Commit Graph

23 Commits

Author SHA1 Message Date
Jason Wessel
7f8b7ed6f8 kgdb: Always process the whole breakpoint list on activate or deactivate
This patch fixes 2 edge cases in using kgdb in conjunction with gdb.

1) kgdb_deactivate_sw_breakpoints() should process the entire array of
   breakpoints.  The failure to do so results in breakpoints that you
   cannot remove, because a break point can only be removed if its
   state flag is set to BP_SET.

   The easy way to duplicate this problem is to plant a break point in
   a kernel module and then unload the kernel module.

2) kgdb_activate_sw_breakpoints() should process the entire array of
   breakpoints.  The failure to do so results in missed breakpoints
   when a breakpoint cannot be activated.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11 08:43:20 -06:00
Jason Wessel
d625e9c0d7 kgdb: continue and warn on signal passing from gdb
On some architectures for the segv trap, gdb wants to pass the signal
back on continue.  For kgdb this is not the default behavior, because
it can cause the kernel to crash if you arbitrarily pass back a
exception outside of kgdb.

Instead of causing instability, pass a message back to gdb about the
supported kgdb signal passing and execute a standard kgdb continue
operation.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11 08:43:19 -06:00
Jason Wessel
028e7b1759 kgdb: allow for cpu switch when single stepping
The kgdb core should not assume that a single step operation of a
kernel thread will complete on the same CPU.  The single step flag is
set at the "thread" level and it is possible in a multi cpu system
that a kernel thread can get scheduled on another cpu the next time it
is run.

As a further safety net in case a slave cpu is hung, the debug master
cpu will try 100 times before giving up and assuming control of the
slave cpus is no longer possible.  It is more useful to be able to get
some information out of kgdb instead of spinning forever.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11 08:43:17 -06:00
Jason Wessel
84667d4849 kgdb: Read buffer overflow
Roel Kluin reported an error found with Parfait.  Where we want to
ensure that that kgdb_info[-1] never gets accessed.

Also check to ensure any negative tid does not exceed the size of the
shadow CPU array, else report critical debug context because it is an
internal kgdb failure.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11 08:43:13 -06:00
Hiroshi Shimamoto
1477b6a7ed sched: Remove unused __schedule() declaration
__schedule() had been removed.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4AF129C8.3030008@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 11:43:42 +01:00
Jason Wessel
364b5b7b1d sysrq, intel_fb: fix sysrq g collision
Commit 79e539453b introduced a
regression where you cannot use sysrq 'g' to enter kgdb.  The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics.  The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.

This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-05-15 07:56:24 -05:00
Jason Wessel
cc1e0f4f7a kgdb: call touch_softlockup_watchdog on resume
The softlockup watchdog needs to be touched when resuming the from the
kgdb stopped state to avoid the printk that a CPU is stuck if the
debugger was active for longer than the softlockup threshold.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06 13:50:59 -05:00
Jason Wessel
d7161a6534 kgdb, x86, arm, mips, powerpc: ignore user space single stepping
On the x86 arch, user space single step exceptions should be ignored
if they occur in the kernel space, such as ptrace stepping through a
system call.

First check if it is kgdb that is executing a single step, then ensure
it is not an accidental traversal into the user space, while in kgdb,
any other time the TIF_SINGLESTEP is set, kgdb should ignore the
exception.

On x86, arm, mips and powerpc, the kgdb_contthread usage was
inconsistent with the way single stepping is implemented in the kgdb
core.  The arch specific stub should always set the
kgdb_cpu_doing_single_step correctly if it is single stepping.  This
allows kgdb to correctly process an instruction steps if ptrace
happens to be requesting an instruction step over a system call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-26 10:36:41 -05:00
Atsuo Igarashi
18d6522b86 kgdb: could not write to the last of valid memory with kgdb
On the ARM architecture, kgdb will crash the kernel if the last byte
of valid memory is written due to a flush_icache_range flushing
beyond the memory boundary.

