Commit Graph

746 Commits

Author SHA1 Message Date
David Howells
9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds
34699403e9 IEEE 1394 (FireWire) subsystem updates post v3.3:
- Some SBP-2 initiator fixes, side product from ongoing work on a target.
   - Reintroduction of an isochronous I/O feature of the older ieee1394 driver
     stack (flush buffer completions); it was evidently rarely used but not
     actually unused.  Matching libraw1394 code is already available.
   - Be sure to prefix all kernel log messages with device name or card name,
     and other logging related cleanups.
   - Misc other small cleanups, among them a small API change that affects
     sound/firewire/ too.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJPa5I1AAoJEHnzb7JUXXnQvUoQAMl9PhUk5ZFhWp0AOnQ4uLhI
 lEfRnUp94kGBdazBhxM9wtAwZRAeXUev/JyxwymMKSG40dMTbuxqRcs71v6a+ifd
 VqNctL0yUncrOw/92l+TG2t/hWttB4u+dTKYX2U5yza42+uUHWMZb7MzmV+qVYc8
 H+NR71WLQM4wkWdX8LBxmdeAOm0X635cjKsC/5FX9dws7q1ebSoxs4q4iIaGR7W8
 ETWx5lh/UVyR7c9T+VIr0jfQWdsm2IcmHr/+nldlesePZ1gRjIEi69ErEnGxTkGe
 NLPwt9lWuFXgWWHBON7C/rLmBA+NSys9lbvRAsPXrb3GpOKlde81c7U7Kr/kmEkh
 hB9oM2Qh0A/7sglvIZiDUP565lqOAbXSJzziG3+0XgOP2zsxukm5gSecF8qM8tHY
 IDwN05R9+nc26NA5TOfaRWx08n9SqTxq4V326oz9WMuK4bosCEfg4dvMwyMK/V3i
 AyipAl2YYIG/2JURMFcGSKbw33dBw3mRsS8XG3MXwzagUMw/8tSyZKQIwF9qO4si
 69QV7+CJoEfbJiLJMZJnKrRjfU+ZVRNA/xFuHUmhpmvYIbN8iJVGpGZABfXBUcH0
 c1+qX9zE4NEAUEylbgn5raYSY6otF51O8QJzQOn2HRddBQSDpEwhkOGVfZ7zcSLH
 sjAOn9qLIMHnrxUXxBDP
 =oWbr
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter:

 - Some SBP-2 initiator fixes, side product from ongoing work on a target.

 - Reintroduction of an isochronous I/O feature of the older ieee1394 driver
   stack (flush buffer completions); it was evidently rarely used but not
   actually unused.  Matching libraw1394 code is already available.

 - Be sure to prefix all kernel log messages with device name or card name,
   and other logging related cleanups.

 - Misc other small cleanups, among them a small API change that affects
   sound/firewire/ too. Clemens Ladisch is aware of it.

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits)
  firewire: allow explicit flushing of iso packet completions
  firewire: prevent dropping of completed iso packet header data
  firewire: ohci: factor out iso completion flushing code
  firewire: ohci: simplify iso header pointer arithmetic
  firewire: ohci: optimize control bit checks
  firewire: ohci: remove unused excess_bytes field
  firewire: ohci: copy_iso_headers(): make comment match the code
  firewire: cdev: fix IR multichannel event documentation
  firewire: ohci: fix too-early completion of IR multichannel buffers
  firewire: ohci: move runtime debug facility out of #ifdef
  firewire: tone down some diagnostic log messages
  firewire: sbp2: replace a GFP_ATOMIC allocation
  firewire: sbp2: Fix SCSI sense data mangling
  firewire: sbp2: Ignore SBP-2 targets on the local node
  firewire: sbp2: Take into account Unit_Unique_ID
  firewire: nosy: Use the macro DMA_BIT_MASK().
  firewire: core: convert AR-req handler lock from _irqsave to _bh
  firewire: core: fix race at address_handler unregistration
  firewire: core: remove obsolete comment
  firewire: core: prefix log messages with card name
  ...
2012-03-22 20:31:15 -07:00
Clemens Ladisch
d1bbd20972 firewire: allow explicit flushing of iso packet completions
Extend the kernel and userspace APIs to allow reporting all currently
completed isochronous packets, even if the next interrupt packet has not
yet been reached.  This is required to determine the status of the
packets at the end of a paused or stopped stream, and useful for more
precise synchronization of audio streams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch
18d627113b firewire: prevent dropping of completed iso packet header data
The buffer for the header data of completed iso packets has a fixed
size, so it is possible to configure a stream with a big interval
between interrupt packets or with big headers so that this buffer would
overflow.  Previously, ohci.c would drop any data that would not fit,
but this could make unsuspecting applications believe that fewer than
the actual number of packets have completed.

