Commit Graph

13992 Commits

Author SHA1 Message Date
Pengfei Li
688fcbfc06 mm/vmalloc: modify struct vmap_area to reduce its size
Objective
---------

The current implementation of struct vmap_area wasted space.

After applying this commit, sizeof(struct vmap_area) has been
reduced from 11 words to 8 words.

Description
-----------

1) Pack "subtree_max_size", "vm" and "purge_list".  This is no problem
   because

A) "subtree_max_size" is only used when vmap_area is in "free" tree

B) "vm" is only used when vmap_area is in "busy" tree

C) "purge_list" is only used when vmap_area is in vmap_purge_list

2) Eliminate "flags".

;Since only one flag VM_VM_AREA is being used, and the same thing can be
done by judging whether "vm" is NULL, then the "flags" can be eliminated.

Link: http://lkml.kernel.org/r/20190716152656.12255-3-lpf.vector@gmail.com
Signed-off-by: Pengfei Li <lpf.vector@gmail.com>
Suggested-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:10 -07:00
Uladzislau Rezki (Sony)
dd3b8353ba mm/vmalloc: do not keep unpurged areas in the busy tree
The busy tree can be quite big, even though the area is freed or unmapped
it still stays there until "purge" logic removes it.

1) Optimize and reduce the size of "busy" tree by removing a node from
   it right away as soon as user triggers free paths.  It is possible to
   do so, because the allocation is done using another augmented tree.

The vmalloc test driver shows the difference, for example the
"fix_size_alloc_test" is ~11% better comparing with default configuration:

sudo ./test_vmalloc.sh performance

<default>
Summary: fix_size_alloc_test loops: 1000000 avg: 993985 usec
Summary: full_fit_alloc_test loops: 1000000 avg: 973554 usec
Summary: long_busy_list_alloc_test loops: 1000000 avg: 12617652 usec
<default>

<this patch>
Summary: fix_size_alloc_test loops: 1000000 avg: 882263 usec
Summary: full_fit_alloc_test loops: 1000000 avg: 973407 usec
Summary: long_busy_list_alloc_test loops: 1000000 avg: 12593929 usec
<this patch>

2) Since the busy tree now contains allocated areas only and does not
   interfere with lazily free nodes, introduce the new function
   show_purge_info() that dumps "unpurged" areas that is propagated
   through "/proc/vmallocinfo".

3) Eliminate VM_LAZY_FREE flag.

Link: http://lkml.kernel.org/r/20190716152656.12255-2-lpf.vector@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Pengfei Li <lpf.vector@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:10 -07:00
Alastair D'Silva
5ed867037e mm/sparse.c: remove NULL check in clear_hwpoisoned_pages()
There is no possibility for memmap to be NULL in the current codebase.

This check was added in commit 95a4774d05 ("memory-hotplug: update
mce_bad_pages when removing the memory") where memmap was originally
inited to NULL, and only conditionally given a value.

The code that could have passed a NULL has been removed by commit
ba72b4c8cf ("mm/sparsemem: support sub-section hotplug"), so there is no
longer a possibility that memmap can be NULL.

Link: http://lkml.kernel.org/r/20190829035151.20975-1-alastair@d-silva.org
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Alastair D'Silva
9f82883c6d mm/sparse.c: don't manually decrement num_poisoned_pages
Use the function written to do it instead.

Link: http://lkml.kernel.org/r/20190827053656.32191-2-alastair@au1.ibm.com
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Wei Yang
c1cbc3eebf mm/sparse.c: use __nr_to_section(section_nr) to get mem_section
__pfn_to_section is defined as __nr_to_section(pfn_to_section_nr(pfn)).

Since we already get section_nr, it is not necessary to get mem_section
from start_pfn. By doing so, we reduce one redundant operation.

Link: http://lkml.kernel.org/r/20190809010242.29797-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Lecopzer Chen
db57e98d87 mm/sparse.c: fix ALIGN() without power of 2 in sparse_buffer_alloc()
The size argument passed into sparse_buffer_alloc() has already been
aligned with PAGE_SIZE or PMD_SIZE.

If the size after aligned is not power of 2 (e.g.  0x480000), the
PTR_ALIGN() will return wrong value.  Use roundup to round sparsemap_buf
up to next multiple of size.

Link: http://lkml.kernel.org/r/20190705114826.28586-1-lecopzer.chen@mediatek.com
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mark-PK Tsai <Mark-PK.Tsai@mediatek.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Lecopzer Chen
ae83189405 mm/sparse.c: fix memory leak of sparsemap_buf in aligned memory
sparse_buffer_alloc(xsize) gets the size of memory from sparsemap_buf
after being aligned with the size.  However, the size is at least
PAGE_ALIGN(sizeof(struct page) * PAGES_PER_SECTION) and usually larger
than PAGE_SIZE.

Also, sparse_buffer_fini() only frees memory between sparsemap_buf and
sparsemap_buf_end, since sparsemap_buf may be changed by PTR_ALIGN()
first, the aligned space before sparsemap_buf is wasted and no one will
touch it.

In our ARM32 platform (without SPARSEMEM_VMEMMAP)
  Sparse_buffer_init
    Reserve d359c000 - d3e9c000 (9M)
  Sparse_buffer_alloc
    Alloc   d3a00000 - d3E80000 (4.5M)
  Sparse_buffer_fini
    Free    d3e80000 - d3e9c000 (~=100k)
 The reserved memory between d359c000 - d3a00000 (~=4.4M) is unfreed.

In ARM64 platform (with SPARSEMEM_VMEMMAP)

  sparse_buffer_init
    Reserve ffffffc07d623000 - ffffffc07f623000 (32M)
  Sparse_buffer_alloc
    Alloc   ffffffc07d800000 - ffffffc07f600000 (30M)
  Sparse_buffer_fini
    Free    ffffffc07f600000 - ffffffc07f623000 (140K)
 The reserved memory between ffffffc07d623000 - ffffffc07d800000
 (~=1.9M) is unfreed.

Let's explicit free redundant aligned memory.

[arnd@arndb.de: mark sparse_buffer_free as __meminit]
  Link: http://lkml.kernel.org/r/20190709185528.3251709-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20190705114730.28534-1-lecopzer.chen@mediatek.com
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mark-PK Tsai <Mark-PK.Tsai@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Souptick Joarder
29a90db929 mm/memory_hotplug.c: s/is/if
Correct typo in comment.

Link: http://lkml.kernel.org/r/1568233954-3913-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
ca9a46f8a4 mm/memory_hotplug: online_pages cannot be 0 in online_pages()
walk_system_ram_range() will fail with -EINVAL in case
online_pages_range() was never called (== no resource applicable in the
range).  Otherwise, we will always call online_pages_range() with nr_pages
> 0 and, therefore, have online_pages > 0.

Remove that special handling.

Link: http://lkml.kernel.org/r/20190814154109.3448-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
bd02cc01d3 mm/memory_hotplug: make sure the pfn is aligned to the order when onlining
Commit a9cd410a3d ("mm/page_alloc.c: memory hotplug: free pages as
higher order") assumed that any PFN we get via memory resources is aligned
to to MAX_ORDER - 1, I am not convinced that is always true.  Let's play
safe, check the alignment and fallback to single pages.

akpm: warn in this situation so we get to find out if and why this ever
occurs.

[akpm@linux-foundation.org: add WARN_ON_ONCE()]
Link: http://lkml.kernel.org/r/20190814154109.3448-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
b2c2ab208e mm/memory_hotplug: simplify online_pages_range()
online_pages always corresponds to nr_pages.  Simplify the code, getting
rid of online_pages_blocks().  Add some comments.

Link: http://lkml.kernel.org/r/20190814154109.3448-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
5ecae6359e mm/memory_hotplug: drop PageReserved() check in online_pages_range()
move_pfn_range_to_zone() will set all pages to PG_reserved via
memmap_init_zone().  The only way a page could no longer be reserved would
be if a MEM_GOING_ONLINE notifier would clear PG_reserved - which is not
done (the online_page callback is used for that purpose by e.g., Hyper-V
instead).  walk_system_ram_range() will never call online_pages_range()
with duplicate PFNs, so drop the PageReserved() check.

This seems to be a leftover from ancient times where the memmap was
initialized when adding memory and we wanted to check for already onlined
memory.

Link: http://lkml.kernel.org/r/20190814154109.3448-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Wei Yang
33fce0113d mm/memory_hotplug.c: prevent memory leak when reusing pgdat
When offlining a node in try_offline_node(), pgdat is not released.  So
that pgdat could be reused in hotadd_new_pgdat().  While we reallocate
pgdat->per_cpu_nodestats if this pgdat is reused.

This patch prevents the memory leak by just allocating per_cpu_nodestats
when it is a new pgdat.

Link: http://lkml.kernel.org/r/20190813020608.10194-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
b6c88d3b9d drivers/base/memory.c: don't store end_section_nr in memory blocks
Each memory block spans the same amount of sections/pages/bytes.  The size
is determined before the first memory block is created.  No need to store
what we can easily calculate - and the calculations even look simpler now.

