Commit Graph

240 Commits

Author SHA1 Message Date
Mathieu Desnoyers
7d2284b09f Fix Blackfin HARDWARE_PM support
This patch restores the blackfin Hardware Performance Monitor Profiling
support that was killed by the combining of instrumentation menus in
commit 09cadedbdc.

Since there seems to be no good reason to behave differently from other
architectures, it now automatically selects the hardware performance
counters whenever the profiling is activated.

mach-common/irqpanic.c: pm_overflow calls pm_overflow_handler which is
in oprofile/op_model_bf533.c.  I doubt that setting HARDWARE_PM as "m"
will work at all, since the pm_overflow_handler should be in the core
kernel image because it is called by irqpanic.c.

Therefore, I change HARDWARE_PM from a tristate to a bool.

The whole arch/$(ARCH)/oprofile/ is built depending on CONFIG_OPROFILE. Since
part of the HARDWARE_PM support files sits in this directory, it makes sense to
also depend on OPROFILE, not only PROFILING. Since OPROFILE already depends on
PROFILING, it is correct to only depend on OPROFILE only.

Thanks to Adrian Bunk for finding this bug and providing an initial
patch.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Adrian Bunk <adrian.bunk@movial.fi>
CC: Randy Dunlap <randy.dunlap@oracle.com>
CC: bryan.wu@analog.com
Acked-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-15 12:32:30 -08:00
Sonic Zhang
233b28a91c Blackfin arch: fix bug when enable uart1 with uart0 disabled => no initial console
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 17:04:41 +08:00
Mike Frysinger
49dce9124b Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from process.c, which was largely duplicated
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:46:49 +08:00
Mike Frysinger
9cb07b23db Blackfin arch: use common __INIT/__FINIT defines rather than setting the .section ourselves to .init.text
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:45:08 +08:00
Robin Getz
fb322915a0 Blackfin arch: fix bug when sending signals with the wrong PC, cause gdb get confused
We need to send signals with the proper PC, or gdb gets
confused, and lots of tests fail. This should fix that.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:38:05 +08:00
Robin Getz
569a50ca3f Blackfin arch: Ensure we printk out strings with the proper loglevel
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:35:57 +08:00
Bernd Schmidt
0bad33d93a Blackfin arch: Need to specify ax with the .init.text section,
Need to specify "ax" with the .init.text section, otherwise the linker will
make unique .init.text.1 .. .init.text.3 sections to cope with the flags
2007-11-21 16:33:47 +08:00
Robin Getz
f72eecb97b Blackfin arch: Update Kconfig to latest Blackfin silicon datasheets
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:29:20 +08:00
Mike Frysinger
eee1f15ce6 Blackfin arch: update defconfig files
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:23:51 +08:00
Mike Frysinger
46c87c3cce Blackfin arch: Fix typo, and add ENDPROC - no functional changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:15:48 +08:00
Mike Frysinger
c3a9f435ae Blackfin arch: cplb and map header file cleanup
- remove duplicated defines for the BF561
 - generalize L2 support (so that it works for BF54x) and mark it executable
 - add support for reading/executing the Boot ROM sections
   (since it has data/functions we may need at runtime)
 - and fixup names for each map

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:12:12 +08:00
Mike Frysinger
81a487a59f Blackfin arch: cleanup the cplb declares
- no need to declare their sizes in the common header
 - no need to tack on the section attribute as only the definition matters, not references

