Commit Graph

5991 Commits

Author SHA1 Message Date
Linus Torvalds
916f562fb2 This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00
Linus Torvalds
8de262531f - Core Frameworks
- Set 'struct device' fwnode when registering a new device
 
  - New Drivers
    - Add support for ROHM BD70528 PMIC
 
  - New Device Support
    - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
    - Add support for RK809 and RK817 to Rockchip RK808
    - Add support for Lid Angle to ChromeOS core
    - Add support for CS47L15 CODEC to Madera core
    - Add support for CS47L92 CODEC to Madera core
    - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
    - Add support for Add Intel Elkhart Lake PCH to Intel LPSS
 
  - New Functionality
    - Provide regulator supply information when registering; madera-core
    - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
    - Allow over-riding power button press via Device Tree; rohm-bd718x7
    - Differentiate between running processors; cros_ec_dev
 
  - Fix-ups
    - Big header file update; cros_ec_commands.h
    - Split header per-subsystem; rohm-bd718x7
    - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
    - Trivial; sorting, coding style; intel-lpss-pci
    - Only remove Power Off functionality if set locally; rk808
    - Make use for Power Off Prepare(); rk808
    - Fix spelling mistake in header guards; stmfx
    - Properly free IDA resources
    - SPDX fixups; cs47lXX-tables, madera
    - Error path fixups; hi655x-pmic
 
  - Bug Fixes
    - Add missing break in case() statement
    - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
    - Fix reference to Device Tree documentation; madera
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl0sLxgACgkQUa+KL4f8
 d2E25Q/9HmDJIdfyDQg0xv5IM5HS1WsP9BcJCEgoRIsad4mMDRYt+ZeLbslwMhue
 E9tsFH359gGvyqR+7d6hPpEUET1UEcJy4eRD1zAc0+epllQTDHSy8oHt1dtH+8xB
 2AU5rvAKOqBk83D+V2Hkx2KcroWEQQNYIoR9/12Pi3xmEB1uaCO0/Ajd3B28bIBM
 Tzi3cVQ3U7jY9EIM44GVTsjDAbMSkQR0iab6cQF0vJAWaUmGKlsO7iRrU1XkN69V
 qXyBauI8WGiGssihrE8r+jYvHvmg7hA9OKZIckUaMXD/k7kpHbwIaFRh7gukq4Re
 Q6Cy30NfVJ1tY66/5oqN6gj5znfeuEudMCCzYAkzlROSp5eApe2Ke5ajYn3kOCZd
 ZKcsrw9Fiox1lKmuWXDbyf0nqf4zwdDPAnShRWaaF5aipwgywyGcwSigVtK4F0P5
 Hjc5RLv7GjTAJq+ZzwgKyAdtx8L0mhdLd1ZTQpEXk/g/E9dW4GF72hWj9TQ/9BnA
 ZflKv8aP3lDGRHgO3Huwi4lMzskB8BVCQMCFwLwGs5cY1oZQhAjTdJzBZjTGexhC
 evuuA8OUsCrOWMvnZf3saSdHJ1iMHtfPnqEGHRJQtNj4fFaXv80LasIomvvfJc1/
 9JlRyAgm2pF7YDrgTh65ZzBb324eKSZZoAj9XZbnTyzxUAcF69A=
 =A3jw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...
2019-07-15 20:18:40 -07:00
Stephen Boyd
b1511f7a48 Merge branches 'clk-bcm63xx', 'clk-silabs', 'clk-lochnagar' and 'clk-rockchip' into clk-next
- Support gated clk controller on MIPS based BCM63XX SoCs
 - Small frequency support for SiLabs Si544 chips
 - Support SiLabs Si5341 and Si5340 chips

* clk-bcm63xx:
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings

* clk-silabs:
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support

* clk-lochnagar:
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: lochnagar: Use new parent_data approach to register clock parents

