Commit Graph

183 Commits

Author SHA1 Message Date
Randy Dunlap
9f1583339a [PATCH] use add_taint() for setting tainted bit flags
Use the add_taint() interface for setting tainted bit flags instead of
doing it manually.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:29 -07:00
Andi Kleen
5b952b3c14 [PATCH] Fix MPOL_F_VERIFY
There was a pretty bad bug in there that the code would always check the full
VMA, not the range the user requested.

When the VMA to be checked was merged with the previous VMA this could lead to
spurious failures.

Signed-off-by: "Andi Kleen" <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:28 -07:00
Con Kolivas
8d0986e289 [PATCH] vm: kswapd cleanup: use pgdat
Use the pgdat pointer we've already defined in wakeup_kswapd

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:28 -07:00
Andi Kleen
5d3d0f7704 [PATCH] x86-64: Reverse order of bootmem lists
This leads to bootmem allocating first from node 0 instead
of from the last node.  This avoids swiotlb allocating on the last node, which
doesn't really work on a machine with >4GB.

Note: there is a better patch around from someone else that gets
rid of the pgdat list completely.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 10:49:56 -07:00
Greg Ungerer
66aa2b4b1c [PATCH] uclinux: add NULL check, 0 end valid check and some more exports to nommu.c
Move call to get_mm_counter() in update_mem_hiwater() to be
inside the check for tsk->mm being null. Otherwise you can be
following a null pointer here. This patch submitted by
Javier Herrero <jherrero@hvsistemas.es>.

Modify the end check for munmap regions to allow for the
legacy behavior of 0 being valid. Pretty much all current
uClinux system libc malloc's pass in 0 as the end point.
A hard check will fail on these, so change the check so
that if it is non-zero it must be valid otherwise it fails.
A passed in value will always succeed (as it used too).

Also export a few more mm system functions - to be consistent
with the VM code exports.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11 20:43:47 -07:00
Nishanth Aravamudan
13e4b57f6a [PATCH] mm: fix-up schedule_timeout() usage
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:37 -07:00
Renaud Lienhart
207f36eec9 [PATCH] remove invalid comment in mm/page_alloc.c
free_pages_bulk() doesn't free the entire list if count == 0.

Signed-off-by: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:31 -07:00
Victor Fusco
9de75d110c [PATCH] mm/swap_state: Fix "nocast type" warnings
Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:28 -07:00
Victor Fusco
b2d550736f [PATCH] mm/slab: fix sparse warnings
Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:26 -07:00
Adrian Bunk
5ce7852cdf [PATCH] mm/filemap.c: make two functions static
With Nick Piggin <npiggin@suse.de>

Give some things static scope.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:25 -07:00
Ingo Molnar
8d06afab73 [PATCH] timer initialization cleanup: DEFINE_TIMER
Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Pekka Enberg
80e93effce [PATCH] update kfree, vfree, and vunmap kerneldoc
This patch clarifies NULL handling of kfree() and vfree().  I addition,
wording of calling context restriction for vfree() and vunmap() are changed
from "may not" to "must not."

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:43 -07:00
Christoph Lameter
e498be7daf [PATCH] Numa-aware slab allocator V5
The NUMA API change that introduced kmalloc_node was accepted for
2.6.12-rc3.  Now it is possible to do slab allocations on a node to
localize memory structures.  This API was used by the pageset localization
patch and the block layer localization patch now in mm.  The existing
kmalloc_node is slow since it simply searches through all pages of the slab
to find a page that is on the node requested.  The two patches do a one
time allocation of slab structures at initialization and therefore the
speed of kmalloc node does not matter.

This patch allows kmalloc_node to be as fast as kmalloc by introducing node
specific page lists for partial, free and full slabs.  Slab allocation
improves in a NUMA system so that we are seeing a performance gain in AIM7
of about 5% with this patch alone.

More NUMA localizations are possible if kmalloc_node operates in an fast
way like kmalloc.

