Commit Graph

47 Commits

Author SHA1 Message Date
Jonathan Nieder
db1d18657c scripts/package: deb-pkg: use fakeroot if available
Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or
becoming root oneself or it errors out.  Unless already running
as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a
good default.

With this patch applied, you can run "make oldconfig deb-pkg" as
an ordinary user to build a binary package for an updated kernel
tree and it should just work.

fakeroot is too zealous by default in treating files as owned by
root.  Its wrapped stat() sets st_uid and st_gid to 0 for all
files, which causes Git to go on a wild goose chase if
CONFIG_LOCALVERSION_AUTO is set, checking if any file's content
has changed along with its stat information.  Avoid this by
telling fakeroot to use the actual owner and group for
preexisting files, by passing it the -u option.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:16 +01:00
Jonathan Nieder
05ba4488a5 scripts/package: add KBUILD_PKG_ROOTCMD variable
Let the deb-pkg target acquire (fake) root privileges before
running commands that need them.  Without such privileges,
deb-pkg errors out because chown fails.

The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a
command to run other commands with possibly fake elevated
privileges.  Since this is not needed for the tar-pkg and rpm-pkg
targets, it is only used by deb-pkg.  If it is not defined, the
behavior is as before, and the user will have to rerun make as
root.

In other words, as a shortcut, instead of running 'make oldconfig &&
make && fakeroot -u make deb-pkg', one can use the single command
'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'.

Suggested-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Michal Marek
91d161857c scripts/package: tar-pkg: use tar --owner=root
Use the --owner= and --group= options to make sure the entries in
the built tar file are owned by root.  Without this change, a
careless sysadmin using the tar-pkg target can easily end up
installing a kernel that is writable by the unprivileged user
account used to build the kernel.

Test that these options are understood before using them so that
non-GNU versions of tar can still be used if the operator is
appropriately cautious.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Frans Pop
db9038c89d kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
The binrpm-pkg target (binary RPM only) fails when called with
KBUILD_OUTPUT set. This patch makes it work.

For the rpm-pkg target (source + binary RPM), building with
KBUILD_OUTPUT set is not possible and also not needed as the
actual build is done in a temporary directory anyway, so check
that KBUILD_OUTPUT is not set in that case to avoid later errors.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:24 +02:00
maximilian attems
241ad11f2d kbuild, deb-pkg: fix install scripts for posix sh
bash versus dash and posh disagree on expanding $@ within double quotes:
export x="$@"
see http://bugs.debian.org/381091 for details
just use the arglist with $*.

dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install):
 subprocess pre-installation script returned error exit status 2
export: 6: 2.6.31-rc1-18: bad variable name
fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567

seen on Ubuntu as there dash is the default sh,
versus bash on Debian.

Reported-by: Pauli <suokkos@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: maximilian attems <max@stro.at>
Acked-By: Andres Salomon <dilinger@collabora.co.uk>
2009-07-17 23:02:57 +02:00
maximilian attems
1ab18486e4 kbuild: deb-pkg ship changelog
In the series for 2.6.31 it was noticed to ship the copyright,
but the generated changelog got lost somehow.

As bonus the generated linux-image deb packages are Lenny lintian clean.

Cc: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:07:27 +02:00
maximilian attems
6d9923219c kbuild, deb-pkg: bump standards version
Latest Debian policy is 3.8.1.
Even if we are not yet compliant to it strive for the latest.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:42 +02:00
maximilian attems
54c3355658 kbuild, deb-pkg: fix Section field
Section "base" has been removed, the base is defined by Priority field.

For Squeeze the section should be "kernel", but as that's not yet
supported for Sarge and Etch we stay with admin for now.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:42 +02:00
maximilian attems
8ebc2fe9c5 kbuild, deb-pkg: fix Provides field
kernel-image naming has been dropped for the Lenny release
and was only transitional for Etch.