Instead of dropping data, add calls to flush_iso_completion() so that
there are as many events as needed to report all of the data.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch
910e76c607 firewire: ohci: factor out iso completion flushing code
In preparation for the following patches that add more flushing, move
the code for flushing accumulated header data into a common function.
The timestamp of the last completed packed is passed through the context
structure instead of a function parameter to allow accessing this value
later outside of the handle_i?_packet functions.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:39 +01:00
Clemens Ladisch
73864012f3 firewire: ohci: simplify iso header pointer arithmetic
When storing the header data of completed iso packets, we effectively
treat the buffers as arrays of quadlets.  Actually declaring the
pointers as u32* avoids repetitive pointer arithmetic, removes the
unhelpfully named "i" variables, and thus makes the code clearer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch
90fcc89873 firewire: ohci: optimize control bit checks
Doing the endian conversion on the constant instead of the memory
field allows the compiler to do the conversion at compile time.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch
b9b5bbfda6 firewire: ohci: remove unused excess_bytes field
Commit 6498ba04ae (remove unused dualbuffer IR code) overlooked
a field in struct iso_context.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch
32c507f7b7 firewire: ohci: copy_iso_headers(): make comment match the code
The comment incorrectly talked about one little-endian quadlet, while
there are actually two.  Furthermore, the endianness of the remaining
headers depends on whatever protocol is used, so don't mention them.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18 22:15:38 +01:00
Clemens Ladisch
0c0efbacab firewire: ohci: fix too-early completion of IR multichannel buffers
handle_ir_buffer_fill() assumed that a completed descriptor would be
indicated by a non-zero transfer_status (as in most other descriptors).
However, this field is written by the controller as soon as (the end of)
the first packet has been written into the buffer.  As a consequence, if
we happen to run into such a descriptor when the interrupt handler is
executed after such a packet has completed, the descriptor would be
taken out of the list of active descriptors as soon as the buffer had
been partially filled, so the event for the buffer being completely
filled would never be sent.

To fix this, handle descriptors only when they have been completely
filled, i.e., when res_count == 0.  (This also matches the condition
that is reported by the controller with an interrupt.)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-17 11:07:26 +01:00
Stefan Richter
cfda62baa4 firewire: ohci: move runtime debug facility out of #ifdef
CONFIG_FIREWIRE_OHCI_DEBUG could have been exposed to kernel tweakers
if CONFIG_EXPERT was set.  But in hindsight, this stuff is far too
useful to omit it.  So get rid of two #else branches that are only
going to bitrot otherwise.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Stefan Richter
98466cc450 firewire: tone down some diagnostic log messages
The "skipped bus generations" message was added together with the
respective fw_device retaining/ reviving code in order to see how it all
works out.  It did well, so don't spam the log anymore.

The "register access failure" situation still needs an actual handler.
But at this point it makes less sense to ask folks to send mails about
it.  We now have a pretty good picture of what controllers emit this and
when:

Texas Instruments PCIxx21 FireWire + CardBus + flash memory card
controller:
https://bugzilla.redhat.com/show_bug.cgi?id=608544

O2 Micro FireWire + flash memory card controller:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/881688
http://marc.info/?l=linux1394-devel&m=132309283531423
http://marc.info/?l=linux1394-devel&m=132368567907469
http://marc.info/?l=linux1394-devel&m=132516165727468
http://marc.info/?l=linux1394-devel&m=133006486927699

Pinnacle Movieboard:
commit 7f7e37115a
http://marc.info/?l=linux1394-devel&m=130714243325962

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Stefan Richter
c13ccfcf66 firewire: sbp2: replace a GFP_ATOMIC allocation
sbp2_send_management_orb() is called by sbp2_login, sbp2_reconnect, and
sbp2_remove, all which are able to sleep during memory allocations.
Actually, sbp2_send_management_orb() itself is a sleeping function.

