Commit Graph

28 Commits

Author SHA1 Message Date
Fengguang Wu
f9acc8c7b3 readahead: sanify file_ra_state names
Rename some file_ra_state variables and remove some accessors.

It results in much simpler code.
Kudos to Rusty!

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Rusty Russell
cf914a7d65 readahead: split ondemand readahead interface into two functions
Split ondemand readahead interface into two functions.  I think this makes it
a little clearer for non-readahead experts (like Rusty).

Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
fe3cba17c4 mm: share PG_readahead and PG_reclaim
Share the same page flag bit for PG_readahead and PG_reclaim.

One is used only on file reads, another is only for emergency writes.  One
is used mostly for fresh/young pages, another is for old pages.

Combinations of possible interactions are:

a) clear PG_reclaim => implicit clear of PG_readahead
	it will delay an asynchronous readahead into a synchronous one
	it actually does _good_ for readahead:
		the pages will be reclaimed soon, it's readahead thrashing!
		in this case, synchronous readahead makes more sense.

b) clear PG_readahead => implicit clear of PG_reclaim
	one(and only one) page will not be reclaimed in time
	it can be avoided by checking PageWriteback(page) in readahead first

c) set PG_reclaim => implicit set of PG_readahead
	will confuse readahead and make it restart the size rampup process
	it's a trivial problem, and can mostly be avoided by checking
	PageWriteback(page) first in readahead

d) set PG_readahead => implicit set of PG_reclaim
	PG_readahead will never be set on already cached pages.
	PG_reclaim will always be cleared on dirtying a page.
	so not a problem.

In summary,
	a)   we get better behavior
	b,d) possible interactions can be avoided
	c)   racy condition exists that might affect readahead, but the chance
	     is _really_ low, and the hurt on readahead is trivial.

Compound pages also use PG_reclaim, but for now they do not interact with
reclaim/readahead code.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
c743d96b6d readahead: remove the old algorithm
Remove the old readahead algorithm.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
122a21d11c readahead: on-demand readahead logic
This is a minimal readahead algorithm that aims to replace the current one.
It is more flexible and reliable, while maintaining almost the same behavior
and performance.  Also it is full integrated with adaptive readahead.

It is designed to be called on demand:
	- on a missing page, to do synchronous readahead
	- on a lookahead page, to do asynchronous readahead

In this way it eliminated the awkward workarounds for cache hit/miss,
readahead thrashing, retried read, and unaligned read.  It also adopts the
data structure introduced by adaptive readahead, parameterizes readahead
pipelining with `lookahead_index', and reduces the current/ahead windows to
one single window.

HEURISTICS

The logic deals with four cases:

	- sequential-next
		found a consistent readahead window, so push it forward

	- random
		standalone small read, so read as is

	- sequential-first
		create a new readahead window for a sequential/oversize request

	- lookahead-clueless
		hit a lookahead page not associated with the readahead window,
		so create a new readahead window and ramp it up

In each case, three parameters are determined:

	- readahead index: where the next readahead begins
	- readahead size:  how much to readahead
	- lookahead size:  when to do the next readahead (for pipelining)

BEHAVIORS

The old behaviors are maximally preserved for trivial sequential/random reads.
Notable changes are:

	- It no longer imposes strict sequential checks.
	  It might help some interleaved cases, and clustered random reads.
	  It does introduce risks of a random lookahead hit triggering an
	  unexpected readahead. But in general it is more likely to do good
	  than to do evil.

	- Interleaved reads are supported in a minimal way.
	  Their chances of being detected and proper handled are still low.

	- Readahead thrashings are better handled.
	  The current readahead leads to tiny average I/O sizes, because it
	  never turn back for the thrashed pages.  They have to be fault in
	  by do_generic_mapping_read() one by one.  Whereas the on-demand
	  readahead will redo readahead for them.

OVERHEADS

The new code reduced the overheads of

	- excessively calling the readahead routine on small sized reads
	  (the current readahead code insists on seeing all requests)

	- doing a lot of pointless page-cache lookups for small cached files
	  (the current readahead only turns itself off after 256 cache hits,
	  unfortunately most files are < 1MB, so never see that chance)

That accounts for speedup of
	- 0.3% on 1-page sequential reads on sparse file
	- 1.2% on 1-page cache hot sequential reads
	- 3.2% on 256-page cache hot sequential reads
	- 1.3% on cache hot `tar /lib`

However, it does introduce one extra page-cache lookup per cache miss, which
impacts random reads slightly. That's 1% overheads for 1-page random reads on
sparse file.

