Commit Graph

368 Commits

Author SHA1 Message Date
Andrew Morton
c255a45805 memcg: rename config variables
Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
Linus Torvalds
637e49ae4f Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull treewide kbuild cleanup from Michal Marek:
 "Paul Bolle did a cleanup of <asm/*.h> headers in various
  architectures.  Because the patch touch several architectures at
  once, it was easiest for me to apply them to the kbuild tree."

* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Remove useless wrappers of asm-generic/rmap.h
  Remove useless wrappers of asm-generic/ipc.h
  Remove useless wrappers of asm-generic/cpumask.h
2012-07-30 11:24:53 -07:00
Linus Torvalds
84eda28060 Merge branch 'kmap_atomic' of git://github.com/congwang/linux
Pull final kmap_atomic cleanups from Cong Wang:
 "This should be the final round of cleanup, as the definitions of enum
  km_type finally get removed from the whole tree.  The patches have
  been in linux-next for a long time."

* 'kmap_atomic' of git://github.com/congwang/linux:
  pipe: remove KM_USER0 from comments
  vmalloc: remove KM_USER0 from comments
  feature-removal-schedule.txt: remove kmap_atomic(page, km_type)
  tile: remove km_type definitions
  um: remove km_type definitions
  asm-generic: remove km_type definitions
  avr32: remove km_type definitions
  frv: remove km_type definitions
  powerpc: remove km_type definitions
  arm: remove km_type definitions
  highmem: remove the deprecated form of kmap_atomic
  tile: remove usage of enum km_type
  frv: remove the second parameter of kmap_atomic_primary()
  jbd2: remove the second argument of kmap_atomic
2012-07-27 11:26:48 -07:00
Chris Metcalf
7f240b7db0 tilepro pci: fix pci_bus.subordinate bad bombing from b918c62e
The bombing to convert pci_bus.subordinate to busn_res.end accidentally
modified a "struct pci_dev" site, causing this file not to compile.
This commit reverts that code to use dev->subordinate again.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-25 18:22:46 -04:00
Chris Metcalf
d41ca6dfea tilegx pci: fix semantic merge conflict with 3527ed81c
Yinghai Lu removed pci_bus.subordinate in pci-next, which meant that
the tile-next changes to add tilegx PCI support don't build.  This
was expected (seen in linux-next) and this one-line fix is along
the same lines as commit b918c62e for all other architectures.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-25 18:22:18 -04:00
Linus Torvalds
6dd53aa456 PCI changes for the 3.6 merge window:
Host bridge hotplug
     - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
   Device hotplug
     - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
     - Call FINAL fixups for hot-added devices, too (Myron Stowe)
     - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
     - Remove all functions in a slot, not just those with _EJx (Amos Kong)
   Dynamic resource management
     - Track bus number allocation (struct resource tree per domain) (Yinghai Lu)
     - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu)
     - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
   Power management
     - Add PCIe runtime D3cold support (Huang Ying)
   Virtualization
     - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson)
     - Add quirks for devices with broken INTx masking (Jan Kiszka)
   Miscellaneous
     - Fix some PCI Express capability version issues (Myron Stowe)
     - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQBy+9AAoJEPGMOI97Hn6zOpQP+wVFvA7pcteFj6HPs5nTq2Hc
 55oeRqCO0wBHoFMCKB0AjeTATjqxi9OhcjaiVrZejxNyWKC9MnrXuunpQ0l/hCbR
 M/TK+BCelfX2FU4eXNf+TBCCcOhOVWqQft9Gm6nYKwX8Y0msRVCceI4WwhZgSwtI
 vdtmnqlwolscdnq+8ThsnvUMtwkN0gExmn2FJRl6EoEgG0DTqhMkZ83uA+NPBhvv
 I+g0XbA6haaZph2nnSYR0hIW4Q7JkT/LgA6uVAQxamctwxLol7xxsjCRnfqrulkf
 kaRr2fAgBXfmaOIltro4UkXrCM52ZSyggCDfExHp6mWGPKMjE5ZcyK1YbGfmmumk
 DS3t1S0eBdDJXrnf9l/Yb8e95dQxRCYKelKzr1rTD9QAXsInE8rC40hvhfFaTa4s
 nZYRTz0SKv6coQihqaOR7shx1DNomLFk7jndaWEElfl9/cT/nQnZ8XLfVMzkJNNB
 Y4SM6zkiIaCL0aiSEE16MqVjmODYRjbURLYzQIrqr2KJQg8X6XjIRojQLjL6xEgA
 22ry2ZRPhqO68g7aLqvixiSDaTp0Z0Vw+JmgjtBqvkokwZcGQtm4umkpAdOi+Es8
 3bJaMY7ZUpDX53FE8iyP6AnmR/1k19rC1gNnNq/syWyjtYOYJ9i3QCTafFgvE1VC
 5coQ1L5tByHvpzK5PHwf
 =oo/A
 -----END PGP SIGNATURE-----

Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...
2012-07-24 16:17:07 -07:00
Cong Wang
ecee6f9bd4 tile: remove km_type definitions
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-24 15:27:32 +08:00
Linus Torvalds
f0a08fcb59 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
 "These changes provide support for PCIe root complex and USB host mode
  for tilegx's on-chip I/Os.

  In addition, this pull provides the required underpinning for the
  on-chip networking support that was pulled into 3.5.  The changes have
  all been through LKML (with several rounds for PCIe RC) and on
  linux-next."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: updates to pci root complex from community feedback
  bounce: allow use of bounce pool via config option
  usb: add host support for the tilegx architecture
  arch/tile: provide kernel support for the tilegx USB shim
  tile pci: enable IOMMU to support DMA for legacy devices
  arch/tile: enable ZONE_DMA for tilegx
  tilegx pci: support I/O to arbitrarily-cached pages
  tile: remove unused header
  arch/tile: tilegx PCI root complex support
  arch/tile: provide kernel support for the tilegx TRIO shim
  arch/tile: break out the "csum a long" function to <asm/checksum.h>
  arch/tile: provide kernel support for the tilegx mPIPE shim
  arch/tile: common DMA code for the GXIO IORPC subsystem
  arch/tile: support MMIO-based readb/writeb etc.
  arch/tile: introduce GXIO IORPC framework for tilegx
2012-07-23 19:10:54 -07:00
Cong Wang
61d06c83fc tile: remove usage of enum km_type
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-23 14:11:23 +08:00
Linus Torvalds
55acdddbac Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp/hotplug changes from Ingo Molnar:
 "Various cleanups to the SMP hotplug code - a continuing effort of
  Thomas et al"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smpboot: Remove leftover declaration
  smp: Remove num_booting_cpus()
  smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]()
  POWERPC: Smp: remove call to ipi_call_lock()/ipi_call_unlock()
  SPARC: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq()
  ia64: SMP: Remove call to ipi_call_lock_irq()/ipi_call_unlock_irq()
  x86-smp-remove-call-to-ipi_call_lock-ipi_call_unlock
  tile: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
  S390: Smp: remove call to ipi_call_lock()/ipi_call_unlock()
  parisc: Smp: remove call to ipi_call_lock()/ipi_call_unlock()
  mn10300: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
  hexagon: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
2012-07-22 11:22:15 -07:00
Chris Metcalf
f6d2ce00da tile: updates to pci root complex from community feedback
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:54:16 -04:00
Chris Metcalf
f100625789 bounce: allow use of bounce pool via config option
The tilegx USB OHCI support needs the bounce pool since we're not
using the IOMMU to handle 32-bit addresses.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:35 -04:00
Chris Metcalf
47fc28bff8 usb: add host support for the tilegx architecture
This change adds OHCI and EHCI support for the tilegx's on-chip
USB hardware.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:29 -04:00
Chris Metcalf
d1cc1732cc arch/tile: provide kernel support for the tilegx USB shim
This change adds support for accessing the USB shim from within the
kernel.  Note that this change by itself does not allow the kernel
to act as a host or as a device; it merely exposes the built-in on-chip
hardware to the kernel.

The <arch/usb_host.h> and <arch/usb_host_def.h> headers are empty at
the moment because the kernel does not require any types or definitions
specific to the tilegx USB shim; the generic USB core code is all we need.
The headers are left in as stubs so that we don't need to modify the
hypervisor header (drv_usb_host_intf.h) from upstream.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:24 -04:00
Chris Metcalf
41bb38fc53 tile pci: enable IOMMU to support DMA for legacy devices
This change uses the TRIO IOMMU to map the PCI DMA space and physical
memory at different addresses.  We also now use the dma_mapping_ops
to provide support for non-PCI DMA, PCIe DMA (64-bit) and legacy PCI
DMA (32-bit).  We use the kernel's software I/O TLB framework
(i.e. bounce buffers) for the legacy 32-bit PCI device support since
there are a limited number of TLB entries in the IOMMU and it is
non-trivial to handle indexing, searching, matching, etc.  For 32-bit
devices the performance impact of bounce buffers should not be a concern.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:17 -04:00
Chris Metcalf
eef015c8aa arch/tile: enable ZONE_DMA for tilegx
This is required for PCI root complex legacy support and USB OHCI root
complex support.  With this change tilegx now supports allocating memory
whose PA fits in 32 bits.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:11 -04:00
Chris Metcalf
bbaa22c3a0 tilegx pci: support I/O to arbitrarily-cached pages
The tilegx PCI root complex support (currently only in linux-next)
is limited to pages that are homed on cached in the default manner,
i.e. "hash-for-home".  This change supports delivery of I/O data to
pages that are cached in other ways (locally on a particular core,
uncached, user-managed incoherent, etc.).

