Commit Graph

205 Commits

Author SHA1 Message Date
Mika Westerberg
3cdb9446a1 thunderbolt: Add support for Intel Ice Lake
The Thunderbolt controller is integrated into the Ice Lake CPU itself
and requires special flows to power it on and off using force power bit
in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from
the discrete solutions. Now the firmware notifies the driver whether
RTD3 entry or exit are possible. The driver is responsible of sending
Go2Sx command through link controller mailbox when system enters Sx
states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow
Titan Ridge.

Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:15:06 +03:00
Mika Westerberg
3f415e5ee1 thunderbolt: Expose active parts of NVM even if upgrade is not supported
Ice Lake Thunderbolt controller NVM firmware is part of the BIOS image
which means it is not writable through the DMA port anymore. However, we
can still read it so we can keep nvm_version and active parts of NVM.
This way users still can find out the active NVM version and other
potentially useful information directly from Linux.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:15:01 +03:00
Mika Westerberg
58f414fa43 thunderbolt: Hide switch attributes that are not set
Thunderbolt host routers may not always contain DROM that includes
device identification information. This is mostly needed for Ice Lake
systems but some Falcon Ridge controllers on PCs also do not have DROM.

In that case hide the identification attributes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:14:56 +03:00
Mika Westerberg
d94dcbb101 thunderbolt: Do not fail adding switch if some port is not implemented
There are two ways to mark a port as unimplemented. Typical way is to
return port type as TB_TYPE_INACTIVE when its config space is read.
Alternatively if the port is not physically present (such as ports 10
and 11 in ICL) reading from port config space returns
TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails
out from adding the switch if it receives any error during port
inititialization which is wrong.

Handle this properly and just leave the port as TB_TYPE_INACTIVE before
continuing to the next port.

This also allows us to get rid of special casing for Light Ridge port 5
in eeprom.c.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:14:51 +03:00
Mika Westerberg
943795219d thunderbolt: Use 32-bit writes when writing ring producer/consumer
The register access should be using 32-bit reads/writes according to the
datasheet. With the previous generation hardware 16-bit writes have been
working but starting with ICL this is not the case anymore so fix
producer/consumer register update to use correct width register address.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:14:46 +03:00
Mika Westerberg
f437c24bf6 thunderbolt: Move NVM upgrade support flag to struct icm
This is depends on the controller and on the platform/CPU we are
running. Move it to struct icm so we can set it per controller.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26 12:14:32 +03:00
Mika Westerberg
ce19f91eae thunderbolt: Correct path indices for PCIe tunnel
PCIe tunnel path indices got mixed up when we added support for tunnels
between switches that are not adjacent. This did not affect the
functionality as it is just an index but fix it now nevertheless to make
the code easier to understand.

Reported-by: Rajmohan Mani <rajmohan.mani@intel.com>
Fixes: 8c7acaaf02 ("thunderbolt: Extend tunnel creation to more than 2 adjacent switches")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2019-08-26 12:08:57 +03:00
J. Bruce Fields
04f7745300 thunderbolt: Show key using %*pE not %*pEp
%*pEp (without "h" or "o") is a no-op.  This string could contain
arbitrary (non-NULL) characters, so we do want escaping.  Use %*pE like
every other caller.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-06 15:35:43 +03:00
Andy Shevchenko
100c12f20d thunderbolt: Switch to use device_property_count_uXX()
Use device_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-06 14:45:08 +03:00
Linus Torvalds
f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Suzuki K Poulose
418e3ea157 bus_find_device: Unify the match callback with class_find_device
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device().  If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward.  Also with that, constify
the "data" parameter as it is passed as a const to the match function.

For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24 05:22:31 +02:00
Mika Westerberg
0d53827d7c thunderbolt: Implement CIO reset correctly for Titan Ridge
When starting ICM firmware on Apple systems we need to perform CIO reset
as part of the flow. However, it turns out that the reset register has
changed to another location in Titan Ridge.

Fix this by introducing ->cio_reset() callback with corresponding
implementations for Alpine and Titan Ridge.