* clk-rockchip:
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: rockchip: convert pclk_wdt boilerplat to new SGRF_GATE macro
  clk: rockchip: add a type from SGRF-controlled gate clocks
  clk: rockchip: Remove 48 MHz PLL rate from rk3288
  clk: rockchip: add 1.464GHz cpu-clock rate to rk3228
  clk: rockchip: Slightly more accurate math in rockchip_mmc_get_phase()
  clk: rockchip: Don't yell about bad mmc phases when getting
  clk: rockchip: Use clk_hw_get_rate() in MMC phase calculation
2019-07-12 11:11:51 -07:00
Stephen Boyd
47c9e0cef0 Merge branches 'clk-rpi-cpufreq', 'clk-tegra', 'clk-simplify-provider.h', 'clk-sprd' and 'clk-at91' into clk-next
- Support for CPU clks on Raspberry Pi devices
 - Slow clk support for AT91 SAM9X60 SoCs

* clk-rpi-cpufreq:
  clk: raspberrypi: register platform device for raspberrypi-cpufreq
  firmware: raspberrypi: register clk device
  clk: bcm283x: add driver interfacing with Raspberry Pi's firmware
  clk: bcm2835: remove pllb

* clk-tegra:
  clk: tegra: Do not enable PLL_RE_VCO on Tegra210
  clk: tegra: Warn if an enabled PLL is in IDDQ
  clk: tegra: Do not warn unnecessarily
  clk: tegra210: fix PLLU and PLLU_OUT1

* clk-simplify-provider.h:
  clk: consoldiate the __clk_get_hw() declarations
  clk: Unexport __clk_of_table
  clk: Remove ifdef for COMMON_CLK in clk-provider.h

* clk-sprd:
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: sprd: Check error only for devm_regmap_init_mmio()
  clk: sprd: Switch from of_iomap() to devm_ioremap_resource()

* clk-at91:
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: at91: sckc: add support for SAM9X60
  dt-bindings: clk: at91: add bindings for SAM9X60's slow clock controller
  clk: at91: sckc: add support to specify registers bit offsets
  clk: at91: sckc: sama5d4 has no bypass support
2019-07-12 11:11:30 -07:00
Stephen Boyd
a993be3724 Merge branches 'clk-debugfs', 'clk-unused', 'clk-refactor' and 'clk-qoriq' into clk-next
- Add a 'clk_parent' file in clk debugfs
 - Remove dead code in various clk drivers

* clk-debugfs:
  clk: Add clk_parent entry in debugfs

* clk-unused:
  clk: qcom: Fix -Wunused-const-variable
  clk: mmp: frac: Remove set but not used variable 'prev_rate'
  clk: ti: Remove unused functions
  clk: mediatek: mt8516: Remove unused variable

* clk-refactor:
  clk: clk-cdce706: simplify getting the adapter of a client
  clk: Simplify clk_core_can_round()

* clk-qoriq:
  clk: qoriq: add support for lx2160a
2019-07-12 11:11:16 -07:00
Stephen Boyd
dfe1d3a283 Merge branches 'clk-bulk-optional', 'clk-kirkwood', 'clk-socfpga' and 'clk-docs' into clk-next
- Add a clk_bulk_get_optional() API (with devm too)
 - Support for Marvell 98DX1135 SoCs

* clk-bulk-optional:
  clk: Document some devm_clk_bulk*() APIs
  clk: Add devm_clk_bulk_get_optional() function
  clk: Add clk_bulk_get_optional() function

* clk-kirkwood:
  clk: kirkwood: Add support for MV98DX1135
  dt-bindings: clock: mvebu: Add compatible string for 98dx1135 core clock

* clk-socfpga:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: socfpga: stratix10: add additional clocks needed for the NAND IP

* clk-docs:
  clk: Grammar missing "and", Spelling s/statisfied/satisfied/
2019-07-12 11:11:06 -07:00
Stephen Boyd
e02cb1f593 Merge branches 'clk-ti', 'clk-samsung', 'clk-imx' and 'clk-allwinner' into clk-next
* clk-ti:
  clk: ti: Use int to check return value from of_property_count_elems_of_size()
  firmware: ti_sci: extend clock identifiers from u8 to u32
  clk: keystone: sci-clk: extend clock IDs to 32 bits
  clk: keystone: sci-clk: probe clocks from DT instead of firmware
  clk: keystone: sci-clk: split out the fw clock parsing to own function
  clk: keystone: sci-clk: cut down the clock name length

