Commit Graph

1377 Commits

Author SHA1 Message Date
Takashi Iwai
274476f8fe mmc: Fix re-probing with PM_POST_RESTORE notification
In the error-path where PM notifies PM_POST_RESTORE, the rescan-blockage
should be cleared as well.  Otherwise it'll be never re-probed.

Also, as a bonus, this fixes a bug in S4 with user-mode suspend in the
current code, as it sends PM_POST_RESTORE instead of
PM_POST_HIBERNATION wrongly.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21 11:46:49 -08:00
Nicolas Ferre
2f1d791882 mmc: atmel-mci: fix multiblock SDIO transfers
Based on report made by Yauhen in:
"MMC: Fix multiblock SDIO transfers in AT91 MCI" patch,
I report those changes to the brother driver: atmel-mci.

So, this patch sets SDIO transfer types: SDIO block and SDIO byte
transfers instead of using ordinary MMC block transfers.
It is checking opcode for SDIO CMD53 and setting transfer
type in MCI_CMDR register properly.

Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Cc: <stable@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21 11:46:48 -08:00
Yauhen Kharuzhy
a2255ff451 mmc: at91_mci: fix multiblock SDIO transfers
The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte
transfers, but at91_mci driver doesn't use them and handles all SDIO
transfers as ordinary MMC block transfers. This causes problems for
multiple-block SDIO transfers (in particular for 256-bytes blocks).

Fix this situation by checking the opcode for SDIO CMD53 and setting
the transfer type in the AT91_MCI_CMDR register properly.

This patch was tested with libertas SDIO driver: problem with TX
timeouts on big packets was eliminated.

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Cc: <stable@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21 11:46:32 -08:00
Philip Rakity
15ec446119 mmc: sdhci: 8-bit bus width changes
We now:
 * check for a v3 controller before setting 8-bit bus width
 * offer a callback for platform code to switch to 8-bit mode, which
   allows non-v3 controllers to support it
 * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify
   that the board designers have indeed brought out all the pins for
   8-bit to the slot.

We were previously relying only on whether the *controller* supported
8-bit, which doesn't tell us anything about the pin configuration in
the board design.

This fixes the MMC card regression reported by Maxim Levitsky here:
   http://thread.gmane.org/gmane.linux.kernel.mmc/4336
by no longer assuming that 8-bit works by default.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-22 15:12:04 -05:00
Ohad Ben-Cohen
ed919b0125 mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD
Some board/card/host configurations are not capable of powering off the
card after boot.

To support such configurations, and to allow smoother transition to
runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to
explicitly indicate whether it's OK to power off their cards after boot.

SDIO core will enable runtime PM for a card only if that cap is set.
As a result, the card will be powered down after boot, and will only
be powered up again when a driver is loaded (and then it's up to the
driver to decide whether power will be kept or not).

This will prevent sdio_bus_probe() failures with setups that do not
support powering off the card.

Reported-and-tested-by: Daniel Drake <dsd@laptop.org>
Reported-and-tested-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-19 17:07:01 -05:00
Ohad Ben-Cohen
4d0812c37f mmc: sdio: fix nasty oops in mmc_sdio_detect
Power off the card in mmc_sdio_detect __before__ a potential error
handler, which completely removes the card, executes, and only if the
card was successfully powered on beforehand.

While we're at it, use the _sync variant of the runtime PM put API, in
order to ensure that the card is left powered off in case an error
occurred, and the card is going to be removed.

Reproduced and tested on the OLPC XO-1.5.

Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-19 17:06:52 -05:00
kishore kadiyala
b432b4b344 mmc: omap4: hsmmc: Fix improper card detection while booting
While booting OMAP4 ES2.0 boards, cards on MMC1 and MMC2 controllers
are not getting detected sometimes.

During reset of command/data line, wrong pointer to base address
was passed while read operation to SYSCTL register, thus impacting
the updated reset logic.

Passing the correct base address fixes the issue.

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-17 22:37:44 -05:00
Guennadi Liakhovetski
d9bcbf343e mmc: fix rmmod race for hosts using card-detection polling
MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL
flag have a race on rmmod, where the delayed work is cancelled without
waiting for completed polling. To prevent this a _sync version of the work
cancellation has to be used.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-11 18:42:38 -05:00
Jacob Pan
35ac6f081f mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms
SDHC2 is newly added in C0 stepping of Langwell. Without the Moorestown
specific quirk, the default pci_probe will be called and crash the kernel.