A large part of the change is supporting flushing pages from cache
on particular homes so that we can transition the data that we are
delivering to or from the device appropriately.  The new homecache_finv*
routines handle this.

Some changes to page_table_range_init() were also required to make
the fixmap code work correctly on tilegx; it hadn't been used there
before.

We also remove some stub mark_caches_evicted_*() routines that
were just no-ops anyway.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:05 -04:00
Paul Bolle
3e219b9153 tile: remove unused header
Nothing includes memprof.h. Nothing uses the macros it defines. It seems
it is just a remnant of the proposed memprof functionality, which got
dropped before the Tilera architecture got added to the tree. This
header can safely be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:40:00 -04:00
Chris Metcalf
129622672d arch/tile: tilegx PCI root complex support
This change implements PCIe root complex support for tilegx using
the kernel support layer for accessing the TRIO hardware shim.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> [changes in 07487f3]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:39:11 -04:00
Chris Metcalf
bce5bbbb23 arch/tile: provide kernel support for the tilegx TRIO shim
Provide kernel support for the tilegx "Transaction I/O" (TRIO) on-chip
hardware.  This hardware implements the PCIe interface for tilegx;
the driver changes to use TRIO for PCIe are in a subsequent commit.

The change is layered on top of the tilegx GXIO IORPC subsystem.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:58 -04:00
Chris Metcalf
10104a1ad6 arch/tile: break out the "csum a long" function to <asm/checksum.h>
This makes it available to the tilegx network driver.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:57 -04:00
Chris Metcalf
4875f69fec arch/tile: provide kernel support for the tilegx mPIPE shim
The TILE-Gx chip includes a packet-processing network engine called
mPIPE ("Multicore Programmable Intelligent Packet Engine").  This
change adds support for using the mPIPE engine from within the
kernel.  The engine has more functionality than is exposed here,
but to keep the kernel code and binary simpler, this is a subset
of the full API designed to enable standard Linux networking only.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:55 -04:00
Chris Metcalf
6369798037 arch/tile: common DMA code for the GXIO IORPC subsystem
The dma_queue support is used by both the mPipe (networking)
and Trio (PCI) hardware shims on tilegx.  This common code is
selected when either of those drivers is built.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:54 -04:00
Chris Metcalf
44e5696710 arch/tile: support MMIO-based readb/writeb etc.
Add support for MMIO read/write on tilegx to support GXIO IORPC access.
Similar to the asm-generic version, but we include memory fences on
the writes to be conservative.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:53 -04:00
Chris Metcalf
37b82b5de7 arch/tile: introduce GXIO IORPC framework for tilegx
The GXIO I/O RPC subsystem handles exporting I/O hardware resources to
Linux and to applications running under Linux.

For instance, memory which is made available for I/O DMA must be mapped
by an I/O TLB; that means that such memory must be locked down by Linux,
so that it is not swapped or otherwise reused, as long as those I/O
TLB entries are active. Similarly, configuring direct hardware access
introduces new validation requirements. If a user application registers
memory, Linux must ensure that the supplied virtual addresses are valid,
and turn them into client physical addresses. Similarly, when Linux then
supplies those client physical addresses to the Tilera hypervisor, it
must in turn validate those before turning them into the real physical
addresses which are required by the hardware.

To the extent that these sorts of activities were required on previous
TILE architecture processors, they were implemented in a device-specific
fashion. This meant that every I/O device had its own Tilera hypervisor
driver, its own Linux driver, and in some cases its own user-level
library support. There was a large amount of more-or-less functionally
identical code in different places, particularly in the different Linux
drivers. For TILE-Gx, this support has been generalized into a common
framework, known as the I/O RPC framework or just IORPC.

The two "gxio" directories (one for headers, one for sources) start
with just a few files in each with this infrastructure commit, but
after adding support for the on-board I/O shims for networking, PCI,
USB, crypto, compression, I2CS, etc., there end up being about 20 files
in each directory.