Michal brought up the idea of variable-sized memory blocks.  However, if
we ever implement something like this, we will need an API compatibility
switch and reworks at various places (most code assumes a fixed memory
block size).  So let's cleanup what we have right now.

While at it, fix the variable naming in register_mem_sect_under_node() -
we no longer talk about a single section.

Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
David Hildenbrand
3fccb74cf3 mm/memory_hotplug: remove move_pfn_range()
Let's remove this indirection.  We need the zone in the caller either way,
so let's just detect it there.  Add some documentation for
move_pfn_range_to_zone() instead.

[akpm@linux-foundation.org: restore newline, per David]
Link: http://lkml.kernel.org/r/20190724142324.3686-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Kefeng Wang
6aa9b8b2c6 mm: do not hash address in print_bad_pte()
Using %px to show the actual address in print_bad_pte()
to help us to debug issue.

Link: http://lkml.kernel.org/r/20190831011816.141002-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Nicholas Piggin
13224794cb mm: remove quicklist page table caches
Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:09 -07:00
Minchan Kim
7b167b6810 mm: release the spinlock on zap_pte_range
In our testing (camera recording), Miguel and Wei found
unmap_page_range() takes above 6ms with preemption disabled easily.
When I see that, the reason is it holds page table spinlock during
entire 512 page operation in a PMD.  6.2ms is never trivial for user
experince if RT task couldn't run in the time because it could make
frame drop or glitch audio problem.

I had a time to benchmark it via adding some trace_printk hooks between
pte_offset_map_lock and pte_unmap_unlock in zap_pte_range.  The testing
device is 2018 premium mobile device.

I can get 2ms delay rather easily to release 2M(ie, 512 pages) when the
task runs on little core even though it doesn't have any IPI and LRU
lock contention.  It's already too heavy.

If I remove activate_page, 35-40% overhead of zap_pte_range is gone so
most of overhead(about 0.7ms) comes from activate_page via
mark_page_accessed.  Thus, if there are LRU contention, that 0.7ms could
accumulate up to several ms.

So this patch adds a check for need_resched() in the loop, and a
preemption point if necessary.

Link: http://lkml.kernel.org/r/20190731061440.GC155569@google.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Miguel de Dios <migueldedios@google.com>
Reported-by: Wei Wang <wvw@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Wei Yang
9da99f20ec mm: remove redundant assignment of entry
Since ptent will not be changed after previous assignment of entry, it is
not necessary to do the assignment again.

Link: http://lkml.kernel.org/r/20190708082740.21111-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
akpm@linux-foundation.org
2d15eb31b5 mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
[11~From: John Hubbard <jhubbard@nvidia.com>
Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock()

Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()",
v3.

There are about 50+ patches in my tree [2], and I'll be sending out the
remaining ones in a few more groups:

* The block/bio related changes (Jerome mostly wrote those, but I've had
  to move stuff around extensively, and add a little code)

* mm/ changes

* other subsystem patches

* an RFC that shows the current state of the tracking patch set.  That
  can only be applied after all call sites are converted, but it's good to
  get an early look at it.

This is part a tree-wide conversion, as described in fc1d8e7cca ("mm:
introduce put_user_page*(), placeholder versions").

This patch (of 3):

Provide more capable variation of put_user_pages_dirty_lock(), and delete
put_user_pages_dirty().  This is based on the following:

1.  Lots of call sites become simpler if a bool is passed into
   put_user_page*(), instead of making the call site choose which
   put_user_page*() variant to call.

2.  Christoph Hellwig's observation that set_page_dirty_lock() is
   usually correct, and set_page_dirty() is usually a bug, or at least
   questionable, within a put_user_page*() calling chain.

This leads to the following API choices:

    * put_user_pages_dirty_lock(page, npages, make_dirty)

    * There is no put_user_pages_dirty(). You have to
      hand code that, in the rare case that it's
      required.

[jhubbard@nvidia.com: remove unused variable in siw_free_plist()]
  Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com
Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Johannes Weiner
1ba6fc9af3 mm: vmscan: do not share cgroup iteration between reclaimers
One of our services observed a high rate of cgroup OOM kills in the
presence of large amounts of clean cache.  Debugging showed that the
culprit is the shared cgroup iteration in page reclaim.

Under high allocation concurrency, multiple threads enter reclaim at the
same time.  Fearing overreclaim when we first switched from the single
global LRU to cgrouped LRU lists, we introduced a shared iteration state
for reclaim invocations - whether 1 or 20 reclaimers are active
concurrently, we only walk the cgroup tree once: the 1st reclaimer
reclaims the first cgroup, the second the second one etc.  With more
reclaimers than cgroups, we start another walk from the top.

This sounded reasonable at the time, but the problem is that reclaim
concurrency doesn't scale with allocation concurrency.  As reclaim
concurrency increases, the amount of memory individual reclaimers get to
scan gets smaller and smaller.  Individual reclaimers may only see one
cgroup per cycle, and that may not have much reclaimable memory.  We see
individual reclaimers declare OOM when there is plenty of reclaimable
memory available in cgroups they didn't visit.

This patch does away with the shared iterator, and every reclaimer is
allowed to scan the full cgroup tree and see all of reclaimable memory,
just like it would on a non-cgrouped system.  This way, when OOM is
declared, we know that the reclaimer actually had a chance.

To still maintain fairness in reclaim pressure, disallow cgroup reclaim
from bailing out of the tree walk early.  Kswapd and regular direct
reclaim already don't bail, so it's not clear why limit reclaim would have
to, especially since it only walks subtrees to begin with.

This change completely eliminates the OOM kills on our service, while
showing no signs of overreclaim - no increased scan rates, %sys time, or
abrupt free memory spikes.  I tested across 100 machines that have 64G of
RAM and host about 300 cgroups each.

[ It's possible overreclaim never was a *practical* issue to begin
  with - it was simply a concern we had on the mailing lists at the
  time, with no real data to back it up. But we have also added more
  bail-out conditions deeper inside reclaim (e.g. the proportional
  exit in shrink_node_memcg) since. Regardless, now we have data that
  suggests full walks are more reliable and scale just fine. ]

Link: http://lkml.kernel.org/r/20190812192316.13615-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Roman Gushchin
e1a366be5c mm: memcontrol: switch to rcu protection in drain_all_stock()
Commit 72f0184c8a ("mm, memcg: remove hotplug locking from try_charge")
introduced css_tryget()/css_put() calls in drain_all_stock(), which are
supposed to protect the target memory cgroup from being released during
the mem_cgroup_is_descendant() call.

However, it's not completely safe.  In theory, memcg can go away between
reading stock->cached pointer and calling css_tryget().

This can happen if drain_all_stock() races with drain_local_stock()
performed on the remote cpu as a result of a work, scheduled by the
previous invocation of drain_all_stock().

The race is a bit theoretical and there are few chances to trigger it, but
the current code looks a bit confusing, so it makes sense to fix it
anyway.  The code looks like as if css_tryget() and css_put() are used to
protect stocks drainage.  It's not necessary because stocked pages are
holding references to the cached cgroup.  And it obviously won't work for
works, scheduled on other cpus.

So, let's read the stock->cached pointer and evaluate the memory cgroup
inside a rcu read section, and get rid of css_tryget()/css_put() calls.

Link: http://lkml.kernel.org/r/20190802192241.3253165-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Chris Down
0e4b01df86 mm, memcg: throttle allocators when failing reclaim over memory.high
We're trying to use memory.high to limit workloads, but have found that
containment can frequently fail completely and cause OOM situations
outside of the cgroup.  This happens especially with swap space -- either
when none is configured, or swap is full.  These failures often also don't
have enough warning to allow one to react, whether for a human or for a
daemon monitoring PSI.

Here is output from a simple program showing how long it takes in usec
(column 2) to allocate a megabyte of anonymous memory (column 1) when a
cgroup is already beyond its memory high setting, and no swap is
available:

    [root@ktst ~]# systemd-run -p MemoryHigh=100M -p MemorySwapMax=1 \
    > --wait -t timeout 300 /root/mdf
    [...]
    95  1035
    96  1038
    97  1000
    98  1036
    99  1048
    100 1590
    101 1968
    102 1776
    103 1863
    104 1757
    105 1921
    106 1893
    107 1760
    108 1748
    109 1843
    110 1716
    111 1924
    112 1776
    113 1831
    114 1766
    115 1836
    116 1588
    117 1912
    118 1802
    119 1857
    120 1731
    [...]
    [System OOM in 2-3 seconds]

The delay does go up extremely marginally past the 100MB memory.high
threshold, as now we spend time scanning before returning to usermode, but
it's nowhere near enough to contain growth.  It also doesn't get worse the
more pages you have, since it only considers nr_pages.

