Commit Graph

2875 Commits

Author SHA1 Message Date
Linus Torvalds
e93dd910b9 A set of device-mapper fixes for 3.12.
A few fixes for dm-snapshot, a 32 bit fix for dm-stats, a couple error
 handling fixes for dm-multipath.  A fix for the thin provisioning target
 to not expose non-zero discard limits if discards are disabled.
 
 Lastly, add two DM module parameters which allow users to tune the
 emergency memory reserves that DM mainatins per device -- this helps fix
 a long-standing issue for dm-multipath.  The conservative default
 reserve for request-based dm-multipath devices (256) has proven
 problematic for users with many multipathed SCSI devices but relatively
 little memory.  To responsibly select a smaller value users should use
 the new nr_bios tracepoint info (via commit 75afb352 "block: Add nr_bios
 to block_rq_remap tracepoint") to determine the peak number of bios
 their workloads create.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSQMVHAAoJEMUj8QotnQNaOXgIAJS6/XJKMoHfiDJ9M+XD34rZ
 Uyr9TEnubX3DKCRBiY23MUcCQn3fx6BjCGv5/c8L4jQFIuLyDi2yatqpwXcbGSJh
 G/S/y6u0Axek+ew7TS80OFop4nblW6MoKnoh9/4N55Ofa+1WvKM4ERUGjHGbauyS
 TxmLQPToCFPLYRIOZ+imd6hQuIZ1+FFdJFvi7kY9O6Llx2sLD6fWi1iruBd/Da2H
 ByMX3biGN45mSpcBzRbSC/FkJ9CRIvT9n82BDPS0o3Tllt8NaVlEDaovB7h4ncc0
 bFuT2Z3Q38B9uZ8Lj0bqdGzv3kXMLCkLo6WhWjyUt84hmDPAzRpBwt60jUqWyZs=
 =bjVp
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device-mapper fixes from Mike Snitzer:
 "A few fixes for dm-snapshot, a 32 bit fix for dm-stats, a couple error
  handling fixes for dm-multipath.  A fix for the thin provisioning
  target to not expose non-zero discard limits if discards are disabled.

  Lastly, add two DM module parameters which allow users to tune the
  emergency memory reserves that DM mainatins per device -- this helps
  fix a long-standing issue for dm-multipath.  The conservative default
  reserve for request-based dm-multipath devices (256) has proven
  problematic for users with many multipathed SCSI devices but
  relatively little memory.  To responsibly select a smaller value users
  should use the new nr_bios tracepoint info (via commit 75afb352
  "block: Add nr_bios to block_rq_remap tracepoint") to determine the
  peak number of bios their workloads create"

* tag 'dm-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: add reserved_bio_based_ios module parameter
  dm: add reserved_rq_based_ios module parameter
  dm: lower bio-based mempool reservation
  dm thin: do not expose non-zero discard limits if discards disabled
  dm mpath: disable WRITE SAME if it fails
  dm-snapshot: fix performance degradation due to small hash size
  dm snapshot: workaround for a false positive lockdep warning
  dm stats: fix possible counter corruption on 32-bit systems
  dm mpath: do not fail path on -ENOSPC
2013-09-25 15:12:46 -07:00
Kent Overstreet
c0f04d88e4 bcache: Fix flushes in writeback mode
In writeback mode, when we get a cache flush we need to make sure we
issue a flush to the backing device.

The code for sending down an extra flush was wrong - by cloning the bio
we were probably getting flags that didn't make sense for a bare flush,
and also the old code was firing for FUA bios, for which we don't need
to send a flush to the backing device.

This was causing data corruption somehow - the mechanism was never
determined, but this patch fixes it for the users that were seeing it.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
84786438ed bcache: Fix for handling overlapping extents when reading in a btree node
btree_sort_fixup() was overly clever, because it was trying to avoid
pulling a key off the btree iterator in more than one place.

This led to a really obscure bug where we'd break early from the loop in
btree_sort_fixup() if the current key overlapped with keys in more than
one older set, and the next key it overlapped with was zero size.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
a698e08c82 bcache: Fix a shrinker deadlock
GFP_NOIO means we could be getting called recursively - mca_alloc() ->
mca_data_alloc() - definitely can't use mutex_lock(bucket_lock) then.
Whoops.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
79e3dab90d bcache: Fix a dumb CPU spinning bug in writeback
schedule_timeout() != schedule_timeout_uninterruptible()

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
1394d6761b bcache: Fix a flush/fua performance bug
bch_journal_meta() was missing the flush to make the journal write
actually go down (instead of waiting up to journal_delay_ms)...

Whoops

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
c2a4f3183a bcache: Fix a writeback performance regression
Background writeback works by scanning the btree for dirty data and
adding those keys into a fixed size buffer, then for each dirty key in
the keybuf writing it to the backing device.