Test run on a 32p systems with 32G Ram.

w/o patch
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.36  100       485.3640     11.99      1.91   Sat Apr 30 14:01:51 2005
  100    26582.63   88       265.8263     21.89    144.96   Sat Apr 30 14:02:14 2005
  200    29866.83   81       149.3342     38.97    286.08   Sat Apr 30 14:02:53 2005
  300    33127.16   78       110.4239     52.71    426.54   Sat Apr 30 14:03:46 2005
  400    34889.47   80        87.2237     66.72    568.90   Sat Apr 30 14:04:53 2005
  500    35654.34   76        71.3087     81.62    714.55   Sat Apr 30 14:06:15 2005
  600    36460.83   75        60.7681     95.77    853.42   Sat Apr 30 14:07:51 2005
  700    35957.00   75        51.3671    113.30    990.67   Sat Apr 30 14:09:45 2005
  800    33380.65   73        41.7258    139.48   1140.86   Sat Apr 30 14:12:05 2005
  900    35095.01   76        38.9945    149.25   1281.30   Sat Apr 30 14:14:35 2005
 1000    36094.37   74        36.0944    161.24   1419.66   Sat Apr 30 14:17:17 2005

w/patch
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.27  100       484.2736     12.02      1.93   Sat Apr 30 15:59:45 2005
  100    28262.03   90       282.6203     20.59    143.57   Sat Apr 30 16:00:06 2005
  200    32246.45   82       161.2322     36.10    282.89   Sat Apr 30 16:00:42 2005
  300    37945.80   83       126.4860     46.01    418.75   Sat Apr 30 16:01:28 2005
  400    40000.69   81       100.0017     58.20    561.48   Sat Apr 30 16:02:27 2005
  500    40976.10   78        81.9522     71.02    696.95   Sat Apr 30 16:03:38 2005
  600    41121.54   78        68.5359     84.92    834.86   Sat Apr 30 16:05:04 2005
  700    44052.77   78        62.9325     92.48    971.53   Sat Apr 30 16:06:37 2005
  800    41066.89   79        51.3336    113.38   1111.15   Sat Apr 30 16:08:31 2005
  900    38918.77   79        43.2431    134.59   1252.57   Sat Apr 30 16:10:46 2005
 1000    41842.21   76        41.8422    139.09   1392.33   Sat Apr 30 16:13:05 2005

These are measurement taken directly after boot and show a greater
improvement than 5%.  However, the performance improvements become less
over time if the AIM7 runs are repeated and settle down at around 5%.

Links to earlier discussions:
http://marc.theaimsgroup.com/?t=111094594500003&r=1&w=2
http://marc.theaimsgroup.com/?t=111603406600002&r=1&w=2

Changelog V4-V5:
- alloc_arraycache and alloc_aliencache take node parameter instead of cpu
- fix initialization so that nodes without cpus are properly handled.
- simplify code in kmem_cache_init
- patch against Andrews temp mm3 release
- Add Shai to credits
- fallback to __cache_alloc from __cache_alloc_node if the node's cache
  is not available yet.

Changelog V3-V4:
- Patch against 2.6.12-rc5-mm1
- Cleanup patch integrated
- More and better use of for_each_node and for_each_cpu
- GCC 2.95 fix (do not use [] use [0])
- Correct determination of INDEX_AC
- Remove hack to cause an error on platforms that have no CONFIG_NUMA but nodes.
- Remove list3_data and list3_data_ptr macros for better readability

Changelog V2-V3:
- Made to patch against 2.6.12-rc4-mm1
- Revised bootstrap mechanism so that larger size kmem_list3 structs can be
  supported. Do a generic solution so that the right slab can be found
  for the internal structs.
- use for_each_online_node

Changelog V1-V2:
- Batching for freeing of wrong-node objects (alien caches)
- Locking changes and NUMA #ifdefs as requested by Manfred

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
Stephen Smalley
570bc1c2e5 [PATCH] tmpfs: Enable atomic inode security labeling
This patch modifies tmpfs to call the inode_init_security LSM hook to set
up the incore inode security state for new inodes before the inode becomes
accessible via the dcache.