The current situation goes against both the expectations of users of
memory.high, and our intentions as cgroup v2 developers.  In
cgroup-v2.txt, we claim that we will throttle and only under "extreme
conditions" will memory.high protection be breached.  Likewise, cgroup v2
users generally also expect that memory.high should throttle workloads as
they exceed their high threshold.  However, as seen above, this isn't
always how it works in practice -- even on banal setups like those with no
swap, or where swap has become exhausted, we can end up with memory.high
being breached and us having no weapons left in our arsenal to combat
runaway growth with, since reclaim is futile.

It's also hard for system monitoring software or users to tell how bad the
situation is, as "high" events for the memcg may in some cases be benign,
and in others be catastrophic.  The current status quo is that we fail
containment in a way that doesn't provide any advance warning that things
are about to go horribly wrong (for example, we are about to invoke the
kernel OOM killer).

This patch introduces explicit throttling when reclaim is failing to keep
memcg size contained at the memory.high setting.  It does so by applying
an exponential delay curve derived from the memcg's overage compared to
memory.high.  In the normal case where the memcg is either below or only
marginally over its memory.high setting, no throttling will be performed.

This composes well with system health monitoring and remediation, as these
allocator delays are factored into PSI's memory pressure calculations.
This both creates a mechanism system administrators or applications
consuming the PSI interface to trivially see that the memcg in question is
struggling and use that to make more reasonable decisions, and permits
them enough time to act.  Either of these can act with significantly more
nuance than that we can provide using the system OOM killer.

This is a similar idea to memory.oom_control in cgroup v1 which would put
the cgroup to sleep if the threshold was violated, but it's also
significantly improved as it results in visible memory pressure, and also
doesn't schedule indefinitely, which previously made tracing and other
introspection difficult (ie.  it's clamped at 2*HZ per allocation through
MEMCG_MAX_HIGH_DELAY_JIFFIES).

Contrast the previous results with a kernel with this patch:

    [root@ktst ~]# systemd-run -p MemoryHigh=100M -p MemorySwapMax=1 \
    > --wait -t timeout 300 /root/mdf
    [...]
    95  1002
    96  1000
    97  1002
    98  1003
    99  1000
    100 1043
    101 84724
    102 330628
    103 610511
    104 1016265
    105 1503969
    106 2391692
    107 2872061
    108 3248003
    109 4791904
    110 5759832
    111 6912509
    112 8127818
    113 9472203
    114 12287622
    115 12480079
    116 14144008
    117 15808029
    118 16384500
    119 16383242
    120 16384979
    [...]

As you can see, in the normal case, memory allocation takes around 1000
usec.  However, as we exceed our memory.high, things start to increase
exponentially, but fairly leniently at first.  Our first megabyte over
memory.high takes us 0.16 seconds, then the next is 0.46 seconds, then the
next is almost an entire second.  This gets worse until we reach our
eventual 2*HZ clamp per batch, resulting in 16 seconds per megabyte.
However, this is still making forward progress, so permits tracing or
further analysis with programs like GDB.

We use an exponential curve for our delay penalty for a few reasons:

1. We run mem_cgroup_handle_over_high to potentially do reclaim after
   we've already performed allocations, which means that temporarily
   going over memory.high by a small amount may be perfectly legitimate,
   even for compliant workloads. We don't want to unduly penalise such
   cases.
2. An exponential curve (as opposed to a static or linear delay) allows
   ramping up memory pressure stats more gradually, which can be useful
   to work out that you have set memory.high too low, without destroying
   application performance entirely.

This patch expands on earlier work by Johannes Weiner. Thanks!

[akpm@linux-foundation.org: fix max() warning]
[akpm@linux-foundation.org: fix __udivdi3 ref on 32-bit]
[akpm@linux-foundation.org: fix it even more]
[chris@chrisdown.name: fix 64-bit divide even more]
Link: http://lkml.kernel.org/r/20190723180700.GA29459@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Matthew Wilcox (Oracle)
4101196b19 mm: page cache: store only head pages in i_pages
Transparent Huge Pages are currently stored in i_pages as pointers to
consecutive subpages.  This patch changes that to storing consecutive
pointers to the head page in preparation for storing huge pages more
efficiently in i_pages.

Large parts of this are "inspired" by Kirill's patch
https://lore.kernel.org/lkml/20170126115819.58875-2-kirill.shutemov@linux.intel.com/

Kirill and Huang Ying contributed several fixes.

[willy@infradead.org: use compound_nr, squish uninit-var warning]
Link: http://lkml.kernel.org/r/20190731210400.7419-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Kirill Shutemov <kirill@shutemov.name>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Tested-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Tested-by: Qian Cai <cai@lca.pw>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Konstantin Khlebnikov
875d91b11a mm/filemap.c: rewrite mapping_needs_writeback in less fancy manner
This actually checks that writeback is needed or in progress.

Link: http://lkml.kernel.org/r/156378817069.1087.1302816672037672488.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Konstantin Khlebnikov
c3aab9a0bd mm/filemap.c: don't initiate writeback if mapping has no dirty pages
Functions like filemap_write_and_wait_range() should do nothing if inode
has no dirty pages or pages currently under writeback.  But they anyway
construct struct writeback_control and this does some atomic operations if
CONFIG_CGROUP_WRITEBACK=y - on fast path it locks inode->i_lock and
updates state of writeback ownership, on slow path might be more work.
Current this path is safely avoided only when inode mapping has no pages.

For example generic_file_read_iter() calls filemap_write_and_wait_range()
at each O_DIRECT read - pretty hot path.

This patch skips starting new writeback if mapping has no dirty tags set.
If writeback is already in progress filemap_write_and_wait_range() will
wait for it.

Link: http://lkml.kernel.org/r/156378816804.1087.8607636317907921438.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Vlastimil Babka
8974558f49 mm, page_owner, debug_pagealloc: save and dump freeing stack trace
The debug_pagealloc functionality is useful to catch buggy page allocator
users that cause e.g.  use after free or double free.  When page
inconsistency is detected, debugging is often simpler by knowing the call
stack of process that last allocated and freed the page.  When page_owner
is also enabled, we record the allocation stack trace, but not freeing.

This patch therefore adds recording of freeing process stack trace to page
owner info, if both page_owner and debug_pagealloc are configured and
enabled.  With only page_owner enabled, this info is not useful for the
memory leak debugging use case.  dump_page() is adjusted to print the
info.  An example result of calling __free_pages() twice may look like
this (note the page last free stack trace):

BUG: Bad page state in process bash  pfn:13d8f8
page:ffffc31984f63e00 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1affff800000000()
raw: 01affff800000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
page_owner tracks the page as freed
page last allocated via order 0, migratetype Unmovable, gfp_mask 0xcc0(GFP_KERNEL)
 prep_new_page+0x143/0x150
 get_page_from_freelist+0x289/0x380
 __alloc_pages_nodemask+0x13c/0x2d0
 khugepaged+0x6e/0xc10
 kthread+0xf9/0x130
 ret_from_fork+0x3a/0x50
page last free stack trace:
 free_pcp_prepare+0x134/0x1e0
 free_unref_page+0x18/0x90
 khugepaged+0x7b/0xc10
 kthread+0xf9/0x130
 ret_from_fork+0x3a/0x50
Modules linked in:
CPU: 3 PID: 271 Comm: bash Not tainted 5.3.0-rc4-2.g07a1a73-default+ #57
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
 dump_stack+0x85/0xc0
 bad_page.cold+0xba/0xbf
 rmqueue_pcplist.isra.0+0x6c5/0x6d0
 rmqueue+0x2d/0x810
 get_page_from_freelist+0x191/0x380
 __alloc_pages_nodemask+0x13c/0x2d0
 __get_free_pages+0xd/0x30
 __pud_alloc+0x2c/0x110
 copy_page_range+0x4f9/0x630
 dup_mmap+0x362/0x480
 dup_mm+0x68/0x110
 copy_process+0x19e1/0x1b40
 _do_fork+0x73/0x310
 __x64_sys_clone+0x75/0x80
 do_syscall_64+0x6e/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f10af854a10
...

Link: http://lkml.kernel.org/r/20190820131828.22684-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Vlastimil Babka
37389167a2 mm, page_owner: keep owner info when freeing the page
For debugging purposes it might be useful to keep the owner info even
after page has been freed, and include it in e.g.  dump_page() when
detecting a bad page state.  For that, change the PAGE_EXT_OWNER flag
meaning to "page owner info has been set at least once" and add new
PAGE_EXT_OWNER_ACTIVE for tracking whether page is supposed to be
currently tracked allocated or free.  Adjust dump_page() accordingly,
distinguishing free and allocated pages.  In the page_owner debugfs file,
keep printing only allocated pages so that existing scripts are not
confused, and also because free pages are irrelevant for the memory
statistics or leak detection that's the typical use case of the file,
anyway.

Link: http://lkml.kernel.org/r/20190820131828.22684-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Vlastimil Babka
7e2f2a0cd1 mm, page_owner: record page owner for each subpage
Patch series "debug_pagealloc improvements through page_owner", v2.