When read_dirty() finishes and it's time to scan for more dirty data, we
need to wait for the outstanding writeback IO to finish - they still
take up slots in the keybuf (so that foreground writes can check for
them to avoid races) - without that wait, we'll continually rescan when
we'll be able to add at most a key or two to the keybuf, and that takes
locks that starves foreground IO.  Doh.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Geert Uytterhoeven
61cbd250f8 bcache: Correct printf()-style format length modifier
Fix

  drivers/md/bcache/btree.c: In function ‘bch_btree_node_read’:
  drivers/md/bcache/btree.c:259: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘size_t’

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
c426c4fd46 bcache: Fix for when no journal entries are found
The journal replay code didn't handle this case, causing it to go into
an infinite loop...

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Gabriel de Perthuis
aee6f1cfff bcache: Strip endline when writing the label through sysfs
sysfs attributes with unusual characters have crappy failure modes
in Squeeze (udev 164); later versions of udev are unaffected.

This should make these characters more unusual.

Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Kent Overstreet
6d9d21e35f bcache: Fix a dumb journal discard bug
That switch statement was obviously wrong, leading to some sort of weird
spinning on rare occasion with discards enabled...

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 14:41:43 -07:00
Mike Snitzer
e8603136cb dm: add reserved_bio_based_ios module parameter
Allow user to change the number of IOs that are reserved by
bio-based DM's mempools by writing to this file:
/sys/module/dm_mod/parameters/reserved_bio_based_ios

The default value is RESERVED_BIO_BASED_IOS (16).  The maximum allowed
value is RESERVED_MAX_IOS (1024).

Export dm_get_reserved_bio_based_ios() for use by DM targets and core
code.  Switch to sizing dm-io's mempool and bioset using DM core's
configurable 'reserved_bio_based_ios'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
2013-09-23 10:42:24 -04:00
Mike Snitzer
f47908269f dm: add reserved_rq_based_ios module parameter
Allow user to change the number of IOs that are reserved by
request-based DM's mempools by writing to this file:
/sys/module/dm_mod/parameters/reserved_rq_based_ios

The default value is RESERVED_REQUEST_BASED_IOS (256).  The maximum
allowed value is RESERVED_MAX_IOS (1024).

Export dm_get_reserved_rq_based_ios() for use by DM targets and core
code.  Switch to sizing dm-mpath's mempool using DM core's configurable
'reserved_rq_based_ios'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
2013-09-23 10:42:24 -04:00
Mike Snitzer
6cfa58573f dm: lower bio-based mempool reservation
Bio-based device mapper processing doesn't need larger mempools (like
request-based DM does), so lower the number of reserved entries for
bio-based operation.  16 was already used for bio-based DM's bioset
but mistakenly wasn't used for it's _io_cache.

Formalize difference between bio-based and request-based defaults by
introducing RESERVED_BIO_BASED_IOS and RESERVED_REQUEST_BASED_IOS.

(based on older code from Mikulas Patocka)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
2013-09-23 10:42:23 -04:00
Mike Snitzer
b60ab990cc dm thin: do not expose non-zero discard limits if discards disabled
Fix issue where the block layer would stack the discard limits of the
pool's data device even if the "ignore_discard" pool feature was
specified.

The pool and thin device(s) still had discards disabled because the
QUEUE_FLAG_DISCARD request_queue flag wasn't set.  But to avoid user
confusion when "ignore_discard" is used: both the pool device and the
thin device(s) have zeroes for all discard limits.

Also, always set discard_zeroes_data_unsupported in targets because they
should never advertise the 'discard_zeroes_data' capability (even if the
pool's data device supports it).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2013-09-23 10:42:06 -04:00
Mike Snitzer
f84cb8a46a dm mpath: disable WRITE SAME if it fails
Workaround the SCSI layer's problematic WRITE SAME heuristics by
disabling WRITE SAME in the DM multipath device's queue_limits if an
underlying device disabled it.

The WRITE SAME heuristics, with both the original commit 5db44863b6
("[SCSI] sd: Implement support for WRITE SAME") and the updated commit
66c28f971 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling
WRITE SAME(10) even without successfully determining it is supported.
After the first failed WRITE SAME the SCSI layer will disable WRITE SAME
for the device (by setting sdkp->device->no_write_same which results in
'max_write_same_sectors' in device's queue_limits to be set to 0).

When a device is stacked ontop of such a SCSI device any changes to that
SCSI device's queue_limits do not automatically propagate up the stack.
As such, a DM multipath device will not have its WRITE SAME support
disabled.  This causes the block layer to continue to issue WRITE SAME
requests to the mpath device which causes paths to fail and (if mpath IO
isn't configured to queue when no paths are available) it will result in
actual IO errors to the upper layers.