Login and remove could allocate with GFP_KERNEL but reconnect needs
GFP_NOIO to ensure progress in low memory situations.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10 17:41:19 +01:00
Chris Boot
6503de6545 firewire: sbp2: Fix SCSI sense data mangling
SCSI sense data in SBP-2/3 is carried in an unusual format that means we
have to un-mangle it on our end before we pass it to the SCSI subsystem.
Currently our un-mangling code doesn't quite follow the SBP-2 standard
in that we always assume Current and never Deferred error types, we
never set the VALID bit, and we mishandle the FILEMARK, EOM and ILI
bits.

This patch fixes the sense un-mangling to correctly handle those and
follow the spec.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:02 +01:00
Chris Boot
74044563a2 firewire: sbp2: Ignore SBP-2 targets on the local node
The firewire-sbp2 module tries to login to an SBP-2/3 target even when
it is running on the local node, which fails because of the inability to
fetch data from DMA mapped regions using firewire transactions on the
local node. It also doesn't make much sense to have the initiator and
target on the same node, so this patch prevents this behaviour.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changed the comment)
2012-02-22 22:36:02 +01:00
Chris Boot
8ff6a75744 firewire: sbp2: Take into account Unit_Unique_ID
If the target's unit directory contains a Unit_Unique_ID entry, we
should use that as the target's GUID for identification purposes. The
SBP-2 standards document says:

"Although the node unique ID (EUI-64) present in the bus information
block is sufficient to uniquely identify nodes attached to Serial Bus,
it is insufficient to identify a target when a vendor implements a
device with multiple Serial Bus node connections. In this case initiator
software requires information by which a particular target may be
uniquely identified, regardless of the Serial Bus access path used."

[ IEEE T10 P1155D Revision 4, Section 7.6 (page 51) ] and
[ IEEE T10 P1467D Revision 5, Section 7.9 (page 74) ]

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
santosh nayak
e894d1d7fd firewire: nosy: Use the macro DMA_BIT_MASK().
Use the macro DMA_BIT_MASK instead of the constant  0xffffffff

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter
ea102d0ec4 firewire: core: convert AR-req handler lock from _irqsave to _bh
fw_core_handle_request() is called by the low-level driver in tasklet
context or process context, and fw_core_add/remove_address_handler() is
called by mid- or high-level code in process context.  So convert
address_handler_lock accesses from those which disable local IRQs to
ones which just disable local softIRQs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter
90963f1cdb firewire: core: fix race at address_handler unregistration
Fix the following unlikely but possible race:

CPU 1                             CPU 2
------------------------------------------------------------------------
AR-request tasklet
    lookup handler
                                  unregister handler
				  free handler->callback_data or handler
    call handler->callback

The application which registered the handler has no way to stop nodes
sending new requests to their address range, hence cannot prevent this
race.

Fix it simply by extending the address_handler_lock-protected region
from only around the lookup to around both lookup and call.  We only
need to do so in the exclusive region handler; the FCP region handler
already holds the lock around the handler->callback call.