As there is no underlying storage of security xattrs in this case, it is
not necessary for the hook to return the (name, value, len) triple to the
tmpfs code, so this patch also modifies the SELinux hook function to
correctly handle the case where the (name, value, len) pointers are NULL.

The hook call is needed in tmpfs in order to support proper security
labeling of tmpfs inodes (e.g.  for udev with tmpfs /dev in Fedora).  With
this change in place, we should then be able to remove the
security_inode_post_create/mkdir/...  hooks safely.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:28 -07:00
Mark Fasheh
fef266580e [PATCH] update filesystems for new delete_inode behavior
Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages().  One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior.  I'm guessing that some of those could probably be optimized.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:27 -07:00
Andi Kleen
d42c69972b [PATCH] PCI: Run PCI driver initialization on local node
Run PCI driver initialization on local node

Instead of adding messy kmalloc_node()s everywhere run the
PCI driver probe on the node local to the device.

This would not have helped for IDE, but should for
other more clean drivers that do more initialization in probe().
It won't help for drivers that do most of the work
on first open (like many network drivers)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
Pekka J Enberg
dd3927105b [PATCH] introduce and use kzalloc
This patch introduces a kzalloc wrapper and converts kernel/ to use it.  It
saves a little program text.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:45 -07:00
Paul Jackson
ef08e3b498 [PATCH] cpusets: confine oom_killer to mem_exclusive cpuset
Now the real motivation for this cpuset mem_exclusive patch series seems
trivial.

This patch keeps a task in or under one mem_exclusive cpuset from provoking an
oom kill of a task under a non-overlapping mem_exclusive cpuset.  Since only
interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive
containment, there is little to gain from oom killing a task under a
non-overlapping mem_exclusive cpuset, as almost all kernel and user memory
allocation must come from disjoint memory nodes.

This patch enables configuring a system so that a runaway job under one
mem_exclusive cpuset cannot cause the killing of a job in another such cpuset
that might be using very high compute and memory resources for a prolonged
time.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
Paul Jackson
9bf2229f88 [PATCH] cpusets: formalize intermediate GFP_KERNEL containment
This patch makes use of the previously underutilized cpuset flag
'mem_exclusive' to provide what amounts to another layer of memory placement
resolution.  With this patch, there are now the following four layers of
memory placement available:

 1) The whole system (interrupt and GFP_ATOMIC allocations can use this),
 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use),
 3) The current tasks cpuset (GFP_USER allocations constrained to here), and
 4) Specific node placement, using mbind and set_mempolicy.

These nest - each layer is a subset (same or within) of the previous.

Layer (2) above is new, with this patch.  The call used to check whether a
zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is
extended to take a gfp_mask argument, and its logic is extended, in the case
that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset
hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if
placement is allowed.  The definition of GFP_USER, which used to be identical
to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous
cpuset_gfp_hardwall_flag patch.

GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks
cpuset, so long as any node therein is not too tight on memory, but will
escape to the larger layer, if need be.

The intended use is to allow something like a batch manager to handle several
jobs, each job in its own cpuset, but using common kernel memory for caches
and such.  Swapper and oom_kill activity is also constrained to Layer (2).  A
task in or below one mem_exclusive cpuset should not cause swapping on nodes
in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a
task in another such cpuset.  Heavy use of kernel memory for i/o caching and
such by one job should not impact the memory available to jobs in other
non-overlapping mem_exclusive cpusets.

This patch enables providing hardwall, inescapable cpusets for memory
allocations of each job, while sharing kernel memory allocations between
several jobs, in an enclosing mem_exclusive cpuset.