This fix doesn't help configurations that have additional devices
stacked ontop of the mpath device (e.g. LVM created linear DM devices
ontop).  A proper fix that restacks all the queue_limits from the bottom
of the device stack up will need to be explored if SCSI will continue to
use this model of optimistically allowing op codes and then disabling
them after they fail for the first time.

Before this patch:

EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.
device-mapper: multipath: Failing path 8:112.
end_request: I/O error, dev dm-6, sector 4616
dm-6: WRITE SAME failed. Manually zeroing.
end_request: I/O error, dev dm-6, sector 4616
end_request: I/O error, dev dm-6, sector 5640
end_request: I/O error, dev dm-6, sector 6664
end_request: I/O error, dev dm-6, sector 7688
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.
end_request: I/O error, dev dm-6, sector 524296
Aborting journal on device dm-6-8.
end_request: I/O error, dev dm-6, sector 524288
Buffer I/O error on device dm-6, logical block 65536
lost page write due to I/O error on dm-6
JBD2: Error -5 detected when updating journal superblock for dm-6-8.

# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
33553920

After this patch:

EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121)
device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121
end_request: critical target error, dev dm-6, sector 528
dm-6: WRITE SAME failed. Manually zeroing.

# cat /sys/block/sdh/queue/write_same_max_bytes
0
# cat /sys/block/dm-6/queue/write_same_max_bytes
0

It should be noted that WRITE SAME support wasn't enabled in DM
multipath until v3.10.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # 3.10+
2013-09-20 10:36:34 -04:00
Mikulas Patocka
60e356f381 dm-snapshot: fix performance degradation due to small hash size
LVM2, since version 2.02.96, creates origin with zero size, then loads
the snapshot driver and then loads the origin.  Consequently, the
snapshot driver sees the origin size zero and sets the hash size to the
lower bound 64.  Such small hash table causes performance degradation.

This patch changes it so that the hash size is determined by the size of
snapshot volume, not minimum of origin and snapshot size.  It doesn't
make sense to set the snapshot size significantly larger than the origin
size, so we do not need to take origin size into account when
calculating the hash size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2013-09-20 10:36:34 -04:00
Mikulas Patocka
5ea330a75b dm snapshot: workaround for a false positive lockdep warning
The kernel reports a lockdep warning if a snapshot is invalidated because
it runs out of space.

The lockdep warning was triggered by commit 0976dfc1d0
("workqueue: Catch more locking problems with flush_work()") in v3.5.

The warning is false positive.  The real cause for the warning is that
the lockdep engine treats different instances of md->lock as a single
lock.

This patch is a workaround - we use flush_workqueue instead of flush_work.
This code path is not performance sensitive (it is called only on
initialization or invalidation), thus it doesn't matter that we flush the
whole workqueue.

The real fix for the problem would be to teach the lockdep engine to treat
different instances of md->lock as separate locks.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.5+
2013-09-20 10:36:34 -04:00
Mikulas Patocka
bbf3f8cbdc dm stats: fix possible counter corruption on 32-bit systems
There was a deliberate race condition in dm_stat_for_entry() to avoid the
overhead of disabling and enabling interrupts.  The race could result in
some events not being counted on 64-bit architectures.

However, on 32-bit architectures, operations on long long variables are
not atomic, so the race condition could cause the counter to jump by 2^32.
Such jumps could be disruptive, so we need to do proper locking on 32-bit
architectures.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alasdair G. Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-18 14:41:06 -04:00
Jun'ichi Nomura
cc9d3c382b dm mpath: do not fail path on -ENOSPC
Since ENOSPC is a target-side error, dm-mpath should just pass the error
information to upper layer instead of retrying itself with path failover.
Otherwise it will end up failing all paths down while path checkers find
all paths ok.

ENOSPC can now be returned from SCSI device after commit a9d6ceb8
("[SCSI] return ENOSPC on thin provisioning failure").

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-18 14:41:06 -04:00
Linus Torvalds
26935fb06e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 4 from Al Viro:
 "list_lru pile, mostly"

This came out of Andrew's pile, Al ended up doing the merge work so that
Andrew didn't have to.