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:55:45 +08:00
Mike Frysinger
7160e9503a Blackfin arch: fix building for BF542 processors which only have 1 TWI
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:03:07 +08:00
Mike Frysinger
8d6c242062 Blackfin arch: rename _return_from_exception to _bfin_return_from_exception and export it
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:53:49 +08:00
Mike Frysinger
d0025e5edf Blackfin arch: move EXPORT_SYMBOL() to C files where the symbol is actually defined
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:34:51 +08:00
Sonic Zhang
e40540b304 Blackfin arch: fix bug NOR Flash MTD mount fail
Config EBIU flash mode properly. EBIU_MODE EBIU_FCTL
EBIU_MBSCTL register should be configurd to Flash
mode.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 23:49:52 +08:00
Cliff Cai
28a44d4bd6 Blackfin arch: export symbol get_dma_curr_desc_ptr for driver usage
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:22:58 +08:00
Robin Getz
90c7f4686f Blackfin arch: cleanup kernel exception message, don't insult the customer.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:35:33 +08:00
Bernd Schmidt
af8a5af3ff Blackfin arch: fix bug kernel not to boot up with mtd filesystems
Revert this patch:
move the init sections to the end of memory, so that after they
are free, run time memory is all continugous - this should help decrease
memory fragementation. When doing this, we also pack some of the other
sections a little closer together, to make sure we don't waste memory.
To make this happen, we need to rename the .data.init_task section to
.init_task.data, so it doesn't get picked up by the linker script glob.

Since it causes the kernel not to boot up with mtd filesystems.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:09:49 +08:00
Michael Hennerich
561cc18b86 Blackfin arch: add AXIS AX88180 Gigabit Ethernet Hardware and Driver to board files
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:56:08 +08:00
Robin Getz
4c26c6c9bf Blackfin arch: print out modules that are loaded if we get a kernel oops
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:20:49 +08:00
Michael Hennerich
5c91fb902d Blackfin arch: Add assembly function insl_16
/*
 * CPUs often take a performance hit when accessing unaligned memory
 * locations. The actual performance hit varies, it can be small if the
 * hardware handles it or large if we have to take an exception and fix
 * it
 * in software.
 *
 * Since an ethernet header is 14 bytes network drivers often end up
 * with
 * the IP header at an unaligned offset. The IP header can be aligned by
 * shifting the start of the packet by 2 bytes. Drivers should do this
 * with:
 *
 * skb_reserve(NET_IP_ALIGN);
 *
 * The downside to this alignment of the IP header is that the DMA is
 * now
 * unaligned. On some architectures the cost of an unaligned DMA is high
 * and this cost outweighs the gains made by aligning the IP header.
 *
 * Since this trade off varies between architectures, we allow
 * NET_IP_ALIGN
 * to be overridden.
 */

This new function insl_16 allows to read form 32-bit IO and writes to
16-bit aligned memory. This is useful in above described scenario -
In particular with the AXIS AX88180 Gigabit Ethernet MAC.
Once the device is in 32-bit mode, reads from the RX FIFO always
decrements 4bytes.
While on the other side the destination address in SDRAM is always
16-bit aligned.
If we use skb_reserve(0) the receive buffer is 32-bit aligned but later
we hit a unaligned exception in the IP code.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:46:58 +08:00
Mike Frysinger
1754a5d9f9 Blackfin arch: use do_div() for the 64bit division as pointed out by Bernd
If you need a 64 bit divide in the kernel, use asm/div64.h.
Revert the addition of udivdi3.

Cc: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23 11:28:11 +08:00
Mike Frysinger
e709d84b99 Blackfin arch: fix spurious newline in header
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:24:07 +08:00
Adrian Bunk
8d2e24c3c1 Blackfin arch: unexport get_wchan
The only user of get_wchan I was able to find is the proc fs - and proc
can't be built modular.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:05:06 +08:00
Adrian Bunk
05c484355f Blackfin arch: remove dump_thread()
The only user is the a.out support.

It was therefore removed prior to the blackfin merge from all
architectures not supporting a.out.