The debug_pagealloc functionality serves a similar purpose on the page
allocator level that slub_debug does on the kmalloc level, which is to
detect bad users.  One notable feature that slub_debug has is storing
stack traces of who last allocated and freed the object.  On page level we
track allocations via page_owner, but that info is discarded when freeing,
and we don't track freeing at all.  This series improves those aspects.
With both debug_pagealloc and page_owner enabled, we can then get bug
reports such as the example in Patch 4.

SLUB debug tracking additionally stores cpu, pid and timestamp.  This could
be added later, if deemed useful enough to justify the additional page_ext
structure size.

This patch (of 3):

Currently, page owner info is only recorded for the first page of a
high-order allocation, and copied to tail pages in the event of a split
page.  With the plan to keep previous owner info after freeing the page,
it would be benefical to record page owner for each subpage upon
allocation.  This increases the overhead for high orders, but that should
be acceptable for a debugging option.

The order stored for each subpage is the order of the whole allocation.
This makes it possible to calculate the "head" pfn and to recognize "tail"
pages (quoted because not all high-order allocations are compound pages
with true head and tail pages).  When reading the page_owner debugfs file,
keep skipping the "tail" pages so that stats gathered by existing scripts
don't get inflated.

Link: http://lkml.kernel.org/r/20190820131828.22684-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Yu Zhao
e7a1aaf287 mm: replace list_move_tail() with add_page_to_lru_list_tail()
This is a cleanup patch that replaces two historical uses of
list_move_tail() with relatively recent add_page_to_lru_list_tail().

Link: http://lkml.kernel.org/r/20190716212436.7137-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Matthew Wilcox (Oracle)
d8c6546b1a mm: introduce compound_nr()
Replace 1 << compound_order(page) with compound_nr(page).  Minor
improvements in readability.

Link: http://lkml.kernel.org/r/20190721104612.19120-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Matthew Wilcox (Oracle)
a50b854e07 mm: introduce page_size()
Patch series "Make working with compound pages easier", v2.

These three patches add three helpers and convert the appropriate
places to use them.

This patch (of 3):

It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).

Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
YueHaibing
1f18b29669 mm/rmap.c: remove set but not used variable 'cstart'
Fixes gcc '-Wunused-but-set-variable' warning:

mm/rmap.c: In function page_mkclean_one:
mm/rmap.c:906:17: warning: variable cstart set but not used [-Wunused-but-set-variable]

It is not used any more since
commit cdb07bdea2 ("mm/rmap.c: remove redundant variable cend")

Link: http://lkml.kernel.org/r/20190724141453.38536-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Christophe JAILLET
dbf7684e29 mm/page_poison.c: fix a typo in a comment
s/posioned/poisoned/

Link: http://lkml.kernel.org/r/20190721180908.6534-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Walter Wu
ae8f06b31a kasan: add memory corruption identification for software tag-based mode
Add memory corruption identification at bug report for software tag-based
mode.  The report shows whether it is "use-after-free" or "out-of-bound"
error instead of "invalid-access" error.  This will make it easier for
programmers to see the memory corruption problem.

We extend the slab to store five old free pointer tag and free backtrace,
we can check if the tagged address is in the slab record and make a good
guess if the object is more like "use-after-free" or "out-of-bound".
therefore every slab memory corruption can be identified whether it's
"use-after-free" or "out-of-bound".

[aryabinin@virtuozzo.com: simplify & clenup code]
  Link: https://lkml.kernel.org/r/3318f9d7-a760-3cc8-b700-f06108ae745f@virtuozzo.com]
Link: http://lkml.kernel.org/r/20190821180332.11450-1-aryabinin@virtuozzo.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Qian Cai
0e965a6bda mm/kmemleak.c: record the current memory pool size
The only way to obtain the current memory pool size for a running kernel
is to check the kernel config file which is inconvenient.  Record it in
the kernel messages.

[akpm@linux-foundation.org: s/memory pool size/memory pool/available/, per Catalin]
Link: http://lkml.kernel.org/r/1565809631-28933-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Catalin Marinas
c566586818 mm: kmemleak: use the memory pool for early allocations
Currently kmemleak uses a static early_log buffer to trace all memory
allocation/freeing before the slab allocator is initialised.  Such early
log is replayed during kmemleak_init() to properly initialise the kmemleak
metadata for objects allocated up that point.  With a memory pool that
does not rely on the slab allocator, it is possible to skip this early log
entirely.

In order to remove the early logging, consider kmemleak_enabled == 1 by
default while the kmem_cache availability is checked directly on the
object_cache and scan_area_cache variables.  The RCU callback is only
invoked after object_cache has been initialised as we wouldn't have any
concurrent list traversal before this.

In order to reduce the number of callbacks before kmemleak is fully
initialised, move the kmemleak_init() call to mm_init().

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: remove WARN_ON(), per Catalin]
Link: http://lkml.kernel.org/r/20190812160642.52134-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Catalin Marinas
0647398a8c mm: kmemleak: simple memory allocation pool for kmemleak objects
Add a memory pool for struct kmemleak_object in case the normal
kmem_cache_alloc() fails under the gfp constraints passed by the caller.
The mem_pool[] array size is currently fixed at 16000.

We are not using the existing mempool kernel API since this requires
the slab allocator to be available (for pool->elements allocation).  A
subsequent kmemleak patch will replace the static early log buffer with
the pool allocation introduced here and this functionality is required
to be available before the slab was initialised.

Link: http://lkml.kernel.org/r/20190812160642.52134-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Catalin Marinas
dba82d9431 mm: kmemleak: make the tool tolerant to struct scan_area allocation failures
Patch series "mm: kmemleak: Use a memory pool for kmemleak object
allocations", v3.

Following the discussions on v2 of this patch(set) [1], this series takes
slightly different approach:

- it implements its own simple memory pool that does not rely on the
  slab allocator

- drops the early log buffer logic entirely since it can now allocate
  metadata from the memory pool directly before kmemleak is fully
  initialised

- CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option is renamed to
  CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE

- moves the kmemleak_init() call earlier (mm_init())

- to avoid a separate memory pool for struct scan_area, it makes the
  tool robust when such allocations fail as scan areas are rather an
  optimisation

[1] http://lkml.kernel.org/r/20190727132334.9184-1-catalin.marinas@arm.com

This patch (of 3):

Object scan areas are an optimisation aimed to decrease the false
positives and slightly improve the scanning time of large objects known to
only have a few specific pointers.  If a struct scan_area fails to
allocate, kmemleak can still function normally by scanning the full
object.

Introduce an OBJECT_FULL_SCAN flag and mark objects as such when scan_area
allocation fails.

Link: http://lkml.kernel.org/r/20190812160642.52134-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Qian Cai
9d5f0be0f7 mm/slub.c: fix -Wunused-function compiler warnings
tid_to_cpu() and tid_to_event() are only used in note_cmpxchg_failure()
when SLUB_DEBUG_CMPXCHG=y, so when SLUB_DEBUG_CMPXCHG=n by default, Clang
will complain that those unused functions.

Link: http://lkml.kernel.org/r/1568752232-5094-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Waiman Long
9adeaa2269 mm, slab: move memcg_cache_params structure to mm/slab.h
The memcg_cache_params structure is only embedded into the kmem_cache of
slab and slub allocators as defined in slab_def.h and slub_def.h and used
internally by mm code.  There is no needed to expose it in a public
header.  So move it from include/linux/slab.h to mm/slab.h.  It is just a
refactoring patch with no code change.

In fact both the slub_def.h and slab_def.h should be moved into the mm
directory as well, but that will probably cause many merge conflicts.

Link: http://lkml.kernel.org/r/20190718180827.18758-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Waiman Long
04f768a39d mm, slab: extend slab/shrink to shrink all memcg caches
Currently, a value of '1" is written to /sys/kernel/slab/<slab>/shrink
file to shrink the slab by flushing out all the per-cpu slabs and free
slabs in partial lists.  This can be useful to squeeze out a bit more
memory under extreme condition as well as making the active object counts
in /proc/slabinfo more accurate.

This usually applies only to the root caches, as the SLUB_MEMCG_SYSFS_ON
option is usually not enabled and "slub_memcg_sysfs=1" not set.  Even if
memcg sysfs is turned on, it is too cumbersome and impractical to manage
all those per-memcg sysfs files in a real production system.

So there is no practical way to shrink memcg caches.  Fix this by enabling
a proper write to the shrink sysfs file of the root cache to scan all the
available memcg caches and shrink them as well.  For a non-root memcg
cache (when SLUB_MEMCG_SYSFS_ON or slub_memcg_sysfs is on), only that
cache will be shrunk when written.