PERFORMANCE

The basic benchmark setup is
	- 2.6.20 kernel with on-demand readahead
	- 1MB max readahead size
	- 2.9GHz Intel Core 2 CPU
	- 2GB memory
	- 160G/8M Hitachi SATA II 7200 RPM disk

The benchmarks show that
	- it maintains the same performance for trivial sequential/random reads
	- sysbench/OLTP performance on MySQL gains up to 8%
	- performance on readahead thrashing gains up to 3 times

iozone throughput (KB/s): roughly the same
==========================================
iozone -c -t1 -s 4096m -r 64k

			       2.6.20          on-demand      gain
first run
	  "  Initial write "   61437.27        64521.53      +5.0%
	  "        Rewrite "   47893.02        48335.20      +0.9%
	  "           Read "   62111.84        62141.49      +0.0%
	  "        Re-read "   62242.66        62193.17      -0.1%
	  "   Reverse Read "   50031.46        49989.79      -0.1%
	  "    Stride read "    8657.61         8652.81      -0.1%
	  "    Random read "   13914.28        13898.23      -0.1%
	  " Mixed workload "   19069.27        19033.32      -0.2%
	  "   Random write "   14849.80        14104.38      -5.0%
	  "         Pwrite "   62955.30        65701.57      +4.4%
	  "          Pread "   62209.99        62256.26      +0.1%

second run
	  "  Initial write "   60810.31        66258.69      +9.0%
	  "        Rewrite "   49373.89        57833.66     +17.1%
	  "           Read "   62059.39        62251.28      +0.3%
	  "        Re-read "   62264.32        62256.82      -0.0%
	  "   Reverse Read "   49970.96        50565.72      +1.2%
	  "    Stride read "    8654.81         8638.45      -0.2%
	  "    Random read "   13901.44        13949.91      +0.3%
	  " Mixed workload "   19041.32        19092.04      +0.3%
	  "   Random write "   14019.99        14161.72      +1.0%
	  "         Pwrite "   64121.67        68224.17      +6.4%
	  "          Pread "   62225.08        62274.28      +0.1%

In summary, writes are unstable, reads are pretty close on average:

			  access pattern  2.6.20  on-demand   gain
				   Read  62085.61  62196.38  +0.2%
				Re-read  62253.49  62224.99  -0.0%
			   Reverse Read  50001.21  50277.75  +0.6%
			    Stride read   8656.21   8645.63  -0.1%
			    Random read  13907.86  13924.07  +0.1%
	 		 Mixed workload  19055.29  19062.68  +0.0%
				  Pread  62217.53  62265.27  +0.1%

aio-stress: roughly the same
============================
aio-stress -l -s4096 -r128 -t1 -o1 knoppix511-dvd-cn.iso
aio-stress -l -s4096 -r128 -t1 -o3 knoppix511-dvd-cn.iso

					2.6.20      on-demand  delta
			sequential	 92.57s      92.54s    -0.0%
			random		311.87s     312.15s    +0.1%

sysbench fileio: roughly the same
=================================
sysbench --test=fileio --file-io-mode=async --file-test-mode=rndrw \
	 --file-total-size=4G --file-block-size=64K \
	 --num-threads=001 --max-requests=10000 --max-time=900 run

				threads    2.6.20   on-demand    delta
		first run
				      1   59.1974s    59.2262s  +0.0%
				      2   58.0575s    58.2269s  +0.3%
				      4   48.0545s    47.1164s  -2.0%
				      8   41.0684s    41.2229s  +0.4%
				     16   35.8817s    36.4448s  +1.6%
				     32   32.6614s    32.8240s  +0.5%
				     64   23.7601s    24.1481s  +1.6%
				    128   24.3719s    23.8225s  -2.3%
				    256   23.2366s    22.0488s  -5.1%

		second run
				      1   59.6720s    59.5671s  -0.2%
				      8   41.5158s    41.9541s  +1.1%
				     64   25.0200s    23.9634s  -4.2%
				    256   22.5491s    20.9486s  -7.1%

Note that the numbers are not very stable because of the writes.
The overall performance is close when we sum all seconds up:

                sum all up               495.046s    491.514s   -0.7%

sysbench oltp (trans/sec): up to 8% gain
========================================
sysbench --test=oltp --oltp-table-size=10000000 --oltp-read-only \
	 --mysql-socket=/var/run/mysqld/mysqld.sock \
	 --mysql-user=root --mysql-password=readahead \
	 --num-threads=064 --max-requests=10000 --max-time=900 run