Alas this removes the current ability to execute the callback in
parallel on different CPUs if it was called for different FireWire cards
at the same time.  (For a single card, the handler is already
serialized.)  If this loss of a rather obscure feature is not tolerable,
a more complex fix would be required:  Add a handler reference counter;
wait in fw_core_remove_address_handler() for this conter to become zero.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:01 +01:00
Stefan Richter
280f64d4f1 firewire: core: remove obsolete comment
Target-like applications or peer-to-peer-like applications require the
global address handler registration which we have right now, or a per-
card registration.  And node lookup, while it would be nice to have,
would be impossible in the brief time between self-ID-complete event and
completion of firewire-core's topology scanning.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter
26b4950de1 firewire: core: prefix log messages with card name
Associate all log messages from firewire-core with the respective card
because some people have more than one card.  E.g.
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core: created device fw0: GUID 0814438400000389, S800
    firewire_core: phy config: new root=ffc1, gap_count=5
    firewire_core: created device fw1: GUID 0814438400000388, S800
    firewire_core: created device fw2: GUID 0001d202e06800d1, S800
turns into
    firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0
    firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800
    firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5
    firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800
    firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800

This increases the module size slightly; to keep this in check, turn the
former printk wrapper macros into functions.  Their implementation is
largely copied from driver core's dev_printk counterparts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter
8408dc1c14 firewire: net: use dev_printk API
Change the log line prefix from "firewire_net: " to "net firewire0: "
etc. for the case that several RFC 2734 interfaces are being used in the
same machine.

Note, the netdev_printk API is not very useful to firewire-net.
netdev_notice(net, "abc\n") would result in irritating messages like
"firewire_ohci 0000:0a:00.0: firewire0: abc".  Nor would a dev_printk on
the fw_unit.device to which firewire-net is being bound be useful,
because there are generally multiple ones of those per interface (from
all RFC 2734 peers on the bus, the local node being only one of them).

In the initialization message of each interface, log the PCI device
name of the card which is parent of the netdevice instead of the GUID
of the peer which was semi-randomly used to establish the netdevice.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter
59759ff6f1 firewire: net: identify to driver core as "firewire_net", not "net"
On second thought, there is little reason to have driver name differ
from module name.  Therefore, change
    /sys/bus/firewire/drivers/net
    /sys/bus/firewire/devices/fw0.0/driver -> [...]/net
    /sys/module/firewire_net/drivers/firewire:net
to
    /sys/bus/firewire/drivers/firewire_net
    /sys/bus/firewire/devices/fw0.0/driver -> [...]/firewire_net
    /sys/module/firewire_net/drivers/firewire:firewire_net
It is redundant but consistent with firewire-sbp2's recently changed
driver name.

I don't see this anywhere used, so it should not matter either way.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:36:00 +01:00
Stefan Richter
0c22ecdebb firewire: sbp2: identify to driver core as "firewire_sbp2", not "sbp2"
Commit eba9ebaaa2 "firewire: sbp2: use dev_printk API" changed
messages from e.g.
    firewire_sbp2: fw3.0: logged in to LUN 0000 (0 retries)
to
    sbp2 fw3.0: logged in to LUN 0000 (0 retries)
because the driver calls itself as "sbp2" when registering with driver
core and with SCSI core.  This is of course confusing, so switch to the
name "firewire_sbp2" for driver core in order to match what lsmod and
/sys/module/ show.  So we are back to
    firewire_sbp2 fw3.0: logged in to LUN 0000 (0 retries)
in the kernel log.

This also changes
    /sys/bus/firewire/drivers/sbp2
    /sys/bus/firewire/devices/fw3.0/driver -> [...]/sbp2
    /sys/module/firewire_sbp2/drivers/firewire:sbp2
to
    /sys/bus/firewire/drivers/firewire_sbp2
    /sys/bus/firewire/devices/fw3.0/driver -> [...]/firewire_sbp2
    /sys/module/firewire_sbp2/drivers/firewire:firewire_sbp2

but "cat /sys/class/scsi_host/host27/proc_name" stays "sbp2" just in
case that proc_name is used by any userland.

The transport detection in lsscsi is not affected.  (Tested with lsscsi
version 0.25.)  Udev's /dev/disk/by-id and by-path symlinks are not
affected either.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-02-22 22:35:59 +01:00
Stefan Richter
320cfa6ce0 firewire: ohci: disable MSI on Ricoh controllers
The PCIe device

    FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller
    [1180:e832] (prog-if 10 [OHCI])

is unable to access attached FireWire devices when MSI is enabled but
works if MSI is disabled.
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html

Hence add the "disable MSI" quirks flag for this device, or in fact for
safety and simplicity for all current (R5U230, R5U231, R5U240) and
future Ricoh PCIe 1394 controllers.

Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-30 21:33:34 +01:00
Clemens Ladisch
d1bb399ad0 firewire: ohci: add reset packet quirk for SB Audigy
The Audigy's SB1394 controller is actually from Texas Instruments
and has the same bus reset packet generation bug, so it needs the
same quirk entry.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-26 22:53:17 +01:00
Stefan Richter
eba9ebaaa2 firewire: sbp2: use dev_printk API
All messages are uniformly prefixed by driver name and device name now.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:21 +01:00
Stefan Richter
64d2172019 firewire: ohci: use dev_printk API
All messages are uniformly prefixed by driver name and device name now.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:21 +01:00
Stefan Richter
2107622684 firewire: move fw_device reference counting from drivers to core
fw_unit device drivers invariably need to talk to the fw_unit's parent
(an fw_device) and grandparent (an fw_card).  firewire-core already
maintains an fw_card reference for the entire lifetime of an fw_device.
Likewise, let firewire-core maintain an fw_device reference for the
entire lifetime of an fw_unit so that fw_unit drivers don't have to.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15 18:37:20 +01:00
Rusty Russell
90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Paul Gortmaker
823467e5fc drivers/firewire: Add export.h for EXPORT_SYMBOL to core-iso.c
Ensure that the EXPORT_SYMBOL macros are present for when we clean up
the "module.h" is everywhere situation, to prevent build failures.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:46 -04:00
Clemens Ladisch
a572e688cf firewire: ohci: fix isochronous DMA synchronization
Add the dma_sync_single_* calls necessary to ensure proper cache
synchronization for isochronous data buffers on non-coherent
architectures.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-18 12:32:39 +02:00
Clemens Ladisch
32eaeae177 firewire: ohci: work around selfID junk due to wrong gap count
If a device's firmware initiates a bus reset by setting the IBR bit in
PHY register 1 without resetting the gap count field to 63 (and without
having sent a PHY configuration packet beforehand), the gap count of
this node will remain at the old value after the bus reset and thus be
inconsistent with the gap count on all other nodes.

The bus manager is supposed to detect the inconsistent gap count values
in the self ID packets and correct them by issuing another bus reset.

However, if the buggy device happens to be the cycle master, and if it
sends a cycle start packet immediately after the bus reset (which is
likely after a long bus reset), then the time between the end of the
selfID phase and the start of the cycle start packet will be based on
the too-small gap count value, so this gap will be too short to be
detected as a subaction gap by the other nodes.  This means that the
cycle start packet will be assumed to be self ID data, and will be
stored after the actual self ID quadlets in the self ID buffer.

This garbage in the self ID buffer made firewire-core ignore all of the
self ID data, and thus prevented the Linux bus manager from correcting
the problem.  Furthermore, because the bus reset handling was aborted
completely, asynchronous transfers would be no longer handled correctly,
and fw_run_transaction() would hang until the next bus reset.

To fix this, make the detection of inconsistent self IDs more
discriminating:  If the invalid data in the self ID buffer looks like
a cycle start packet, we can assume that the previous data in the buffer
is correctly received self ID information, and process it normally.

(We inspect only the first quadlet of the cycle start packet, because
this value is different enough from any valid self ID quadlet, and many
controllers do not store the cycle start packet in five quadlets because
they expect self ID data to have an even number of quadlets.)

This bug has been observed when a bus-powered DesktopKonnekt6 is
switched off with its power button.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-18 12:32:39 +02:00
Stephan Gatzka
a74477db91 firewire: net: Use posted writes
Change memory region to ohci "middle address space". This effectively
reduces the number of packets by 50%.

[Stefan R.:]  This eliminates 1394 ack packets and improved throughput
by a few percent in some tests with an S400a connection with and without
gap count optimization.  Since firewire-net taxes the AR-req DMA unit of
a FireWire controller much more than firewire-sbp2 (which uses the
middle address space with PCI posted writes too), this commit also
changes a related error printk into a ratelimited one as a precaution.