This patch unblocks the crash problem on C0 by using the same probing
function as HC1, which limits the number of slots to one.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-09 09:33:24 -05:00
Eric Bénard
16a790bcce mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35
Only these CPUs list the bug in their errata.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 17:52:27 -05:00
Eric Bénard
37865fe915 mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
This patch fixes timeout problems on i.MX's sdhci as suggested by
Richard Zhu.

Tested on:
- i.MX257: not needed
- i.MX357: needed
- i.MX515: needed

More details can be found here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-October/029748.html

Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Shawn Guo <shawn.gsc@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 17:52:20 -05:00
Daniel Drake
5f619704d1 mmc: sdhci: Properly enable SDIO IRQ wakeups
A little more work was needed for SDIO IRQ wakeups to be functional.

Wake-on-WLAN on the SD WiFi adapter in the XO-1.5 laptop is now working.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 16:45:11 -05:00
Axel Lin
14d4031d21 mmc: ushc: Return proper error code for ushc_probe()
Improves error handling in the ushc driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 16:45:11 -05:00
Philip Rakity
25d5c699f9 mmc: Fix printing of card DDR type
We should not call mmc_card_set_ddr_mode() if we are in single data
mode.  This sets DDR and causes the kernel log to say the card is DDR
when it is not.

Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when
doing the checks.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-07 16:45:08 -05:00
kishore kadiyala
72f2e2c763 mfd: Adding twl6030 mmc card detect support for MMC1
Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.

Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.

Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 &
OMAP4.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:59 +02:00
Yusuke Goda
f1334fb3c3 mmc: Allow 2 byte requests in 4-bit mode for tmio_mmc
Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit
mode if the hardware supports it.

Tested with the SDHI hardware block included in sh7724.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Magnus Damm <damm@opensource.se>
Tested-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:16 +02:00
Arnd Hannemann
777271d0f3 mmc: Allow the platform to specify the sh_mmcif get_cd handler
In some platforms (e.g. AP4EVB) the card detect pin of a slot is not
directly connected to the sh_mmcif controller, so that polling needs
to be used. To overcome the overhead induced by querying the controller
on each poll cycle, card detection can be handled in the platform code
more efficiently.
This patch exposes a get_cd hook for that purpose.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:13 +02:00
Arnd Hannemann
19ca7502c5 mmc: Allow the tmio_mmc mfd driver to specify get_cd handler
Some controllers, supported by the tmio_mmc driver do not have the card
detect pin of a slot connected, so that polling needs to be used and
card detection is handled by other means.
This patch exposes a get_cd hook for that purpose.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:08 +02:00
Linus Torvalds
00ebb6382b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
  mmc: add new sdhci-pxa driver for Marvell SoCs
  mmc: make number of mmcblk minors configurable
  mmc_spi: Recover from CRC errors for r/w operation over SPI.
  mmc: sdhci-pltfm: add -pltfm driver for imx35/51
  mmc: sdhci-of-esdhc: factor out common stuff
  mmc: sdhci_pltfm: pass more data on custom init call
  mmc: sdhci: introduce get_ro private write-protect hook
  mmc: sdhci-pltfm: move .h file into appropriate subdir
  mmc: sdhci-pltfm: Add structure for host-specific data
  mmc: fix cb710 kconfig dependency warning
  mmc: cb710: remove debugging printk (info duplicated from mmc-core)
  mmc: cb710: clear irq handler on init() error path
  mmc: cb710: remove unnecessary msleep()
  mmc: cb710: implement get_cd() callback
  mmc: cb710: partially demystify clock selection
  mmc: add a file to debugfs for changing host clock at runtime
  mmc: sdhci: allow for eMMC 74 clock generation by controller
  mmc: sdhci: highspeed: check for mmc as well as sd cards
  mmc: sdhci: Add Moorestown device support
  mmc: sdhci: Intel Medfield support
  ...
2010-10-28 09:33:42 -07:00
Nicolas Ferre
75305d768d at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:49 +02:00
Linus Torvalds
7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Zhangfei Gao
536ac998f6 mmc: add new sdhci-pxa driver for Marvell SoCs
Support Marvell PXA168/PXA910/MMP2 SD Host Controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-25 09:29:07 +08:00
Olof Johansson
5e71b7a64c mmc: make number of mmcblk minors configurable
The old limit of number of minor numbers per mmcblk device was hardcoded
at 8.  This isn't enough for some of the more elaborate partitioning
schemes, for example those used by Chrome OS.

Since there might be a bunch of systems out there with static /dev
contents that relies on the old numbering scheme, let's make it a
build-time option with the default set to the previous 8.