Like Dinakar's patch earlier to enable administering sched domains using the
cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag
that had previously done nothing much useful other than restrict what cpuset
configurations were allowed.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
Paul Jackson
a49335ccea [PATCH] cpusets: oom_kill tweaks
This patch series extends the use of the cpuset attribute 'mem_exclusive'
to support cpuset configurations that:
 1) allow GFP_KERNEL allocations to come from a potentially larger
    set of memory nodes than GFP_USER allocations, and
 2) can constrain the oom killer to tasks running in cpusets in
    a specified subtree of the cpuset hierarchy.

Here's an example usage scenario.  For a few hours or more, a large NUMA
system at a University is to be divided in two halves, with a bunch of student
jobs running in half the system under some form of batch manager, and with a
big research project running in the other half.  Each of the student jobs is
placed in a small cpuset, but should share the classic Unix time share
facilities, such as buffered pages of files in /bin and /usr/lib.  The big
research project wants no interference whatsoever from the student jobs, and
has highly tuned, unusual memory and i/o patterns that intend to make full use
of all the main memory on the nodes available to it.

In this example, we have two big sibling cpusets, one of which is further
divided into a more dynamic set of child cpusets.

We want kernel memory allocations constrained by the two big cpusets, and user
allocations constrained by the smaller child cpusets where present.  And we
require that the oom killer not operate across the two halves of this system,
or else the first time a student job runs amuck, the big research project will
likely be first inline to get shot.

Tweaking /proc/<pid>/oom_adj is not ideal -- if the big research project
really does run amuck allocating memory, it should be shot, not some other
task outside the research projects mem_exclusive cpuset.

I propose to extend the use of the 'mem_exclusive' flag of cpusets to manage
such scenarios.  Let memory allocations for user space (GFP_USER) be
constrained by a tasks current cpuset, but memory allocations for kernel space
(GFP_KERNEL) by constrained by the nearest mem_exclusive ancestor of the
current cpuset, even though kernel space allocations will still _prefer_ to
remain within the current tasks cpuset, if memory is easily available.

Let the oom killer be constrained to consider only tasks that are in
overlapping mem_exclusive cpusets (it won't help much to kill a task that
normally cannot allocate memory on any of the same nodes as the ones on which
the current task can allocate.)

The current constraints imposed on setting mem_exclusive are unchanged.  A
cpuset may only be mem_exclusive if its parent is also mem_exclusive, and a
mem_exclusive cpuset may not overlap any of its siblings memory nodes.

This patch was presented on linux-mm in early July 2005, though did not
generate much feedback at that time.  It has been built for a variety of
arch's using cross tools, and built, booted and tested for function on SN2
(ia64).

There are 4 patches in this set:
  1) Some minor cleanup, and some improvements to the code layout
     of one routine to make subsequent patches cleaner.
  2) Add another GFP flag - __GFP_HARDWALL.  It marks memory
     requests for USER space, which are tightly confined by the
     current tasks cpuset.
  3) Now memory requests (such as KERNEL) that not marked HARDWALL can
     if short on memory, look in the potentially larger pool of memory
     defined by the nearest mem_exclusive ancestor cpuset of the current
     tasks cpuset.
  4) Finally, modify the oom killer to skip any task whose mem_exclusive
     cpuset doesn't overlap ours.

Patch (1), the one time I looked on an SN2 (ia64) build, actually saved 32
bytes of kernel text space.  Patch (2) has no affect on the size of kernel
text space (it just adds a preprocessor flag).  Patches (3) and (4) added
about 600 bytes each of kernel text space, mostly in kernel/cpuset.c, which
matters only if CONFIG_CPUSET is enabled.

This patch:

This patch applies a few comment and code cleanups to mm/oom_kill.c prior to
applying a few small patches to improve cpuset management of memory placement.

The comment changed in oom_kill.c was seriously misleading.  The code layout
change in select_bad_process() makes room for adding another condition on
which a process can be spared the oom killer (see the subsequent
cpuset_nodes_overlap patch for this addition).

