Commit Graph

28 Commits

Author SHA1 Message Date
Michael Chan
3248e16820 cnic: Use dma_alloc_coherent().
Replace pci_alloc_consistent() with dma_alloc_coherent() so that
appropriate GFP flags can be used.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:22 -08:00
Michael Chan
15971c3ce3 cnic: Fix rq_page_table DMA address.
The old code mistakenly zeroed out the upper 32-bit of the DMA address.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:21 -08:00
Michael Chan
dd2e4dbce3 cnic: Fix bogus iSCSI MAC address
Fix code to read the proper iSCSI MAC address for bnx2x devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:20 -08:00
Michael Chan
8b065b671d cnic: Fix bnx2x ring shutdown.
Need to send a HALT command to the firmware to fully shutdown the bnx2x
rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:20 -08:00
Michael Chan
c7596b79fe cnic: Fix ring I/O address for bnx2x devices.
Old code was initializing the ring producers using an incorrect I/O
address.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02 19:57:19 -08:00
Joe Perches
164165dad7 drivers/net: tasklet_init - Remove unnecessary leading & from second arg
Changed function pointer use from non-majority address-of style
to majority short form without & via: (was: 8 with &, 36 without)

grep -rPl "\btasklet_init\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \
	perl -i -e 'local $/; while (<>) { s@(\btasklet_init\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\
done

Compile tested allyesconfig x86

Signed-off-by: Joe Perches <joe@perches.com>

 drivers/net/cnic.c |    4 ++--
 drivers/net/jme.c  |   10 +++++-----
 drivers/net/skge.c |    2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-19 12:29:30 -08:00
roel kluin
0d37f36ff9 cnic: ensure ulp_type is not negative
`ulp_type' is signed, make sure it is not negative
when we read the array element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:23 -08:00
David S. Miller
0519d83d83 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-10-29 21:28:59 -07:00
Michael Chan
d0549382da cnic: Fix L2CTX_STATUSB_NUM offset in context memory.
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match
the recent firmware update:

commit 078b073588
bnx2: Update firmware to 5.0.0.j3.

Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when
iSCSI is enabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28 03:41:59 -07:00
David S. Miller
c05e85a06e cnic: Need to include net/ip6_checksum.h
drivers/net/cnic.c: In function 'cnic_init_storm_conn_bufs':
drivers/net/cnic.c:1757: error: implicit declaration of function 'csum_ipv6_magic'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:18:35 -07:00
Michael Chan
71034ba845 cnic: Add main functions to support bnx2x devices.
Add iSCSI support for bnx2x devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Shmulik Ravid - Rabinovitz <shmulikr@broadcom.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11 23:30:18 -07:00
Michael Chan
e251306556 cnic: Add bnx2x data structures.
Add hardware and software structures for bnx2x devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11 23:30:16 -07:00
Michael Chan
86b53606eb cnic: Refactor some code.
Refactor ring init. code for subsequent 10G patches.  Also add rtnl_lock()
in cnic_uio_open() to prevent race condition with netdev events.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-11 23:30:15 -07:00
Michael Chan
6053bbf7bb cnic: Fix NETDEV_UP event processing.
This fixes the problem of not handling the NETDEV_UP event properly
during hot-plug or modprobe of bnx2 after cnic.  The handling was
skipped by mistakenly using "else if" to check for the event.

