Commit Graph

1026 Commits

Author SHA1 Message Date
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Randy Dunlap
e4c9dd0fba kmap_types: make most arches use generic header file
Convert most arches to use asm-generic/kmap_types.h.

Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h,
controlled by __WITH_KM_FENCE from each arch's kmap_types.h file.

Would be nice to be able to add custom KM_types per arch, but I don't yet
see a nice, clean way to do that.

Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and
68k(tonyb).

Note: avr32 should be able to remove KM_PTE2 (since it's not used) and
then just use the generic kmap_types.h file.  Get avr32 maintainer
approval.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:51 -07:00
Alexey Dobriyan
bb1f17b037 mm: consolidate init_mm definition
* create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:

  init_mm is already unexported on x86.

  One strange place is some OMAP driver (drivers/video/omap/) which
  won't build modular, but it's already wants get_vm_area() export.
  Somebody should look there.

[akpm@linux-foundation.org: add missing #includes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:28 -07:00
Linus Torvalds
8d6cea5111 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
  Blackfin: hook up new rt_tgsigqueueinfo syscall
  Blackfin: improve CLKIN_HZ config default
  Blackfin: initial support for ftrace grapher
  Blackfin: initial support for ftrace
  Blackfin: enable support for LOCKDEP
  Blackfin: add preliminary support for STACKTRACE
  Blackfin: move custom sections into sections.h
  Blackfin: punt unused/wrong mutex-dec.h
  Blackfin: add support for irqflags
  Blackfin: add support for bzip2/lzma compressed kernel images
  Blackfin: convert Kconfig style to def_bool
  Blackfin: bf548-ezkit: update smsc911x resources
  Blackfin: update aedos-ipipe code to upstream 1.10-00
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash
  Blackfin: define SPI IRQ in board resources
  Blackfin: do not configure the UART early if on wrong processor
  Blackfin: fix deadlock in SMP IPI handler
  Blackfin: fix flag storage for irq funcs
  Blackfin: push down exception oops checking
  ...
2009-06-16 11:49:58 -07:00
Linus Torvalds
489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Mike Frysinger
61cdd7a28f Blackfin: hook up new rt_tgsigqueueinfo syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:23:18 -04:00
Mike Frysinger
d0cb9b4ef6 Blackfin: improve CLKIN_HZ config default
Most boards use 25000000 as the default HZ, so rather than add a whole
bunch more boards, make it the default for everyone.  This also fixes
randconfig builds as there was no default before.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:16 -04:00
Mike Frysinger
1ee76d7e16 Blackfin: initial support for ftrace grapher
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:16 -04:00
Mike Frysinger
1c873be744 Blackfin: initial support for ftrace
Just the basic ftrace support here -- mcount and the ftrace stub.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:15 -04:00
Mike Frysinger
6fa68e7a7f Blackfin: enable support for LOCKDEP
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:15 -04:00
Mike Frysinger
c7b412f41d Blackfin: add preliminary support for STACKTRACE
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:14 -04:00
Mike Frysinger
5203fa82f3 Blackfin: move custom sections into sections.h
The Blackfin arch has a bunch of custom section markings for its on-chip
regions, but they aren't declared in the right header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:14 -04:00
Mike Frysinger
e38eb89210 Blackfin: punt unused/wrong mutex-dec.h
Looks like the mutex-dec.h header file was incorrectly copied into the
Blackfin asm path.  Nothing uses it, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:14 -04:00
Mike Frysinger
8f86001f76 Blackfin: add support for irqflags
This converts the irq handling in the Blackfin arch from the old irq.h /
system.h method to the new irqflags.h.  A stepping stone on the way to
other tracing functionality.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:13 -04:00
Mike Frysinger
538067c822 Blackfin: add support for bzip2/lzma compressed kernel images
Since U-Boot can support these compression types, add appropriate targets
to the Blackfin boot files.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:13 -04:00
Mike Frysinger
bac7d89ebe Blackfin: convert Kconfig style to def_bool
Makes the file easier to read when there isn't so much clutter.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:12 -04:00
Mike Frysinger
7a8b71db9d Blackfin: bf548-ezkit: update smsc911x resources
The older smsc911x driver made platform data optional, but the newer one
always requires it, so add proper settings to the BF548-EZKIT.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:12 -04:00
Yi Li
6640cfa82b Blackfin: update aedos-ipipe code to upstream 1.10-00
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:11 -04:00
Mike Frysinger
4f84b6e0bb Blackfin: bf537-stamp: update ADP5520 resources
The ADP5520 hooks up to PF7 rather than PG0.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:11 -04:00
Graf Yang
a427293f84 Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash
The SPI flash on the BF518F-EZBRD board is actually hooked up to CS2,
not CS1, so make sure the resources are correct.