Currently, Blackfin doesn't suppport a.out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:41:56 +08:00
Robert P. J. Day
09db9487b0 Blackfin arch: Typo: "CONFIG_RTC_BFIN_MODULE" -> "CONFIG_RTC_DRV_BFIN_MODULE"
i'm *reasonably* confident that this is a typo that should be fixed.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 22:57:03 +08:00
Michael Hennerich
c7d4896621 Blackfin arch: Dont use cs_change_per_word, since the AD7877 driver doesnt require it anymore; fix bus numbers, fix typos
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:33:31 +08:00
Mike Frysinger
f02bcec598 Blackfin arch: relocate linux/usb_isp1362.h to linux/usb/isp1362.h like in newer linux trees
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:29:15 +08:00
Mike Frysinger
632f658b36 Blackfin arch: the usb_sl811.h header has been moved to usb/sl811.h so lets use that version now
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:25:47 +08:00
Mike Frysinger
70b63ba739 Blackfin arch: do not include linux/autoconf.h
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:22:53 +08:00
Mike Frysinger
9862cc5278 Blackfin arch: change get_bf537_ether_addr() to bfin_get_ether_addr() since this is not BF537 specific and to better match other Blackfin-specific conventions
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:21:20 +08:00
Mike Frysinger
137b1529da Blackfin arch: sharing the board-specific MAC function does not make sense so move it into board-specific files
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-22 16:07:03 +08:00
Mike Frysinger
a055b2b4de Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIO
since we have this always turned on now and dont want it off (and hasnt been an option in a while)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:12:32 +08:00
Mike Frysinger
0feea17f94 Blackfin arch: fix missing newline to file
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:10:42 +08:00
Mike Frysinger
7c7fd17017 Blackfin arch: add BF547 to list of accepted procs
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:10:21 +08:00
Robin Getz
839e01c2bf Blackfin arch: move the init sections to the end of memory to help decrease memory fragementation
move the init sections to the end of memory, so that after they
are free, run time memory is all continugous - this should help decrease
memory fragementation. When doing this, we also pack some of the other
sections a little closer together, to make sure we don't waste memory.
To make this happen, we need to rename the .data.init_task section to
.init_task.data, so it doesn't get picked up by the linker script glob.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 20:57:53 +08:00
Mike Frysinger
74ce8322bf Blackfin arch: split debug stuff off into Kconfig.debug like everyone else
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 23:50:49 +08:00
Mike Frysinger
529a73fbae Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23 14:28:44 +08:00
Mike Frysinger
e4e9a7adeb Blackfin arch: fix indentation -- use tabs, not spaces
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 20:39:34 +08:00
Mike Frysinger
4f25eb85d6 Blackfin arch: split board selection off into mach subdirs
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 20:49:44 +08:00
Mike Frysinger
d07f438031 Blackfin arch: fix silicon rev display and selection for BF52x/BF54x
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 15:49:17 +08:00
Mike Frysinger
53f8a252df Blackfin arch: remove mention of uClinux/no-mmu ... we are just Blackfin Linux
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 15:48:01 +08:00
Javier Herrero
51e7f6830f Blackfin arch: Default config for HV Sistemas H8606 board
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 15:45:33 +08:00
Robin Getz
6a3f0b460c Blackfin arch: fix bug cplbmgr.S does not exit properly on error condition
https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=1685

Ensure that cache/protection is turned back on when we get a
fault, and ensure that the initial population of the CPLB tables are
correct - that kernel is locked in CPLB tables

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 15:10:48 +08:00
Michael Hennerich
0954f70ab1 Blackfin arch: fix AD7877 bus_num and add support for WM8731 SPI control interface
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-13 00:16:19 +08:00
Bryan Wu
5d448dd507 Blackfin arch: move hard coded pin_req to board file
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time

 - move this static things to the blackfin board file
 - add pin_req array to struct bfin5xx_spi_master
 - tested on BF537/BF548 with SPI flash

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12 23:24:42 +08:00
Robin Getz
4a589e1ef6 Blackfin arch: fix bux - only reset the PC when necessary, otherwise gdb gets confused
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12 22:46:46 +08:00
Robin Getz
f26fbc48f1 Blackfin arch: ensure we work around ANOMALY_05000261 for null pointers
We currently do not. Also make it easier to handle cplb violations - in traps.c

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12 22:21:30 +08:00
Mike Frysinger
36208059c1 Blackfin arch: reclaim a few bytes from the end of our init section
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-30 12:00:02 +08:00