Also a couple typos and spellos that bugged me, while I was here.

This patch should have no material affect.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:39 -07:00
Ravikiran G Thirumalai
6c231b7bab [PATCH] Additions to .data.read_mostly section
Mark variables which are usually accessed for reads with __readmostly.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:33 -07:00
Steven Pratt
3b30bbd963 [PATCH] readahead: reset cache_hit earlier
We don't reset the cache hit count until after readahead does a successful
readahead.  This seems to leave a corner case open where we miss in cache,
but don't restart the readhead right away.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:25 -07:00
Christoph Hellwig
cdb3826b99 [PATCH] remove misleading comment above sys_brk
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:23 -07:00
Christoph Lameter
c3d8c14145 [PATCH] More __read_mostly variables
Move some more frequently read variables that showed up during some of our
performance tests as sometimes ending up in hot cachelines to the
read_mostly section.

Fix: Move the __read_mostly from before hpet_usec_quotient to follow the
variable like the other uses of __read_mostly.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Christoph Lameter <christoph@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:18 -07:00
Stephen Smalley
f549d6c18c [PATCH] Generic VFS fallback for security xattrs
This patch modifies the VFS setxattr, getxattr, and listxattr code to fall
back to the security module for security xattrs if the filesystem does not
support xattrs natively.  This allows security modules to export the incore
inode security label information to userspace even if the filesystem does
not provide xattr storage, and eliminates the need to individually patch
various pseudo filesystem types to provide such access.  The patch removes
the existing xattr code from devpts and tmpfs as it is then no longer
needed.

The patch restructures the code flow slightly to reduce duplication between
the normal path and the fallback path, but this should only have one
user-visible side effect - a program may get -EACCES rather than
-EOPNOTSUPP if policy denied access but the filesystem didn't support the
operation anyway.  Note that the post_setxattr hook call is not needed in
the fallback case, as the inode_setsecurity hook call handles the incore
inode security state update directly.  In contrast, we do call fsnotify in
both cases.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:52 -07:00
Martin Hicks
c07e02db76 [PATCH] VM: add page_state info to per-node meminfo
Add page_state info to the per-node meminfo file in sysfs.  This is mostly
just for informational purposes.

The lack of this information was brought up recently during a discussion
regarding pagecache clearing, and I put this patch together to test out one
of the suggestions.

It seems like interesting info to have, so I'm submitting the patch.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:49 -07:00
Manfred Spraul
00e145b6d5 [PATCH] slab: removes local_irq_save()/local_irq_restore() pair
Proposed by and based on a patch from Eric Dumazet <dada1@cosmosbay.com>:
This patch removes unnecessary critical section in ksize() function, as
cli/sti are rather expensive on modern CPUS.

It additionally adds a docbook entry for ksize() and further simplifies the
code.

Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:49 -07:00
Eric Dumazet
34342e863c [PATCH] mm/slab.c: prefetchw the start of new allocated objects
Mostobjects returned by __cache_alloc() will be written by the caller,
(but not all callers want to write all the object, but just at the
begining) prefetchw() tells the modern CPU to think about the future
writes, ie start some memory transactions in advance.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:48 -07:00
Zachary Amsden
a600388d28 [PATCH] x86: ptep_clear optimization
Add a new accessor for PTEs, which passes the full hint from the mmu_gather
struct; this allows architectures with hardware pagetables to optimize away
atomic PTE operations when destroying an address space.  Removing the
locked operation should allow better pipelining of memory access in this
loop.  I measured an average savings of 30-35 cycles per zap_pte_range on
the first 500 destructions on Pentium-M, but I believe the optimization
would win more on older processors which still assert the bus lock on xchg
for an exclusive cacheline.