Additionally, a few fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits)
  super: fix for destroy lrus
  list_lru: dynamically adjust node arrays
  shrinker: Kill old ->shrink API.
  shrinker: convert remaining shrinkers to count/scan API
  staging/lustre/libcfs: cleanup linux-mem.h
  staging/lustre/ptlrpc: convert to new shrinker API
  staging/lustre/obdclass: convert lu_object shrinker to count/scan API
  staging/lustre/ldlm: convert to shrinkers to count/scan API
  hugepage: convert huge zero page shrinker to new shrinker API
  i915: bail out earlier when shrinker cannot acquire mutex
  drivers: convert shrinkers to new count/scan API
  fs: convert fs shrinkers to new scan/count API
  xfs: fix dquot isolation hang
  xfs-convert-dquot-cache-lru-to-list_lru-fix
  xfs: convert dquot cache lru to list_lru
  xfs: rework buffer dispose list tracking
  xfs-convert-buftarg-lru-to-generic-code-fix
  xfs: convert buftarg LRU to generic code
  fs: convert inode and dentry shrinking to be node aware
  vmscan: per-node deferred work
  ...
2013-09-12 15:01:38 -07:00
Dave Chinner
7dc19d5aff drivers: convert shrinkers to new count/scan API
Convert the driver shrinkers to the new API.  Most changes are compile
tested only because I either don't have the hardware or it's staging
stuff.

FWIW, the md and android code is pretty good, but the rest of it makes me
want to claw my eyes out.  The amount of broken code I just encountered is
mind boggling.  I've added comments explaining what is broken, but I fear
that some of the code would be best dealt with by being dragged behind the
bike shed, burying in mud up to it's neck and then run over repeatedly
with a blunt lawn mower.

Special mention goes to the zcache/zcache2 drivers.  They can't co-exist
in the build at the same time, they are under different menu options in
menuconfig, they only show up when you've got the right set of mm
subsystem options configured and so even compile testing is an exercise in
pulling teeth.  And that doesn't even take into account the horrible,
broken code...

[glommer@openvz.org: fixes for i915, android lowmem, zcache, bcache]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10 18:56:32 -04:00
Linus Torvalds
7426d62871 Add the ability to collect I/O statistics on user-defined regions of a
device-mapper device.  This dm-stats code required the reintroduction of
 a div64_u64_rem() helper, but as a separate method that doesn't slow
 down div64_u64() -- especially on 32-bit systems.
 
 Allow the error target to replace request-based DM devices
 (e.g. multipath) in addition to bio-based DM devices.
 
 Various other small code fixes and improvements to thin-provisioning, DM
 cache and the DM ioctl interface.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJSLyNnAAoJEMUj8QotnQNaXVEIAKA1l43enaGiROBZEZXgAGUY
 1JUsnHES4ujyn/jtT39jPTQf9AW/rS4FUCrZiXG2aaNHXo7+7cdVoBHAiWc7mXad
 budBSqn47W7WDyFlQarKwsuYFcdLnqdnieRDMXQ1cN5dl4Rx61LclnsylQd4SSS0
 lznXkfOTquetDSuEPOuUHJDZufdacw3PpxWbTKGJld40fd7YZfGWQoG0ek1OeqqL
 fA30DTlYnkFyhheLCjFcDY6H55Rt7QpBWOUAa2XXLR6GLfk5iFK99autjWk2xTPT
 nppRwQrw9VH+HdW0jGLU+LRs1Y3nxwT9OBLWt9wav87Smdg/7jQAjwde9eKbO2k=
 =3ooH
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device-mapper updates from Mike Snitzer:
 "Add the ability to collect I/O statistics on user-defined regions of a
  device-mapper device.  This dm-stats code required the reintroduction
  of a div64_u64_rem() helper, but as a separate method that doesn't
  slow down div64_u64() -- especially on 32-bit systems.

  Allow the error target to replace request-based DM devices (e.g.
  multipath) in addition to bio-based DM devices.

  Various other small code fixes and improvements to thin-provisioning,
  DM cache and the DM ioctl interface"

* tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm stripe: silence a couple sparse warnings
  dm: add statistics support
  dm thin: always return -ENOSPC if no_free_space is set
  dm ioctl: cleanup error handling in table_load
  dm ioctl: increase granularity of type_lock when loading table
  dm ioctl: prevent rename to empty name or uuid
  dm thin: set pool read-only if breaking_sharing fails block allocation
  dm thin: prefix pool error messages with pool device name
  dm: allow error target to replace bio-based and request-based targets
  math64: New separate div64_u64_rem helper
  dm space map: optimise sm_ll_dec and sm_ll_inc
  dm btree: prefetch child nodes when walking tree for a dm_btree_del
  dm btree: use pop_frame in dm_btree_del to cleanup code
  dm cache: eliminate holes in cache structure
  dm cache: fix stacking of geometry limits
  dm thin: fix stacking of geometry limits
  dm thin: add data block size limits to Documentation
  dm cache: add data block size limits to code and Documentation
  dm cache: document metadata device is exclussive to a cache
  dm: stop using WQ_NON_REENTRANT
2013-09-10 13:06:15 -07:00
Linus Torvalds
4d7696f1b0 md update for v3.12
Headline item is multithreading for RAID5 so that more
 IO/sec can be supported on fast (SSD) devices.
 Also TILE-Gx SIMD suppor for RAID6 calculations and an
 assortment of bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIVAwUAUi6dRTnsnt1WYoG5AQIqMBAAm/XUEqfyBNUiTPHmIU/OyReOlfsp8A2o
 xtcmSzaCtIUz4btPszUrw3PShqnk+lXXX2AB0rp3PzfOgyNYXBRKbzOf3eGr2VEp
 L/Cm0iSWHqQ7V7MoV5ZrqtvuyJV1a7FK3a3VaoKaUk424o4sZ7P67t/YZAnTCP/i
 9wQoPeIOJ8YjZsaAQjzI3q7yRMRE8ytyBnF4NdgeMyr2p17w2e9pnmNfCTo4wnWs
 Nu2wPr2QCPQXr/FoIhdIVEy3kVatqH8qXG8Fw+5n07HJYxGCvQZLDuoOVDYyFeoW
 gnNq2MMgLZm/7Nzqd1bN+QQZuBCd5JL4VJ2G4vLfYrn3ZSdSysrVKQXFKYG3Gkua
 1KP4Pv0hndAl4DtGbUk8CiZp6b+c5qeWvq+sO2NuhUGmumFMK2q4DJhITNexjmrs
 Eg4opnR8JMLDkYD6o52Ziu5KQR/q1PKRLj80eoVuqB2QQM5+NPb4s3k2WN+53lQD
 L9fH2alUxxSK+5R8ykk923QQ/XErMUwXaka+O/gGFAlYvaaW/GKTxFnKn/GIXAkc
 tKW88zB+zA5EZEFec+K43z1UjtGxMWsryvDN55ON2iV+LIZBISm7krroBeR55cyO
 +3tHlPsga0pO+9DdSm7hvZeWRrq5ZJTiZmL/e2FYygrC5tFAY0p+z49fK3e9Th13
 C85G7fg3yDY=
 =zLxh
 -----END PGP SIGNATURE-----

Merge tag 'md/3.12' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Headline item is multithreading for RAID5 so that more IO/sec can be
  supported on fast (SSD) devices.  Also TILE-Gx SIMD suppor for RAID6
  calculations and an assortment of bug fixes"

* tag 'md/3.12' of git://neil.brown.name/md:
  raid5: only wakeup necessary threads
  md/raid5: flush out all pending requests before proceeding with reshape.
  md/raid5: use seqcount to protect access to shape in make_request.
  raid5: sysfs entry to control worker thread number
  raid5: offload stripe handle to workqueue
  raid5: fix stripe release order
  raid5: make release_stripe lockless
  md: avoid deadlock when dirty buffers during md_stop.
  md: Don't test all of mddev->flags at once.
  md: Fix apparent cut-and-paste error in super_90_validate
  raid6/test: replace echo -e with printf
  RAID: add tilegx SIMD implementation of raid6
  md: fix safe_mode buglet.
  md: don't call md_allow_write in get_bitmap_file.
2013-09-10 13:03:41 -07:00
Mike Snitzer
7fff5e8f72 dm stripe: silence a couple sparse warnings
Eliminate the following sparse warnings:
drivers/md/dm-stripe.c:443:12: warning: symbol 'dm_stripe_init' was not declared. Should it be static?
drivers/md/dm-stripe.c:456:6: warning: symbol 'dm_stripe_exit' was not declared. Should it be static?

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-06 11:36:01 -04:00
Mikulas Patocka
fd2ed4d252 dm: add statistics support
Support the collection of I/O statistics on user-defined regions of
a DM device.  If no regions are defined no statistics are collected so
there isn't any performance impact.  Only bio-based DM devices are
currently supported.

Each user-defined region specifies a starting sector, length and step.
Individual statistics will be collected for each step-sized area within
the range specified.

The I/O statistics counters for each step-sized area of a region are
in the same format as /sys/block/*/stat or /proc/diskstats but extra
counters (12 and 13) are provided: total time spent reading and
writing in milliseconds.  All these counters may be accessed by sending
the @stats_print message to the appropriate DM device via dmsetup.

The creation of DM statistics will allocate memory via kmalloc or
fallback to using vmalloc space.  At most, 1/4 of the overall system
memory may be allocated by DM statistics.  The admin can see how much
memory is used by reading
/sys/module/dm_mod/parameters/stats_current_allocated_bytes

See Documentation/device-mapper/statistics.txt for more details.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer
94563badaf dm thin: always return -ENOSPC if no_free_space is set
If pool has 'no_free_space' set it means a previous allocation already
determined the pool has no free space (and failed that allocation with
-ENOSPC).  By always returning -ENOSPC if 'no_free_space' is set, we do
not allow the pool to oscillate between allocating blocks and then not.

