Commit Graph

150 Commits

Author SHA1 Message Date
Roland Dreier
af74115eed target: Remove unused se_cmd.cmd_spdtl
This was originally for helping fabrics to determine overflow/underflow
status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-08-21 14:27:35 -07:00
Roland Dreier
d6dfc868bc target: Allow for target_submit_cmd() returning errors
We want it to be possible for target_submit_cmd() to return errors up
to its fabric module callers.  For now just update the prototype to
return an int, and update all callers to handle non-zero return values
as an error.

This is immediately useful for tcm_qla2xxx to fix a long-standing active
I/O session shutdown race, but tcm_fc, usb-gadget, and sbp-target the
fabric maintainers need to check + ACK that handling a target_submit_cmd()
failure due to session shutdown does not introduce regressions

(nab: Respin against for-next after initial NACK + update docbook comment +
      fix double se_cmd init in exception path for usb-gadget)

Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Chris Boot <bootc@bootc.net>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17 17:05:05 -07:00
Roland Dreier
e2397c7044 target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL
REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the
initiator sends a command that accesses a too-big LBA.  Add an enum
value and case entries so that target code can return this status.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:35 -07:00
Roland Dreier
1c7b13fe65 target: Remove se_session.sess_wait_list
Since we set se_session.sess_tearing_down and stop new commands from
being added to se_session.sess_cmd_list before we wait for commands to
finish when freeing a session, there's no need for a separate
sess_wait_list -- if we let new commands be added to sess_cmd_list
after setting sess_tearing_down, that would be a bug that breaks the
logic of waiting in-flight commands.

Also rename target_splice_sess_cmd_list() to
target_sess_cmd_list_set_waiting(), since we are no longer splicing
onto a separate list.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:27 -07:00
Roland Dreier
669ab62c9d target: Un-export target_get_sess_cmd()
There are no in-tree users of target_get_sess_cmd() outside of
target_core_transport.c.  Any new code should use the higher-level
target_submit_cmd() interface.  So let's un-export target_get_sess_cmd()
and make it static to the one file where it's actually used.

(nab: Fix up minor fuzz to for-next)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:25 -07:00
Christoph Hellwig
af8772926f target: replace the processing thread with a TMR work queue
The last functionality of the target processing thread is offloading possibly
long running task management requests from the submitter context.  To keep
TMR semantics the same we need a single threaded ordered queue, which can
be provided by a per-device workqueue with the right flags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:21 -07:00
Christoph Hellwig
f314643751 target: remove transport_generic_handle_cdb_map
Remove this command submission path which is not used by any in-tree driver.
This also removes the now unused new_cmd_map fabtric method, which a few
drivers implemented despite never calling transport_generic_handle_cdb_map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:21 -07:00
Christoph Hellwig
1389533ef9 target: remove transport_generic_handle_data
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:20 -07:00
Christoph Hellwig
70baf0ab3b target: remove transport_generic_process_write
Just call target_execute_cmd directly.  Also, convert loopback, sbp,
usb-gadget to use the newly exported target_execute_cmd().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:16 -07:00
Christoph Hellwig
14150a6bbe target: move unmap to struct spc_ops
Having all the unmap payload parsing in the backed is a bit ugly, but until
more drivers support it and we can find a good interface for all of them
that seems the way to go.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:14 -07:00
Christoph Hellwig
6f974e8ce7 target: move write_same to struct spc_ops
Add spc_ops->execute_write_same() caller for ->execute_cmd() setup,
and update IBLOCK backends to use it.

(nab: add export of spc_get_write_same_sectors symbol)
(roland: Carry forward: Fix range calculation in WRITE SAME emulation
         when num blocks == 0)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:34:41 -07:00
Christoph Hellwig
ad67f0d9e6 target: move sync_cache to struct spc_ops
Add spc_ops->execute_sync_cache() caller for ->execute_cmd() setup,
and update IBLOCK + FILEIO backends to use it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig
0c2ad7d113 target: add struct spc_ops + initial ->execute_rw pointer usage
Remove the execute_cmd method in struct se_subsystem_api, and always use the
one directly in struct se_cmd.  To make life simpler for SBC virtual backends
a struct spc_ops that is passed to sbc_parse_cmd is added.  For now it
only contains an execute_rw member, but more will follow with the subsequent
commits.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig
e1306bdab3 target: remove dead SCF_ flags
Remove the dead SCF_SE_ALLOW_EOO and SCF_DELAYED_CMD_FROM_SAM_ATTR
from se_cmd_flags_table.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig
9f3eb93eaf target: move ref_cmd from the generic se_tmr_req into iscsi code
Also remove the unused ref_task_lun field in struct se_tmr_req.

