The rotr, seh and wsbh instructions have been introduced with the R2
ISA. Thus the current BPF code fails to build on pre-R2 little endian
CPUs:
CC arch/mips/net/bpf_jit.o
AS arch/mips/net/bpf_jit_asm.o
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages:
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
/home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12'
/home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed
Fix that by providing equivalent code for these CPUs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: stable@vger.kernel.org # v4.2+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11098/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Support for Wolfson Microelectronics devices is now part of Cirrus Logic
and the relevant parts of the old opensource.wolfsonmicro.com site have
moved to the Cirrus Logic GitHub area.
This patch updates the website and git repo links, and also removes an
obsolete website link for the voltage and current drivers.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
XTFPGA SPI controller has native endian registers.
Fix register acessors so that they work in big-endian configurations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The split of the 8250 driver into a 8250_base/8250.ko resulted in a
lack of a license for the 8250_base.ko module. This caused the module
to fail to load and the kernel to be tainted. Add the appropriate
MODULE_LICENSE to 8250_port.c, which is always compiled into
8250_base.ko
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chanwoo writes:
Update extcon for v4.3-rc3
This patches fix the following one issue:
- Fix bug of the is_extcon_changed() which check whether specific cable is
attached or detached.
When a trace recorded on a 32-bit device is processed with a 64-bit
binary, the higher 32-bits of the address need to ignored.
The lack of this results in the output of the 64-bit pointer
value to the trace as the 32-bit address lookup fails in find_printk().
Before:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: 2cec5c058d98c
After:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: RT throttling activated
The problem occurs in PRINT_FIELD when the field is recognized as a
pointer to a string (of the type const char *)
Heterogeneous architectures cases below can arise and should be handled:
* Traces recorded using 32-bit addresses processed on a 64-bit machine
* Traces recorded using 64-bit addresses processed on a 32-bit machine
Reported-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.
By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:
Before, every make invokation would run the feature detection:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... get_cpuid: [ on ]
... bpf: [ on ]
GEN perf-archive
GEN perf-with-kcore
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
make: Leaving directory '/home/git/linux/tools/perf'
$
Because we now have two different feature detection state files:
$ ls -la /tmp/build/perf/FEATURE-DUMP*
-rw-rw-r--. 1 acme acme 338 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP
-rw-rw-r--. 1 acme acme 33 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP.libbpf
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-s6ev9wfqy7pvvs58emys2g90@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.
As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.
v2: Fix comment describing the FEATURE_DUMP filename to make sure where
it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
Pointed out by Jiri.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).
Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
After, with FEATURE_TESTS == FEATURE_DISPLAY:
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut'n'paste mistake, it should eval the name of the function
defined right next to it, in the next line, fix it.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 58d4f00ff1 ("perf build: Fix feature_check name clash")
Link: http://lkml.kernel.org/n/tip-dzu1c4sruukgfq5d5b1c4r30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current behavior of notifying CQM events is inconsistent:
Upon first configuration there is a cqm event with the current
status according to threshold configured, regardless of signal
stability.
When there is reconfiguration no event is sent unless there is
a significant change to the signal level according to the new
configuration.
Since the current reconfiguration behavior might cause missing
CQM events in case the current signal did not change but is on
the other side of the new threshold, fix that by resetting the
stored signal level upon reconfiguration.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT MCS mask has 9 bytes, the VHT one only has 8 streams.
Split the loops to handle this correctly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't check if timer is running with a timer_pending() before
deleting it with del_timer_sync(), this defies the whole point of
the sync part and can cause a possible race.
Instead we just want to make sure the timer is initialized early enough
before we have a chance to delete it.
Cc: <stable@vger.kernel.org>
Reported-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.
xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_stop will be called twice, once for the shared hcd
and again for the primary hcd.
We stop the XHCI controller in any case so clean up
everything on the first call else we can timeout
waiting for pending requests to complete.
Cc: <stable@vger.kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bits 1:0 of the bmAttributes are used for the burst multiplier.
The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7
into use.
Use the existing USB_SS_MULT() macro instead to make sure the mult value
and hence max packet calculations are correct for USB3.1 devices.
Note that burst multiplier in bmAttributes is zero based and that
the USB_SS_MULT() macro adds one.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe writes:
usb: fixes for v4.3-rc3
Here's the second pull request for current -rc cycle.