* clk-samsung:
  clk: samsung: Add bus clock for GPU/G3D on Exynos4412
  clk: samsung: add new clocks for DMC for Exynos5422 SoC
  clk: samsung: add BPLL rate table for Exynos 5422 SoC
  clk: samsung: add needed IDs for DMC clocks in Exynos5420
  clk: samsung: exynos5433: Use of_clk_get_parent_count()

* clk-imx: (38 commits)
  clk: imx8mq: Keep uart clocks on during system boot
  clk: imx: Remove __init for imx_register_uart_clocks() API
  clk: imx6q: fix section mismatch warning
  clk: imx8mq: Use devm_platform_ioremap_resource() instead of of_iomap()
  clk: imx8mq: Use imx_check_clocks() API directly
  clk: imx: Remove __init for imx_check_clocks() API
  clk: imx6sll: Switch to clk_hw based API
  clk: imx7d: Switch to clk_hw based API
  clk: imx6ul: Switch to clk_hw based API
  clk: imx6sx: Switch to clk_hw based API
  clk: imx6q: Switch to clk_hw based API
  clk: imx6sl: Switch to clk_hw based API
  clk: imx: Switch wrappers to clk_hw based API
  clk: imx: clk-fixup-mux: Switch to clk_hw based API
  clk: imx: clk-fixup-div: Switch to clk_hw based API
  clk: imx: clk-gate-exclusive: Switch to clk_hw based API
  clk: imx: clk-pfd: Switch to clk_hw based API
  clk: imx: clk-pllv3: Switch to clk_hw based API
  clk: imx: clk-gate2: Switch to clk_hw based API
  clk: imx: clk-cpu: Switch to clk_hw based API
  ...

* clk-allwinner: (29 commits)
  clk: Simplify debugfs printing and add a newline
  clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE
  clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE
  clk: sunxi-ng: gate: Add macros for referencing local clock parents
  clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_*
  clk: sunxi-ng: switch to of_clk_hw_register() for registering clks
  clk: fixed-factor: Add CLK_FIXED_FACTOR_FW_NAME for DT clock-names parent
  ...
2019-07-12 11:10:59 -07:00
Stephen Boyd
1f5d580cab Merge branches 'clk-qcom-gdsc-warn', 'clk-ingenic', 'clk-qcom-qcs404-reset', 'clk-xgene-limit' and 'clk-meson' into clk-next
* clk-qcom-gdsc-warn:
  clk: qcom: gdsc: WARN when failing to toggle

* clk-ingenic:
  MIPS: Remove dead code
  clk: ingenic: Remove unused functions
  MIPS: jz4740: PM: Let CGU driver suspend clocks and set sleep mode
  clk: ingenic: Handle setting the Low-Power Mode bit
  clk: ingenic: Add missing header in cgu.h
  clk: ingenic/jz4725b: Fix "pll half" divider not read/written properly
  clk: ingenic/jz4725b: Fix incorrect dividers for main clocks
  clk: ingenic/jz4770: Fix incorrect dividers for main clocks
  clk: ingenic/jz4740: Fix incorrect dividers for main clocks
  clk: ingenic: Add support for divider tables

* clk-qcom-qcs404-reset:
  clk: gcc-qcs404: Add PCIe resets

* clk-xgene-limit:
  clk: xgene: Don't build COMMON_CLK_XGENE by default

* clk-meson:
  clk: meson: g12a: mark fclk_div3 as critical
  clk: meson: g12a: Add support for G12B CPUB clocks
  dt-bindings: clk: meson: add g12b periph clock controller bindings
  clk: meson-g12a: add temperature sensor clocks
  dt-bindings: clk: g12a-clkc: add Temperature Sensor clock IDs
  clk: meson: meson8b: add the cts_i958 clock
  clk: meson: meson8b: add the cts_mclk_i958 clocks
  clk: meson: meson8b: add the cts_amclk clocks
  dt-bindings: clock: meson8b: add the audio clocks
  clk: meson: g12a: add controller register init
  clk: meson: eeclk: add init regs
  clk: meson: g12a: add mpll register init sequences
  clk: meson: mpll: add init callback and regs
  clk: meson: axg: spread spectrum is on mpll2
  clk: meson: gxbb: no spread spectrum on mpll0
  clk: meson: mpll: properly handle spread spectrum
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo
2019-07-12 11:10:52 -07:00
Stephen Boyd
b6bb2bc2fd Merge branches 'clk-pwm-duty', 'clk-bcm', 'clk-mtk', 'clk-qcom-msm8998-gpu' and 'clk-renesas' into clk-next
- Add support to get duty cycle of generic pwm clks