Fixes: c4630d6ae6 ("thunderbolt: Start firmware on Titan Ridge Apple systems")
Reported-by: Peter Bowen <pzb@amazon.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-14 14:25:43 +03:00
Mika Westerberg
4f7c2e0d87 thunderbolt: Make sure device runtime resume completes before taking domain lock
When a device is authorized from userspace by writing to authorized
attribute we first take the domain lock and then runtime resume the
device in question. There are two issues with this.

First is that the device connected notifications are blocked during this
time which means we get them only after the authorization operation is
complete. Because of this the authorization needed flag from the
firmware notification is not reflecting the real authorization status
anymore. So what happens is that the "authorized" keeps returning 0 even
if the device was already authorized properly.

Second issue is that each time the controller is runtime resumed the
connection_id field of device connected notification may be different
than in the previous resume. We need to use the latest connection_id
otherwise the firmware rejects the authorization command.

Fix these by moving runtime resume operations to happen before the
domain lock is taken, and waiting for the updated device connected
notification from the firmware before we allow runtime resume of a
device to complete.

While there add missing locking to tb_switch_nvm_read().

Fixes: 09f11b6c99 ("thunderbolt: Take domain lock in switch sysfs attribute callbacks")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-12 13:30:46 +03:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner
09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Linus Torvalds
f678d6da74 Char/Misc patches for 5.2-rc1 - part 2
Here is the "real" big set of char/misc driver patches for 5.2-rc1
 
 Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups
 
 Feels like this tree is getting to be a dumping ground of "small driver
 subsystems" these days.  Which is fine with me, if it makes things
 easier for those subsystem maintainers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
 f6V3MvRffg4qUp3cGbU=
 =R37j
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...
2019-05-07 13:39:22 -07:00
Nathan Chancellor
37209783c7 thunderbolt: Make priority unsigned in struct tb_path
Clang warns:

drivers/thunderbolt/tunnel.c:504:17: warning: implicit truncation from
'int' to bit-field changes value from 5 to -3
[-Wbitfield-constant-conversion]
        path->priority = 5;
                       ^ ~
1 warning generated.

The priority member in struct tb_path is only ever assigned a positive
number:

$ rg -n priority drivers/thunderbolt/path.c
drivers/thunderbolt/tunnel.c:99:        path->priority = 3;
drivers/thunderbolt/tunnel.c:308:       path->priority = 2;
drivers/thunderbolt/tunnel.c:323:       path->priority = 1;
drivers/thunderbolt/tunnel.c:504:       path->priority = 5;

Furthermore, that value is only assigned to an unsigned integer in
tb_path_activate (the priority member in struct tb_regs_hop).

Fixes: 44242d6c97 ("thunderbolt: Add support for DMA tunnels")
Link: https://github.com/ClangBuiltLinux/linux/issues/454
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-25 12:18:27 +03:00
Eric Biggers
877b5691f2 crypto: shash - remove shash_desc::flags
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP.  These would all need to be fixed if any shash algorithm
actually started sleeping.  For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API.  However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk.  It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-25 15:38:12 +08:00
Mika Westerberg
c4630d6ae6 thunderbolt: Start firmware on Titan Ridge Apple systems
Titan Ridge flow to start the firmware is the same as Alpine Ridge so we
can do the same on Titan Ridge based Apple systems.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:54 +03:00
Mika Westerberg
6755156abc thunderbolt: Reword output of tb_dump_hop()
While tb_dump_hop() prints out necessary information it is in format
that is quite hard to read from the logs especially when one needs to
follow the path to see that the setup is correct.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:54 +03:00
Mika Westerberg
62efe699a7 thunderbolt: Make rest of the logging to happen at debug level
Now that the driver can handle every possible tunnel types there is no
point to log everything as info level so turn these to happen at debug
level instead.