Update: I made some new measurements, and this saves exactly 26 cycles over
ptep_get_and_clear on Pentium M.  On P4, with a PAE kernel, this saves 180
cycles per ptep_get_and_clear, for a whopping 92160 cycles savings for a
full address space destruction.

pte_clear_full is not yet used, but is provided for future optimizations
(in particular, when running inside of a hypervisor that queues page table
updates, the full hint allows us to avoid queueing unnecessary page table
update for an address space in the process of being destroyed.

This is not a huge win, but it does help a bit, and sets the stage for
further hypervisor optimization of the mm layer on all architectures.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Christoph Lameter <christoph@lameter.com>
Cc: <linux-mm@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:48 -07:00
Kyle Moffett
fa5b08d5f8 [PATCH] sab: consolidate kmem_bufctl_t
This is used only in slab.c and each architecture gets to define whcih
underlying type is to be used.

Seems a bit silly - move it to slab.c and use the same type for all
architectures: unsigned int.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:48 -07:00
Adam Litke
7bf07f3d4b [PATCH] hugetlb: move stale pte check into huge_pte_alloc()
Initial Post (Wed, 17 Aug 2005)

This patch moves the
	if (! pte_none(*pte))
		hugetlb_clean_stale_pgtable(pte);
logic into huge_pte_alloc() so all of its callers can be immune to the bug
described by Kenneth Chen at http://lkml.org/lkml/2004/6/16/246

> It turns out there is a bug in hugetlb_prefault(): with 3 level page table,
> huge_pte_alloc() might return a pmd that points to a PTE page. It happens
> if the virtual address for hugetlb mmap is recycled from previously used
> normal page mmap. free_pgtables() might not scrub the pmd entry on
> munmap and hugetlb_prefault skips on any pmd presence regardless what type
> it is.

Unless I am missing something, it seems more correct to place the check inside
huge_pte_alloc() to prevent a the same bug wherever a huge pte is allocated.
It also allows checking for this condition when lazily faulting huge pages
later in the series.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: <linux-mm@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:46 -07:00
Deepak Saxena
fd195c49fb [PATCH] arm: allow for arch-specific IOREMAP_MAX_ORDER
Version 6 of the ARM architecture introduces the concept of 16MB pages
(supersections) and 36-bit (40-bit actually, but nobody uses this) physical
addresses.  36-bit addressed memory and I/O and ARMv6 can only be mapped
using supersections and the requirement on these is that both virtual and
physical addresses be 16MB aligned.  In trying to add support for ioremap()
of 36-bit I/O, we run into the issue that get_vm_area() allows for a
maximum of 512K alignment via the IOREMAP_MAX_ORDER constant.  To work
around this, we can:

- Allocate a larger VM area than needed (size + (1ul << IOREMAP_MAX_ORDER))
  and then align the pointer ourselves, but this ends up with 512K of
  wasted VM per ioremap().

- Provide a new __get_vm_area_aligned() API and make __get_vm_area() sit
  on top of this. I did this and it works but I don't like the idea
  adding another VM API just for this one case.

- My preferred solution which is to allow the architecture to override
  the IOREMAP_MAX_ORDER constant with it's own version.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:46 -07:00
Paolo 'Blaisorblade' Giarrusso
4944e76d81 [PATCH] mm: remove implied vm_ops check
If !vma->vm-ops we already BUG above, so retesting it is useless.  The
compiler cannot optimize this because BUG is a macro and is not thus marked
noreturn; that should possibly be fixed.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:45 -07:00
Paolo 'Blaisorblade' Giarrusso
d44ed4f868 [PATCH] shmem_populate: avoid an useless check, and some comments
Either shmem_getpage returns a failure, or it found a page, or it was told
it couldn't do any I/O.  So it's useless to check nonblock in the else
branch.  We could add a BUG() there but I preferred to comment the
offending function.