* clk-pwm-duty:
  clk: pwm: implement the .get_duty_cycle callback

* clk-bcm:
  clk: bcm: Allow CLK_BCM2835 for ARCH_BRCMSTB
  clk: bcm: Make BCM2835 clock drivers selectable

* clk-mtk:
  clk: mediatek: Remove MT8183 unused clock
  clk: mediatek: add audsys clock driver for MT8516
  dt-bindings: mediatek: audsys: add support for MT8516

* clk-qcom-msm8998-gpu:
  dt-bindings: clock: Document gpucc for msm8998

* clk-renesas:
  clk: renesas: cpg-mssr: Use [] to denote a flexible array member
  clk: renesas: cpg-mssr: Combine driver-private and clock array allocation
  clk: renesas: mstp: Combine group-private and clock array allocation
  clk: renesas: div6: Combine clock-private and parent array allocation
  clk: renesas: cpg-mssr: Update kerneldoc for struct cpg_mssr_priv
  clk: renesas: r8a774a1: Add TMU clock
  clk: renesas: r8a77995: Add CMM clocks
  clk: renesas: r8a77990: Add CMM clocks
  clk: renesas: r8a77965: Add CMM clocks
  clk: renesas: r8a7795: Add CMM clocks
  clk: renesas: r9a06g032: Add clock domain support
  dt-bindings: clock: renesas: r9a06g032-sysctrl: Document power Domains
  clk: renesas: mstp: Remove error messages on out-of-memory conditions
  clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditions
  clk: renesas: cpg-mssr: Use genpd of_node instead of local copy
  clk: renesas: r8a7796: Add CMM clocks
  clk: renesas: r8a779{5|6|65}: Add TPU clock
2019-07-12 11:10:43 -07:00
Chris Paterson
85f946ffd3 scripts/spelling.txt: add spelling fix for prohibited
Misspelling 'prohibited' is quite common in the real world, although
surprisingly not so much in the Linux Kernel.  In addition to fixing the
typo we may as well add it to the spelling checker.

Also adding the present participle (prohibiting).

Link: http://lkml.kernel.org/r/20190514153341.22540-1-chris.paterson2@renesas.com
Fixes: 5bf2fbbef5 ("clk: renesas: cpg-mssr: Add r8a77470 support")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 11:05:41 -07:00
Stephen Rothwell
1df3799243 clk: consoldiate the __clk_get_hw() declarations
Without this we were getting errors like:

In file included from drivers/clk/clkdev.c:22:0:
drivers/clk/clk.h:36:23: error: static declaration of '__clk_get_hw' follows non-static declaration
include/linux/clk-provider.h:808:16: note: previous declaration of '__clk_get_hw' was here

Fixes: 59fcdce425 ("clk: Remove ifdef for COMMON_CLK in clk-provider.h")
fixes: 73e0e496af ("clkdev: Always allocate a struct clk and call __clk_get() w/ CCF")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-12 11:00:14 -07:00
Lee Jones
8e23cee84c Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', 'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged 2019-07-02 12:10:53 +01:00
Linus Torvalds
556e2f6020 A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
    nonsensical value
 
  - Fix some clk data typos in the Amlogic DT headers/code
 
  - Avoid returning junk in the TI clk driver when an invalid clk is
    looked for
 