URL: http://blackfin.uclinux.org/gf/tracker/5220
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:11 -04:00
Yi Li
53122693c3 Blackfin: define SPI IRQ in board resources
The Blackfin SPI driver can be driven by an IRQ now, so declare it in
the board resources.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:10 -04:00
Robin Getz
54ebae7166 Blackfin: do not configure the UART early if on wrong processor
Before we configure the early UART, check to make sure we are running on
the expected processor - otherwise, we cause problems by configuring pins
that don't exist (and causing an infinite loop of faults).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:10 -04:00
Sonic Zhang
86f2008bf5 Blackfin: fix deadlock in SMP IPI handler
When a low priority interrupt (like ethernet) is triggered between 2 high
priority IPI messages, a deadlock in disable_irq() is hit by the second
IPI handler.  This is because the second IPI message is queued within the
first IPI handler, but the handler doesn't process all messages, and new
ones are inserted rather than appended.  So now we process all the pending
messages, and append new ones to the pending list.

URL: http://blackfin.uclinux.org/gf/tracker/5226
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Mike Frysinger
f9ee3ab81c Blackfin: fix flag storage for irq funcs
The IRQ functions take an "unsigned long" flags variable, not any other
type, so fix the places where we use "int" or "long".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Mike Frysinger
82bd1d7d45 Blackfin: push down exception oops checking
Rather than maintain a duplicate list of valid exceptions we can take in
the kernel both in the first if() check and the switch() check, delay the
oops check to after the switch().  All valid exceptions will have returned
by this point leaving only the invalid ones.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Mike Frysinger
6510a20e1b Blackfin: fix trap_c() exit paths
The trap_c() code pushes the hardware trace status onto the stack, but
doesn't always restore it when returning from some trap code paths.  So
unify the exit code paths to all head to the end of the function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:09 -04:00
Sonic Zhang
47e9dedb72 Blackfin: add blackfin_invalidate_entire_icache for SMP systems
The KGDB code uses this when switching processors to make sure the icache
is in a valid state.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Robin Getz
2466ac6556 Blackfin: include the cpu compiled version in /proc/cpuinfo
Since the compiled-for cpu revision can be significant, include it in the
cpuinfo output along side the cpu revision we're currently running on.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Mike Frysinger
70f12567ac Blackfin: add support for GENERIC_BUG
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:07 -04:00
Jie Zhang
67834fa93d Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheable
The latter naming convention is much more common.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:06 -04:00
Mike Frysinger
aa286ba3ae Blackfin: export ip_compute_csum/csum_partial_copy_from_user symbols
All other arches do this, and some places like the net/scsi code will fail
as modules without them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:06 -04:00
Robin Getz
16aadcb680 Blackfin: only handle CPLB protection violations when MPU is enabled
We don't need to handle CPLB protection violations unless we are running
with the MPU on.  Fix the entry code to call common trap_c, and remove the
code which is never run.  This allows the traps test suite to run on older
boards with the MPU disabled.

