Commit Graph

10 Commits

Author SHA1 Message Date
Kevin Hilman
5876c940c0 OMAP2+: VC: more registers are per-channel starting with OMAP5
Starting with OMAP5, the following registers are per-channel and not
common to a all VC channels:

 - SMPS I2C slave address
 - SMPS voltage register address offset
 - SMPS cmd/value register address offset
 - VC channel configuration register

Move these from the channel-common struct into the per-channel struct
to support OMAP5.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:09:22 -07:00
Kevin Hilman
8abc0b58fd OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel
On OMAP3+, all VC channels have the the same bitfield ordering for all
VC channels, except the OMAP4 MPU channel.  This appears to be a freak
accident as all other VC channel (including OMAP5) have the standard
configuration.  Handle the mutant case by adding a per-channel flag
to signal the deformity and handle it during VC init.

Special thanks to Nishanth Menon <nm@ti.com> for finding this problem
and for proposing the initial solution.

Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:08:58 -07:00
Kevin Hilman
f5395480f5 OMAP3+: VC: make I2C config programmable with PMIC-specific settings
Remove hard-coded I2C configuration in favor of settings that can be
configured from PMIC-specific values.  Currently only high-speed mode
and the master-code value are supported, since they were the only
fields currently used, but extending this is now trivial.

Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse
problem and making omap_vc_i2c_init() static, as well as finding and
fixing a problem with the shift/mask of mcode.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:08:58 -07:00
Kevin Hilman
24d3194a2c OMAP3+: VC: abstract out channel configuration
VC channel configuration is programmed based on settings coming from
the PMIC configuration.

Currently, the VC channel to PMIC mapping is a simple one-to-one
mapping.  Whenever a VC channel parameter is configured (i2c slave
addres, PMIC register address, on/ret/off command), the corresponding
bits are enabled in the VC channel configuration register.

If necessary, the programmability of channel configuration settings
could be extended to board/PMIC files, however, because this patch
changes the channel configuration to be programmed based on existing
values from the PMIC settings, it may not be required.

Also note that starting with OMAP4, where there are more than 2
channels, one channel is identified as the "default" channel.  When
any of the bits in the channel config for the other channels are zero,
it means to use the default channel.  The OMAP4 TRM (at least through
NDA version Q) is wrong in describing which is the default channel.
The default channel on OMAP4 is MPU, not CORE as decribed in the TRM.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:08:57 -07:00
Kevin Hilman
e4e021c549 OMAP3+: VC: cleanup PMIC register address configuration
- support both voltage register address and command register address
  for each VC channel
- add fields for voltage register address (volra) and command register
  address (cmdra) to struct omap_vc_channel
- use VC/VP register access read/modify/write helper
- remove volra_shift field (use __ffs(mask) for shift value)
- I2C addresses 10-bit, change size to u16

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:02:56 -07:00
Kevin Hilman
ba112a4e86 OMAP3+: VC: cleanup i2c slave address configuration
- Add an i2c_slave_address field to the omap_vc_channel
- use VC/VP read/modify/write helper instead of open-coding
- remove smps_sa_shift, use __ffs(mask) for shift value
- I2C addresses 10-bit, change size to u16

Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting
the use of __ffs(x) instead of ffs(x) - 1.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:02:55 -07:00
Kevin Hilman
4bcc475ebd OMAP3+: voltage: convert to PRM register access functions
Convert VC/VP register access to use PRM VC/VP accessor functions.  In
the process, move the read/write function pointers from vdd_info into
struct voltagedomain.

No functional changes.

Additional cleanup:
- remove prm_mod field from  VC/VP data structures, the PRM register
  access functions know which PRM module to use.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 12:02:08 -07:00
Kevin Hilman
d84adcf46b OMAP2+: voltage: move VC into struct voltagedomain, misc. renames
Move the VC instance struct from omap_vdd_info into struct voltagedomain.
While moving, perform some misc. renames for readability.

No functional changes.

Summary of renames:
- rename omap_vc_instance to omap_vc_channel, since there is only
  one instance of the VC IP and this actually represents channels
  using TRM terminology.
- rename 'vc_common' field of VC channel which led to:
  s/vc->vc_common/vc->common/
- remove redundant '_data' suffix
- OMAP3: vc1 --> vc_mpu, vc2 --> vc_core
- omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale()

Signed-off-by: Kevin Hilman <khilman@ti.com>

merge
2011-09-15 11:39:10 -07:00
Kevin Hilman
a7460daf15 OMAP2+: voltage: move PRCM mod offets into VC/VP structures
Eliminate need for global variables for the various PRM module offsets by
making them part of the VP/VC common structures

Eventually, these will likely be moved again, or more likely removed
when VP/VC code is isolated, but for now just getting rid of them as
global variabes so that the voltage domain initialization can be
cleaned up.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-15 11:39:09 -07:00
Paul Walmsley
c0718df4d6 OMAP2+: voltage: reorganize, split code from data
This is a first pass at reorganizing mach-omap2/voltage.c:

- Separate almost all of the data from the code of mach-omap2/voltage.c.
  The code remains in mach-omap2/voltage.c.  The data goes into one
  of several places, depending on what type of data it is:

  - Silicon process/validation data: mach-omap2/opp*_data.c
  - VC (Voltage Controller) data: mach-omap2/vc*_data.c
  - VP (Voltage Processor) data: mach-omap2/vp*_data.c
  - Voltage domain data: mach-omap2/voltagedomains*_data.c

  The ultimate goal is for all this data to be autogenerated, the same
  way we autogenerate the rest of our data.

- Separate VC and VP common data from VDD-specific VC and VP data.

- Separate common voltage.c code from SoC-specific code; reuse common code.

- Reorganize structures to avoid unnecessary memory loss due to unpacked
  fields.

There is much left to be done.  VC code and VP code should be separated out
into vc*.c and vp*.c files.  Many fields in the existing structures are
superfluous, and should be removed.  Some code in voltage.c seems to be
duplicated; that code should be moved into functions of its own.  Proper
voltage domain code should be created, as was done with the powerdomain
and clockdomains, and powerdomains should reference voltagedomains.

Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments.  Thanks
to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs
that prevented OMAP4 from booting:

   https://patchwork.kernel.org/patch/587311/

His patch has been folded into this one to avoid breaking OMAP4
between patches.  Thanks also to Kevin Hilman <khilman@ti.com> for
finding and fixing a compile problem when !CONFIG_PM:

   http://www.spinics.net/lists/arm-kernel/msg118067.html

His patch has also been folded into this one to avoid breaking
!CONFIG_PM builds.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Shweta Gulati <shweta.gulati@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
2011-03-10 22:17:45 -07:00