	10000-transactions run
				threads    2.6.20   on-demand    gain
				      1     62.81       64.56   +2.8%
				      2     67.97       70.93   +4.4%
				      4     81.81       85.87   +5.0%
				      8     94.60       97.89   +3.5%
				     16     99.07      104.68   +5.7%
				     32     95.93      104.28   +8.7%
				     64     96.48      103.68   +7.5%
	5000-transactions run
				      1     48.21       48.65   +0.9%
				      8     68.60       70.19   +2.3%
				     64     70.57       74.72   +5.9%
	2000-transactions run
				      1     37.57       38.04   +1.3%
				      2     38.43       38.99   +1.5%
				      4     45.39       46.45   +2.3%
				      8     51.64       52.36   +1.4%
				     16     54.39       55.18   +1.5%
				     32     52.13       54.49   +4.5%
				     64     54.13       54.61   +0.9%

That's interesting results. Some investigations show that
	- MySQL is accessing the db file non-uniformly: some parts are
	  more hot than others
	- It is mostly doing 4-page random reads, and sometimes doing two
	  reads in a row, the latter one triggers a 16-page readahead.
	- The on-demand readahead leaves many lookahead pages (flagged
	  PG_readahead) there. Many of them will be hit, and trigger
	  more readahead pages. Which might save more seeks.
	- Naturally, the readahead windows tend to lie in hot areas,
	  and the lookahead pages in hot areas is more likely to be hit.
	- The more overall read density, the more possible gain.

That also explains the adaptive readahead tricks for clustered random reads.

readahead thrashing: 3 times better
===================================
We boot kernel with "mem=128m single", and start a 100KB/s stream on every
second, until reaching 200 streams.

			      max throughput     min avg I/O size
		2.6.20:            5MB/s               16KB
		on-demand:        15MB/s              140KB

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
5ce1110b92 readahead: data structure and routines
Extend struct file_ra_state to support the on-demand readahead logic.  Also
define some helpers for it.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
f615bfca46 readahead: MIN_RA_PAGES/MAX_RA_PAGES macros
Define two convenient macros for read-ahead:
	- MAX_RA_PAGES: rounded down counterpart of VM_MAX_READAHEAD
	- MIN_RA_PAGES: rounded _up_ counterpart of VM_MIN_READAHEAD

Note that the rounded up MIN_RA_PAGES will work flawlessly with _large_
page sizes like 64k.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Fengguang Wu
46fc3e7b4e readahead: add look-ahead support to __do_page_cache_readahead()
Add look-ahead support to __do_page_cache_readahead().

It works by
	- mark the Nth backwards page with PG_readahead,
	(which instructs the page's first reader to invoke readahead)
	- and only do the marking for newly allocated pages.
	(to prevent blindly doing readahead on already cached pages)

Look-ahead is a technique to achieve I/O pipelining:

While the application is working through a chunk of cached pages, the kernel
reads-ahead the next chunk of pages _before_ time of need.  It effectively
hides low level I/O latencies to high level applications.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Jan Kara
6ce745ed39 readahead: code cleanup
Rename file_ra_state.prev_page to prev_index and file_ra_state.offset to
prev_offset.  Also update of prev_index in do_generic_mapping_read() is now
moved close to the update of prev_offset.

[wfg@mail.ustc.edu.cn: fix it]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:52 -07:00
Jan Kara
ec0f163722 readahead: improve heuristic detecting sequential reads
Introduce ra.offset and store in it an offset where the previous read
ended.  This way we can detect whether reads are really sequential (and
thus we should not mark the page as accessed repeatedly) or whether they
are random and just happen to be in the same page (and the page should
really be marked accessed again).

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:52 -07:00
Christoph Lameter
05a0416be2 [PATCH] Drop __get_zone_counts()
Values are readily available via ZVC per node and global sums.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:18 -08:00
Andrew Morton
8bde37f08f [PATCH] io-accounting-read-accounting nfs fix
nfs's ->readpages uses read_cache_pages().  Wire it up there.

[wfg@mail.ustc.edu.cn: account only successful nfs/fuse reads]
Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:41 -08:00
Josef Sipek
e9536ae720 [PATCH] struct path: convert mm
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:47 -08:00
OGAWA Hirofumi
38da288b8b [PATCH] read_cache_pages() cleanup
Use put_pages_list() instead of opencoding it.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:34 -08:00
OGAWA Hirofumi
029e332ea7 [PATCH] Cleanup read_pages()
Current read_pages() assume ->readpages() frees the passed pages.