While at it remove duplicated tunnel activation log message
(tb_tunnel_activate() calls tb_tunnel_restart() which print the same
message) and add one missing '\n' termination.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
b323a98f9b thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters
The printing macros do not modify the passed object so make them
const. While there make tb_route() to take const parameter as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
7ea4cd6b20 thunderbolt: Add support for XDomain connections
Two domains (hosts) can be connected through a Thunderbolt cable and in
that case they can start software services such as networking over the
high-speed DMA paths. Now that we have all the basic building blocks in
place to create DMA tunnels over the Thunderbolt fabric we can add this
support to the software connection manager as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
444ac38448 thunderbolt: Make tb_switch_alloc() return ERR_PTR()
In order to detect possible connections to other domains we need to be
able to find out why tb_switch_alloc() fails so make it return ERR_PTR()
instead. This allows the caller to differentiate between errors such as
-ENOMEM which comes from the kernel and for instance -EIO which comes
from the hardware when trying to access the possible switch.

Convert all the current call sites to handle this properly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
44242d6c97 thunderbolt: Add support for DMA tunnels
In addition to PCIe and Display Port tunnels it is also possible to
create tunnels that forward DMA traffic from the host interface adapter
(NHI) to a NULL port that is connected to another domain through a
Thunderbolt cable. These tunnels can be used to carry software messages
such as networking packets.

To support this we introduce another tunnel type (TB_TUNNEL_DMA) that
supports paths from NHI to NULL port and back.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
3b4b3235ca thunderbolt: Add XDomain UUID exchange support
Currently ICM has been handling XDomain UUID exchange so there was no
need to have it in the driver yet. However, since now we are going to
add the same capabilities to the software connection manager it needs to
be handled properly.

For this reason modify the driver XDomain protocol handling so that if
the remote domain UUID is not filled in the core will query it first and
only then start the normal property exchange flow.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
559c1e1e01 thunderbolt: Run tb_xdp_handle_request() in system workqueue
We run all XDomain requests during discovery in tb->wq and since it only
runs one work at the time it means that sending back reply to the other
domain may be delayed too much depending whether there is an active
XDomain discovery request running.

To make sure we can send reply to the other domain as soon as possible
run tb_xdp_handle_request() in system workqueue instead. Since the
device can be hot-removed in the middle we need to make sure the domain
structure is still around when the function is run so increase reference
count before we schedule the reply work.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
ab9f31cfa8 thunderbolt: Do not tear down tunnels when driver is unloaded
Now that we have capability to discover existing tunnels during driver
load there is no point tearing down tunnels when the driver gets
unloaded. Instead we can just leave them running. If user disconnects
devices while there is no Thunderbolt driver loaded, tunneled protocol
hotplug happens and is handled by the corresponding driver (pciehp in
case of PCIe tunnel, GFX driver in case of DP tunnel).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
4f807e47ee thunderbolt: Add support for Display Port tunnels
Display Port tunnels are somewhat more complex than PCIe tunnels as it
requires 3 tunnels (AUX Rx/Tx and Video). In addition we are not
supposed to create the tunnels immediately when a DP OUT is enumerated.
Instead we need to wait until we get hotplug event to that adapter port
or check if the port has HPD set before tunnels can be established. This
adds Display Port tunneling support to the software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
c5ee6feb34 thunderbolt: Rework NFC credits handling
NFC (non flow control) credits is actually 20-bit field so update
tb_port_add_nfc_credits() to handle this properly. This allows us to set
NFC credits for Display Port path in subsequent patches.

Also make sure the function does not update the hardware if the
underlying switch is already unplugged.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
e78db6f08b thunderbolt: Generalize port finding routines to support all port types
We will be needing these routines to find Display Port adapters as well
so modify them to take port type as the second parameter.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
344e06430a thunderbolt: Scan only valid NULL adapter ports in hotplug
The only way to expand Thunderbolt topology is through the NULL adapter
ports (typically ports 1, 2, 3 and 4). There is no point handling
Thunderbolt hotplug events on any other port.

Add a helper function (tb_port_is_null()) that can be used to determine
if the port is NULL port, and use it in software connection manager code
when hotplug event is handled.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
99cabbb006 thunderbolt: Add support for full PCIe daisy chains
Currently the software connection manager (tb.c) has only supported
creating a single PCIe tunnel, no PCIe device daisy chaining has been
supported so far. This updates the software connection manager so that
it now can create PCIe tunnels for full chain of six devices.