This was taken out from one Ingo Molnar's old patch I'm resurrecting.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:45 -07:00
Martin Hicks
0abf40c1ac [PATCH] vm: slab.c spelling correction
Fix a small spelling mistake.  subtile->subtle

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:45 -07:00
Hugh Dickins
836d5ffd34 [PATCH] mm: fix madvise vma merging
Better late than never, I've at last reviewed the madvise vma merging
going into 2.6.13.  Remove a pointless check and fix two little bugs -
a simple test (with /proc/<pid>/maps hacked to show ReadHints) showed
both mismerges in practice: though being madvise, neither was disastrous.

1. Correct placement of the success label in madvise_behavior: as in
   mprotect_fixup and mlock_fixup, it is necessary to update vm_flags
   when vma_merge succeeds (to handle the exceptional Case 8 noted in
   the comments above vma_merge itself).

2. Correct initial value of prev when starting part way into a vma: as
   in sys_mprotect and do_mlock, it needs to be set to vma in this case
   (vma_merge handles only that minimum of cases shown in its comments).

3. If find_vma_prev sets prev, then the vma it returns is prev->vm_next,
   so it's pointless to make that same assignment again in sys_madvise.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:44 -07:00
Martin Hicks
53e9a6159f [PATCH] VM: zone reclaim atomic ops cleanup
Christoph Lameter and Marcelo Tosatti asked to get rid of the
atomic_inc_and_test() to cleanup the atomic ops in the zone reclaim code.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:44 -07:00
Martin Hicks
bce5f6ba34 [PATCH] VM: add capabilites check to set_zone_reclaim
Add a capability check to sys_set_zone_reclaim().  This syscall is not
something that should be available to a user.

Signed-off-by:  Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:44 -07:00
Nick Piggin
242e546862 [PATCH] mm: remove atomic
This bitop does not need to be atomic because it is performed when there will
be no references to the page (ie.  the page is being freed).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:44 -07:00
Nick Piggin
9a61c349b2 [PATCH] mm: remap ZERO_PAGE mappings
filemap_xip's nopage routine maps the ZERO_PAGE into readonly mappings, if it
has no data page to map there: then if the hole in the file is later filled,
__xip_unmap uses an rmap technique to replace the ZERO_PAGEs mapped for that
offset by the newly allocated file page, so that established mappings will see
the newly written data.

However, on MIPS (alone) there's not one but as many as eight ZERO_PAGEs,
chosen for coloring by user virtual address; and if mremap has meanwhile been
used to move a mapping containing a ZERO_PAGE, it will generally not match the
ZERO_PAGE(address) __xip_unmap is looking for.

To maintain XIP's established mappings correctly on MIPS, we need Nick's fix
to mremap's move_one_page (originally presented as an optimization), to
replace the ZERO_PAGE appropriate to the old address by the ZERO_PAGE
appropriate to the new address.

(But when I first saw this, I was thinking the ZERO_PAGEs themselves would get
corrupted, very bad.  Now I think it's the other way round, that the
established mappings will fail to see the newly written data: incorrect, but
not corrupting everything else.  Whether filemap_xip's technique is generally
safe, I'd hesitate to say in a hurry: it's interesting, but we've never tried
to do that in tmpfs.)

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:44 -07:00
Nick Piggin
4d7670e0f6 [PATCH] mm: cleanup rmap
Thanks to Bill Irwin for pointing this out.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Nick Piggin
2822c1aa57 [PATCH] mm: micro-optimise rmap
Microoptimise page_add_anon_rmap.  Although these expressions are used only in
the taken branch of the if() statement, the compiler can't reorder them inside
because atomic_inc_and_test is a barrier.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Nick Piggin
c3dce2d89c [PATCH] mm: comment rmap
Just be clear that VM_RESERVED pages here are a bug, and the test is not there
because they are expected.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Christoph Lameter
6e21c8f145 [PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside
This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2

I inherited a large code base from Ray for page migration.  There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process.  I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process.  numa_maps is indexes by the start address
found in /proc/<pid>/maps.  F.e.  with this patch you can see the page use
of the "getty" process:

margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516                /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516                /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923            /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467           /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399           /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399           /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0          [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0          [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0                  [vdso]

cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1

getty uses ld.so.  The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.

