Commit Graph

258 Commits

Author SHA1 Message Date
Linus Torvalds
56a9ccb7ba Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6: (30 commits)
  bq20z75: Fix time and temp units
  bq20z75: Fix issues with present and suspend
  z2_battery: Fix count of properties
  s3c_adc_battery: Fix method names when PM not set
  z2_battery: Add MODULE_DEVICE_TABLE
  ds2782_battery: Add MODULE_DEVICE_TABLE
  bq20z75: Add MODULE_DEVICE_TABLE
  power_supply: Update power_supply_is_watt_property
  bq20z75: Add i2c retry mechanism
  bq20z75: Add optional battery detect gpio
  twl4030_charger: Make the driver atomic notifier safe
  bq27x00: Use single i2c_transfer call for property read
  bq27x00: Cleanup bq27x00_i2c_read
  bq27x00: Minor cleanups
  bq27x00: Give more specific reports on battery status
  bq27x00: Add MODULE_DEVICE_TABLE
  bq27x00: Add new properties
  bq27x00: Poll battery state
  bq27x00: Cache battery registers
  bq27x00: Add bq27000 support
  ...
2011-03-25 21:00:29 -07:00
Haojian Zhuang
3154c34469 mfd: Adopt mfd_data in 88pm860x led
Copy 88pm860x platform data into different mfd_data structure for
led driver. So move the identification of device node from led
driver to mfd driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:06 +01:00
Andres Salomon
4ec1b54c4d mfd: mfd_cell is now implicitly available to mc13xxx drivers
The cell's platform_data is now accessed with a helper function;
change clients to use that, and remove the now-unused data_size.

Note that mfd-core no longer makes a copy of platform_data, but the
mc13xxx-core driver creates the pdata structures on the stack.  In
order to get around that, the various ARM mach types that set the
pdata have been changed to hold the variable in static (global) memory.
Also note that __initdata references in aforementioned pdata structs
have been dropped.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:54 +01:00
Vasiliy Kulikov
ccd7510fd8 drivers/leds/leds-lp5523.c: world-writable engine* sysfs files
Don't allow everybody to change LED settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Vasiliy Kulikov
67d1da79b2 drivers/leds/leds-lp5521.c: world-writable sysfs engine* files
Don't allow everybody to change LED settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Uwe Kleine-König
9517f925f2 leds: make *struct gpio_led_platform_data.leds const
And fix a typo.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Shreshtha Kumar Sahu
b1e6b7068f leds: add driver for LM3530 ALS
Simple backlight driver for National Semiconductor LM3530.  Presently only
manual mode is supported, PWM and ALS support to be added.

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Mark Brown
551ea73838 leds: convert bd2802 driver to dev_pm_ops
There is a move to deprecate bus-specific PM operations and move to using
dev_pm_ops instead in order to reduce the amount of boilerplate code in
buses and facilitiate updates to the PM core.  Do this move for the bs2802
driver.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Kim Kyuwon <q1.kim@samsung.com>
Cc: Kim Kyuwon <chammoru@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:58 -07:00
Grant Likely
a314c5c004 leds/leds-gpio: merge platform_driver with of_platform_driver
Both interfaces can be driven with the same driver, and
of_platform_driver is getting removed.  This patch merges the two
driver registrations.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 01:36:39 -07:00
Vasily Khoruzhick
0b9536c957 leds: Add ability to blink via simple trigger
As blink API is now available, it's possible to add ability to blink via
simple trigger.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-31 16:30:24 +03:00
Axel Lin
d8cc667be8 leds: leds-pwm: return proper error if pwm_request failed
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Luotao Fu <l.fu@pengutronix.de>
Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 10:49:58 +10:00
Janusz Krzysztofik
cc587ece12 drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking
Replicate changes made to drivers/leds/ledtrig-backlight.c.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:06 -08:00
Janusz Krzysztofik
9f9455ae71 leds: add output inversion option to backlight trigger
Extend the LED backlight tirgger driver with an option that allows for
inverting the trigger output polarity.

With the invertion option provided, I (ab)use the backlight trigger for
driving a LED that indicates LCD display blank condtition on my Amstrad
Delta videophone.  Since the machine has no dedicated power LED, it was
not possible to distinguish if the display was blanked, or the machine was
turned off, without touching it.

The invert sysfs control is patterned after a similiar function of the GPIO
trigger driver.

[akpm@linux-foundation.org: make output match input, tighten input checking]
[akpm@linux-foundation.org: make output match input, tighten input checking]
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:06 -08:00
Arun Murthy
61a83932b8 leds-lp5521: modify the way of setting led device name
Currently the led device name is fetched from the device_type in
I2C_BOARD_INFO which comes from the platform data.  This name is in turn
used to create an entry in sysfs.