Because PCIe allows DMA and opens possibility for DMA attacks we change
security level to "user" meaning that PCIe tunneling requires that the
userspace authorizes the devices first. This makes it possible to block
PCIe tunneling completely while still allowing other types of tunnels to
be automatically created.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
0414bec5f3 thunderbolt: Discover preboot PCIe paths the boot firmware established
In Apple Macs the boot firmware (EFI) connects all devices automatically
when the system is started, before it hands over to the OS. Instead of
ignoring we discover all those PCIe tunnels and record them using our
internal structures, just like we do when a device is connected after
the OS is already up.

By doing this we can properly tear down tunnels when devices are
disconnected. Also this allows us to resume the existing tunnels after
system suspend/resume cycle.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:53 +03:00
Mika Westerberg
aae9e27f3b thunderbolt: Deactivate all paths before restarting them
State of the connected devices and tunnel configuration is not known
during resume. For example some paths may not be complete anymore if the
user has unplugged the related devices. So instead of marking all paths
as inactive we go ahead and deactivate them explicitly before we restart
them.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
8c7acaaf02 thunderbolt: Extend tunnel creation to more than 2 adjacent switches
Now that we can allocate hop IDs per port on a path, we can take
advantage of this and create tunnels covering longer paths than just
between two adjacent switches. PCIe actually does not need this as it
is typically a daisy chain between two adjacent switches but this way we
do not need to hard-code creation of the tunnel.

While there add name to struct tb_path to make debugging easier, and
update kernel-doc comments.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
fb19fac1d7 thunderbolt: Add helper function to iterate from one port to another
We need to be able to walk from one port to another when we are creating
paths where there are multiple switches between two ports. For this
reason introduce a new function tb_next_port_on_path().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-04-18 11:18:52 +03:00
Mika Westerberg
dfe40ca486 thunderbolt: Assign remote for both ports in case of dual link
Currently the driver only assigns remote port for the primary port if in
case of dual link. This makes things such as walking from one port to
another more complex than necessary because the code needs to change
from secondary to primary port if the path that is established is
created using secondary links.

In order to always assign both remote pointers we need to prevent the
scanning code from following the secondary link. Failing to do that
might cause problems as the same switch may be enumerated twice (or
removed in case of unplug). Handle that properly by introducing a new
function tb_port_has_remote() that returns true only for the primary
port. We also update tb_is_upstream_port() to support both dual link
ports, make it take const port pointer and move it below
tb_upstream_port() to keep similar functions close.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
0b2863ac3c thunderbolt: Add functions for allocating and releasing HopIDs
Each port has a separate path configuration space that is used for
finding the next hop (switch) in the path. HopID is an index to this
configuration space. HopIDs 0 - 7 are reserved by the protocol.

In order to get next available HopID for each direction we provide two
pairs of helper functions that can be used to allocate and release
HopIDs for a given port.

While there remove obsolete TODO comment.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
93f36ade5b thunderbolt: Generalize tunnel creation functionality
To be able to tunnel non-PCIe traffic, separate tunnel functionality
into generic and PCIe specific parts. Rename struct tb_pci_tunnel to
tb_tunnel, and make it hold an array of paths instead of just two.
Update all the tunneling functions to take this structure as parameter.

We also move tb_pci_port_active() to switch.c (and rename it) where we
will be keeping all port and switch related functions.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
1752b9f787 thunderbolt: Rename tunnel_pci to tunnel
In order to tunnel non-PCIe traffic as well rename tunnel_pci.[ch] to
tunnel.[ch] to reflect this fact. No functional changes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
56183c88f3 thunderbolt: Cache adapter specific capability offset into struct port
The adapter specific capability either is there or not if the port does
not hold an adapter. Instead of always finding it on-demand we read the
offset just once when the port is initialized.

While there we update the struct port documentation to follow kernel-doc
format.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
4944269305 thunderbolt: Properly disable path
We need to wait until all buffers have been drained before the path can
be considered disabled. Do this for every hop in a path.