Also provide a boot/modprobe-time parameter to override the config
default: mmcblk.perdev_minors.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Mandeep Baines <msb@chromium.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-25 09:28:46 +08:00
Sonic Zhang
061c6c847e mmc_spi: Recover from CRC errors for r/w operation over SPI.
The SPI bus is not reliable for large data transfers on all platforms.
The current mmc_spi driver fails SD read/write commands immediately if
occasional CRC errors are reported by the SD device.  This patch makes
the operation recover from CRC errors by repeating the last SD command.
The retry count is set to 5 to ensure the driver passes stress tests.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:22 +08:00
Wolfram Sang
95f25efe0c mmc: sdhci-pltfm: add -pltfm driver for imx35/51
This driver adds basic support for the esdhc-core found on e.g.
imx35/51, as a platform driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:22 +08:00
Wolfram Sang
80872e21b0 mmc: sdhci-of-esdhc: factor out common stuff
Put everything which can be shared between the OF and platform version
of this driver into a local .h file.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Eric Bénard <eric@eukrea.com>
[cjb: fix compile error: sdhci-esdhc.c->sdhci-esdhc.h]
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:22 +08:00
Wolfram Sang
012994f4fa mmc: sdhci_pltfm: pass more data on custom init call
The custom init call may need more data to perform its job, so we pass
it a pointer to pdata, too. Also, always use the platform_id specific
data even if platform_data is present. Doing that, platform_data can
additionally be parsed by init() for board-specific information (via
sdhci->mmc->parent).

(Note: the old behaviour was that you could override the platform_id
specific data with your own. However, one can still do this by using the
"sdhci" id instead of "sdhci-<something>".)

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:22 +08:00
Wolfram Sang
2dfb579c7d mmc: sdhci: introduce get_ro private write-protect hook
Some controllers handle their write-protection differently. Introduce a
callback to be able to handle it, ensuring the same locking takes place
for it. Rename the status variable to make it more obvious why the read
from the registers needs to be inverted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:21 +08:00
Wolfram Sang
d3b993dcc1 mmc: sdhci-pltfm: move .h file into appropriate subdir
Make use of the include/linux/mmc directory.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:21 +08:00
Wolfram Sang
4b711cb138 mmc: sdhci-pltfm: Add structure for host-specific data
We need to carry some information per host, e.g. the clock. Add a
structure for it and initialize it in the generic part. Also improve
the check for a parent.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:21 +08:00
Randy Dunlap
9ffca8300a mmc: fix cb710 kconfig dependency warning
Fix kconfig dependency warning to satisfy dependencies:

  warning: (MMC_CB710 && MMC && PCI) selects CB710_CORE which has
  unmet direct dependencies (MISC_DEVICES && PCI)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:21 +08:00
Michał Mirosław
d34289d804 mmc: cb710: remove debugging printk (info duplicated from mmc-core)
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:21 +08:00
Michał Mirosław
e0780db9f8 mmc: cb710: clear irq handler on init() error path
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Michał Mirosław
2abd4f1a43 mmc: cb710: remove unnecessary msleep()
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Michał Mirosław
7fcc4ce37f mmc: cb710: implement get_cd() callback
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Michał Mirosław
19d614a45a mmc: cb710: partially demystify clock selection
Clock divider selection in partially verified, so document known facts
in code.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Andy Shevchenko
703aae3d09 mmc: add a file to debugfs for changing host clock at runtime
For debugging power management features it is convenient to have the
possibility of changing the MMC host controller clock at runtime.  This
patch adds a 'clock' file for this under the MMC host root of debugfs.

Usage is as follows:

	# cat /sys/kernel/debug/mmc0/clock
	52000000

	# echo "1000000000" > /sys/kernel/debug/mmc0/clock
	# cat /sys/kernel/debug/mmc0/clock
	52000000

	# echo "48000000" > /sys/kernel/debug/mmc0/clock
	# cat /sys/kernel/debug/mmc0/clock
	48000000

The middle example shows limits being applied by the host driver.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
[cjb: modify changelog language]
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Philip Rakity
643a81ff3c mmc: sdhci: allow for eMMC 74 clock generation by controller
Snippet of code for how adaptation layer should handle the call:
/*
 * eMMC spec calls for the host to send 74 clocks to the card
 * during initialization, right after voltage stabilization.
 * create the clocks manually right here.
 */
void generate_init_clocks_A0(struct sdhci_host *host, u8 power_mode)
{
	struct sdhci_mmc_slot *slot = sdhci_priv(host);

	if (slot->power_mode == MMC_POWER_UP &&
	    power_mode == MMC_POWER_ON) {
		/* controller specific code here */
		/* slot->power_mode holds previous power setting */
	}
	slot->power_mode = power_mode;
}

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:20 +08:00
Philip Rakity
3ab9c8dad6 mmc: sdhci: highspeed: check for mmc as well as sd cards
The SD and MMC code set highspeed using different constants.
Change the sd driver to recognize this and switch to high speed.
Validated code when testing eMMC dual data rate.

