Commit Graph

28 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
2146325df2 leds: leds-gpio: Change blink_set callback to be able to turn off blinking
The leds-gpio blink_set() callback follows the same prototype as the
main leds subsystem blink_set() one.

The problem is that to stop blink, normally, a leds driver does it
in the brightness_set() callback when asked to set a new fixed value.

However, with leds-gpio, the platform has no hook to do so, as this
later callback results in a standard GPIO manipulation.

This changes the leds-gpio specific callback to take a new argument
that indicates whether the LED should be blinking or not and in what
state it should be set if not. We also update the dns323 platform
which seems to be the only user of this so far.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26 13:07:55 +01:00
Richard Purdie
a1dd8c6172 leds: Futher document blink_set
Futher document blink_set function pointer

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23 20:21:39 +01:00
Trent Piepho
ed88bae691 leds: Add options to have GPIO LEDs start on or keep their state
There already is a "default-on" trigger but there are problems with it.

For one, it's a inefficient way to do it and requires led trigger support
to be compiled in.

But the real reason is that is produces a glitch on the LED.  The GPIO is
allocate with the LED *off*, then *later* when the trigger runs it is
turned back on.  If the LED was already on via the GPIO's reset default or
action of the firmware, this produces a glitch where the LED goes from on
to off to on.  While normally this is fast enough that it wouldn't be
noticeable to a human observer, there are still serious problems.

One is that there may be something else on the GPIO line, like a hardware
alarm or watchdog, that is fast enough to notice the glitch.

Another is that the kernel may panic before the LED is turned back on, thus
hanging with the LED in the wrong state.  This is not just speculation, but
actually happened to me with an embedded system that has an LED which
should turn off when the kernel finishes booting, which was left in the
incorrect state due to a bug in the OF LED binding code.

We also let GPIO LEDs get their initial value from whatever the current
state of the GPIO line is.  On some systems the LEDs are put into some
state by the firmware or hardware before Linux boots, and it is desired to
have them keep this state which is otherwise unknown to Linux.

This requires that the underlying GPIO driver support reading the value of
output GPIOs.  Some drivers support this and some do not.

The platform device binding gains a field in the platform data
"default_state" that controls this.  There are three constants defined to
select from on, off, or keeping the current state.  The OpenFirmware
binding uses a property named "default-state" that can be set to "on",
"off", or "keep".  The default if the property isn't present is off.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23 20:21:39 +01:00
Mark Brown
92722b1bb1 leds: Further document parameters for blink_set()
The documentation for the parameters of blink_set() was a bit hard
to find so put some where I'd expected to find it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23 20:20:35 +01:00
Richard Purdie
defb512d25 leds: Add suspend/resume state flags to leds-gpio
Add an option to preserve LED state when suspending/resuming to the LED
gpio driver. Based on a suggestion from Robert Jarzmik.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:26 +01:00
Guennadi Liakhovetski
1bd465e6b0 leds: allow led-drivers to use a variable range of brightness values
This patch allows drivers to override the default maximum brightness value
of 255.  We take care to preserve backwards-compatibility as much as
possible, so that user-space ABI doesn't change for existing drivers.
LED trigger code has also been updated to use the per-LED maximum.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:25 +01:00
Richard Purdie
859cb7f2a4 leds: Add suspend/resume to the core class
Add suspend/resume to the core class and remove all the now unneeded
code from various drivers. Originally the class code couldn't support
suspend/resume but since class_device can there is no reason for
each driver doing its own suspend/resume anymore.
2009-01-08 17:55:03 +00:00
Wolfram Sang
e2387d6c20 leds: Make header variable naming consistent
There is one place where the struct led_classdev as the function
argument is named differently. Fix it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:38:57 +00:00
Trent Piepho
326bb8a5a1 leds: Make default trigger fields const
The default_trigger fields of struct gpio_led and thus struct
led_classdev are pretty much always assigned from a string literal,
which means the string can't be modified.  Which is fine, since there is
no reason to modify the string and in fact it never is.

But they should be marked const to prevent such code from being added,
to prevent warnings if -Wwrite-strings is used, when assigned from a
constant string other than a string literal (which produces a warning
under current kernel compiler flags), and for general good coding
practices.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:34:12 +01:00
Nate Case
f46e9203d9 leds: Add support for Philips PCA955x I2C LED drivers
This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553
LED driver chips.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Anton Vorontsov
781a54e766 leds: mark led_classdev.default_trigger as const
LED classdev core doesn't modify memory pointed by the default_trigger,
so mark it as const and we'll able to pass const char *s without getting
compiler warnings.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Richard Purdie
2e214e0fa2 leds: Document the context brightness_set needs
Make sure there is no confusion about the contexts brightness_set
can be called under by documenting it.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:49:30 +01:00
Henrique de Moraes Holschuh
29d76dfa29 leds: Add support to leds with readable status
Some led hardware allows drivers to query the led state, and this patch
adds a hook to let the led class take advantage of that information when
available.