Signed-off-by: Atsuo Igarashi <atsuo_igarashi@tripeaks.co.jp>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-26 10:36:41 -05:00
Jason Wessel
25fc999913 kgdb: fix gdb serial thread queries
The command "info threads" did not work correctly with kgdb.  It would
result in a silent kernel hang if used.

This patach addresses several problems.
 - Fix use of deprecated NR_CPUS
 - Fix kgdb to not walk linearly through the pid space
 - Correctly implement shadow pids
 - Change the threads per query to a #define
 - Fix kgdb_hex2long to work with negated values

The threads 0 and -1 are reserved to represent the current task.  That
means that CPU 0 will start with a shadow thread id of -2, and CPU 1
will have a shadow thread id of -3, etc...

From the debugger you can switch to a shadow thread to see what one of
the other cpus was doing, however it is not possible to execute run
control operations on any other cpu execept the cpu executing the
kgdb_handle_exception().

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-08-01 08:39:35 -05:00
Jason Wessel
a9b60bf4c2 kgdb: fix kgdb_validate_break_address to perform a mem write
A regression to the kgdb core was found in the case of using the
CONFIG_DEBUG_RODATA kernel option.  When this option is on, a breakpoint
cannot be written into any readonly memory page.  When an external
debugger requests a breakpoint to get set, the
kgdb_validate_break_address() was only checking to see if the address
to place the breakpoint was readable and lacked a write check.

This patch changes the validate routine to try reading (via the
breakpoint set request) and also to try immediately writing the break
point.  If either fails, an error is correctly returned and the
debugger behaves correctly.  Then an end user can make the
descision to use hardware breakpoints.

Also update the documentation to reflect that using
CONFIG_DEBUG_RODATA will inhibit the use of software breakpoints.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-08-01 08:39:34 -05:00
Jason Wessel
aabdc3b8c3 kgdb: sparse fix
- Fix warning reported by sparse
kernel/kgdb.c:1502:6: warning: symbol 'kgdb_console_write' was not declared.
	Should it be static?

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-06-24 10:52:55 -05:00
Harvey Harrison
827e609b45 kgdb: use common ascii helpers and put_unaligned_be32 helper
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-28 12:49:56 -05:00
Harvey Harrison
3fc957721d lib: create common ascii hex array
Add a common hex array in hexdump.c so everyone can use it.

Add a common hi/lo helper to avoid the shifting masking that is
done to get the upper and lower nibbles of a byte value.

Pull the pack_hex_byte helper from kgdb as it is opencoded many
places in the tree that will be consolidated.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:11:14 -07:00
Harvey Harrison
688b744d8b kgdb: fix signedness mixmatches, add statics, add declaration to header
Noticed by sparse:
arch/x86/kernel/kgdb.c:556:15: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:149:8: warning: symbol 'kgdb_do_roundup' was not declared. Should it be static?
kernel/kgdb.c:193:22: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:712:5: warning: symbol 'remove_all_break' was not declared. Should it be static?

Related to kgdb_hex2long:
arch/x86/kernel/kgdb.c:371:28: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/kgdb.c:371:28:    expected long *long_val
arch/x86/kernel/kgdb.c:371:28:    got unsigned long *<noident>
kernel/kgdb.c:469:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:469:27:    expected long *long_val
kernel/kgdb.c:469:27:    got unsigned long *<noident>
kernel/kgdb.c:470:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:470:27:    expected long *long_val
kernel/kgdb.c:470:27:    got unsigned long *<noident>
kernel/kgdb.c:894:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:894:27:    expected long *long_val
kernel/kgdb.c:894:27:    got unsigned long *<noident>
kernel/kgdb.c:895:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:895:27:    expected long *long_val
kernel/kgdb.c:895:27:    got unsigned long *<noident>
kernel/kgdb.c:1127:28: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1127:28:    expected long *long_val
kernel/kgdb.c:1127:28:    got unsigned long *<noident>
kernel/kgdb.c:1132:25: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1132:25:    expected long *long_val
kernel/kgdb.c:1132:25:    got unsigned long *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-05 07:13:21 -05:00
Jason Wessel
1a9a3e76dd kgdb: always use icache flush for sw breakpoints
On the ppc 4xx architecture the instruction cache must be flushed as
well as the data cache.  This patch just makes it generic for all
architectures where CACHE_FLUSH_IS_SAFE is set to 1.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:43 +02:00
Jason Wessel
56fb709329 kgdb: fix SMP NMI kgdb_handle_exception exit race
Fix the problem of protecting the kgdb handle_exception exit
which had an NMI race condition, while trying to restore
normal system operation.