A few fixes on dummy_hcd which have been around for
longer than they should be.
MUSB got a couple fixes, the most important of which
is a fix to DMA channel teardown on AM335x devices.
And DWC3 got a minor fix for when using RT-enabled
kernels.
Pull cgroup fixes from Tejun Heo:
"The threadgroup locking changes which went in during 4.2 devel cycle
added write locking of a percpu_rwsem in cgroup task migration path;
unfortunately, that involved expedited rcu syncing which turned out to
be too slow and heavy for certain workloads. The patchset which is
dependent on this one didn't get committed during that devel cycle, so
these two patches can be reverted safely.
Oleg reworked percpu_rwsem for 4.4 so that the writer path is a lot
lighter. The reported issue goes away with Oleg's reworked
percpu_rwsem and I'll reapply these patches on the for-4.4 branch so
that they can land together with Oleg's changes"
* 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem"
Revert "cgroup: simplify threadgroup locking"
Before allowing lockless LISTEN processing, we need to make
sure to arm the SYN_RECV timer before the req socket is visible
in hash tables.
Also, req->rsk_hash should be written before we set rsk_refcnt
to a non zero value.
Fixes: fa76ce7328 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ying Cai <ycai@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating a timewait socket, we need to arm the timer before
allowing other cpus to find it. The signal allowing cpus to find
the socket is setting tw_refcnt to non zero value.
As we set tw_refcnt in __inet_twsk_hashdance(), we therefore need to
call inet_twsk_schedule() first.
This also means we need to remove tw_refcnt changes from
inet_twsk_schedule() and let the caller handle it.
Note that because we use mod_timer_pinned(), we have the guarantee
the timer wont expire before we set tw_refcnt as we run in BH context.
To make things more readable I introduced inet_twsk_reschedule() helper.
When rearming the timer, we can use mod_timer_pending() to make sure
we do not rearm a canceled timer.
Note: This bug can possibly trigger if packets of a flow can hit
multiple cpus. This does not normally happen, unless flow steering
is broken somehow. This explains this bug was spotted ~5 months after
its introduction.
A similar fix is needed for SYN_RECV sockets in reqsk_queue_hash_req(),
but will be provided in a separate patch for proper tracking.
Fixes: 789f558cfb ("tcp/dccp: get rid of central timewait timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ying Cai <ycai@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
`ls /sys/devices/channel-devices/vnet-port-0-0/net' is missing without
this change, and applications like NetworkManager are looking in
sysfs for the information.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code handling vlan tag insertion was dropped in commit 371bd1061d
("geneve: Consolidate Geneve functionality in single module."). Now we
need to drop the related vlan feature bits in the netdev structure.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a bunch of cheap USB 10/100 devices based on QinHeng chipsets. The
vendor driver supports the CH9100 and CH9200 devices, but the majority of
the code is of the if (ch9100) {} else {} form, with the most significant
difference being that CH9200 provides a real MII interface but CH9100 fakes
one with a bunch of global variables and magic commands. I don't have a
CH9100, so it's probably better if someone who does provides an independent
driver for it. In any case, this is a lightly cleaned up version of the
vendor driver with all the CH9100 code dropped.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luis de Bethencourt says:
====================
net: phy: Fix module autoload for OF platform drivers
These patches add the missing MODULE_DEVICE_TABLE() for OF to export
the information so modules have the correct aliases built-in and
autoloading works correctly.
A longer explanation by Javier Canillas can be found here:
https://lkml.org/lkml/2015/7/30/519
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luis de Bethencourt says:
====================
net: Fix module autoload for OF platform drivers
These patches add the missing MODULE_DEVICE_TABLE() for OF to export
the information so modules have the correct aliases built-in and
autoloading works correctly.
A longer explanation by Javier Canillas can be found here:
https://lkml.org/lkml/2015/7/30/519
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@osg.samsung.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a segfault bug and a small mistake in perf probe -d.
Since the "ulist" in perf_del_probe_events is never initialized,
strlist__add(ulist, *) always causes a segfault when removing
uprobe events by perf probe -d.
Also, the "str" local variable is never released if fail to
allocate the "klist". This fixes it too.
This has been introduced by the commit e607f1426b ("perf probe:
Print deleted events in cmd_probe()").
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150916125241.4446.44805.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