(nab: Add missing TASK_REASSIGN ref_lun vs. ref_cmd orig_fe_lun checks
      in iscsit_tmr_task_reassign)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:11 -07:00
Christoph Hellwig
5f41a31d0a target: remove the execute list
Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always
submit all commands (or back then, tasks) from __transport_execute_tasks.

That means the the execute list has lots its purpose, as we can simply
submit the commands that are restarted in transport_complete_task_attr
directly while we walk the list.  In fact doing so also solves a race
in the way it currently walks to delayed_cmd_list as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:11 -07:00
Christoph Hellwig
1fd032ee10 target: move code for CDB emulation
Move the existing code in target_core_cdb.c into the files for the command
sets that the emulations implement.

(roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation
 when num blocks == 0s)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:27:45 -07:00
Christoph Hellwig
d6e0175cf3 target: add a parse_cdb method to the backend drivers
Instead of trying to handle all SCSI command sets in one function
(transport_generic_cmd_sequencer) call out to the backend driver to perform
this functionality.  For pSCSI a copy of the existing code is used, but for
all virtual backends we can use a new parse_sbc_cdb helper is used to
provide a simple SBC emulation.

For now this setups means a fair amount of duplication between pSCSI and the
SBC library, but patches later in this series will sort out that problem.

(nab: Fix up build failure in target_core_pscsi.c)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:25:56 -07:00
Christoph Hellwig
64f1db38c6 target: remove control CDB flags
We don't need three flags to classifiy the CDB as we can check for a NULL S/G
list for a dataless command, and can infer from the absence of the data flag
that we deal with a control CDB.  Also remove the _SG_IO from the data CDB
flag as all I/O is dont on S/G lists now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:25:55 -07:00
Joern Engel
4149268e78 target: Add TFO->put_session() caller for HW fabric session shutdown
This patch adds an optional target_core_fabric_ops->put_session() caller
within the existing target_put_session() code path.

This is required by tcm_qla2xxx code in order to invoke it's own fabric
specific session shutdown handler using se_session->sess_kref.

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-12 19:33:05 -07:00
Nicholas Bellinger
5b9a4d7280 target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header
format defined within SPC-4.  It changes target core ALUA emulation logic
within target_emulate_report_target_port_groups() to support both the
extended and original length only header formats.

It includes adding a new 'implict_trans_secs' attribute for each ALUA
target port group to control the value returned to the application client
for an recommended implict translation timeout in seconds.  By default
this value is currently set to zero, and limited up to 255 by virtue of
using a single byte in the extended header format.

This value is used by target_emulate_report_target_port_groups() within
the extended header logic to set IMPLICIT TRANSITION TIME as defined by
spc4r30.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Jörn Engel
33933a0e96 target: make target_put_session void
No real change, it effectively already was.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11 15:01:52 -07:00
Nicholas Bellinger
11e764bd5e target: Remove max_sectors device attribute for modern se_task less code
This patch removes the original usage of dev_attr->max_sectors in favor of
dev_attr->hw_max_sectors that is now being enforced by target core from
within transport_generic_cmd_sequencer() for SCF_SCSI_DATA_SG_IO_CDB ops.

After the recent se_task removal patches from hch, this value for IBLOCK
backends being set via configfs by userspace from an saved max_sectors
value that is turning out to be problematic, so it makes sense to go ahead
and remove this now legacy attribute all-together.

This patch also continues to make se_dev_set_default_attribs() do
(sectors / block_size) alignment for what actually get used by
target_core_mod to be safe here, following the same alignment currently
used by fabric_max_sectors.

