Commit Graph

26 Commits

Author SHA1 Message Date
Yinghai Lu
b77b881f21 x86: fix lguest used_vectors breakage, -v2
Impact: fix lguest, clean up

32-bit lguest used used_vectors to record vectors, but that model of
allocating vectors changed and got broken, after we changed vector
allocation to a per_cpu array.

Try enable that for 64bit, and the array is used for all vectors that
are not managed by vector_irq per_cpu array.

Also kill system_vectors[], that is now a duplication of the
used_vectors bitmap.

[ merged in cpus4096 due to io_apic.c cpumask changes. ]
[ -v2, fix build failure ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23 22:37:28 +01:00
Rusty Russell
0c12091d82 lguest: Guest int3 fix
Ron Minnich noticed that guest userspace gets a GPF when it tries to int3:
we need to copy the privilege level from the guest-supplied IDT to the real
IDT.  int3 is the only common case where guest userspace expects to invoke
an interrupt, so that's the symptom of failing to do this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-29 09:58:31 +10:00
Rusty Russell
a6bd8e1303 lguest: comment documentation update.
Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-03-28 11:05:54 +11:00
Glauber de Oliveira Costa
382ac6b3fb lguest: get rid of lg variable assignments
We can save some lines of code by getting rid of
*lg = cpu... lines of code spread everywhere by now.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:18 +11:00
Glauber de Oliveira Costa
ae3749dcd8 lguest: move changed bitmap to lg_cpu
events represented in the 'changed' bitmap are per-cpu, not per-guest.
move it to the lg_cpu structure

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:17 +11:00
Glauber de Oliveira Costa
1713608f28 lguest: per-vcpu lguest pgdir management
this patch makes the pgdir management per-vcpu. The pgdirs pool
is still guest-wide (although it'll probably need to grow when we
are really executing more vcpus), but the pgdidx index is gone,
since it makes no sense anymore. Instead, we use a per-vcpu
index.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:14 +11:00
Glauber de Oliveira Costa
4665ac8e28 lguest: makes special fields be per-vcpu
lguest struct have room for some fields, namely, cr2, ts, esp1
and ss1, that are not really guest-wide, but rather, vcpu-wide.

This patch puts it in the vcpu struct

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:13 +11:00
Glauber de Oliveira Costa
66686c2ab0 lguest: per-vcpu lguest task management
lguest uses tasks to control its running behaviour (like sending
breaks, controlling halted state, etc). In a per-vcpu environment,
each vcpu will have its own underlying task. So this patch
makes the infrastructure for that possible

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:12 +11:00
Glauber de Oliveira Costa
fc708b3e40 lguest: replace lguest_arch with lg_cpu_arch.
The fields found in lguest_arch are not really per-guest,
but per-cpu (gdt, idt, etc). So this patch turns lguest_arch
into lg_cpu_arch.

It makes sense to have a per-guest per-arch struct, but this
can be addressed later, when the need arrives.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:11 +11:00
Glauber de Oliveira Costa
a53a35a8b4 lguest: make registers per-vcpu
This is the most obvious per-vcpu field: registers.

So this patch moves it from struct lguest to struct vcpu,
and patch the places in which they are used, accordingly

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:11 +11:00
Glauber de Oliveira Costa
177e449dc5 lguest: per-vcpu interrupt processing.
This patch adapts interrupt processing for using the vcpu struct.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:09 +11:00
Glauber de Oliveira Costa
ad8d8f3bc6 lguest: per-vcpu lguest timers
Here, I introduce per-vcpu timers. With this, we can have
local expiries, needed for accounting time in smp guests

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:08 +11:00
Rusty Russell
e1e72965ec lguest: documentation update
Went through the documentation doing typo and content fixes.  This
patch contains only comment and whitespace changes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25 15:02:50 +10:00
Rusty Russell
2d37f94a28 generalize lgread_u32/lgwrite_u32.
Jes complains that page table code still uses lgread_u32 even though
it now uses general kernel pte types.  The best thing to do is to
generalize lgread_u32 and lgwrite_u32.

This means we lose the efficiency of getuser().  We could potentially
regain it if we used __copy_from_user instead of copy_from_user, but
I'm not certain that our range check is equivalent to access_ok() on
all platforms.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jes Sorensen <jes@sgi.com>
2007-10-23 15:49:56 +10:00
Rusty Russell
47436aa4ad Boot with virtual == physical to get closer to native Linux.
1) This allows us to get alot closer to booting bzImages.