More information on the IORPC framework is in the <hv/iorpc.h> header,
included in this commit.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11 16:04:52 -04:00
Bjorn Helgaas
85a00dd391 Merge branch 'pci/myron-pcibios_setup' into next
* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
2012-07-05 15:31:05 -06:00
Myron Stowe
7477dc291b tile/PCI: factor out pcibios_setup()
The PCI core provides a generic pcibios_setup() routine.  Drop this
architecture-specific version in favor of that.

Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-05 15:09:13 -06:00
Paul Bolle
00cd7dc702 Remove useless wrappers of asm-generic/ipc.h
mn10300 has a header (in its include/asm directory) that is a thin
wrapper around asm-generic/ipc.h. This wrapper is useless, since that
header doesn't exist. It is also unused (no file includes asm/ipc.h).

hexagon and tile generate similar headers at build time (using a
generic-y entry in include/asm/Kbuild). These generated headers are
useless and unused too.

Remove this header and these generic-y entries.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David Howells <dhowells@redhat.com> [MN10300]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-06-28 11:28:59 +02:00
Chris Metcalf
9e0304e388 arch/tile: big-endian: properly bswap instruction bundles when backtracing
Instruction bundles are always little-endian, even when running in
big-endian mode.  I missed this internal bug fix when cherry-picking
the big-endian code to return to the community.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-18 13:11:21 -04:00
Chris Metcalf
6699c8cda3 tile: fix bug in get_user() for 4-byte values
The definition of 32-bit values in the 64-bit tilegx architecture is that
they should be sign-extended regardless of whether they are considered
signed or unsigned by the compiler.  Accordingly, we need to use an
"ld4s" rather than "ld4u" to load and sign-extend for get_user().

This fixes glibc bug 14238 (see http://sourceware.org/bugzilla),
introduced during the 3.5 merge window.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-16 16:56:13 -04:00
Yinghai Lu
b17c0e6f66 tile/PCI: use pci_scan_root_bus instead pci_scan_bus
It will update busn_res accordingly, so we get that for last_busno.

Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13 15:42:24 -06:00
Yinghai Lu
b918c62e08 PCI: replace struct pci_bus secondary/subordinate with busn_res
Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13 15:42:22 -06:00
Chris Metcalf
2ded5c2484 tile: add #include to unbreak build after generic init_task conversion
Some code was moved from init_task.c to setup.c but the appropriate
header needed to be moved as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-06 11:29:35 -04:00
Chris Metcalf
10db9e009a tile: remove cpu_idle_on_new_stack
This routine isn't used unless CONFIG_HOMECACHE is enabled, which
isn't even available as a public configuration option yet.
Since it no longer links correctly in 3.4, just remove it for now.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-06 11:29:31 -04:00
Yong Zhang
8efdfc3a4e tile: SMP: Remove call to ipi_call_lock()/ipi_call_unlock()
ipi_call_lock/unlock() lock resp. unlock call_function.lock. This lock
protects only the call_function data structure itself, but it's
completely unrelated to cpu_online_mask. The mask to which the IPIs
are sent is calculated before call_function.lock is taken in
smp_call_function_many(), so the locking around set_cpu_online() is
pointless and can be removed.

[ tglx: Massaged changelog ]

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: ralf@linux-mips.org
Cc: sshtylyov@mvista.com
Cc: david.daney@cavium.com
Cc: nikunj@linux.vnet.ibm.com
Cc: paulmck@linux.vnet.ibm.com
Cc: axboe@kernel.dk
Cc: peterz@infradead.org
Cc: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/1338275765-3217-6-git-send-email-yong.zhang0@gmail.com
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-06-05 17:27:12 +02:00
Linus Torvalds
86c47b70f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull third pile of signal handling patches from Al Viro:
 "This time it's mostly helpers and conversions to them; there's a lot
  of stuff remaining in the tree, but that'll either go in -rc2
  (isolated bug fixes, ideally via arch maintainers' trees) or will sit
  there until the next cycle."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  x86: get rid of calling do_notify_resume() when returning to kernel mode
  blackfin: check __get_user() return value
  whack-a-mole with TIF_FREEZE
  FRV: Optimise the system call exit path in entry.S [ver #2]
  FRV: Shrink TIF_WORK_MASK [ver #2]
  FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions
  new helper: signal_delivered()
  powerpc: get rid of restore_sigmask()
  most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
  set_restore_sigmask() is never called without SIGPENDING (and never should be)
  TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set
  don't call try_to_freeze() from do_signal()
  pull clearing RESTORE_SIGMASK into block_sigmask()
  sh64: failure to build sigframe != signal without handler
  openrisc: tracehook_signal_handler() is supposed to be called on success
  new helper: sigmask_to_save()
  new helper: restore_saved_sigmask()
  new helpers: {clear,test,test_and_clear}_restore_sigmask()
  HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01 11:53:44 -07:00
Linus Torvalds
1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Al Viro
efee984c27 new helper: signal_delivered()
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:52 -04:00
Al Viro
77097ae503 most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:51 -04:00
Al Viro
edd63a2763 set_restore_sigmask() is never called without SIGPENDING (and never should be)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:50 -04:00
Al Viro
a610d6e672 pull clearing RESTORE_SIGMASK into block_sigmask()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:49 -04:00
Al Viro
b7f9a11a6c new helper: sigmask_to_save()
replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:48 -04:00
Al Viro
51a7b448d4 new helper: restore_saved_sigmask()
first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper.  Open-coded instances switched...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
Al Viro
4ebefe3ec7 new helpers: {clear,test,test_and_clear}_restore_sigmask()
helpers parallel to set_restore_sigmask(), used in the next commits