Side note:  The IPv4-over-1394 drivers of Mac OS X 10.4, Windows XP SP3,
and the Thesycon 1394 bus driver for Windows all use the middle address
space too.

Signed-off-by: Stephan Gatzka <stephan@gatzka.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09 17:00:18 +02:00
Stefan Richter
4ec4a67aa1 firewire: use clamp and min3 macros
Use kernel.h's convenience macros.  Also omit a printk that should never
happen and won't matter much if it ever happened.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09 17:00:18 +02:00
Stefan Richter
b810e4ae11 firewire: ohci: optimize TSB41BA3D detection
Takes less source code and machine code, and less runtime with PHYs
other than TSB41BA3D (e.g. TSB81BA3 with device ID 0x831304 which takes
one instead of six read_paged_phy_reg now).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09 17:00:17 +02:00
Stefan Richter
28897fb73c firewire: ohci: TSB41BA3D support tweaks
Fix:  phy_reg_mutex must be held over the write/read_phy_reg pair which
gets PHY port status.

Only print to the log when a TSB41BA3D was found.  By far most TSB82AA2
cards have a TSB81BA3, and firewire-ohci can keep quiet about that.

Shorten some strings and comments.  Change some whitespace.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09 17:00:17 +02:00
Stephan Gatzka
25935ebebd firewire: ohci: Add support for TSB41BA3D phy
This patch implements a work around for the Texas Instruments PHY
TSB41BA3D.  This phy has a bug at least in combination with the TI LLCs
TSB82AA2B and TSB12LV26.  The selfid coming from the locally connected
phy is not propagated into the selfid buffer of the OHCI (see
http://www.ti.com/litv/pdf/sllz059 for details).  The main idea is to
construct the selfid ourselves.

Signed-off-by: Stephan Gatzka <stephan@gatzka.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16 22:30:28 +02:00
Stephan Gatzka
2d7a36e233 firewire: ohci: Move code from the bus reset tasklet into a workqueue
Code inside bus_reset_work may now sleep. This is a prerequisite to
support a phy from Texas Instruments cleanly. The patch to support this
phy will be submitted later.

Signed-off-by: Stephan Gatzka <stephan@gatzka.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16 22:30:28 +02:00
Stefan Richter
32ce38f403 firewire: sbp2: fold two functions into one
sbp2_release_target() is folded into its primary user, sbp2_remove().
The only other caller, a failure path in sbp2_probe(), now uses
sbp2_remove().  This adds unnecessary cancel_delayed_work_sync() calls
to that failure path but results in less code and text.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16 22:23:56 +02:00
Stefan Richter
b2af07b684 firewire: sbp2: move some code to more sensible places
Implement sbp2_queue_work(), which is now a very simple accessor to one
of the struct sbp2_logical_unit members, right after the definition of
struct sbp2_logical_unit.

Put the sbp2_reconnect() implementation right after the sbp2_login()
implementation.  They are both part of the SBP-2 access protocol.

Implement the driver methods sbp2_probe(), spp2_update(), sbp2_remove()
in this order, reflecting the lifetime of an SBP-2 target.

Place the sbp2_release_target() implementation right next to
sbp2_remove() which is its primary user, and after sbp2_probe() which is
the counterpart to sbp2_release_target().

There are no changes to the implementations here, or at least not meant
to be.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16 22:23:56 +02:00
Stefan Richter
6ff8147d07 firewire: sbp2: remove obsolete reference counting
Since commit 0278ccd9d5 "firewire: sbp2:
fix panic after rmmod with slow targets", the lifetime of an sbp2_target
instance does no longer extent past the return of sbp2_remove().
Therefore it is no longer necessary to call fw_unit_get/put() and
fw_device_get/put() in sbp2_probe/remove().

Furthermore, said commit also ensures that lu->work is not going to be
executed or requeued at a time when the sbp2_target is no longer in use.
Hence there is no need for sbp2_target reference counting for lu->work.