This adds another bit field to struct tb_regs_hop even if we are trying
to get rid of them but we can clean them up another day.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
5480dfc275 thunderbolt: Set sleep bit when suspending switch
Thunderbolt 2 devices and beyond link controller needs to be notified
when a switch is going to be suspended by setting bit 31 in LC_SX_CTRL
register. Add this functionality to the software connection manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:52 +03:00
Mika Westerberg
e879a709de thunderbolt: Configure lanes when switch is initialized
Thunderbolt 2 devices and beyond need to have additional bits set in
link controller specific registers. This includes two bits in LC_SX_CTRL
that tell the link controller which lane is connected and whether it is
upstream facing or not.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
a9be55824a thunderbolt: Move LC specific functionality into a separate file
We will be adding more link controller functionality in subsequent
patches and it does not make sense to keep all that in switch.c, so
separate LC functionality into its own file.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
ffd003b2f8 thunderbolt: Add dummy read after port capability list walk on Light Ridge
Light Ridge has an issue where reading the next capability pointer
location in port config space the read data is not cleared. It is fine
to read capabilities each after another so only thing we need to do is
to make sure we issue dummy read after tb_port_find_cap() is finished to
avoid the issue in next read.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
8b0110d9d1 thunderbolt: Enable TMU access when accessing port space on legacy devices
Light Ridge and Eagle Ridge both need to have TMU access enabled before
port space can be fully accessed so make sure it happens on those. This
allows us to get rid of the offset quirk in tb_port_find_cap().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
f0342e757c thunderbolt: Do not allocate switch if depth is greater than 6
Maximum depth in Thunderbolt topology is 6 so make sure it is not
possible to allocate switches that exceed the depth limit.

While at it update tb_switch_alloc() to use upper/lower_32_bits()
following tb_switch_alloc_safe_mode().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00
Mika Westerberg
09f11b6c99 thunderbolt: Take domain lock in switch sysfs attribute callbacks
switch_lock was introduced because it allowed serialization of device
authorization requests from userspace without need to take the big
domain lock (tb->lock). This was fine because device authorization with
ICM is just one command that is sent to the firmware. Now that we start
to handle all tunneling in the driver switch_lock is not enough because
we need to walk over the topology to establish paths.

For this reason drop switch_lock from the driver completely in favour of
big domain lock.

There is one complication, though. If userspace is waiting for the lock
in tb_switch_set_authorized(), it keeps the device_del() from removing
the sysfs attribute because it waits for active users to release the
attribute first which leads into following splat:

    INFO: task kworker/u8:3:73 blocked for more than 61 seconds.
          Tainted: G        W         5.1.0-rc1+ #244
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/u8:3    D12976    73      2 0x80000000
    Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
    Call Trace:
     ? __schedule+0x2e5/0x740
     ? _raw_spin_lock_irqsave+0x12/0x40
     ? prepare_to_wait_event+0xc5/0x160
     schedule+0x2d/0x80
     __kernfs_remove.part.17+0x183/0x1f0
     ? finish_wait+0x80/0x80
     kernfs_remove_by_name_ns+0x4a/0x90
     remove_files.isra.1+0x2b/0x60
     sysfs_remove_group+0x38/0x80
     sysfs_remove_groups+0x24/0x40
     device_remove_attrs+0x3d/0x70
     device_del+0x14c/0x360
     device_unregister+0x15/0x50
     tb_switch_remove+0x9e/0x1d0 [thunderbolt]
     tb_handle_hotplug+0x119/0x5a0 [thunderbolt]
     ? process_one_work+0x1b7/0x420
     process_one_work+0x1b7/0x420
     worker_thread+0x37/0x380
     ? _raw_spin_unlock_irqrestore+0xf/0x30
     ? process_one_work+0x420/0x420
     kthread+0x118/0x130
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x35/0x40

We deal this by following what network stack did for some of their
attributes and use mutex_trylock() with restart_syscall(). This makes
userspace release the attribute allowing sysfs attribute removal to
progress before the write is restarted and eventually fail when the
attribute is removed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18 11:18:51 +03:00