHEHtuRPjxqIsXETUsmxGt+sQ
 P3jN3FayYRYknqWSda+/lgEjkzw0CgeLFpR13emt5P2K8K8NPcV17mHhggWxFaes
 iGPi9cgotV9X2zxAgayAusunPRHEQ8Yz7bnQsXBuH04CbBgnu53gBUQyELQhJ2xO
 HBG6VVn5kXCpb80OWX/lTefEIN3yfuH15eV/cmBk3Qu6qqVFjCg6cBqi2b5QFPYN
 8ks/58ewbhKqh+T+yr7N70sXIfOF9aBIqREdnlp/uXaCYLkylSNaUPpxZTllDUnE
 QoJVTMwb/BgGKolhpfwva2UkVPt5C50w1+mNLh05d9IMF/C9kyQMcsC7rOa229LU
 XwtDoWFUTMzjNqTRBTLdElfkEnEET07xDvv3SQTAj30eTCaQs0+gxDMNSrDN/0zN
 u6uUTp1grfVVOoz1FPcS
 =q4Ul
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-extcon-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into HEAD

Immutable branch between MFD and Extcon due for v3.16 merge-window.
2014-04-24 17:21:58 +09:00
Krzysztof Kozlowski
bf9509e032 extcon: max8997: Use power efficient workqueue for delayed cable detection
Schedule delayed cable detection work on power efficient workqueue
so the scheduler won't wake up idle core for that work.
This extends the idle time for CPU cores and conserves power.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:20:39 +09:00
Krzysztof Kozlowski
b8629411bf extcon: max77693: Use power efficient workqueue for delayed cable detection
Schedule delayed cable detection work on power efficient workqueue
so the scheduler won't wake up idle core for that work.
This extends the idle time for CPU cores and conserves power.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:20:38 +09:00
Krzysztof Kozlowski
dfee4111fe extcon: max8997: Fix NULL pointer exception on missing pdata
Fix NULL pointer exception when platform data is not supplied. The
driver dereferenced pdata pointer where it could be NULL.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 810d601f07
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:20:37 +09:00
Krzysztof Kozlowski
d5653f2b73 extcon: max77693: Fix two NULL pointer exceptions on missing pdata
Fix NULL pointer exceptions when platform data is not supplied.

Trace of one exception:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.14.0-12045-gead5dd4687a6-dirty #1628
task: eea80000 ti: eea88000 task.ti: eea88000
PC is at max77693_muic_probe+0x27c/0x528
LR is at regmap_write+0x50/0x60
pc : [<c041d1c8>]    lr : [<c02eba60>]    psr: 20000113
sp : eea89e38  ip : 00000000  fp : c098a834
r10: ee1a5a10  r9 : 00000005  r8 : c098a83c
r7 : 0000000a  r6 : c098a774  r5 : 00000005  r4 : eeb006d0
r3 : c0697bd8  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 4000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xeea88240)
Stack: (0xeea89e38 to 0xeea8a000)
9e20:                                                       c08499fc eeb006d0
9e40: 00000000 00000000 c0915f98 00000001 00000000 ee1a5a10 c098a730 c09a88b8
9e60: 00000000 c098a730 c0915f98 00000000 00000000 c02d6aa0 c02d6a88 ee1a5a10
9e80: c0a712c8 c02d54e4 00001204 c0628b00 ee1a5a10 c098a730 ee1a5a44 00000000
9ea0: eea88000 c02d57b4 00000000 c098a730 c02d5728 c02d3a24 ee813e5c eeb9d534
9ec0: c098a730 ee22f700 c097c720 c02d4b14 c08174ec c098a730 00000006 c098a730
9ee0: 00000006 c092fd30 c09b8500 c02d5df8 00000000 c093cbb8 00000006 c0008928
9f00: 000000c3 ef7fc785 00000000 ef7fc794 00000000 c08af968 00000072 eea89f30
9f20: ef7fc85e c065f198 000000c3 c003e87c 00000003 00000000 c092fd3c 00000000
9f40: c08af618 c0826d58 00000006 00000006 c0956f58 c093cbb8 00000006 c092fd30
9f60: c09b8500 000000c3 c092fd3c c08e8510 00000000 c08e8bb0 00000006 00000006
9f80: c08e8510 c0c0c0c0 00000000 c0628fac 00000000 00000000 00000000 00000000
9fa0: 00000000 c0628fb4 00000000 c000f038 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c041d1c8>] (max77693_muic_probe) from [<c02d6aa0>] (platform_drv_probe+0x18/0x48)
[<c02d6aa0>] (platform_drv_probe) from [<c02d54e4>] (driver_probe_device+0x140/0x384)
[<c02d54e4>] (driver_probe_device) from [<c02d57b4>] (__driver_attach+0x8c/0x90)
[<c02d57b4>] (__driver_attach) from [<c02d3a24>] (bus_for_each_dev+0x54/0x88)
[<c02d3a24>] (bus_for_each_dev) from [<c02d4b14>] (bus_add_driver+0xe8/0x204)
[<c02d4b14>] (bus_add_driver) from [<c02d5df8>] (driver_register+0x78/0xf4)
[<c02d5df8>] (driver_register) from [<c0008928>] (do_one_initcall+0xc4/0x174)
[<c0008928>] (do_one_initcall) from [<c08e8bb0>] (kernel_init_freeable+0xfc/0x1c8)
[<c08e8bb0>] (kernel_init_freeable) from [<c0628fb4>] (kernel_init+0x8/0xec)
[<c0628fb4>] (kernel_init) from [<c000f038>] (ret_from_fork+0x14/0x3c)
Code: caffffe7 e59d200c e3550001 b3a05001 (e5923008)
---[ end trace 85db969ce011bde7 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 190d7cfc86
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24 17:20:37 +09:00
Krzysztof Kozlowski
4706a5253b extcon: max14577: Add support for MAX77836
Add support for MAX77836 chipset to the max14577 extcon driver. The
MAX77836 MUIC has additional interrupts (VIDRM, ADC1K) so IRQ handling
is split up into two functions: max14577_parse_irq() and
max77836_parse_irq().