If there exists two or more lp5521 on a particular platform, the
device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe
wont be called and if used so, results in run time warning "cannot create
sysfs with same name" and hence a failure.

The name that is used to create sysfs entry is to be passed by the struct
led_platform_data.  Hence adding an element of type const char * and
change in lp5521 driver to use this name in creating the led device if
present else use the name obtained by I2C_BOARD_INFO.

Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:06 -08:00
Samu Onkalo
d4e7ad03e8 leds: lp5521: fix circular locking
Driver contained possibility for circular locking.

One lock is held by sysfs-core and another one by the driver itself.  This
happened when the driver created or removed sysfs entries dynamically.
There is no real need to do those operations.  Now all the sysfs entries
are created at probe and removed at removal.  Engine load sysfs entries
are now visible all the time.  However, access to the entries fails if the
engine is disabled or running.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:06 -08:00
Samu Onkalo
fbac0812de leds: lp5523: fix circular locking
Driver contained possibility for circular locking.

One lock is held by sysfs-core and another one by the driver itself.  This
happened when the driver created or removed sysfs entries dynamically.
There is no real need to do those operations.  Now all the sysfs entries
are created at probe and removed at removal.  Engine load and mux
configuration sysfs entries are now visible all the time.  However, access
to the entries fails if the engine is disabled or running.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:05 -08:00
Samu Onkalo
278ad4fd0e leds: leds-lp5523: modify the way of setting led device name
Currently all leds channels begins with string lp5523.  Patch adds a
possibility to provide name via platform data.  This makes it possible to
have several chips without overlapping sysfs names.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Arun Murthy <arun.murthy@stericsson.com>
Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:05 -08:00
Axel Lin
125c713525 leds: leds-pca9532 cleanups
- Remove unneeded input_free_device() after input_unregister_device().

- Add pca9532_destroy_devices() function for destroy devices.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:05 -08:00
Vasiliy Kulikov
2260209c49 drivers/leds/leds-lp5521.c: fix potential buffer overflow
The code doesn't check first sscanf() return value.  If first sscanf()
failed then c contains some garbage.  It might lead to reading
uninitialised stack data in the second sscanf() call.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:05 -08:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Tejun Heo
99ef21216b leds-wm8350: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush led->work on removal instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
2010-12-24 15:59:07 +01:00
Johannes Berg
91facc22de led_class: fix typo in blink API
When I added led_blink_set I had a typo: the return value of the hw
offload is a regular error code that is zero when succesful, and in that
case software emulation should not be used, rather than the other way
around.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 19:43:34 -08:00
Johannes Berg
0bae35e14b leds: fix up dependencies
It's not useful to build LED triggers when there's no LEDs that can be
triggered by them.  Therefore, fix up the dependencies so that this
cannot happen, and fix a few users that select triggers to depend on
LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS,
which is OK).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Arnd Hannemann <arnd@arndnet.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02 14:51:15 -08:00
Samu Onkalo
11e7946f19 drivers/leds/leds-lp5523.c: perform SW reset before detection
Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:44 +09:00
Samu Onkalo
95ea8eec34 drivers/leds/leds-lp5521.c: perform SW reset before detection
Chip detection may fail if the chip is in some odd state for example after
system restart.  Chip doesn't have HW reset line.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:43 +09:00
Samu Onkalo
2e4840edb7 drivers/leds/leds-lp5523.c: adjust delays and add comments to them
Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:43 +09:00
Samu Onkalo
09c76b0f6e drivers/leds/leds-lp5521.c: adjust delays and add comments to them
Delays were little bit too long.  Adjust delay times and add some comments
to them.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:42 +09:00
Samu Onkalo
87dbf6234d drivers/leds/leds-lp5523.c: change some macros to functions
A small macro changed to inline function to have proper type checking.
Inline added to two similar small functions.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:42 +09:00
Samu Onkalo
9fdb18b6cb drivers/leds/leds-lp5521.c: change some macros to functions
Some small macros changed to inline functions to have proper type
checking.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:41 +09:00
Steven Rostedt
50d431e8a1 leds: fix bug with reading NAS SS4200 dmi code
While running randconfg with ktest.pl I stumbled upon this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
  IP: [<ffffffff815fe44f>] strstr+0x39/0x86
  PGD 0
  Oops: 0000 [#1] SMP
  last sysfs file:
  CPU 0
  Modules linked in:

  Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/
  RIP: 0010:[<ffffffff815fe44f>]  [<ffffffff815fe44f>] strstr+0x39/0x86
  RSP: 0018:ffff8800797cbd80  EFLAGS: 00010213
  RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff
  RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003
  RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725
  R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020
  R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08
  FS:  0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000)
  Stack:
   00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba
   ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b
   ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000
  Call Trace:
   [<ffffffff81e2050f>] dmi_matches+0x117/0x154
   [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8
   [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20
   [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8
   [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2
   [<ffffffff82da749c>] kernel_init+0x248/0x331
   [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10
   [<ffffffff82da7254>] ? kernel_init+0x0/0x331