URL: http://blackfin.uclinux.org/gf/tracker/5129
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:06 -04:00
Linus Torvalds
cd166bd0dd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  add generic lib/checksum.c
  asm-generic: add a generic uaccess.h
  asm-generic: add generic NOMMU versions of some headers
  asm-generic: add generic atomic.h and io.h
  asm-generic: add legacy I/O header files
  asm-generic: add generic versions of common headers
  asm-generic: make bitops.h usable
  asm-generic: make pci.h usable directly
  asm-generic: make get_rtc_time overridable
  asm-generic: rename page.h and uaccess.h
  asm-generic: rename atomic.h to atomic-long.h
  asm-generic: add a generic unistd.h
  asm-generic: add generic ABI headers
  asm-generic: add generic sysv ipc headers
  asm-generic: introduce asm/bitsperlong.h
  asm-generic: rename termios.h, signal.h and mman.h
2009-06-12 18:15:51 -07:00
Pavel Machek
4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Mike Frysinger
bf664c0a3a Blackfin: fix sparseirq/kstat_irqs fallout
The sparseirq changes (d7e51e66) played poorly with the Blackfin irqchip
implementation as we're still using the old hardirq method.  Our bad irq
structure had a NULL kstat_irqs field so when all the common code tries
to increment this field, everything goes big bada boom.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:36 -04:00
Mike Frysinger
ce0bf52dd3 Blackfin: fix unused warnings after nommu update
The massive nommu update (8feae131) left the local variable "vml" unused,
so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:35 -04:00
Robin Getz
81f7f45606 Blackfin: export the last exception cause via debugfs
We have some test code that runs in userspace that exercises the exception
handling of the Blackfin pretty thoroughly.  Part of the validation process
is checking the exact exception triggered, so export the last one seen to
userspace via debugfs when debugging is enabled for the test code to check.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:15:28 -04:00
Roel Kluin
0a99061426 Blackfin: fix length checking in kgdb_ebin2mem
The kgdb_ebin2mem() was decrementing the count variable to do parsing, but
then later still tries to use it based on its original meaning.  So leave
it untouched and use a different variable to walk the memory.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:07 -04:00
Mike Frysinger
11aca0e735 Blackfin: kgdb: fix up error return values
The Blackfin kgdb code was all passing back positive errno values when it
really should have been using negative errno values.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:06 -04:00
Mike Frysinger
a43b739f25 Blackfin: push access_ok() L1 attribute down
There is no need for the L1 attribute to be on the prototype of the
access_ok() function as all consumers of the function do not care where it
lives -- they'll always use pcrel calls to get to it.  This prevents
pointless recompiles of most of the system when this config option changes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:05 -04:00
Mike Frysinger
8d0d8f2a3a Blackfin: punt duplicated search_exception_table() prototype
The common code already has a prototype for this function and we don't use
it anywhere in the Blackfin code, so punt it from the Blackfin headers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:03 -04:00
Robin Getz
a8372b5ca6 Blackfin: add missing access_ok() checks to user functions
The core string/clear user functions weren't checking the user pointers
which caused kernel crashes with some bad programs and tests (like LTP).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:02 -04:00
Mike Frysinger
685a694f06 Blackfin: convert early_printk EVT init to a loop
The EVT registers are all contiguous in the memory map, so using a loop to
initialize them all rather than hardcoding the list results in much better
generated code (a hardware loop rather than a whole bunch of individual
loads).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:01 -04:00
Mike Frysinger
f1db88d2a7 Blackfin: document the lsl variants of the L1 allocator
Make sure the meaning of "lsl" is covered somewhere and it is clear why we
somewhat duplicate the sram alloc/free functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:12:00 -04:00
Mike Frysinger
595d681f2c Blackfin: rename Blackfin relocs according to the toolchain
The latest Blackfin toolchain has fixed its relocation scheme to match
other ports: always use R_BFIN_ prefix and capitalize everything.  This
brings the kernel in line with those fixes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:59 -04:00
Mike Frysinger
780172bf87 Blackfin: check SIC defines rather than variant names
Rather than having to maintain a hard coded list of Blackfin variants, use
the SIC defines themselves.  This fixes build problems on BF51x/BF538 under
some configurations as they were missing from one of the lists.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:58 -04:00
Sonic Zhang
ea8538a039 Blackfin: add SSYNC to set_dma_sg() for descriptor fetching
Make sure the internal core buffers are flushed before telling the DMA
engine to fetch the descriptor structure so that it gets the right values.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:57 -04:00
Graf Yang
9b9bfded62 Blackfin: convert SMP to only use generic time framework
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:56 -04:00
Michael Hennerich
ffc4d8bc44 Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:55 -04:00
Mike Frysinger
79df1b6947 Blackfin: override default uClinux MTD addr/size
Due to a processor anomaly (05000263 to be exact), most Blackfin parts
cannot keep the embedded filesystem image directly after the kernel in
RAM.  Instead, the filesystem needs to be relocated to the end of memory.
As such, we need to tweak the map addr/size during boot for Blackfin
systems.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:53 -04:00