On a 2-socket 64-core 256-thread arm64 system with 64k page after
a parallel kernel build, the the amount of memory occupied by slabs
before shrinking slabs were:

 # grep task_struct /proc/slabinfo
 task_struct        53137  53192   4288   61    4 : tunables    0    0
 0 : slabdata    872    872      0
 # grep "^S[lRU]" /proc/meminfo
 Slab:            3936832 kB
 SReclaimable:     399104 kB
 SUnreclaim:      3537728 kB

After shrinking slabs (by echoing "1" to all shrink files):

 # grep "^S[lRU]" /proc/meminfo
 Slab:            1356288 kB
 SReclaimable:     263296 kB
 SUnreclaim:      1092992 kB
 # grep task_struct /proc/slabinfo
 task_struct         2764   6832   4288   61    4 : tunables    0    0
 0 : slabdata    112    112      0

Link: http://lkml.kernel.org/r/20190723151445.7385-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:07 -07:00
Vitaly Wool
3f9d2b5766 z3fold: fix retry mechanism in page reclaim
z3fold_page_reclaim()'s retry mechanism is broken: on a second iteration
it will have zhdr from the first one so that zhdr is no longer in line
with struct page.  That leads to crashes when the system is stressed.

Fix that by moving zhdr assignment up.

While at it, protect against using already freed handles by using own
local slots structure in z3fold_page_reclaim().

Link: http://lkml.kernel.org/r/20190908162919.830388dc7404d1e2c80f4095@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Reported-by: Markus Linnala <markus.linnala@gmail.com>
Reported-by: Chris Murphy <bugzilla@colorremedies.com>
Reported-by: Agustin Dall'Alba <agustin@dallalba.com.ar>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:06 -07:00
Vitaly Wool
6e73fd25e2 Revert "mm/z3fold.c: fix race between migration and destruction"
With the original commit applied, z3fold_zpool_destroy() may get blocked
on wait_event() for indefinite time.  Revert this commit for the time
being to get rid of this problem since the issue the original commit
addresses is less severe.

Link: http://lkml.kernel.org/r/20190910123142.7a9c8d2de4d0acbc0977c602@gmail.com
Fixes: d776aaa989 ("mm/z3fold.c: fix race between migration and destruction")
Reported-by: Agustín Dall'Alba <agustin@dallalba.com.ar>
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:06 -07:00
Linus Torvalds
84da111de0 hmm related patches for 5.4
This is more cleanup and consolidation of the hmm APIs and the very
 strongly related mmu_notifier interfaces. Many places across the tree
 using these interfaces are touched in the process. Beyond that a cleanup
 to the page walker API and a few memremap related changes round out the
 series:
 
 - General improvement of hmm_range_fault() and related APIs, more
   documentation, bug fixes from testing, API simplification &
   consolidation, and unused API removal
 
 - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
   make them internal kconfig selects
 
 - Hoist a lot of code related to mmu notifier attachment out of drivers by
   using a refcount get/put attachment idiom and remove the convoluted
   mmu_notifier_unregister_no_release() and related APIs.
 
 - General API improvement for the migrate_vma API and revision of its only
   user in nouveau
 
 - Annotate mmu_notifiers with lockdep and sleeping region debugging
 
 Two series unrelated to HMM or mmu_notifiers came along due to
 dependencies:
 
 - Allow pagemap's memremap_pages family of APIs to work without providing
   a struct device
 
 - Make walk_page_range() and related use a constant structure for function
   pointers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl1/nnkACgkQOG33FX4g
 mxqaRg//c6FqowV1pQlLutvAOAgMdpzfZ9eaaDKngy9RVQxz+k/MmJrdRH/p/mMA
 Pq93A1XfwtraGKErHegFXGEDk4XhOustVAVFwvjyXO41dTUdoFVUkti6ftbrl/rS
 6CT+X90jlvrwdRY7QBeuo7lxx7z8Qkqbk1O1kc1IOracjKfNJS+y6LTamy6weM3g
 tIMHI65PkxpRzN36DV9uCN5dMwFzJ73DWHp1b0acnDIigkl6u5zp6orAJVWRjyQX
 nmEd3/IOvdxaubAoAvboNS5CyVb4yS9xshWWMbH6AulKJv3Glca1Aa7QuSpBoN8v
 wy4c9+umzqRgzgUJUe1xwN9P49oBNhJpgBSu8MUlgBA4IOc3rDl/Tw0b5KCFVfkH
 yHkp8n6MP8VsRrzXTC6Kx0vdjIkAO8SUeylVJczAcVSyHIo6/JUJCVDeFLSTVymh
 EGWJ7zX2iRhUbssJ6/izQTTQyCH3YIyZ5QtqByWuX2U7ZrfkqS3/EnBW1Q+j+gPF
 Z2yW8iT6k0iENw6s8psE9czexuywa/Lttz94IyNlOQ8rJTiQqB9wLaAvg9hvUk7a
 kuspL+JGIZkrL3ouCeO/VA6xnaP+Q7nR8geWBRb8zKGHmtWrb5Gwmt6t+vTnCC2l
 olIDebrnnxwfBQhEJ5219W+M1pBpjiTpqK/UdBd92A4+sOOhOD0=
 =FRGg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull hmm updates from Jason Gunthorpe:
 "This is more cleanup and consolidation of the hmm APIs and the very
  strongly related mmu_notifier interfaces. Many places across the tree
  using these interfaces are touched in the process. Beyond that a
  cleanup to the page walker API and a few memremap related changes
  round out the series:

   - General improvement of hmm_range_fault() and related APIs, more
     documentation, bug fixes from testing, API simplification &
     consolidation, and unused API removal

   - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
     and make them internal kconfig selects

   - Hoist a lot of code related to mmu notifier attachment out of
     drivers by using a refcount get/put attachment idiom and remove the
     convoluted mmu_notifier_unregister_no_release() and related APIs.

   - General API improvement for the migrate_vma API and revision of its
     only user in nouveau

   - Annotate mmu_notifiers with lockdep and sleeping region debugging

  Two series unrelated to HMM or mmu_notifiers came along due to
  dependencies:

   - Allow pagemap's memremap_pages family of APIs to work without
     providing a struct device

   - Make walk_page_range() and related use a constant structure for
     function pointers"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
  libnvdimm: Enable unit test infrastructure compile checks
  mm, notifier: Catch sleeping/blocking for !blockable
  kernel.h: Add non_block_start/end()
  drm/radeon: guard against calling an unpaired radeon_mn_unregister()
  csky: add missing brackets in a macro for tlb.h
  pagewalk: use lockdep_assert_held for locking validation
  pagewalk: separate function pointers from iterator data
  mm: split out a new pagewalk.h header from mm.h
  mm/mmu_notifiers: annotate with might_sleep()
  mm/mmu_notifiers: prime lockdep
  mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
  mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
  mm/hmm: hmm_range_fault() infinite loop
  mm/hmm: hmm_range_fault() NULL pointer bug
  mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
  mm/mmu_notifiers: remove unregister_no_release
  RDMA/odp: remove ib_ucontext from ib_umem
  RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  ...
2019-09-21 10:07:42 -07:00
Linus Torvalds
671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00
Linus Torvalds
bc7d9aee3f Merge branch 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc mount API conversions from Al Viro:
 "Conversions to new API for shmem and friends and for mount_mtd()-using
  filesystems.

  As for the rest of the mount API conversions in -next, some of them
  belong in the individual trees (e.g. binderfs one should definitely go
  through android folks, after getting redone on top of their changes).
  I'm going to drop those and send the rest (trivial ones + stuff ACKed
  by maintainers) in a separate series - by that point they are
  independent from each other.

  Some stuff has already migrated into individual trees (NFS conversion,
  for example, or FUSE stuff, etc.); those presumably will go through
  the regular merges from corresponding trees."