Signed-off-by: Philip Rakity <prakity@marvell.com>
[cjb: changelog + indentation fixes]
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:19 +08:00
Alan Cox
f9ee3eab52 mmc: sdhci: Add Moorestown device support
This adds the basic identifiers. Due to the various chip quirks it's not
enough to make MRST support very useful for earlier steppings but that can
follow.

(I'm currently trying to verify which steps actually matter outside Intel
 so I can avoid unneeded stuff going upstream)

[Extracted from original development]
Signed-off-by: JiebingLi <jiebing.li@intel.com>
[Folds in fixes]
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:19 +08:00
Xiaochen Shen
292290524e mmc: sdhci: Intel Medfield support
Basic support for the Intel Medfield devices

Give them their own quirks as we will need to update this later.

Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:19 +08:00
Alan Cox
225d85fe7d mmc: sdhci: Allow the probe handler to override slots
Currently we write it to the chip data, but if the probe handler overrides
it we ignore the new value and keep using our cached one. Fix this so that
a probe handler can adjust the slot count.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:19 +08:00
Ohad Ben-Cohen
ed2a978594 mmc: sdio: support suspend/resume while runtime suspended
Bring SDIO devices back to full power before their suspend
handler is invoked.

Doing so ensures that SDIO suspend/resume semantics are
maintained (drivers still get to decide whether their
card should be removed or kept during system suspend,
and at what power state), and that SDIO suspend/resume
execution paths are unchanged.

This is achieved by resuming a runtime-suspended SDIO device
in its ->prepare() PM callback (similary to the PCI subsystem).

Since the PM core always increments the run-time usage
counter before calling the ->prepare() callback and decrements
it after calling the ->complete() callback, it is guaranteed
that when the system will come out of suspend, our device's
power state will reflect its runtime PM usage counter.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:19 +08:00
Ohad Ben-Cohen
87973ba27b mmc: sdio: ensure mmc_sdio_detect is powered
To prevent an erroneous removal of the card, make sure
the device is powered when it is mmc_sdio_detect()ed.

This is required since mmc_sdio_detect may be invoked
while the device is runtime suspended (e.g., MMC core
is rescanning when system comes out of suspend).

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
40bba0c1ca mmc: sdio: enable runtime PM for SDIO functions
Enable runtime PM for SDIO functions.

SDIO functions are initialized with a disabled runtime PM state,
and are set active (and their usage count is incremented)
only before potential drivers are probed.

SDIO function drivers that support runtime PM should call
pm_runtime_put_noidle() in their probe routine, and
pm_runtime_get_noresume() in their remove routine (very
similarly to PCI drivers).

In case a matching driver does not support runtime PM, power will
always be kept high (since the usage count is positive).

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
81968561bd mmc: sdio: enable runtime PM for SDIO cards
Enable runtime PM for new SDIO cards.

As soon as the card will be added to the device tree, runtime PM core
will release its power, since it doesn't have any users yet.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
80fd933c44 mmc: sdio: use the generic runtime PM handlers
Assign the generic runtime PM handlers for SDIO.

These handlers invoke the relevant SDIO function drivers'
handlers, if exist, otherwise they just return success
(so SDIO drivers don't have to define any runtime PM handlers
unless they need to).

Runtime PM is still disabled by default, so this patch alone
has no immediate effect.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
516d5ccdc6 mmc: add runtime PM handlers
Add MMC runtime PM handlers, which call mmc_power_save_host
and mmc_power_restore_host in response to runtime_suspend and
runtime_resume events.

Runtime PM is still disabled by default, so this patch alone
has no immediate effect.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
d3fe37b1a1 mmc: sdio: add power_restore support
Add a power_restore handler to the SDIO bus ops,
in order to support waking up SDIO cards that
were powered off by runtime pm.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:18 +08:00
Ohad Ben-Cohen
12ae637f08 mmc: propagate power save/restore ops return value
Allow power save/restore and their relevant mmc_bus_ops handlers
exit with a return value.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:17 +08:00