As it builds modules it provides linux-modules-$version.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:41 +02:00
maximilian attems
f7a2c31f1e kbuild, deb-pkg: fix generated package name
The binary package that make deb-pkg creates is a linux-image.
To be fixed may also be the addition of $DEB_ARCH.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:41 +02:00
Frans Pop
4bf4cd4939 kbuild, deb-pkg: improve Source field
The Source: field is defined as the source package in the package
archive from which a binary packages are built. As deb-pkg does not
generate a source package, we should avoid to use any existing source
packages here.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:40 +02:00
maximilian attems
edec611db0 kbuild, deb-pkg: improve maintainer identification
Try harder to find email and maintainer name.
Debian's own devscripts all use DEBEMAIL or DEBFULLNAME prior to an
eventual EMAIL or NAME environment variable. Match their logic.

"Anonymous" sounds nicer then "Kernel Compiler" if no name is found.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:39 +02:00
Frans Pop
9461f666e4 kbuild, deb-pkg: generate debian/copyright file
On Thursday 23 April 2009, Frans Pop wrote:
Add a basic debian/copyright to the binary packages.

Based on an earlier patch from Maximilian Attems.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:39 +02:00
Frans Pop
a83ca2777f kbuild, deb-pkg: improve changelog entry and package descriptions
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:38 +02:00
Frans Pop
fe233cb6bf kbuild, deb-pkg: allow alternative hook scripts directory in .deb packages
Hook scripts in the default directory /etc/kernel are also executed by
official Debian kernel packages as well as kernel packages created using
make-kpkg. Allow to specify an alternative hook scripts directory by
exporting the environment variable KDEB_HOOKDIR.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:37 +02:00
Frans Pop
c72c75db86 kbuild, deb-pkg: allow to specify a custom revision for .deb packages
Allow to specify a custom revision for the generated .deb by
exporting the environment variable KDEB_PKGVERSION.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:37 +02:00
Frans Pop
4964451a32 kbuild, deb-pkg: pass Debian maintainer script parameters to packaging hook scripts
The Debian packaging scripts created by the deb-pkg target do not pass
on the standard Debian maintainer script parameters to hook scripts,
which means that those scripts cannot tell whether they are being called
during e.g. install vs. upgrade, or removal vs. purge of the package.

As there are several variantions in how hook scripts are called from
kernel packages, we pass the parameters in the environment variable
DEB_MAINT_PARAMS rather than as extra arguments.

Bump version of builddep script to 1.3.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:36 +02:00
Frans Pop
a89b433bdd kbuild, deb-pkg: fix 'file not found' error when building .deb package for arm
Not all architectures prepend the $(boot) path in $(KBUILD_IMAGE).
Allow for that fact in the builddeb script. Example is arm.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:36 +02:00
Frans Pop
3e2ab2563a kbuild, deb-pkg: refactor code to reduce duplication
Factor out code to build package into separate function and
only write "source" section for the debian/control file once.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:35 +02:00
Frans Pop
4f66199b4b kbuild, deb-pkg: minor general improvements in builddeb script
Minor coding style improvements and typo fix in leading comment.

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:35 +02:00
Helge Deller
91400ac365 parisc: fix "make tar-pkg"
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02 01:22:24 +00:00
Josh Hunt
b925dbfe3c kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM.  This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.

mkspec creates kernel.spec using KERNELRELEASE:

<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>

When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM.  Next, the srctree is tarred up and SCM
information is excluded.

rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE.  However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information.  When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.