* 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Make fs_parse() handle fs_param_is_fd-type params better
  vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API
  shmem_parse_one(): switch to use of fs_parse()
  shmem_parse_options(): take handling a single option into a helper
  shmem_parse_options(): don't bother with mpol in separate variable
  shmem_parse_options(): use a separate structure to keep the results
  make shmem_fill_super() static
  make ramfs_fill_super() static
  devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()
  vfs: Convert squashfs to use the new mount API
  mtd: Kill mount_mtd()
  vfs: Convert jffs2 to use the new mount API
  vfs: Convert cramfs to use the new mount API
  vfs: Convert romfs to use the new mount API
  vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-19 10:06:57 -07:00
Linus Torvalds
b41dae061b New code for 5.4:
- Remove KM_SLEEP/KM_NOSLEEP.
 - Ensure that memory buffers for IO are properly sector-aligned to avoid
   problems that the block layer doesn't check.
 - Make the bmap scrubber more efficient in its record checking.
 - Don't crash xfs_db when superblock inode geometry is corrupt.
 - Fix btree key helper functions.
 - Remove unneeded error returns for things that can't fail.
 - Fix buffer logging bugs in repair.
 - Clean up iterator return values.
 - Speed up directory entry creation.
 - Enable allocation of xattr value memory buffer during lookup.
 - Fix readahead racing with truncate/punch hole.
 - Other minor cleanups.
 - Fix one AGI/AGF deadlock with RENAME_WHITEOUT.
 - More BUG -> WARN whackamole.
 - Fix various problems with the log failing to advance under certain
   circumstances, which results in stalls during mount.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl1yhwsACgkQ+H93GTRK
 tOtTig//fYLgFVz3l6ffCb8WkJkmi7iWOJp3eLzK55+3W0++ThNsMlRTOWH7xCpZ
 f+3LEvvm1ILBgf4XVlwUGt2HlLmNZeKYmiOl/jZxCH25KdfILRIyeyacAYf9vIWf
 NQr5HOutsa1IfEDCiDwEnxuuVbgC+rN8j7Rlp/PpweXwRYjssqRWnGRgaZchLbyr
 JZ40D9J1HLooY/yftKrgnxtfL4rmAhPoGdX3DnZmobHYRpFHrY31Ks24w6ogShDu
 usczNeShXWlg31B4fVHo/rrVQ0xG77U+w/DTNvrAj0uvAlzvWVVibpaZjZtbhadO
 NM0zOG41BY/ExBAHhpg0ieVdYI7wNEftF9gjyT7cXO9soD1mRgH6UKQMCm+o1frF
 brtcpgQS2aEyGZaXGBIS23ziT/+LLGcav7LUeo7Rf6yiVoEA+FlsGaymC7l+FGCQ
 lcgHdeRkeukdj+GJlmpiedb+Xya2g464CXswW7JtCghdNsypRsI4OdQQ2r8Du+w0
 PUwfugv1cMAz99xfSZtSoTa7pimFxb6tHRcoqZVfQCefbKQ0VMJDU/AY7gQ2U3UM
 PiFKXgPFo0p4tUvA/9ECTPcMDhMKMv200CGCJKXrokWwHtJ6jrAHb+EobjrfoiyX
 +hkGEmzzt3vur7Zt2+YesCH3tZj1UfpsemOlorxYQk3hbsA9HEc=
 =TZLp
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "For this cycle we have the usual pile of cleanups and bug fixes, some
  performance improvements for online metadata scrubbing, massive
  speedups in the directory entry creation code, some performance
  improvement in the file ACL lookup code, a fix for a logging stall
  during mount, and fixes for concurrency problems.

  It has survived a couple of weeks of xfstests runs and merges cleanly.

  Summary:

   - Remove KM_SLEEP/KM_NOSLEEP.

   - Ensure that memory buffers for IO are properly sector-aligned to
     avoid problems that the block layer doesn't check.

   - Make the bmap scrubber more efficient in its record checking.

   - Don't crash xfs_db when superblock inode geometry is corrupt.

   - Fix btree key helper functions.

   - Remove unneeded error returns for things that can't fail.

   - Fix buffer logging bugs in repair.

   - Clean up iterator return values.

   - Speed up directory entry creation.

   - Enable allocation of xattr value memory buffer during lookup.

   - Fix readahead racing with truncate/punch hole.

   - Other minor cleanups.

   - Fix one AGI/AGF deadlock with RENAME_WHITEOUT.

   - More BUG -> WARN whackamole.

   - Fix various problems with the log failing to advance under certain
     circumstances, which results in stalls during mount"

* tag 'xfs-5.4-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (45 commits)
  xfs: push the grant head when the log head moves forward
  xfs: push iclog state cleaning into xlog_state_clean_log
  xfs: factor iclog state processing out of xlog_state_do_callback()
  xfs: factor callbacks out of xlog_state_do_callback()
  xfs: factor debug code out of xlog_state_do_callback()
  xfs: prevent CIL push holdoff in log recovery
  xfs: fix missed wakeup on l_flush_wait
  xfs: push the AIL in xlog_grant_head_wake
  xfs: Use WARN_ON_ONCE for bailout mount-operation
  xfs: Fix deadlock between AGI and AGF with RENAME_WHITEOUT
  xfs: define a flags field for the AG geometry ioctl structure
  xfs: add a xfs_valid_startblock helper
  xfs: remove the unused XFS_ALLOC_USERDATA flag
  xfs: cleanup xfs_fsb_to_db
  xfs: fix the dax supported check in xfs_ioctl_setattr_dax_invalidate
  xfs: Fix stale data exposure when readahead races with hole punch
  fs: Export generic_fadvise()
  mm: Handle MADV_WILLNEED through vfs_fadvise()
  xfs: allocate xattr buffer on demand
  xfs: consolidate attribute value copying
  ...
2019-09-18 18:32:43 -07:00
Linus Torvalds
e6bc9de714 Changes for 5.4:
- Prohibit writing to active swap files and swap partitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl1cDHQACgkQ+H93GTRK
 tOs1qw//aqXAQ7bpLDl7jx9CSuAighzKir0mHYFm9HUsnuRT6gLqIOVSeugoi8hY
 tYhPNzcKHL39YDa1QfKo1RKW6uCwsECHT/5TebLxBkTL3vGGAenPchAcjj89SV54
 lQ/h8O6hkDU+KCKC0kmDem7ma7DD5YZmWXDxW/HvnygjCnZ9BFaOeLQt/TPBmOmN
 lozPHcdrxhIuCuSTMjIZRq27Zl6uzj5tr+FkT+FWiYDrGhgWT7is6o397SEm7yYT
 3JqUQ+ZUOY4IwLlrWiVKqi0IqjvWqhaLzmjZaKF+YC8Ni0sdpaDdsE/uPSCyQ7k7
 28qbfypnu7bswakjcekdSX2Dj/SZivFb8AzlqaSIMVlw4STFzjMMYMLib8/OlPES
 z1pAjXHypLjNO3dNBYp/mRll+/BQ2NM6oCtnVVQGKVnlcx3oLo+n6JSRK8t74DTf
 BkYu93aybBpfE49Fb3VQum+9okg9BdShRxvUp023/WTUaa8aUyIbizn3iTrke/sx
 0bC+Vvdr33JZnoO8WKVzSd7COTHOTQ920NodTKAJ9bkF3WKyLM135ctavHrtdAg3
 FHBXpN7AjbOaLovLpiy3eb//ghKJwgyhqbN6VCGTudC/nkaXq7y7M3DPbXxQYxom
 yCA0qMByMg+cL4BtzS52QEda7xK1iiuQ/3jbdQ4lFuBHhwekVKs=
 =Ag/B
 -----END PGP SIGNATURE-----

Merge tag 'vfs-5.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull swap access updates from Darrick Wong:
 "Prohibit writing to active swap files and swap partitions.

  There's no non-malicious use case for allowing userspace to scribble
  on storage that the kernel thinks it owns"

* tag 'vfs-5.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: don't allow writes to swap files
  mm: set S_SWAPFILE on blockdev swap devices
2019-09-18 17:35:20 -07:00
Linus Torvalds
7ad67ca553 for-5.4/block-2019-09-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1/no0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmo9EACFXMbdNmEEUMyRSdOkVLlr7ZlTyQi1tLpB
 YESDPxdBfybzpi0qa8JSaysGIfvSkSjmSAqBqrWPmASOSOL6CK4bbA4fTYbgPplk
 XeHUdgGiG34oCQUn8Xil5reYaTm7I6LQWnWTpVa5fIhAyUYaGJL+987ykoGmpQmB
 Dvf3YSc+8H0RTp9PCMVd6UCGPkZbVlLImGad3PF5ULvTEaE4RCXC2aiAgh0p1l5A
 J2CkRZ+/mio3zN2O4YN7VdPGfr1Wo1iZ834xbIGLegv1miHXagFk7jwTcC7zIt5t
 oSnJnqIg3iCe7SpWt4Bkzw/zy/2UqaspifbCMgw8vychlViVRUHFO5h85Yboo7kQ
 OMLEQPcwjm6dTHv5h1iXF9LW1O7NoiYmmgvApU9uOo1HUrl1X7PZ3JEfUsVHxkOO
 T4D5igf0Krsl1eAbiwEUQzy7vFZ8PlRHqrHgK+fkyotzHu1BJR7OQkYygEfGFOB/
 EfMxplGDpmibYGuWCwDX2bPAmLV3SPUQENReHrfPJRDt5TD1UkFpVGv/PLLhbr0p
 cLYI78DKpDSigBpVMmwq5nTYpnex33eyDTTA8C0sakcsdzdmU5qv30y3wm4nTiep
 f6gZo6IMXwRg/rCgVVrd9SKQAr/8wEzVlsDW3qyi2pVT8sHIgm0tFv7paihXGdDV
 xsKgmTrQQQ==
 =Qt+h
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...
2019-09-17 16:57:47 -07:00
Linus Torvalds
1902314157 Merge branch 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
 "A couple of updates to clean up the code with no change in behavior"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: Use struct_size() helper
  percpu: fix typo in pcpu_setup_first_chunk() comment
  percpu: Make pcpu_setup_first_chunk() void function
2019-09-17 15:58:50 -07:00
Kees Cook
314eed30ed usercopy: Avoid HIGHMEM pfn warning
When running on a system with >512MB RAM with a 32-bit kernel built with:

	CONFIG_DEBUG_VIRTUAL=y
	CONFIG_HIGHMEM=y
	CONFIG_HARDENED_USERCOPY=y

all execve()s will fail due to argv copying into kmap()ed pages, and on
usercopy checking the calls ultimately of virt_to_page() will be looking
for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y:

 ------------[ cut here ]------------
 kernel BUG at ../arch/x86/mm/physaddr.c:83!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6
 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009
 EIP: __phys_addr+0xaf/0x100
 ...
 Call Trace:
  __check_object_size+0xaf/0x3c0
  ? __might_sleep+0x80/0xa0
  copy_strings+0x1c2/0x370
  copy_strings_kernel+0x2b/0x40
  __do_execve_file+0x4ca/0x810
  ? kmem_cache_alloc+0x1c7/0x370
  do_execve+0x1b/0x20
  ...