Without this functionality, when access to the led hardware is not
exclusive (i.e. firmware or hardware might change its state behind the
kernel's back), reality goes out of sync with the led class' idea of what
the led is doing, which is annoying at best.

Behaviour for drivers that do not or cannot read the led status is
unchanged.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:37:42 +01:00
Herbert Valerio Riedel
ca3259b360 leds: enable support for blink_set() platform hook in leds-gpio
Enhance leds-gpio to provide hardware-based led flashing by passing
through the blink_set() call to a optionally set platform-specific
function pointer.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:37:42 +01:00
Rafael J. Wysocki
b844eba292 PM: Remove destroy_suspended_device()
After 2.6.24 there was a plan to make the PM core acquire all device
semaphores during a suspend/hibernation to protect itself from
concurrent operations involving device objects.  That proved to be
too heavy-handed and we found a better way to achieve the goal, but
before it happened, we had introduced the functions
device_pm_schedule_removal() and destroy_suspended_device() to allow
drivers to "safely" destroy a suspended device and we had adapted some
drivers to use them.  Now that these functions are no longer necessary,
it seems reasonable to remove them and modify their users to use the
normal device unregistration instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:28 -07:00
Márton Németh
4c79141d28 leds: Add support for hardware accelerated LED flashing
Extends the leds subsystem with a blink_set() callback function which can
be optionally implemented by a LED driver. If implemented, the driver can use
the hardware acceleration for blinking a LED.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:49:38 +00:00
Rafael J. Wysocki
fa23f5cce8 leds: add possibility to remove leds classdevs during suspend/resume
Make it possible to unregister a led classdev object in a safe way during a
suspend/resume cycle.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:23 -08:00
Richard Purdie
dc47206e55 leds: Fix led trigger locking bugs
Convert part of the led trigger core from rw spinlocks to rw
semaphores. We're calling functions which can sleep from invalid
contexts otherwise. Fixes bug #9264.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-07 09:06:53 +00:00
Yoichi Yuasa
df96efd73b leds: Add missing include for leds.h
This patch has added #include <linux/spinlock.h> to include/linux/leds.h
for rwlock_t.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-09-11 22:24:45 +01:00
Linus Torvalds
d7f5e3df35 Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Convert from struct class_device to struct device
  leds: leds-gpio for ngw100
  leds: Add warning printks in error paths
  leds: Fix trigger unregister_simple if register_simple fails
  leds: Use menuconfig objects II - LED
  leds: Teach leds-gpio to handle timer-unsafe GPIOs
  leds: Add generic GPIO LED driver
2007-07-22 11:22:01 -07:00
Robert P. J. Day
0a3021f4e2 Remove unnecessary includes of spinlock.h under include/linux
Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Richard Purdie
f8a7c6fe14 leds: Convert from struct class_device to struct device
Convert the LEDs class from struct class_device to struct device
since class_device is scheduled for removal.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-16 01:15:51 +01:00
Raphael Assenat
22e03f3b58 leds: Add generic GPIO LED driver
This patch adds support for GPIO connected leds via the new GPIO framework.

Information about leds (gpio, polarity, name, default trigger) is passed
to the driver via platform_data.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
Johannes Berg
af410fc13d [PATCH] make leds.h include relevant headers
Make it possible to include linux/leds.h without first including list.h and
spinlock.h.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:13 -07:00
Ben Dooks
fb5035dbbe [PATCH] leds: re-layout include/linux/leds.h
Lay out the structure definitions in include/linux/leds.h to be aligned as
much as possible.  Also minor updates to the comments to make them more
concise.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:41 -07:00
Richard Purdie
2bfb646cdf [PATCH] LED: Add IDE disk activity LED trigger
Add an LED trigger for IDE disk activity to the ide-disk driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
c3bc9956ec [PATCH] LED: add LED trigger tupport
Add support for LED triggers to the LED subsystem.  "Triggers" are events
which change the state of an LED.  Two kinds of trigger are available, simple
ones which can be added to exising code with minimum disruption and complex
ones for implementing new or more complex functionality.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Richard Purdie
c72a1d608d [PATCH] LED: add LED class
Add the foundations of a new LEDs subsystem.  This patch adds a class which
presents LED devices within sysfs and allows their brightness to be
controlled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00