Other concurrent contexts:

  - Processes which access the sysfs of the SCSI host device or of one
    of its subdevices are safe because these interfaces are all removed
    by scsi_remove_device/host() in sbp2_release_target().

  - SBP-2 command block ORB transactions are finished when
    scsi_remove_device() in sbp2_release_target() returns.

  - SBP-2 management ORB transactions are finished when
    cancel_delayed_work_sync(&lu->work) before sbp2_release_target()
    returns.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16 22:23:56 +02:00
Ming Lei
f39aa30d77 firewire: ohci: add no MSI quirk for O2Micro controller
This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719 .

An O2Micro PCI Express FireWire controller,
"FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Device [1217:11f7] (rev 05)"
which is a combination device together with an SDHCI controller and some
sort of storage controller, misses SBP-2 status writes from an attached
FireWire HDD.  This problem goes away if MSI is disabled for this
FireWire controller.

The device reportedly does not require QUIRK_CYCLE_TIMER.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (amended changelog)
Cc: <stable@kernel.org>
2011-09-16 22:22:10 +02:00
Linus Torvalds
219f358e0b Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix panic after rmmod with slow targets
2011-08-27 09:32:08 -07:00
Chris Boot
0278ccd9d5 firewire: sbp2: fix panic after rmmod with slow targets
If firewire-sbp2 starts a login to a target that doesn't complete ORBs
in a timely manner (and has to retry the login), and the module is
removed before the operation times out, you end up with a null-pointer
dereference and a kernel panic.

[SR:  This happens because sbp2_target_get/put() do not maintain
module references.  scsi_device_get/put() do, but at occasions like
Chris describes one, nobody holds a reference to an SBP-2 sdev.]

This patch cancels pending work for each unit in sbp2_remove(), which
hopefully means there are no extra references around that prevent us
from unloading. This fixes my crash.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-23 00:44:35 +02:00
Linus Torvalds
3210d190dc Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: handle ack_busy when fetching the Config ROM
2011-08-21 18:13:19 -07:00
Linus Torvalds
6f02bfc404 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix DMA unmapping in an error path
  firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases
2011-08-15 08:40:49 -07:00
Stefan Richter
aaff12039f firewire: core: handle ack_busy when fetching the Config ROM
Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110,
Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is
sent immediately after they sent a response to a prior transaction.
This causes firewire-core to fail probing of the camcorder with "giving
up on config rom for node id ...".  Consequently, programs like kino or
dvgrab are unaware of the presence of a camcorder.

Such transaction failures happen also with the ieee1394 driver stack
(of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower
likelihood, such that kino or dvgrab are generally able to use these
camcorders via the older driver stack.  The cause for firewire-ohci's or
firewire-core's worse behavior is not yet known.  Gap count optimization
in firewire-core is not the cause.  Perhaps the slightly higher latency
of transaction completion in the older stack plays a role.  (ieee1394:
AR-resp DMA context tasklet -> packet completion ktread -> user process;
firewire-core: tasklet -> user process.)

This change introduces retries and delays after ack_busy_X into
firewire-core's Config ROM reader, such that at least firewire-core's
probing and /dev/fw* creation are successful.  This still leaves the
problem that userland processes are facing transaction failures.
gscanbus's built-in retry routines deal with them successfully, but
neither kino's nor dvgrab's do ever succeed.

But at least DV capture with "dvgrab -noavc -card 0" works now.  Live
video preview in kino works too, but not actual capture.

One way to prevent Configuration ROM reading failures in application
programs is to modify libraw1394 to synthesize read responses by means
of firewire-core's Configuration ROM cache.  This would only leave
CMP and FCP transaction failures as a potential problem source for
applications.

Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk>
Reported-and-tested-by: René Fritz <rene@colorcube.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-13 13:53:30 +02:00
Stefan Richter
a01e836087 firewire: ohci: fix DMA unmapping in an error path
If request_irq failed, we would pass wrong arguments to
dma_free_coherent.  https://bugzilla.redhat.com/show_bug.cgi?id=728185

Reported-by: Mads Kiilerich
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12 15:30:08 +02:00