Also update version to 2.0.1.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02 11:03:28 -07:00
Michael Chan
6ef57a0ea7 cnic: Shutdown iSCSI ring during uio_close.
The iSCSI ring should be shutdown during uio_close instead of uio_open
for proper operations.  This fixes the problem of the ring getting
stuck intermittently.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22 14:47:21 -07:00
David S. Miller
6cdee2f96a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/yellowfin.c
2009-09-02 00:32:56 -07:00
Michael Chan
5e9b2dbfcb cnic: Put uio init in separate function.
This will allow the 10G iSCSI code to reuse the function.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:47:12 -07:00
Michael Chan
ec0248ea35 cnic: Put rx/tx ring allocation in separate function.
This will allow the 10G iSCSI code to reuse the function.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:47:10 -07:00
Michael Chan
7fc1ece407 cnic: Fix locking in init/exit calls.
The slow path ulp_init and ulp_exit calls to the bnx2i driver
are sleepable calls and therefore should not be protected using
rcu_read_lock.  Fix it by using mutex and refcount during these
calls.  cnic_unregister_driver() will now wait for the refcount
to go to zero before completing the call.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:50:47 -07:00
Michael Chan
681dbd7107 cnic: Fix locking in start/stop calls.
The slow path ulp_start and ulp_stop calls to the bnx2i driver
are sleepable calls and therefore should not be protected using
rcu_read_lock.  Fix it by using mutex and setting a bit during
these calls.  cnic_unregister_device() will now wait for the bit
to clear before completing the call.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:50:44 -07:00
Michael Chan
a3059b12ad cnic: Refine registration with bnx2.
Register and unregister with bnx2 during NETDEV_UP and NETDEV_DOWN
events.  This simplifies the sequence of events and allows locking
fixes in the next patch.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:50:43 -07:00
Michael Chan
64c6460875 cnic: Fix symbol_put_addr() panic on ia64.
When the cnic driver tries to grab a symbol from bnx2 when bnx2 is
running init code, symbol_get() will succeed but symbol_put_addr()
will hit BUG() a moment later.  module_text_address() fails because
bnx2 is still in init code.

This is fixed by using symbol_put() instead which does the exact
opposite of symbol_get().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:50:42 -07:00
Michael Chan
6d7760a88c cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
When a net device goes down or when the bnx2i driver is unloaded,
the code was not generating the ISCSI_KEVENT_IF_DOWN message
properly and this could cause the userspace driver to crash.

This is fixed by sending the message properly in the shutdown path.
cnic_uio_stop() is also added to send the message when bnx2i is
unregistering.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27 11:25:58 -07:00
Michael Chan
e2ee3616bc cnic: Fix __symbol_get() build error.
Ingo molnar <mingo@elte.hu> reported the error

drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’

when CONFIG_MODULES is not defined.  Fix by using symbol_get() instead.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:00:33 -05:00
James Bottomley
7cbdca23c8 Revert "[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’"
This reverts commit bc3bf8fd33.

All the commit did was add a second #include of <linux/module.h> which is
the wrong fix.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 10:58:46 -05:00
Ingo Molnar
bc3bf8fd33 [SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’
drivers/net/cnic.c: In function ‘init_bnx2_cnic’:
 drivers/net/cnic.c:2520: error: implicit declaration of function ‘__symbol_get’
 drivers/net/cnic.c:2520: warning: assignment makes pointer from integer without a cast
 make[1]: *** [drivers/net/cnic.o] Error 1
 make: *** [drivers/net/cnic.o] Error 2

Caused by not including linux/module.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-13 09:07:51 -05:00
Randy Dunlap
faea56c9bb [SCSI] cnic: fix undefined reference to `ip6_route_output'
Fix cnic build for case of CONFIG_INET=n.
Fix cnic build for case of CONFIG_IPV6=m and CONFIG_CNIC=y.

Fixes these build errors:

cnic.c:(.text+0x236a1d): undefined reference to `ip_route_output_key'
cnic.c:(.text+0x15a8e8): undefined reference to `ip6_route_output'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-13 09:06:10 -05:00
Michael Chan
a463696039 [SCSI] cnic: Add new Broadcom CNIC driver.
The CNIC driver controls BNX2 hardware rings and resources used by
iSCSI.  Most hardware resources for iSCSI are separate from those
used for ethernet networking.

iSCSI uses a separate MAC address and IP address.  The CNIC driver
creates a UIO interface to handle the non-offloaded packets such as
ARP, etc in userspace.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09 10:22:42 -05:00