But a side-effect of this determinism is that if a user wants to be able
to allocate new blocks they'll need to reload the pool's table (to clear
the 'no_free_space' flag).  This reload will happen automatically if the
pool's data volume is resized.  But if the user takes action to free a
lot of space by deleting snapshot volumes, etc the pool will no longer
allow data allocations to continue without an intervening table reload.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer
f11c1c5693 dm ioctl: cleanup error handling in table_load
Make use of common cleanup code.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer
00c4fc3b1f dm ioctl: increase granularity of type_lock when loading table
Hold the mapped device's type_lock before calling populate_table() since
it is where the table's type is determined based on the specified
targets.  There is no need to allow concurrent table loads to race to
establish the table's targets or type.

This eliminates the need to grab the lock in dm_table_set_type().

Also verify that the type_lock is held in both dm_set_md_type() and
dm_get_md_type().

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Alasdair Kergon
c2b0482462 dm ioctl: prevent rename to empty name or uuid
A device-mapper device must always have a name consisting of a non-empty
string.  If the device also has a uuid, this similarly must not be an
empty string.

The DM_DEV_CREATE ioctl enforces these rules when the device is created,
but this patch is needed to enforce them when DM_DEV_RENAME is used to
change the name or uuid.

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer
d6fc204201 dm thin: set pool read-only if breaking_sharing fails block allocation
break_sharing() now handles an arbitrary alloc_data_block() error
the same way as provision_block(): marks pool read-only and errors the
cell.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00
Mike Snitzer
4fa5971a69 dm thin: prefix pool error messages with pool device name
Useful to know which pool is experiencing the error.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:05 -04:00
Mike Snitzer
169e2cc279 dm: allow error target to replace bio-based and request-based targets
It may be useful to switch a request-based table to the "error" target.
Enhance the DM core to allow a hybrid target_type which is capable of
handling either bios (via .map) or requests (via .map_rq).

Add a request-based map function (.map_rq) to the "error" target_type;
making it DM's first hybrid target.  Train dm_table_set_type() to prefer
the mapped device's established type (request-based or bio-based).  If
the mapped device doesn't have an established type default to making the
table with the hybrid target(s) bio-based.

Tested 'dmsetup wipe_table' to work on both bio-based and request-based
devices.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:05 -04:00
Linus Torvalds
f66c83d059 SCSI misc on 20130903
This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas,
 qla4xxx, qla2xxx [adding support for ISP8044 + other things]) we also have a
 new driver: esas2r which has a number of static checker problems, but which I
 expect to resolve over the -rc course of 3.12 under the new driver exception.
 We also have the error return updates that were discussed at LSF.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJSJfX5AAoJEDeqqVYsXL0M8u8H+gN65iA4YeNc3Eq9F6mliLfg
 JOIfn6GRz7ChbQ1ZZKdH/5xCOtzXphrkg7kRGmr9frsvYZ4X2c7W3xweQTA08gqP
 wPH7/xyPffPnUm/r+V+SV41pm39bEjmltknLwiF572a6iOoVYQpnmDjdZQKT0jU0
 QZEqI81+646m8edCnApLw3Tlsn2gBwHaDrkd55H2IQGTkOD016C0CQbM+cNMU440
 qdqDcfRWCsp1fhLo3JH2kWTx8BihhyfEYAFz4tZwuFdGGkRZxF20HwyzV0h3hZOG
 kZ2Gd1BFf0SybxOcESQmAukbcH5hyumX1Y7HMYKZbS2ubD4MCO1MO8UUtLXlxNc=
 =PDBQ
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This patch set is a set of driver updates (ufs, zfcp, lpfc, mpt2/3sas,
  qla4xxx, qla2xxx [adding support for ISP8044 + other things]).

  We also have a new driver: esas2r which has a number of static checker
  problems, but which I expect to resolve over the -rc course of 3.12
  under the new driver exception.

  We also have the error return that were discussed at LSF"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (118 commits)
  [SCSI] sg: push file descriptor list locking down to per-device locking
  [SCSI] sg: checking sdp->detached isn't protected when open
  [SCSI] sg: no need sg_open_exclusive_lock
  [SCSI] sg: use rwsem to solve race during exclusive open
  [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0
  [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()
  [SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.
  [SCSI] qla2xxx: print MAC via %pMR.
  [SCSI] qla2xxx: Correction to message ids.
  [SCSI] qla2xxx: Correctly print out/in mailbox registers.
  [SCSI] qla2xxx: Add a new interface to update versions.
  [SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.
  [SCSI] qla2xxx: Select link initialization option bits from current operating mode.
  [SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.
  [SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 firmware doesn't provide it
  [SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, add log for normal temperature AEN
  [SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00
  [SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  [SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.
  [SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOS
  ...
2013-09-03 15:48:06 -07:00
Shaohua Li
bfc90cb093 raid5: only wakeup necessary threads
If there are not enough stripes to handle, we'd better not always
queue all available work_structs. If one worker can only handle small
or even none stripes, it will impact request merge and create lock
contention.