<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
  INSTALL crypto/aead.ko
  INSTALL crypto/cbc.ko
  INSTALL crypto/chainiv.ko
  INSTALL crypto/crc32c.ko
  INSTALL crypto/crypto_algapi.ko
  INSTALL crypto/crypto_blkcipher.ko
  INSTALL crypto/crypto_hash.ko
  INSTALL crypto/cryptomgr.ko
  INSTALL crypto/ecb.ko
  INSTALL crypto/eseqiv.ko
  INSTALL crypto/krng.ko
  INSTALL crypto/md5.ko
  INSTALL crypto/pcbc.ko
  INSTALL crypto/rng.ko
  INSTALL drivers/block/cciss.ko
  INSTALL drivers/hid/hid-dummy.ko
  INSTALL drivers/scsi/iscsi_tcp.ko
  INSTALL drivers/scsi/libiscsi.ko
  INSTALL drivers/scsi/libiscsi_tcp.ko
  INSTALL drivers/scsi/scsi_transport_iscsi.ko
  INSTALL drivers/scsi/scsi_wait_scan.ko
  INSTALL fs/lockd/lockd.ko
  INSTALL fs/nfs/nfs.ko
  INSTALL fs/nfsd/nfsd.ko
  INSTALL lib/libcrc32c.ko
  INSTALL net/sunrpc/sunrpc.ko
  DEPMOD  2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422

RPM build errors:
    File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>

I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
2009-03-07 13:55:38 +01:00
Josh Hunt
a2ebcc7a86 kbuild: fix mkspec to cleanup RPM_BUILD_ROOT
The contents of the %clean section in mkspec is currently commented
out leaving RPM_BUILD_ROOT and its contents on the build machine.
This patch removes it once the rpm build process is complete.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-07 13:53:21 +01:00
Josh Hunt
fc370ecfdb kbuild: add vmlinux to kernel rpm
We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept.  We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.

This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15 12:50:08 +01:00
Robert P. J. Day
abf681ce5b kbuild: remove TAR_IGNORE
Given that there is no usage of a TAR_IGNORE variable remove it

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-05 19:50:36 +01:00
Jeremy Kerr
c39dd50240 scripts/package: allow custom options to rpm
Add a RPMOPTS make variable to allow arbitrary options to be passed
to rpm during 'make rpm-pkg'. For example:

 make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03 22:35:06 +01:00
Jonathan McDowell
bf1b36445d kbuild: Fixup deb-pkg target to generate separate firmware deb
The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-11-09 23:02:58 +01:00
Jeremy Kerr
13797b77d4 scripts/package: don't break if %{_smp_mflags} isn't set
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:

  [snip]
  Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
  + umask 022
  + cd /home/jk/devel/kernel-snapshot/rpm/BUILD
  + cd kernel-2.6.26
  + make clean
  + make '%{_smp_mflags}'
  make[3]: *** No rule to make target `%{_smp_mflags}'.  Stop.
  error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)

This change uses the 'null if not set' reference to the _smp_mflags
macro instead.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29 22:02:08 +01:00
Evgeniy Manachkin
46dca86cb9 kbuild: mkspec - fix build rpm
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."

Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>
2008-10-29 22:02:06 +01:00
Michal Sojka
ed2c9fa53b Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
If CONIFIG_LOCALVERSION is set for example to -loop, the following error
message was generated.

dpkg-deb - error: Debian revision (`loop') doesn't contain any digits
dpkg-deb: 1 errors in control file

The patch solves this by adding a numeric revision to package version.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-09 10:51:47 +01:00
Daniel De Graaf
bc395add94 kbuild: support ARCH=x86 in buildtar
Signed-off-by: Daniel De Graaf <danieldegraaf@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Robert P. J. Day
899c38420c Kbuild: Clarify the rpm-related make packaging targets
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
bugme-daemon@bugzilla.kernel.org
6f67a00498 kbuild: make deb-pkg - add 'Provides:' line
http://bugzilla.kernel.org/show_bug.cgi?id=8941

Current Debian's kernel-modules depend on matching linux-image-$version, though
Linux's make deb-pkg build a .deb that 'Provides: kernel-image-$version' only.
The following patch adds the Debian-compliant 'Provides', leaving the default
one; hopely this will make way all happy.

Signed-off-by: paolo <oopla@users.sf.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 15:15:53 +02:00
Andi Kleen
4c87b948b2 x86_64: Support x86_64 in make buildtar
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:56:56 -07:00
Rolf Eike Beer
a5fa393b54 kbuild: fix "mkdir -p" usage in scripts/package/mkspec
"mkdir -p" does not only mean not to complain if the directory already
exists, but also to create the parent directories if needed. This patch
removes "lib" from the list of directories to create as we will also create
"lib/modules".