  - Fix dividers for the emac clks on Stratix10 SoCs
 
  - Fix default HDA rates on Tegra210 to correct distorted audio
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0VIHcRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSU0Ww//XVDS0JqiWcEopLc8dLrjxn2n7W3qlbB9
 8RqkrvFK/yv9Hrd1OqTSJLnrDQKb0zYnzjzU0g7Isdk81uecRQDJksjWQ/laR5i4
 ut5QOwV8IBSRl6Mu4XoMHvt9apysXX9od8B6Iu1fhbgmQeKlVkX/PYuT+mcQtMjc
 2Zg6ILQpkFaXhB9vQxVZwwmGZyR4/pfNCltl8A1Zg9ZkWgpOvv+7wHo/5AYNIBYM
 JbynlCdOii9gNXwoXPnayNvqwKNi0NEEfzOX/RuSarwrRVKdbqbWKhKlHTRv3LwC
 myo+dh/7l1l+1ANhBedzbnSa5YHSUyZXjkO+pKBctJEOGMV9+fbGEOvxt1LPBr7X
 IrSevXYwPfgHdxxnoMM+S5OTWYyv9jOTTXEwIc3rAoDnAJWcLsg6V8MEGL/CGQ7T
 yrSRARGCowU73rJXwfTayMKSqQgaTGmB00x4lewQK29DA0uMunQTzRU7qjOAe919
 ECgdYV6WJcRCThrAfknARD/FS+J07fMqyLD9IFd2bFQuGWCq8EFT7Ky2t89bXULG
 SMvLUe9CUpURtfdrDjz8h+VzmAStoAWck63EffgymPILRhRI4xY+Mr/YyfQ07rMu
 BTSsj9wd8AywhmOgi42TVOFZS39bDCAytJ9LMaxDyNXsDVi/REC3O43z9kyHoUQB
 JIyQyHFSRD0=
 =3QYB
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo
2019-06-28 08:50:09 +08:00
Chunyan Zhang
c974c48dee clk: sprd: Add check for return value of sprd_clk_regmap_init()
sprd_clk_regmap_init() doesn't always return success, adding check
for its return value should make the code more strong.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
[sboyd@kernel.org: Add a missing int ret]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 15:08:29 -07:00
Mike Looijmans
3044a860fd clk: Add Si5341/Si5340 driver
Adds a driver for the Si5341 and Si5340 chips. The driver does not fully
support all features of these chips, but allows the chip to be used
without any support from the "clockbuilder pro" software.

If the chip is preprogrammed, that is, you bought one with some defaults
burned in, or you programmed the NVM in some way, the driver will just
take over the current settings and only change them on demand. Otherwise
the input must be a fixed XTAL in its most basic configuration (no
predividers, no feedback, etc.).

The driver supports dynamic changes of multisynth, output dividers and
enabling or powering down outputs and multisynths.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[sboyd@kernel.org: Mark some things static, use BIT_ULL for big bits and
ULL for big constants]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 14:06:47 -07:00
Mike Looijmans
dc59c13375 clk: clk-si544: Implement small frequency change support
The Si544 supports changing frequencies "on the fly" when the change is
less than 950 ppm from the current center frequency. The driver now
uses the small adjustment routine for implementing this.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 13:45:38 -07:00
Jonas Gorski
1c099779c1 clk: add BCM63XX gated clock controller driver
Add a driver for the gated clock controller found on MIPS based BCM63XX
SoCs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[sboyd@kernel.org: Remove module.h include and associated things for a
non-modular driver, add static on data tables, drop of_match_ptr()
usage, fix spdx tag to be a C++ style comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 13:41:41 -07:00
Claudiu Beznea
ecbcc2aa65 clk: at91: sckc: use dedicated functions to unregister clock
Use at91 specific functions to free all resources in case of error.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:21 -07:00
Claudiu Beznea
d09e6ca138 clk: at91: sckc: improve error path for sama5d4 sck registration
Improve error path for sama5d4 sck registration.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:20 -07:00
Claudiu Beznea
8c938c2d00 clk: at91: sckc: remove unnecessary line
Remove unnecessary line.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:20 -07:00
Claudiu Beznea
82e25dc8f6 clk: at91: sckc: improve error path for sam9x5 sck register
Improve error path for sam9x5 slow clock registration.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:19 -07:00
Claudiu Beznea
016d22dd10 clk: at91: sckc: add support to free slow clock osclillator
Add support to free slow clock oscillator resources.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:18 -07:00
Claudiu Beznea
036702468c clk: at91: sckc: add support to free slow rc oscillator
Add support to free slow rc oscillator resources.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:17 -07:00
Claudiu Beznea
7fb791d079 clk: at91: sckc: add support to free slow oscillator
Add support to free slow oscillator resources.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27 11:18:16 -07:00
Tony Xie
8ed1440197 clk: RK808: Add RK809 and RK817 support.
RK809 and RK817 are power management IC chips for multimedia products.
most of their functions and registers are same, including the clkout
funciton.

Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 14:57:59 +01:00
Matti Vaittinen
0dae7f5857 clk: bd718x7: Support ROHM BD70528 clk block
ROHM BD70528 is an ultra low power PMIC with similar 32K clk as
bd718x7. Only difference (from clk perspective) is register address.
Add support for controlling BD70528 clk using bd718x7 driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:57:24 +01:00
Matti Vaittinen
2a6a7aacd4 mfd: regulator: clk: Split rohm-bd718x7.h
Split the bd718x7.h to ROHM common and bd718x7 specific parts
so that we do not need to add same things in every new ROHM
PMIC header. Please note that this change requires changes also
in bd718x7 sub-device drivers for regulators and clk.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:56:27 +01:00
Heiko Stuebner
794e94ca83 clk: rockchip: export HDMIPHY clock on rk3228
Export the hdmiphy clock mux via the newly added clock-id.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Justin Swartz <justin.swartz@risingedge.co.za>
2019-06-27 11:02:28 +02:00
Heiko Stuebner
d59fca075c clk: rockchip: add watchdog pclk on rk3328
The watchdog pclk is controlled from the secure GRF but we still
want to mention it explicitly to not use arbitary parent clocks
in the devicetree wdt node, so add a SGRF_GATE for it.

Suggested-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27 11:02:17 +02:00
Claudiu Beznea
04bcc4275e clk: at91: sckc: add support for SAM9X60
Add support for SAM9X60's slow clock.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26 11:33:55 -07:00
Claudiu Beznea
abaceffc88 clk: at91: sckc: add support to specify registers bit offsets
Different IPs uses different bit offsets in registers for the same
functionality, thus adapt the driver to support this.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26 11:32:53 -07:00
Claudiu Beznea
5cf6d876a7 clk: at91: sckc: sama5d4 has no bypass support
The slow clock of SAMA5D4 has no bypass support thus remove it.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26 11:32:11 -07:00
Chunyan Zhang
78f5296951 clk: sprd: Check error only for devm_regmap_init_mmio()
The function devm_regmap_init_mmio() wouldn't return NULL pointer for
now, so only need to ensure the return value is not an error code.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26 11:15:08 -07:00
Chunyan Zhang
69b39d2503 clk: sprd: Switch from of_iomap() to devm_ioremap_resource()
devm_ioremap_resources() automatically requests resources and devm_ wrappers
do better error handling and unmapping of the I/O region when needed,
that would make drivers more clean and simple.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26 11:12:50 -07:00
Charles Keepax
055ca54777 clk: lochnagar: Use new parent_data approach to register clock parents
Switch over to the more modern style of registering parents and simplify
the code in the process.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:29:03 -07:00
Thierry Reding
e3527dca15 clk: tegra: Do not enable PLL_RE_VCO on Tegra210
It turns out that this PLL is not used on Tegra210, so there's no need
to enable it via the init table. Remove the init table entry for this
PLL to avoid it getting enabled at boot time. If the bootloader enabled
it and forgot to turn it off, the common clock framework will now know
to disable it because it is unused.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:12:55 -07:00
Thierry Reding
c1139d2083 clk: tegra: Warn if an enabled PLL is in IDDQ
A PLL in IDDQ doesn't work, whether it's enabled or not. This is not a
configuration that makes sense, so warn about it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:10:28 -07:00
Thierry Reding
2067507012 clk: tegra: Do not warn unnecessarily
There is no need to warn if the reference PLL is enabled with the
correct defaults. Only warn if the boot values don't match the defaults.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:10:21 -07:00
JC Kuo
0d34dfbf30 clk: tegra210: fix PLLU and PLLU_OUT1
Full-speed and low-speed USB devices do not work with Tegra210
platforms because of incorrect PLLU/PLLU_OUT1 clock settings.