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:47 -04:00
Linus Torvalds
fb21affa49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull second pile of signal handling patches from Al Viro:
 "This one is just task_work_add() series + remaining prereqs for it.

  There probably will be another pull request from that tree this
  cycle - at least for helpers, to get them out of the way for per-arch
  fixes remaining in the tree."

Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  keys: kill task_struct->replacement_session_keyring
  keys: kill the dummy key_replace_session_keyring()
  keys: change keyctl_session_to_parent() to use task_work_add()
  genirq: reimplement exit_irq_thread() hook via task_work_add()
  task_work_add: generic process-context callbacks
  avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
  parisc: need to check NOTIFY_RESUME when exiting from syscall
  move key_repace_session_keyring() into tracehook_notify_resume()
  TIF_NOTIFY_RESUME is defined on all targets now
2012-05-31 18:47:30 -07:00
Al Viro
bb8ac181a5 bury __kernel_nlink_t, make internal nlink_t consistent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30 21:04:50 -04:00
Linus Torvalds
fa2af6e4fe Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull tile updates from Chris Metcalf:
 "These changes cover a range of new arch/tile features and
  optimizations.  They've been through LKML review and on linux-next for
  a month or so.  There's also one bug-fix that just missed 3.4, which
  I've marked for stable."

Fixed up trivial conflict in arch/tile/Kconfig (new added tile Kconfig
entries clashing with the generic timer/clockevents changes).

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: default to tilegx_defconfig for ARCH=tile
  tile: fix bug where fls(0) was not returning 0
  arch/tile: mark TILEGX as not EXPERIMENTAL
  tile/mm/fault.c: Port OOM changes to handle_page_fault
  arch/tile: add descriptive text if the kernel reports a bad trap
  arch/tile: allow querying cpu module information from the hypervisor
  arch/tile: fix hardwall for tilegx and generalize for idn and ipi
  arch/tile: support multiple huge page sizes dynamically
  mm: add new arch_make_huge_pte() method for tile support
  arch/tile: support kexec() for tilegx
  arch/tile: support <asm/cachectl.h> header for cacheflush() syscall
  arch/tile: Allow tilegx to build with either 16K or 64K page size
  arch/tile: optimize get_user/put_user and friends
  arch/tile: support building big-endian kernel
  arch/tile: allow building Linux with transparent huge pages enabled
  arch/tile: use interrupt critical sections less
2012-05-25 15:59:38 -07:00
Chris Metcalf
1fcb78e9da tile: default to tilegx_defconfig for ARCH=tile
There is no "ARCH=tile" (just like there is no "ARCH=x86") so we need
to pick a default configuration, either tilepro or tilegx, when users
specify ARCH=tile.  We'll use tilegx, since that's our current chip.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 15:02:43 -04:00
Chris Metcalf
9f1d62bed7 tile: fix bug where fls(0) was not returning 0
This is because __builtin_clz(0) returns 64 for the "undefined" case
of 0, since the builtin just does a right-shift 32 and "clz" instruction.
So, use the alpha approach of casting to u32 and using __builtin_clzll().

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 15:00:43 -04:00
Chris Metcalf
acd1a19e00 arch/tile: mark TILEGX as not EXPERIMENTAL
Also create a TILEPRO config setting to use for #ifdefs where it
is cleaner to do so, and make the 64BIT setting depend directly
on the setting of TILEGX.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 15:00:39 -04:00