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:09:25 +01:00
Krzysztof Kozlowski
0ca852b794 extcon: max14577: Choose muic_irqs according to device type
This patch continues the preparation for adding support for max77836
device to existing max14577 driver.

During probe choose muic_irqs according to device type. Currently there
are only "max14577_muic_irqs" but later patch will add max77836
interrupts.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:08:34 +01:00
Krzysztof Kozlowski
2b1d18f181 extcon: max14577: Add max14577 prefix to muic_irqs
Add max14577 prefix to muic_irqs array. This prepares for max77836
support in this extcon driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:08:18 +01:00
Chanwoo Choi
4005da5ce8 extcon: max14577: Change extcon name instead of static name according to device type
This patch use device name to make sysfs path according to device type:

max14577-muic
- /sys/class/extcon/max14577-muic/
max77836-muic
- /sys/class/extcon/max77836-muic/

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:07:16 +01:00
Kishon Vijay Abraham I
f63d32d408 extcon: palmas: explicitly set edev name as node name
commit ca488 (extcon: of: Remove unnecessary function call by using the
name of device_node) started using node name instead of device name
to get the extcon device. This breaks dwc3-omap since it's not able to
get the extcon device anymore. Fixed it by setting edev name of
palmas to be the same as its node name.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reported-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-22 15:41:10 +09:00
Chanwoo Choi
1ad94ffef2 extcon: Move OF helper function to extcon core and change function name
This patch move simply OF helper function to extcon core and change function
name as following:
- of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-19 14:41:58 +09:00
Chanwoo Choi
ca48824117 extcon: of: Remove unnecessary function call by using the name of device_node
This patch remove unnecessary function call in of_extcon_get_extcon_dev()
by using the name of device_node structure.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-03-19 13:45:43 +09:00
Jingoo Han
3cc731d97f extcon: gpio: Use SIMPLE_DEV_PM_OPS macro
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-03-19 13:45:42 +09:00
Jingoo Han
8d4288fb99 extcon: palmas: Use SIMPLE_DEV_PM_OPS macro
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-03-19 13:45:41 +09:00
Charles Keepax
1139110064 ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
The snd_soc_dapm_xxxx_pin all require the dapm_mutex to be held when
they are called as they edit the dirty list, however very few of the
callers do so.

This patch adds unlocked versions of all the functions replacing the
existing implementations with one that holds the lock internally. We
also fix up the places where the lock was actually held on the caller
side.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2014-02-20 18:40:07 +09:00