With this patch, the number of work_struct running will depend on
pending stripes number. Note: some statistics info used in the patch
are accessed without locking protection. This should doesn't matter,
we just try best to avoid queue unnecessary work_struct.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-09-02 10:31:29 +10:00
NeilBrown
4d77e3ba88 md/raid5: flush out all pending requests before proceeding with reshape.
Some requests - particularly 'discard' and 'read' are handled
differently depending on whether a reshape is active or not.

It is harmless to assume reshape is active if it isn't but wrong
to act as though reshape is not active when it is.

So when we start reshape - after making clear to all requests that
reshape has started - use mddev_suspend/mddev_resume to flush out all
requests.  This will ensure that no requests will be assuming the
absence of reshape once it really starts.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 16:58:44 +10:00
NeilBrown
c46501b2de md/raid5: use seqcount to protect access to shape in make_request.
make_request() access various shape parameters (raid_disks, chunk_size
etc) which might be changed by raid5_start_reshape().

If the later is called at and awkward time during the form, the wrong
stripe_head might be used.

So introduce a 'seqcount' and after finding a stripe_head make sure
there is no reason to expect that we got the wrong one.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 16:58:36 +10:00
Shaohua Li
b721420e87 raid5: sysfs entry to control worker thread number
Add a sysfs entry to control running workqueue thread number. If
group_thread_cnt is set to 0, we will disable workqueue offload handling of
stripes.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 16:56:52 +10:00
Shaohua Li
851c30c9ba raid5: offload stripe handle to workqueue
This is another attempt to create multiple threads to handle raid5 stripes.
This time I use workqueue.

raid5 handles request (especially write) in stripe unit. A stripe is page size
aligned/long and acrosses all disks. Writing to any disk sector, raid5 runs a
state machine for the corresponding stripe, which includes reading some disks
of the stripe, calculating parity, and writing some disks of the stripe. The
state machine is running in raid5d thread currently. Since there is only one
thread, it doesn't scale well for high speed storage. An obvious solution is
multi-threading.

To get better performance, we have some requirements:
a. locality. stripe corresponding to request submitted from one cpu is better
handled in thread in local cpu or local node. local cpu is preferred but some
times could be a bottleneck, for example, parity calculation is too heavy.
local node running has wide adaptability.
b. configurablity. Different setup of raid5 array might need diffent
configuration. Especially the thread number. More threads don't always mean
better performance because of lock contentions.

My original implementation is creating some kernel threads. There are
interfaces to control which cpu's stripe each thread should handle. And
userspace can set affinity of the threads. This provides biggest flexibility
and configurability. But it's hard to use and apparently a new thread pool
implementation is disfavor.

Recent workqueue improvement is quite promising. unbound workqueue will be
bound to numa node. If WQ_SYSFS is set in workqueue, there are sysfs option to
do affinity setting. For example, we can only include one HT sibling in
affinity. Since work is non-reentrant by default, and we can control running
thread number by limiting dispatched work_struct number.

In this patch, I created several stripe worker group. A group is a numa node.
stripes from cpus of one node will be added to a group list. Workqueue thread
of one node will only handle stripes of worker group of the node. In this way,
stripe handling has numa node locality. And as I said, we can control thread
number by limiting dispatched work_struct number.

The work_struct callback function handles several stripes in one run. A typical
work queue usage is to run one unit in each work_struct. In raid5 case, the
unit is a stripe. But we can't do that:
a. Though handling a stripe doesn't need lock because of reference accounting
and stripe isn't in any list, queuing a work_struct for each stripe will make
workqueue lock contended very heavily.
b. blk_start_plug()/blk_finish_plug() should surround stripe handle, as we
might dispatch request. If each work_struct only handles one stripe, such block
plug is meaningless.

This implementation can't do very fine grained configuration. But the numa
binding is most popular usage model, should be enough for most workloads.

Note: since we have only one stripe queue, switching to multi-thread might
decrease request size dispatching down to low level layer. The impact depends
on thread number, raid configuration and workload. So multi-thread raid5 might
not be proper for all setups.