Found that the nas_led_whitelist dmi_system_id structure array had no
NULL end delimiter, causing the dmi_check_system() loop to read an
undefined entry.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Dave Hansen <dave@sr71.net>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:33 +09:00
Davidlohr Bueso
25672b9dde drivers/leds/leds-gpio.c: properly initialize return value
In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM,
CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus
value when initializing the module.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Samu Onkalo
f4920f673c leds: update LP552x support Kconfig and Makefile
Provide configuration and compilation support for LP5521 and LP5523

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Samu Onkalo
0efba16cc0 leds: driver for National Semiconductors LP5523 chip
LP5523 chip is nine channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Samu Onkalo
500fe14136 leds: driver for National Semiconductor LP5521 chip
This patchset provides support for LP5521 and LP5523 LED driver chips from
National Semicondutor.  Both drivers supports programmable engines and
naturally LED class features.

Documentation is provided as a part of the patchset.  I created "leds"
subdirectory under Documentation.  Perhaps the rest of the leds*
documentation should be moved there.

Datasheets are freely available at National Semiconductor www pages.

This patch:

LP5521 chip is three channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Johannes Berg
5ada28bf76 led-class: always implement blinking
Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Randy Dunlap
65f75ace23 leds-net5501: taints kernel, add license
Add MODULE_LICENSE() that matches file comments so that kernel
is not tainted.

	leds_net5501: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-05 09:51:56 -07:00
Haojian Zhuang
f5d59fc575 leds: Remove auto blink in 88pm860x
88pm860x supports auto-blink LED in hardware. It messed with
timer trigger. Now disable the auto-blink function.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:44 +02:00
Simon Guinot
2446783250 leds: add LED driver for Big Network series LEDs
This patch add a LED class driver for LEDs found on the LaCie 2Big and
5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled
through a GPIO extension bus.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-10-07 14:02:12 -04:00
Simon Guinot
e5971bbc1c leds: leds-ns2: fix private driver data storage
dev_set_drvdata() can't be used to set the driver private data pointer.
This would overwrite the led classdev object previously registered by
led_classdev_register().

Note that despite this mistake, the driver work fine because led_dat and
led_dat->cdev are at the same memory address.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-10-07 14:00:23 -04:00
Simon Guinot
84712e9aa4 [ARM] Kirkwood: add LaCie d2 Network v2 support
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 22:43:44 -04:00
Simon Guinot
f539dfedbd leds: leds-ns2: fix locking
This patch replace all the lock functions with the irq safe variant.
The ns2_led_{set,get}_mode() functions must be safe in all context.

For example, the trigger timer call led_set_brightness() in a softirq
context.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 22:43:42 -04:00
Linus Torvalds
58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
Grant Likely
2dc1158137 of/device: Replace struct of_device with struct platform_device
of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06 09:25:50 -06:00
Guenter Roeck
0c8617d3ab leds: Remove owner field from attribute initialization in bd2802 driver
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:35 -07:00
Simon Guinot
11efe71f65 leds: add LED driver for Network Space v2 LEDs
This patch add a LED class driver for the dual-GPIO LEDs found on the
Network Space v2 board (and parents). This include Internet Space v2,
Network Space (Max) v2 and d2 Network v2 boards.

This dual-GPIO LED is wired to a CPLD and can blink in relation with the
SATA activity. The driver expose this capability through a "sata" sysfs
attribute.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:02:00 -04:00
Wolfram Sang
fbae3fb154 i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04d to fix the faulty drivers.

As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-03 11:33:58 +02:00
Richard Purdie
5f8269da9c leds: Fix leds-gpio openfirmware compile issue
Fix a compile issue when openfirmware is enabled from commit
2146325df2.

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-28 08:35:27 +01:00
Richard Purdie
37814fdc95 leds: Kconfig fixes
Soekris net5501 is x86 only and cleanup some undeeded dependencies

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-28 08:35:27 +01:00
Philippe Rétornaz
7fdcef8a41 leds: Add mc13783 LED support
This add basic led support for Freescale MC13783 PMIC.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26 13:07:56 +01:00
Axel Lin
1e653accf7 leds: leds-ss4200: fix led_classdev_unregister twice in error handling
In current implementation, if device_create_file failed in register_nasgpio_led,
led_classdev_unregister will be executed twice.
( in register_nasgpio_led it calls led_classdev_unregister before return and in nas_gpio_init out_err )

This patch fixes it by only unregistering those that were successfully registered in out_err.
( not including last failed register_nasgpio_led call )

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26 13:07:56 +01:00