2) It means we don't have to know page_offset.

3) The Guest needs to modify the boot pagetables to create the
   PAGE_OFFSET mapping before jumping to C code.

4) guest_pa() walks the page tables rather than using page_offset.

5) We don't use page_offset to figure out whether to emulate: it was
   always kinda quesationable, and won't work for instructions done
   before remapping (bzImage unpacking in particular).

6) We still want the kernel address for tlb flushing: have the initial
   hypercall give us that, too.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:54 +10:00
Rusty Russell
c18acd73ff Allow guest to specify syscall vector to use.
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).

This patch allows Guests to specify what system call vector they want,
and we try to reserve it.  We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:53 +10:00
Jes Sorensen
625efab1cd Move i386 part of core.c to x86/core.c.
Separate i386 architecture specific from core.c and move it to
x86/core.c and add x86/lguest.h header file to match.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Rusty Russell
56adbe9ddc Make shadow IDT a complete IDT with 256 entries.
This simplifies the code a little, in preparation for allowing
alternate system call vectors in guests (Plan 9 uses 0x40).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Rusty Russell
8057d763ed Fix lguest page-pinning logic ("lguest: bad stack page 0xc057a000")
If the stack pointer is 0xc057a000, then the first stack page is at
0xc0579000 (the stack pointer is decremented before use).  Not
calculating this correctly caused guests with CONFIG_DEBUG_PAGEALLOC=y
to be killed with a "bad stack page" message: the initial kernel stack
was just proceeding the .smp_locks section which
CONFIG_DEBUG_PAGEALLOC marks read-only when freeing.

Thanks to Frederik Deweerdt for the bug report!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-30 09:58:22 -07:00
Rusty Russell
0d027c01cd lguest: Fix Malicious Guest GDT Host Crash
If a Guest makes hypercall which sets a GDT entry to not present, we
currently set any segment registers using that GDT entry to 0.
Unfortunately, this is not sufficient: there are other ways of
altering GDT entries which will cause a fault.

The correct solution to do what Linux does: let them set any GDT value
they want and handle the #GP when popping causes a fault.  This has
the added benefit of making our Switcher slightly more robust in the
case of any other bugs which cause it to fault.

We kill the Guest if it causes a fault in the Switcher: it's the
Guest's responsibility to make sure it's not using segments when it
changes them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:14:56 -07:00
Rusty Russell
6c8dca5d53 Provide timespec to guests rather than jiffies clock.
A non-periodic clock_event_device and the "jiffies" clock don't mix well:
tick_handle_periodic() can go into an infinite loop.

Currently lguest guests use the jiffies clock when the TSC is
unusable.  Instead, make the Host write the current time into the lguest
page on every interrupt.  This doesn't cost much but is more precise
and at least as accurate as the jiffies clock.  It also gets rid of
the GET_WALLCLOCK hypercall.

Also, delay setting sched_clock until our clock is set up, otherwise
the early printk timestamps can go backwards (not harmful, just ugly).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-28 19:54:33 -07:00
Rusty Russell
f56a384e98 lguest: documentation VII: FIXMEs
Documentation: The FIXMEs

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Rusty Russell
bff672e630 lguest: documentation V: Host
Documentation: The Host

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:17 -07:00
Rusty Russell
f938d2c892 lguest: documentation I: Preparation
The netfilter code had very good documentation: the Netfilter Hacking HOWTO.
Noone ever read it.

So this time I'm trying something different, using a bit of Knuthiness.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:16 -07:00
Rusty Russell
e5faff45b3 lguest: fix sense if IF flag on interrupt injection
The sense of the IF bit is backwards in the host interrupt handling.

This means we always save "IF=1" on the stack when injecting an
interrupt.  It turns out this is almost always correct (unless the
guest is taking a page fault in an interrupt due to an unpopulated
vmalloc mapping), so went unnoticed.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20 09:05:16 -07:00
Rusty Russell
d7e28ffe6c lguest: the host code
This is the code for the "lg.ko" module, which allows lguest guests to
be launched.

[akpm@linux-foundation.org: update for futex-new-private-futexes]
[akpm@linux-foundation.org: build fix]
[jmorris@namei.org: lguest: use hrtimers]
[akpm@linux-foundation.org: x86_64 build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00