This patch free the pages in ->read_pages(), if those were remaining in the
pages_list.  So, readpages() just can ignore the remaining pages in
pages_list.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:56 -08:00
Steven Whitehouse
0a1340c185 Merge rsync://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/linux/kernel.h
2006-07-03 10:25:08 -04:00
Andreas Mohr
d6e05edc59 spelling fixes
acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:35:02 +02:00
Randy Dunlap
bd40cddae2 [PATCH] kernel-doc: mm/readhead fixup
Put short function description for read_cache_pages() on one line as needed
by kernel-doc.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:10 -07:00
Zach Brown
9f1a3cfcff [PATCH] AOP_TRUNCATED_PAGE victims in read_pages() belong in the LRU
AOP_TRUNCATED_PAGE victims in read_pages() belong in the LRU

Nick Piggin rightly pointed out that the introduction of AOP_TRUNCATED_PAGE
to read_pages() was wrong to leave A_T_P victim pages in the page cache but
not put them in the LRU.  Failing to do so hid them from the VM.

A_T_P just means that the aop method unlocked the page rather than
performing IO.  It would be very rare that the page was truncated between
the unlock and testing A_T_P.  So we leave the pages in the LRU for likely
reuse soon rather than backing them back out of the page cache.  We do this
by matching the behaviour before the A_T_P introduction which added pages
to the LRU regardless of what ->readpage() did.

This doesn't include the unrelated cleanup in Nick's initial fix which
changed read_pages() to return void to match its only caller's behaviour of
ignoring errors.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:54 -07:00
Steven Whitehouse
86579dd06d Merge branch 'master' 2006-03-31 15:34:58 -05:00
Andrew Morton
d8733c2956 [PATCH] ext3_readdir: use generic readahead
Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory.  So for large
directories we end up performing no readahead at all and we suck.

So take it all out and use the core VM's page_cache_readahead().  This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.

Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space.  Fortunately the readahead code is all set up to handle this.

Tested with printk.  It works.  I was struggling to find a real workload which
actually cared.

(The patch also exports page_cache_readahead() to GPL modules)

Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:09 -08:00
Steven Pratt
aed75ff3ca [PATCH] readahead: fix initial window size calculation
The current current get_init_ra_size is not optimal across different IO
sizes and max_readahead values.  Here is a quick summary of sizes computed
under current design and under the attached patch.  All of these assume 1st
IO at offset 0, or 1st detected sequential IO.

	32k max, 4k request

	old         new
	-----------------
	 8k        8k
	16k       16k
	32k       32k

	128k max, 4k request
	old         new
	-----------------
	32k         16k
	64k         32k
	128k        64k
	128k       128k

	128k max, 32k request
	old         new
	-----------------
	32k         64k    <-----
	64k        128k
	128k       128k

	512k max, 4k request
	old         new
	-----------------
	4k         32k     <----
	16k        64k
	64k       128k
	128k      256k
	512k      512k

Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:03 -08:00
Oleg Nesterov
a564da3964 [PATCH] readahead: ->prev_page can overrun the ahead window
If get_next_ra_size() does not grow fast enough, ->prev_page can overrun
the ahead window.  This means the caller will read the pages from
->ahead_start + ->ahead_size to ->prev_page synchronously.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:03 -08:00
Steven Whitehouse
d41cc702cc [GFS2] Export file_ra_state_init
Export file_ra_state_init so that its possible to use the already
exported functions which require a struct ra_state as an argument
from a module.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30 08:53:33 +00:00
Zach Brown
994fc28c7b [PATCH] add AOP_TRUNCATED_PAGE, prepend AOP_ to WRITEPAGE_ACTIVATE
readpage(), prepare_write(), and commit_write() callers are updated to
understand the special return code AOP_TRUNCATED_PAGE in the style of
writepage() and WRITEPAGE_ACTIVATE.  AOP_TRUNCATED_PAGE tells the caller that
the callee has unlocked the page and that the operation should be tried again
with a new page.  OCFS2 uses this to detect and work around a lock inversion in
its aop methods.  There should be no change in behaviour for methods that don't
return AOP_TRUNCATED_PAGE.

WRITEPAGE_ACTIVATE is also prepended with AOP_ for consistency and they are
made enums so that kerneldoc can be used to document their semantics.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2006-01-03 11:45:42 -08:00
Andrew Morton
7361f4d8ca [PATCH] readahead commentary
Add a few comments surrounding the generic readahead API.

Also convert some ulongs into pgoff_t: the identifier for PAGE_CACHE_SIZE
offsets into pagecache.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:37 -08:00
Steven Pratt
3b30bbd963 [PATCH] readahead: reset cache_hit earlier
We don't reset the cache hit count until after readahead does a successful
readahead.  This seems to leave a corner case open where we miss in cache,
but don't restart the readhead right away.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:25 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00