The second vma is the process specific data portion for ld.so.  This is
only one page.

The display format is:

<startaddress>	 Links to information in /proc/<pid>/map
<memory policy>  This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef=		<maximum reference to a page in this vma>
Pages=		<Nr of pages in use>
Mapped=		<Nr of pages with mapcount >
Anon=		<nr of anonymous pages>
Nx=		<Nr of pages on Node x>

The content of the proc-file is self-evident.  If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Hugh Dickins
839b9685e8 [PATCH] rmap: don't test rss
Remove the three get_mm_counter(mm, rss) tests from rmap.c: there was a
time when testing rss was important to avoid a particular race between
dup_mmap and the anonmm rmap; but now it's just a rather silly pseudo-
optimization, made even more obscure by the get_mm_counter macro.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:42 -07:00
Hugh Dickins
3279ffd97f [PATCH] delete from_swap_cache BUG_ONs
Three of the four BUG_ONs in delete_from_swap_cache are immediately
repeated in __delete_from_swap_cache: delete those and add the one.  But
perhaps mm/ is altogether overprovisioned with historic BUGs?

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:42 -07:00
Hugh Dickins
5d337b9194 [PATCH] swap: swap_lock replace list+device
The idea of a swap_device_lock per device, and a swap_list_lock over them all,
is appealing; but in practice almost every holder of swap_device_lock must
already hold swap_list_lock, which defeats the purpose of the split.

The only exceptions have been swap_duplicate, valid_swaphandles and an
untrodden path in try_to_unuse (plus a few places added in this series).
valid_swaphandles doesn't show up high in profiles, but swap_duplicate does
demand attention.  However, with the hold time in get_swap_pages so much
reduced, I've not yet found a load and set of swap device priorities to show
even swap_duplicate benefitting from the split.  Certainly the split is mere
overhead in the common case of a single swap device.

So, replace swap_list_lock and swap_device_lock by spinlock_t swap_lock
(generally we seem to prefer an _ in the name, and not hide in a macro).

If someone can show a regression in swap_duplicate, then probably we should
add a hashlock for the swap_map entries alone (shorts being anatomic), so as
to help the case of the single swap device too.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:42 -07:00
Hugh Dickins
048c27fd72 [PATCH] swap: scan_swap_map latency breaks
The get_swap_page/scan_swap_map latency can be so bad that even those without
preemption configured deserve relief: periodically cond_resched.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:41 -07:00
Hugh Dickins
52b7efdbe5 [PATCH] swap: scan_swap_map drop swap_device_lock
get_swap_page has often shown up on latency traces, doing lengthy scans while
holding two spinlocks.  swap_list_lock is already dropped, now scan_swap_map
drop swap_device_lock before scanning the swap_map.

While scanning for an empty cluster, don't worry that racing tasks may
allocate what was free and free what was allocated; but when allocating an
entry, check it's still free after retaking the lock.  Avoid dropping the lock
in the expected common path.  No barriers beyond the locks, just let the
cookie crumble; highest_bit limit is volatile, but benign.

Guard against swapoff: must check SWP_WRITEOK before allocating, must raise
SWP_SCANNING reference count while in scan_swap_map, swapoff wait for that to
fall - just use schedule_timeout, we don't want to burden scan_swap_map
itself, and it's very unlikely that anyone can really still be in
scan_swap_map once swapoff gets this far.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:41 -07:00
Hugh Dickins
7dfad4183b [PATCH] swap: scan_swap_map restyled
Rewrite scan_swap_map to allocate in just the same way as before (taking the
next free entry SWAPFILE_CLUSTER-1 times, then restarting at the lowest wholly
empty cluster, falling back to lowest entry if none), but with a view towards
dropping the lock in the next patch.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:41 -07:00