The check is from arch/x86/mm/physaddr.c:

	VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn);

Due to the kmap() in fs/exec.c:

		kaddr = kmap(kmapped_page);
	...
	if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ...

Now we can fetch the correct page to avoid the pfn check. In both cases,
hardened usercopy will need to walk the page-span checker (if enabled)
to do sanity checking.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescook
2019-09-17 15:20:17 -07:00
Linus Torvalds
7e67a85999 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:

 - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
   Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
   Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.

   As perf and the scheduler is getting bigger and more complex,
   document the status quo of current responsibilities and interests,
   and spread the review pain^H^H^H^H fun via an increase in the Cc:
   linecount generated by scripts/get_maintainer.pl. :-)

 - Add another series of patches that brings the -rt (PREEMPT_RT) tree
   closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
   into a new CONFIG_PREEMPTION category that will allow the eventual
   introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
   to go though.

 - Extend the CPU cgroup controller with uclamp.min and uclamp.max to
   allow the finer shaping of CPU bandwidth usage.

 - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).

 - Improve the behavior of high CPU count, high thread count
   applications running under cpu.cfs_quota_us constraints.

 - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.

 - Improve CPU isolation housekeeping CPU allocation NUMA locality.

 - Fix deadline scheduler bandwidth calculations and logic when cpusets
   rebuilds the topology, or when it gets deadline-throttled while it's
   being offlined.

 - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
   setscheduler() system calls without creating global serialization.
   Add new synchronization between cpuset topology-changing events and
   the deadline acceptance tests in setscheduler(), which were broken
   before.

 - Rework the active_mm state machine to be less confusing and more
   optimal.

 - Rework (simplify) the pick_next_task() slowpath.

 - Improve load-balancing on AMD EPYC systems.

 - ... and misc cleanups, smaller fixes and improvements - please see
   the Git log for more details.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  sched/psi: Correct overly pessimistic size calculation
  sched/fair: Speed-up energy-aware wake-ups
  sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
  sched/uclamp: Update CPU's refcount on TG's clamp changes
  sched/uclamp: Use TG's clamps to restrict TASK's clamps
  sched/uclamp: Propagate system defaults to the root group
  sched/uclamp: Propagate parent clamps
  sched/uclamp: Extend CPU's cgroup controller
  sched/topology: Improve load balancing on AMD EPYC systems
  arch, ia64: Make NUMA select SMP
  sched, perf: MAINTAINERS update, add submaintainers and reviewers
  sched/fair: Use rq_lock/unlock in online_fair_sched_group
  cpufreq: schedutil: fix equation in comment
  sched: Rework pick_next_task() slow-path
  sched: Allow put_prev_task() to drop rq->lock
  sched/fair: Expose newidle_balance()
  sched: Add task_struct pointer to sched_class::set_curr_task
  sched: Rework CPU hotplug task selection
  sched/{rt,deadline}: Fix set_next_task vs pick_next_task
  sched: Fix kerneldoc comment for ia64_set_curr_task
  ...
2019-09-16 17:25:49 -07:00
Ingo Molnar
563c4f85f9 Merge branch 'sched/rt' into sched/core, to pick up -rt changes
Pick up the first couple of patches working towards PREEMPT_RT.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-16 14:05:04 +02:00
David Howells
f32356261d vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API
Convert the ramfs, shmem, tmpfs, devtmpfs and rootfs filesystems to the new
internal mount API as the old one will be obsoleted and removed.  This
allows greater flexibility in communication of mount parameters between
userspace, the VFS and the filesystem.

See Documentation/filesystems/mount_api.txt for more information.

Note that tmpfs is slightly tricky as it can contain embedded commas, so it
can't be trivially split up using strsep() to break on commas in
generic_parse_monolithic().  Instead, tmpfs has to supply its own generic
parser.

However, if tmpfs changes, then devtmpfs and rootfs, which are wrappers
around tmpfs or ramfs, must change too - and thus so must ramfs, so these
had to be converted also.

[AV: rewritten]

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hugh Dickins <hughd@google.com>
cc: linux-mm@kvack.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-12 21:05:34 -04:00
Al Viro
626c3920ae shmem_parse_one(): switch to use of fs_parse()
This thing will eventually become our ->parse_param(), while
shmem_parse_options() - ->parse_monolithic().  At that point
shmem_parse_options() will start calling vfs_parse_fs_string(),
rather than calling shmem_parse_one() directly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-12 21:01:32 -04:00
Al Viro
e04dc423ae shmem_parse_options(): take handling a single option into a helper
mechanical move.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-12 21:00:32 -04:00
Al Viro
f6490b7fbb shmem_parse_options(): don't bother with mpol in separate variable
just use ctx->mpol (note that callers always set ctx->mpol to NULL when
calling that).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-12 21:00:26 -04:00
Al Viro
0b5071dd32 shmem_parse_options(): use a separate structure to keep the results
... and copy the data from it into sbinfo in the callers.
For use by remount we need to keep track whether there'd
been options setting max_inodes, max_blocks and huge resp.
and do the sanity checks (and copying) only if such options
had been seen.  uid/gid/mode is ignored by remount and
NULL mpol is already explicitly treated as "ignore it",
so we don't need to keep track of those.

Note: theoretically, mpol_parse_string() may return NULL
not in case of error (for default policy), so the assumption
that NULL mpol means "change nothing" is incorrect.  However,
that's the mainline behaviour and any changes belong in
a separate patch.  If we go for that, we'll need to keep
track of having encountered mpol= option too.

[changes in remount logics from Hugh Dickins folded]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-12 20:59:14 -04:00
Daniel Vetter
ba170f76b6 mm, notifier: Catch sleeping/blocking for !blockable
We need to make sure implementations don't cheat and don't have a possible
schedule/blocking point deeply burried where review can't catch it.

I'm not sure whether this is the best way to make sure all the
might_sleep() callsites trigger, and it's a bit ugly in the code flow.
But it gets the job done.

Inspired by an i915 patch series which did exactly that, because the rules
haven't been entirely clear to us.

Link: https://lore.kernel.org/r/20190826201425.17547-5-daniel.vetter@ffwll.ch
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Jérôme Glisse <jglisse@redhat.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:05 -03:00
Christoph Hellwig
b4bc7817b2 pagewalk: use lockdep_assert_held for locking validation
Use lockdep to check for held locks instead of using home grown asserts.

Link: https://lore.kernel.org/r/20190828141955.22210-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:04 -03:00
Christoph Hellwig
7b86ac3371 pagewalk: separate function pointers from iterator data
The mm_walk structure currently mixed data and code.  Split out the
operations vectors into a new mm_walk_ops structure, and while we are
changing the API also declare the mm_walk structure inside the
walk_page_range and walk_page_vma functions.

Based on patch from Linus Torvalds.

Link: https://lore.kernel.org/r/20190828141955.22210-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:04 -03:00
Christoph Hellwig
a520110e4a mm: split out a new pagewalk.h header from mm.h
Add a new header for the two handful of users of the walk_page_range /
walk_page_vma interface instead of polluting all users of mm.h with it.

Link: https://lore.kernel.org/r/20190828141955.22210-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:04 -03:00
Daniel Vetter
66204f1d2d mm/mmu_notifiers: prime lockdep
We want to teach lockdep that mmu notifiers can be called from direct
reclaim paths, since on many CI systems load might never reach that
level (e.g. when just running fuzzer or small functional tests).

I've put the annotation into mmu_notifier_register since only when we have
mmu notifiers registered is there any point in teaching lockdep about
them. Also, we already have a kmalloc(, GFP_KERNEL), so this is safe.

Link: https://lore.kernel.org/r/20190826201425.17547-3-daniel.vetter@ffwll.ch
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:28:04 -03:00
Daniel Vetter
23b68395c7 mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
This is a similar idea to the fs_reclaim fake lockdep lock. It's fairly
easy to provoke a specific notifier to be run on a specific range: Just
prep it, and then munmap() it.

A bit harder, but still doable, is to provoke the mmu notifiers for all
the various callchains that might lead to them. But both at the same time
is really hard to reliably hit, especially when you want to exercise paths
like direct reclaim or compaction, where it's not easy to control what
exactly will be unmapped.

By introducing a lockdep map to tie them all together we allow lockdep to
see a lot more dependencies, without having to actually hit them in a
single challchain while testing.