Changes V1 -> V2:
1. remove WQ_NON_REENTRANT
2. disabling multi-threading by default
3. Add more descriptions in changelog

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 16:46:38 +10:00
Shaohua Li
d265d9dc1d raid5: fix stripe release order
patch "make release_stripe lockless" changes the order stripes are released.
Originally I thought block layer can take care of request merge, but it appears
there are still some requests not merged. It's easy to fix the order.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 16:36:26 +10:00
Shaohua Li
773ca82fa1 raid5: make release_stripe lockless
release_stripe still has big lock contention. We just add the stripe to a llist
without taking device_lock. We let the raid5d thread to do the real stripe
release, which must hold device_lock anyway. In this way, release_stripe
doesn't hold any locks.

The side effect is the released stripes order is changed. But sounds not a big
deal, stripes are never handled in order. And I thought block layer can already
do nice request merge, which means order isn't that important.

I kept the unplug release batch, which is unnecessary with this patch from lock
contention avoid point of view, and actually if we delete it, the stripe_head
release_list and lru can share storage. But the unplug release batch is also
helpful for request merge. We probably can delay wakeup raid5d till unplug, but
I'm still afraid of the case which raid5d is running.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-28 11:55:53 +10:00
NeilBrown
260fa034ef md: avoid deadlock when dirty buffers during md_stop.
When the last process closes /dev/mdX sync_blockdev will be called so
that all buffers get flushed.
So if it is then opened for the STOP_ARRAY ioctl to be sent there will
be nothing to flush.

However if we open /dev/mdX in order to send the STOP_ARRAY ioctl just
moments before some other process which was writing closes their file
descriptor, then there won't be a 'last close' and the buffers might
not get flushed.

So do_md_stop() calls sync_blockdev().  However at this point it is
holding ->reconfig_mutex.  So if the array is currently 'clean' then
the writes from sync_blockdev() will not complete until the array
can be marked dirty and that won't happen until some other thread
can get ->reconfig_mutex.  So we deadlock.

We need to move the sync_blockdev() call to before we take
->reconfig_mutex.
However then some other thread could open /dev/mdX and write to it
after we call sync_blockdev() and before we actually stop the array.
This can leave dirty data in the page cache which is awkward.

So introduce new flag MD_STILL_CLOSED.  Set it before calling
sync_blockdev(), clear it if anyone does open the file, and abort the
STOP_ARRAY attempt if it gets set before we lock against further
opens.

It is still possible to get problems if you open /dev/mdX, write to
it, then issue the STOP_ARRAY ioctl.  Just don't do that.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:45:00 +10:00
NeilBrown
7a0a5355cb md: Don't test all of mddev->flags at once.
mddev->flags is mostly used to record if an update of the
metadata is needed.  Sometimes the whole field is tested
instead of just the important bits.  This makes it difficult
to introduce more state bits.

So replace all bare tests of mddev->flags with tests for the bits
that actually need testing.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:28:23 +10:00
Dave Jones
c9ad020fec md: Fix apparent cut-and-paste error in super_90_validate
Setting a variable to itself probably wasn't the intention here.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:06:17 +10:00
NeilBrown
275c51c4e3 md: fix safe_mode buglet.
Whe we set the safe_mode_timeout to a smaller value we trigger a timeout
immediately - otherwise the small value might not be honoured.
However if the previous timeout was 0 meaning "no timeout", we didn't.
This would mean that no timeout happens until the next write completes,
which could be a long time.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:05:43 +10:00
NeilBrown
60559da4d8 md: don't call md_allow_write in get_bitmap_file.
There is no really need as GFP_NOIO is very likely sufficient,
and failure is not catastrophic.

Calling md_allow_write here will convert a read-auto array to
read/write which could be confusing when you are just performing
a read operation.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27 16:05:32 +10:00
Hannes Reinecke
7e782af576 [SCSI] Return ENODATA on medium error
When a medium error is detected the SCSI stack should return
ENODATA to the upper layers.

[jejb: fix whitespace error]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 12:54:53 -04:00
Joe Thornber
f722063ee0 dm space map: optimise sm_ll_dec and sm_ll_inc
Prior to this patch these methods did a lookup followed by an insert.
Instead they now call a common mutate function that adjusts the value
according to a callback function.  This avoids traversing the data
structures twice and hence improves performance.

Also factor out sm_ll_lookup_big_ref_count() for use by both
sm_ll_lookup() and sm_ll_mutate().

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00
Joe Thornber
04f17c802f dm btree: prefetch child nodes when walking tree for a dm_btree_del
dm-btree now takes advantage of dm-bufio's ability to prefetch data via
dm_bm_prefetch().  Prior to this change many btree node visits were
causing a synchronous read.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00
Joe Thornber
cd5acf0b44 dm btree: use pop_frame in dm_btree_del to cleanup code
Remove a visited leaf straight away from the stack, rather than
marking all it's children as visited and letting it get removed on the
next iteration.  May also offer a micro optimisation in dm_btree_del.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00