On ISDB-T, each layer can have its own independent modulation,
applied to the carriers that belong to the segments associated
with them. So, there's no sense to define a global modulation
parameter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The ISDB-T differs on its way to implement the hierarchical
transmissions: instead of using a low-priority/high-priority
FEC codes, it does that by using different layers, each layer
with their groups of segments. So, those parameters don't make sense
for ISDB-T.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The units for DTV_FREQUENCY are kHz for satellital delivery systems
(DVB-S/DVB-S2/DVB-TURBO/ISDB-S). Fix it at the API spec.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mark info.type as deprecated inside the header, recommending
the usage of DTV_ENUM_DELSYS DVBv5 command instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of using the same delivery system for both Annex A and
Annex C, split them into two separate ones. This helps to support
devices that only support Annex A.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
DVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between
Annex A and Annex C is that Annex C uses a subset of the modulation
types, and uses a different rolloff factor. A different rolloff means
that the bandwidth required is slicely different, and may affect the
saw filter configuration at the tuners. Also, some demods have different
configurations, depending on using Annex A or Annex C.
So, allow userspace to specify it, by changing the rolloff factor.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
- Move voltage and tone to DVB-S.
- Add turbo code.
- In DVB-S2 and turbo code sections, refer to DVB-S, as both
are extensions to DVB-S.
- Add modulation to DVB-S2.
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move generic stuff into gen-errors.xml, and remove them from
DVB API. While here, removes two bogus error codes that aren't
supported or used on Linux: EINTERNAL and ENOSIGNAL.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove generic errors from ioctl() descriptions. For other ioctl's,
there's no generic section. So, just keep whatever is there.
Also remove the EINTERNAL error code, as no DVB driver returns
it, and this error code is not defined on POSIX or on Linux.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Just like the V4L, MC and LIRC API's, point to the generic error
chapter for ioctl's. This will allow moving generic error codes
to just one place inside all media API's.
A latter patch will remove the generic errors from each specific
ioctl.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The patch utility doesn't work with non-binary files. This causes some
tools to break, like generating tarball targets and the scripts that
generate diff patches at http://www.kernel.org/pub/linux/kernel/v2.6/.
So, let's convert all binaries to ascii using base64, and add a
logic at Makefile to convert them back into binaries at runtime.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now, all data structures are commented. A few ioctls remain undocumented:
Error: no ID for constraint linkend: VIDEO_GET_SIZE.
Error: no ID for constraint linkend: VIDEO_GET_FRAME_RATE.
Error: no ID for constraint linkend: VIDEO_GET_PTS.
Error: no ID for constraint linkend: VIDEO_GET_FRAME_COUNT.
Error: no ID for constraint linkend: VIDEO_COMMAND.
Error: no ID for constraint linkend: VIDEO_TRY_COMMAND.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The av7110 uses an OSD API. Such API is not documented at all. Also,
the osd.h API uses camelCase and some other weird stuff. Also, dvb-core
doesn't recognize it.
I don't see any good reason why we should document it. It seems better
to just let it as-is. If ever needed, it is probably better to write
a different API for dvb-core.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There's no documentation at all for the DVB net API. Still, better to
remove a few warnings about the missing symbols. So, add the net data
structure inside the net.xml. Now, only the ioctl documentation is missed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Still, there are a few ioctl's not documented:
Error: no ID for constraint linkend: DMX_GET_PES_PIDS.
Error: no ID for constraint linkend: DMX_GET_CAPS.
Error: no ID for constraint linkend: DMX_SET_SOURCE.
Error: no ID for constraint linkend: DMX_ADD_PID.
Error: no ID for constraint linkend: DMX_REMOVE_PID.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make the reference links at dmx.h.xml to match the ones at demux.xml.
While here, also syncronizes the structures defined inside the API,
in order to match the current API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make sure that both ca.h.xml and ca.xml will match the same names for
the sections/links.
This way, it is now possible to identify API spec gaps:
Error: no ID for constraint linkend: ca-pid.
Error: no ID for constraint linkend: ca-pid.
Error: no ID for constraint linkend: CA_RESET.
Error: no ID for constraint linkend: CA_GET_CAP.
Error: no ID for constraint linkend: CA_GET_SLOT_INFO.
Error: no ID for constraint linkend: CA_GET_DESCR_INFO.
Error: no ID for constraint linkend: CA_GET_MSG.
Error: no ID for constraint linkend: CA_SEND_MSG.
Error: no ID for constraint linkend: CA_SET_DESCR.
Error: no ID for constraint linkend: CA_SET_PID.
Basically, in this case, no CA ioctl is described at the specs, and one
file structure (ca-pid) is missing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Although this ioctl is only used at the av7110 driver, it is not
described at the API docbook. Yet, AUDIO_PAUSE ioctl description
somewhat describes it. Fill the gap by using the information there
and by looking inside av7110 implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some attributes suffered some changes since DVBv1. Sync them with the
current API header files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make sure that both audio.h.xml and audio.xml will match the same names.
This way, it is now possible to identify API spec gaps:
Error: no ID for constraint linkend: AUDIO_CONTINUE.
Error: no ID for constraint linkend: AUDIO_GET_PTS.
Error: no ID for constraint linkend: AUDIO_BILINGUAL_CHANNEL_SELECT.
While here, fix the cut-and-paste description error on AUDIO_SET_KARAOKE.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the remaining:
Error: no ID for constraint linkend:
With this patch, the dvb frontend API matches the current
dvb core implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of repeating duplicate parameters to each delivery system,
just add a section for each specific delivery system, showing
what's applicable to each case. This helps userspace app developers
to know what DVB parameters are applicable to each delivery system.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The old way of setting delivery system parameters were to use
an union with specific per-system parameters. However, as newer
delivery systems required more data, the structure size weren't
enough to fit. So, recomend using the DVBS2API instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Put the parameters at the sequencial order as they appear inside
the frontend.h header.
TODO: fix the per-standard section, to reflect the parameters
that should actually be used for each transmission system type.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There were lots of DVB S2API parameters that were never documented.
Let's add a definition for all of them, based on what's currently
used inside the core and the drivers.
The description here is not complete nor perfect, so patches
improving it are welcome.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The frontend.h.xml now references to the main document. However,
several references are missed.
Links the trivial ones with the corresponding API descriptions.
While here, updates the main API to reflect the API improvements.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As the DVB API provides two ways to specify the delivery
systems, correlate both ways into a table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The fe_type_t documentation was incomplete and not linked to the
dvb/frontend.h.xml. Properly document it.
Also, drop a note that newer formats are only supported via
FE_GET_PROPERTY/FE_GET_SET_PROPERTY ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch addresses several issues pointed by Randy Dunlap
<rdunlap@xenotime.net> at changeset ece722c:
- In the generated index.html file, "media" is listed first, but it
should be listed in alphabetical order, not first.
- The generated files are (hidden) in .tmpmedia/
- The link from the top-level index.html file to "media" is to
media/index.html, but the file is actually in .tmpmedia/media/index.html
- Please build docs with and without using "O=builddir" and test that.
- Would it be possible for media to have its own Makefile instead of
merging into this one?
Due to the way cleandocs target works, I had to rename the media DocBook
to media_api, otherwise cleandocs would remove the /media directory.
Thanks-to: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