There was a small window after the master processor sets cpu_in_debug
to zero but before it has set kgdb_active to zero where a
non-master processor in an SMP system could receive an NMI and
re-enter the kgdb_wait() loop.

As long as the master processor sets the cpu_in_debug before sending
the cpu roundup the cpu_in_debug variable can also be used to guard
against the race condition.

The kgdb_wait() function no longer needs to check
kgdb_active because it is done in the arch specific code
and handled along with the nmi traps at the low level.
This also allows kgdb_wait() to exit correctly if it was
entered for some unknown reason due to a spurious NMI that
could not be handled by the arch specific code.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:43 +02:00
Jason Wessel
737a460f21 kgdb: fix several kgdb regressions
kgdb core fixes:
- Check to see that mm->mmap_cache is not null before calling
  flush_cache_range(), else on arch=ARM it will cause a fatal
  fault.

- Breakpoints should only be restored if they are in the BP_ACTIVE
  state.

- Fix a typo in comments to "kgdb_register_io_module"

x86 kgdb fixes:
- Fix the x86 arch handler such that on a kill or detach that the
  appropriate cleanup on the single stepping flags gets run.

- Add in the DIE_NMIWATCHDOG call for x86_64

- Touch the nmi watchdog before returning the system to normal
  operation after performing any kind of kgdb operation, else
  the possibility exists to trigger the watchdog.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:40 +02:00
Jason Wessel
b4b8ac524d kgdb: fix optional arch functions and probe_kernel_*
Fix two regressions dealing with the kgdb core.

1) kgdb_skipexception and kgdb_post_primary_code are optional
functions that are only required on archs that need special exception
fixups.

2) The kernel address space scope must be set on any probe_kernel_*
function or archs such as ARCH=arm will not allow access to the kernel
memory space.  As an example, it is required to allow the full kernel
address space is when you the kernel debugger to inspect a system
call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:39 +02:00
Jason Wessel
64e9ee3095 kgdb: add x86 HW breakpoints
Add HW breakpoints into the arch specific portion of x86 kgdb.  In the
current x86 kernel.org kernels HW breakpoints are changed out in lazy
fashion because there is no infrastructure around changing them when
changing to a kernel task or entering the kernel mode via a system
call.  This lazy approach means that if a user process uses HW
breakpoints the kgdb will loose out.  This is an acceptable trade off
because the developer debugging the kernel is assumed to know what is
going on system wide and would be aware of this trade off.

There is a minor bug fix to the kgdb core so as to correctly call the
hw breakpoint functions with a valid value from the enum.

There is also a minor change to the x86_64 startup code when using
early HW breakpoints.  When the debugger is connected, the cpu startup
code must not zero out the HW breakpoint registers or you cannot hit
the breakpoints you are interested in, in the first place.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:39 +02:00
Jason Wessel
67baf94cd2 kgdb: print breakpoint removed on exception
If kgdb does remove a breakpoint that had a problem on the recursion
check, it should also print the address of the breakpoint.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:39 +02:00
Jason Wessel
7c3078b637 kgdb: clocksource watchdog
In order to not trip the clocksource watchdog, kgdb must touch the
clocksource watchdog on the return to normal system run state.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:38 +02:00
Jason Wessel
dc7d552705 kgdb: core
kgdb core code. Handles the protocol and the arch details.

[ mingo@elte.hu: heavily modified, simplified and cleaned up. ]
[ xemul@openvz.org: use find_task_by_pid_ns ]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 20:05:37 +02:00