Reported-by: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09 15:08:47 -07:00
Christoph Hellwig
d5dc28eb92 target: remove the t_se_count field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:28 -07:00
Christoph Hellwig
d43d6aea84 target: remove the t_task_cdbs_ex_left field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:27 -07:00
Christoph Hellwig
226b6faf2e target: remove the t_task_cdbs_left field in struct se_cmd
Now that tasks are gone we are guaranteed to only get a single completion
per command, and thus don't need this counter.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:27 -07:00
Christoph Hellwig
5787cacd0b target: remove struct se_task
We can use struct se_cmd for everything it did.  Make sure to pass the S/G
list and data direction to the execution function to ease adding back BIDI
support later on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:26 -07:00
Christoph Hellwig
cf572a9627 target: move the state and execute lists to the command
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:26 -07:00
Christoph Hellwig
785fdf70b2 target: simplify command to task linkage
Now that we only have a single task per command we can use a direct pointer
to it instead of list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:25 -07:00
Christoph Hellwig
6bb35e009b target: replace ->execute_task with ->execute_cmd
Make CDB emulation work on commands instead of tasks again as a preparation
of removing tasks completely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:14 -07:00
Christoph Hellwig
bd31377878 target: remove the task_sectors field in struct se_task
Remove the task_sectors field that isn't used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:46 -07:00
Christoph Hellwig
7a83aa4e7b target: remove the task_size field in struct se_task
Now that we don't split commands the size field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the size in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:41 -07:00
Christoph Hellwig
72a0e5e2e2 target: remove the task_lba field in struct se_task
Now that we don't split commands the lba field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the lba in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Christoph Hellwig
ed3102c678 target: remove target_get_task_cdb
Now that tasks are always the same size as the command there is no need
to rewrite a CDB in common code.  Notw that we keep the separately allocated
CDB in the pscsi and stgt backends for now, to easy reintroducing any
command splitting local to these backends if nessecary.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Andy Grover
a12f41f841 target: Rename target_allocate_tasks to target_setup_cmd_from_cdb
This patch renames a horribly misnamed function that no longer allocate
tasks to something more descriptive for it's modern use in target core.

(nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd
conversion)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:36 -07:00
Roland Dreier
957525a242 target: Remove transport_do_task_sg_chain() and associated detritus
Now that all fabrics are converted over to using se_cmd->t_data_sg
directly, we can drop the task sg chaining support.  With the modern
memory allocation in target core, task sg chaining is needless
overhead -- we would split up the main cmd sglist into pieces, and
then splice those pieces back together instead of just using the
original list directly.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:32 -07:00
Sebastian Andrzej Siewior
b0d7994660 target: add unknown size flag to target_submit_cmd()
The UASP protocol does not inform the target device upfront how much
data it should expect so we have to learn in from the CDB.  So in order
to handle this case, add a TARGET_SCF_UNKNOWN_SIZE to target_submit_cmd()
and perform an explictly assignment for se_cmd->data_length from the
extracted CDB size in transport_generic_cmd_sequencer().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:03 -07:00
Nicholas Bellinger
58d9261877 target: Remove obsolete DF_READ_ONLY usage
This was used at one time as a hack by FILEIO backend registration to
allow a struct block_device that was claimed with blkdev_get (by a local
filesystem mount for example) to be exported as read-only (SCSI WP=1).

Since FILEIO backend registration will no longer attempt to obtain
exclusive access to an underlying struct block_device here, this flag is
now obsolete.

Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 16:04:58 -07:00
Jörn Engel
f2083241f2 target: Use array_zalloc for device_list
Turns an order-8 allocation into slab-sized ones, thereby preventing
allocation failures with memory fragmentation.

This likely saves memory as well, as the slab allocator can pack objects
more tightly than the buddy allocator.

(nab: Fix lio-core patch fuzz)

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:15:51 -07:00
Jörn Engel
4a5a75f32d target: Use array_zalloc for tpg_lun_list
Turns an order-10 allocation into slab-sized ones, thereby preventing
allocation failures with memory fragmentation.

This likely saves memory as well, as the slab allocator can pack objects
more tightly than the buddy allocator.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:15:38 -07:00
Nicholas Bellinger
9765b1f327 target: Bump core version to v4.1.0-rc2-ml + fabric versions
Bump core version to v4.1.0-rc2-ml, and for versions from the
following mainline fabric modules:

loopback: v2.1-rc2
tcm_fc: v0.4
iscsi-target: v4.1.0-rc2

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:55:17 -08:00
Nicholas Bellinger
c7ec05c82b target: Drop unused legacy target_core_fabric_ops API callers
This patch drops the following unused legacy API callers from target_core_fabric.h:

*) TFO->fall_back_to_erl0()
*) TFO->stop_session()
*) TFO->sess_logged_in()
*) TFO->is_state_remove()

This patch also removes the stub usage in loopback, tcm_fc, iscsi_target,
and ib_srpt fabric modules.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:55 -08:00
Nicholas Bellinger
337c060701 target: Convert se_node_acl->acl_group removal to use ->acl_kref
This patch converts core_tpg_del_initiator_node_acl() shutdown from configfs
context to use se_node_acl->acl_kref and ->acl_free_comp in order to wait for
outstanding fabric callbacks to complete via transport_deregister_session()
callbacks before waking ->acl_free_comp from the last ->acl_kref put.