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25 10:55:44 +02:00
Mike Wolf
1a0f3d422b kbuild: fix make rpm for powerpc
The default target for most powerpc platforms is zImage.  The
zImage however is in arch/powerpc/boot and the mkspec script
was set up to get the kernel from the top level of the kernel
tree.  This patch copies vmlinux to arch/powerpc/boot and then
copies the kernel to the tmp directory so the rpm can be made.

Signed-off-by: Mike Wolf <mjw@us.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08 20:18:49 +02:00
Sam Ravnborg
0131705d58 kbuild: replace PHONY with FORCE
.PHONY: does not take patterns so use FORCE to achive same effect.
Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08 18:39:05 +01:00
Paul Smith
4f1933620f kbuild: change kbuild to not rely on incorrect GNU make behavior
The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed.  This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
  - Keep all targets that are to be marked .PHONY in a variable, PHONY.
  - Add .PHONY: $(PHONY) to mark them properly.
  - Remove any $(PHONY) files from the $? list when determining whether
    targets are up-to-date or not.

Signed-off-by: Paul Smith <psmith@gnu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-06 00:09:51 +01:00
Jan-Benedict Glaw
6073aa643f kbuild: tar-pkg with out-out-tree building
Fix out-of-tree builds for the tar-pkg targets

When I wrote the buildtar script, I didn't even think about
out-of-tree builds because I didn't use these back then. This patch
throughoutly uses ${objtree} instead of `pwd`.

Also, the kernel version is no longer manually built. Instead, it will
properly use $KERNELRELEASE .  Installing modules is only done if
CONFIG_MODULES is set.

Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-01 19:31:30 +01:00
Coywolf Qi Hunt
d178817803 [PATCH] kbuild: make help binrpm-pkg fix
This fixes kbuild make help binrpm-pkg missing `''.

Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-21 21:45:47 +00:00
Sam Ravnborg
a91f98a284 kbuild: Fix bug in make deb-pkg when using seperate source and output directories
From: Ryan Anderson <ryan@michonline.com>

When running "make O=something deb-pkg", I get a failure that claims I
haven't configured my kernel (I have).  Running it a second time tells
me to run "make mrproper"  (include/linux/version.h got built on the
first run)

Original patch from:
From: Ajay Patel <patela@gmail.com>

With modifications from:
Signed-off-By: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14 20:26:09 +00:00
Sam Ravnborg
dc5962fdf1 uml: Restore proper descriptions in make deb-pkg target
From: Ryan Anderson <ryan@michonline.com>

This pulls the description from the Debian user-mode-linux package, and
puts $version back in the appropriate places for both descriptions.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14 20:24:56 +00:00
Sam Ravnborg
687c3dac59 uml: Make deb-pkg build target build a Debian-style user-mode-linux package
From: Ryan Anderson <ryan@michonline.com>

Make the deb-pkg build target understand the "um" arch and set up the
package and directory structure to match a mainline-Debian style
user-mode-linux package.

This is primarily so that it stops matching, exactly, the naming
convention used by normal, non-UML kernels generated by this command.

Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel
doesn't do the right thing.  This fixes that.

Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14 20:24:00 +00:00
Yum Rayan
be3cef986f [PATCH] kbuild: restrain output of "make help" to 80 columns
This patch fixes the output of "make help" to fit in a 80 column
screen. Please push upstream as part of your other patches.

Signed-off-by: Yum Rayan <yum.rayan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-13 22:54:57 +00:00
Greg Edwards
d2cb1a95c5 [PATCH] kbuild: add ia64 support to rpm Makefile target
On ia64, only the EFI (fat) partition is available to boot from.  The rpm
needs to install the kernel under /boot/efi to be useable on ia64.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-13 21:08:33 +00:00
Jan-Benedict Glaw
6d983feab8 [PATCH] kbuild: create tarballs
It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)

Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-12 22:40:17 +00:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00