When full-speed device is connected:
[   14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb
[   14.196295] usb 1-3: device descriptor read/64, error -71
[   14.436311] usb 1-3: device descriptor read/64, error -71
[   14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[   14.812335] usb 1-3: device descriptor read/64, error -71
[   15.052316] usb 1-3: device descriptor read/64, error -71
[   15.164799] usb usb1-port3: attempt power cycle

When low-speed device is connected:
[   37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad?
[   38.564977] usb usb1-port3: attempt power cycle

This commit fixes the issue by:
 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock
    because PLLU_OUT1 is parent of XUSB_FS_SRC.
 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical
    Reference Manual.

Fixes: e745f992cf ("clk: tegra: Rework pll_u")
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:08:23 -07:00
Nicolas Saenz Julienne
e2bb18347c clk: raspberrypi: register platform device for raspberrypi-cpufreq
As 'clk-raspberrypi' depends on RPi's firmware interface, which might be
configured as a module, the cpu clock might not be available for the
cpufreq driver during it's init process. So we register the
'raspberrypi-cpufreq' platform device after the probe sequence succeeds.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:04:28 -07:00
Nicolas Saenz Julienne
4e85e535e6 clk: bcm283x: add driver interfacing with Raspberry Pi's firmware
Raspberry Pi's firmware offers an interface though which update it's
clock's frequencies. This is specially useful in order to change the CPU
clock (pllb_arm) which is 'owned' by the firmware and we're unable to
scale using the register interface provided by clk-bcm2835.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:04:23 -07:00
Nicolas Saenz Julienne
2256d89333 clk: bcm2835: remove pllb
Raspberry Pi's firmware controls this pll, we should use the firmware
interface to access it.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 16:04:15 -07:00
Vabhav Sharma
78a5ba8f91 clk: qoriq: add support for lx2160a
Add clockgen support and configuration for NXP SoC lx2160a
with compatible property as "fsl,lx2160a-clockgen".

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:58:18 -07:00
Wolfram Sang
df095f996b clk: clk-cdce706: simplify getting the adapter of a client
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:55:39 -07:00
Nathan Huckleberry
da642427bd clk: qcom: Fix -Wunused-const-variable
Clang produces the following warning

drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable]
static const struct
parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] =
{ ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static
const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^
drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map'
[-Wunused-const-variable] static const struct parent_map
gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^
drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div'
[-Wunused-const-variable] static const char * const
gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {

It looks like these were never used.

Fixes: b1e010c073 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/518
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:49:38 -07:00
Paul Cercueil
9a838844a0 clk: ingenic: Remove unused functions
These functions are not called anywhere anymore, they can safely be
removed.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:43:39 -07:00
Paul Cercueil
2ee93e3c95 clk: ingenic: Handle setting the Low-Power Mode bit
The Low-Power Mode, when enabled, will make the "wait" MIPS instruction
suspend the system.

This is not really clock-related, but this bit happens to be in the
register set of the CGU.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:43:15 -07:00
Paul Cercueil
dbc38ad0e7 clk: ingenic: Add missing header in cgu.h
The cgu.h has structures that contain 'clk_onecell_data' and 'clk_hw'
structures (no pointers), so the <linux/clk-provider.h> header should be
included.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[sboyd@kernel.org: Drop removal of includes in drivers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 15:41:48 -07:00
Leonard Crestez
e5e89247a7 clk: Add clk_parent entry in debugfs
This allows to easily determine the parent in shell scripts without
parsing more complex files.

Add the clk_parent file for all clks which can have a parent, not just
muxes. This way it can be used to determine the clk tree structure
without parsing more complex files.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 14:53:10 -07:00
Geert Uytterhoeven
65e2218d10 clk: Grammar missing "and", Spelling s/statisfied/satisfied/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-25 14:51:35 -07:00