It also changes core_tpg_del_initiator_node_acl() to setup a local sess_list
with target_get_session() + acl->acl_stop = 1 for active sessions that will
be shutdown, and changes transport_deregister_session_configfs() to check
for ->acl_stop usage.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:19 -08:00
Nicholas Bellinger
afb999ffc4 target: Add se_node_acl->acl_kref for ->acl_free_comp usage
This patch adds se_node_acl->acl_kref for use with ->acl_free_comp
during explict se_node_acl release.  It adds kref_init() during
se_node_acl setup, kref_get() during __transport_register_session()
-> target_put_nacl() with existing transport_deregister_session()
fabric callback usage.

It also moves transport_free_session() to release *se_sess memory
after target_put_nacl() execution in transport_deregister_session()

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:09 -08:00
Nicholas Bellinger
0146834654 target: Add se_node_acl->acl_free_comp for NodeACL release path
Add se_node_acl->acl_free_comp for NodeACL release path to wait for outstanding
fabric session shutdown to complete in transport_deregister_session() before
finishing NodeACL release from configfs process context.

Also make transport_deregister_session() clear the comp_nacl bit
to skip se_node_acl->acl_free_comp completion for dynamically generated
NodeACL during fabric session shutdown.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:41:59 -08:00
Nicholas Bellinger
41ac82b668 target: Add se_sess->sess_kref + get/put helpers
This patch adds basic se_session->sess_kref and get/put helpers for fabric
session reference counting.  It sets the initial kref in transport_init_session()
and adds a target_release_session() callback to invoke TFO->close_session()
for final session shutdown.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:41:53 -08:00
Nicholas Bellinger
c0974f8938 target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tag
This patch allows target_submit_tmr() to pass gfp_t for se_cmd->se_tmr_req
allocation, and also set up se_cmd->se_tmr_req->ref_task_tag for passed
tag with TMR_ABORT_TASK.

Also update tcm_fc(fcoe) parameter usgae and add ref_task_tag FIXME
for TMR_ABORT_TASK usage,

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:39:13 -08:00
Nicholas Bellinger
c7042cae58 target: Fix target_submit_tmr se_tmr_req allocation failures
This patch makes target_submit_tmr() se_tmr_req allocation occur before
target_get_sess_cmd(), and changes target_submit_tmr() to return a failure
w/ non zero status to the fabric caller upon core_tmr_alloc_req() failure.

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:38:34 -08:00
Roland Dreier
015487b89f target: Untangle front-end and back-end meanings of max_sectors attribute
se_dev_attrib.max_sectors currently has two independent meanings:

 - It is reported in the block limits VPD page as the maximum transfer
   length, ie the largest IO that the front-end (fabric) can handle.
   Also the target core doesn't enforce this maximum transfer length.

 - It is used to hold the size of the largest IO that the back-end can
   handle, so we know when to split SCSI commands into multiple tasks.

Fix this by adding a new se_dev_attrib.fabric_max_sectors to hold the
maximum transfer length, and checking incoming IOs against that limit.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Roland Dreier
d95b82461c target: Fix up handling of short INQUIRY buffers
If the initiator sends us an INQUIRY command with an allocation length
that's shorter than what we want to return, we're simply supposed to
truncate our response and return what the initiator gave us space for,
without signaling any error.  Current target code has various tests that
don't fill out the full response if the buffer is too short and
sometimes return errors incorrectly.

Fix this up by allocating a bounce buffer for INQUIRY responses if we
need to, ie if we have cmd->data_length too small as well as
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC set in cmd->se_cmd_flags -- for most
fabrics, we always allocate at least a full page, but for tcm_loop we
may have a small buffer coming directly from the SCSI stack.

This lets us delete a lot of cmd->data_length checking, and also makes
our INQUIRY handling correct per SPC in a lot more cases.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00