On Jason's suggestion this is is rolled out for both
invalidate_range_start and invalidate_range_end. They both have the same
calling context, hence we can share the same lockdep map. Note that the
annotation for invalidate_ranage_start is outside of the
mm_has_notifiers(), to make sure lockdep is informed about all paths
leading to this context irrespective of whether mmu notifiers are present
for a given context. We don't do that on the invalidate_range_end side to
avoid paying the overhead twice, there the lockdep annotation is pushed
down behind the mm_has_notifiers() check.

Link: https://lore.kernel.org/r/20190826201425.17547-2-daniel.vetter@ffwll.ch
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-07 04:27:42 -03:00
Al Viro
7e30d2a5eb make shmem_fill_super() static
... have callers use shmem_mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-05 14:34:28 -04:00
Gustavo A. R. Silva
14d3761245 percpu: Use struct_size() helper
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct pcpu_alloc_info {
	...
        struct pcpu_group_info  groups[];
};

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

So, replace the following form:

sizeof(*ai) + nr_groups * sizeof(ai->groups[0])

with:

struct_size(ai, groups, nr_groups)

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2019-09-04 13:40:49 -07:00
Nadav Amit
02fa5d7b17 mm/balloon_compaction: suppress allocation warnings
There is no reason to print warnings when balloon page allocation fails,
as they are expected and can be handled gracefully.  Since VMware
balloon now uses balloon-compaction infrastructure, and suppressed these
warnings before, it is also beneficial to suppress these warnings to
keep the same behavior that the balloon had before.

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2019-09-04 07:42:01 -04:00
Christoph Hellwig
fe9041c245 vmalloc: lift the arm flag for coherent mappings to common code
The arm architecture had a VM_ARM_DMA_CONSISTENT flag to mark DMA
coherent remapping for a while.  Lift this flag to common code so
that we can use it generically.  We also check it in the only place
VM_USERMAP is directly check so that we can entirely replace that
flag as well (although I'm not even sure why we'd want to allow
remapping DMA appings, but I'd rather not change behavior).

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04 11:13:19 +02:00
Matt Fleming
a55c7454a8 sched/topology: Improve load balancing on AMD EPYC systems
SD_BALANCE_{FORK,EXEC} and SD_WAKE_AFFINE are stripped in sd_init()
for any sched domains with a NUMA distance greater than 2 hops
(RECLAIM_DISTANCE). The idea being that it's expensive to balance
across domains that far apart.

However, as is rather unfortunately explained in:

  commit 32e45ff43e ("mm: increase RECLAIM_DISTANCE to 30")

the value for RECLAIM_DISTANCE is based on node distance tables from
2011-era hardware.

Current AMD EPYC machines have the following NUMA node distances:

 node distances:
 node   0   1   2   3   4   5   6   7
   0:  10  16  16  16  32  32  32  32
   1:  16  10  16  16  32  32  32  32
   2:  16  16  10  16  32  32  32  32
   3:  16  16  16  10  32  32  32  32
   4:  32  32  32  32  10  16  16  16
   5:  32  32  32  32  16  10  16  16
   6:  32  32  32  32  16  16  10  16
   7:  32  32  32  32  16  16  16  10

where 2 hops is 32.

The result is that the scheduler fails to load balance properly across
NUMA nodes on different sockets -- 2 hops apart.

For example, pinning 16 busy threads to NUMA nodes 0 (CPUs 0-7) and 4
(CPUs 32-39) like so,

  $ numactl -C 0-7,32-39 ./spinner 16

causes all threads to fork and remain on node 0 until the active
balancer kicks in after a few seconds and forcibly moves some threads
to node 4.

Override node_reclaim_distance for AMD Zen.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suravee.Suthikulpanit@amd.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas.Lendacky@amd.com
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190808195301.13222-3-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-03 09:17:37 +02:00
Jan Kara
cf1ea0592d fs: Export generic_fadvise()
Filesystems will need to call this function from their fadvise handlers.

CC: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 22:43:58 -07:00
Jan Kara
692fe62433 mm: Handle MADV_WILLNEED through vfs_fadvise()
Currently handling of MADV_WILLNEED hint calls directly into readahead
code. Handle it by calling vfs_fadvise() instead so that filesystem can
use its ->fadvise() callback to acquire necessary locks or otherwise
prepare for the request.

Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Boaz Harrosh <boazh@netapp.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 22:43:58 -07:00
Shakeel Butt
6c1c280805 mm: memcontrol: fix percpu vmstats and vmevents flush
Instead of using raw_cpu_read() use per_cpu() to read the actual data of
the corresponding cpu otherwise we will be reading the data of the
current cpu for the number of online CPUs.

Link: http://lkml.kernel.org/r/20190829203110.129263-1-shakeelb@google.com
Fixes: bb65f89b7d ("mm: memcontrol: flush percpu vmevents before releasing memcg")
Fixes: c350a99ea2 ("mm: memcontrol: flush percpu vmstats before releasing memcg")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Michal Hocko
d2e5fb927e mm, memcg: do not set reclaim_state on soft limit reclaim
Adric Blake has noticed[1] the following warning:

  WARNING: CPU: 7 PID: 175 at mm/vmscan.c:245 set_task_reclaim_state+0x1e/0x40
  [...]
  Call Trace:
   mem_cgroup_shrink_node+0x9b/0x1d0
   mem_cgroup_soft_limit_reclaim+0x10c/0x3a0
   balance_pgdat+0x276/0x540
   kswapd+0x200/0x3f0
   ? wait_woken+0x80/0x80
   kthread+0xfd/0x130
   ? balance_pgdat+0x540/0x540
   ? kthread_park+0x80/0x80
   ret_from_fork+0x35/0x40
  ---[ end trace 727343df67b2398a ]---

which tells us that soft limit reclaim is about to overwrite the
reclaim_state configured up in the call chain (kswapd in this case but
the direct reclaim is equally possible).  This means that reclaim stats
would get misleading once the soft reclaim returns and another reclaim
is done.

Fix the warning by dropping set_task_reclaim_state from the soft reclaim
which is always called with reclaim_state set up.

[1] http://lkml.kernel.org/r/CAE1jjeePxYPvw1mw2B3v803xHVR_BNnz0hQUY_JDMN8ny29M6w@mail.gmail.com

Link: http://lkml.kernel.org/r/20190828071808.20410-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Adric Blake <promarbler14@gmail.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Gustavo A. R. Silva
14108b9131 mm/z3fold.c: fix lock/unlock imbalance in z3fold_page_isolate
Fix lock/unlock imbalance by unlocking *zhdr* before return.

Addresses Coverity ID 1452811 ("Missing unlock")

Link: http://lkml.kernel.org/r/20190826030634.GA4379@embeddedor
Fixes: d776aaa989 ("mm/z3fold.c: fix race between migration and destruction")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Roman Gushchin
b4c46484dc mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones"
Commit 766a4c19d8 ("mm/memcontrol.c: keep local VM counters in sync
with the hierarchical ones") effectively decreased the precision of
per-memcg vmstats_local and per-memcg-per-node lruvec percpu counters.

That's good for displaying in memory.stat, but brings a serious
regression into the reclaim process.

One issue I've discovered and debugged is the following:
lruvec_lru_size() can return 0 instead of the actual number of pages in
the lru list, preventing the kernel to reclaim last remaining pages.
Result is yet another dying memory cgroups flooding.  The opposite is
also happening: scanning an empty lru list is the waste of cpu time.

Also, inactive_list_is_low() can return incorrect values, preventing the
active lru from being scanned and freed.  It can fail both because the
size of active and inactive lists are inaccurate, and because the number
of workingset refaults isn't precise.  In other words, the result is
pretty random.

I'm not sure, if using the approximate number of slab pages in
count_shadow_number() is acceptable, but issues described above are
enough to partially revert the patch.

Let's keep per-memcg vmstat_local batched (they are only used for
displaying stats to the userspace), but keep lruvec stats precise.  This
change fixes the dead memcg flooding on my setup.

Link: http://lkml.kernel.org/r/20190817004726.2530670-1-guro@fb.com
Fixes: 766a4c19d8 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Andrew Morton
441e254cd4 mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n
Fixes: 701d678599 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Roman Gushchin
bee07b33db mm: memcontrol: flush percpu slab vmstats on kmem offlining
I've noticed that the "slab" value in memory.stat is sometimes 0, even
if some children memory cgroups have a non-zero "slab" value.  The
following investigation showed that this is the result of the kmem_cache
reparenting in combination with the per-cpu batching of slab vmstats.

At the offlining some vmstat value may leave in the percpu cache, not
being propagated upwards by the cgroup hierarchy.  It means that stats
on ancestor levels are lower than actual.  Later when slab pages are
released, the precise number of pages is substracted on the parent
level, making the value negative.  We don't show negative values, 0 is
printed instead.

To fix this issue, let's flush percpu slab memcg and lruvec stats on
memcg offlining.  This guarantees that numbers on all ancestor levels
are accurate and match the actual number of outstanding slab pages.

Link: http://lkml.kernel.org/r/20190819202338.363363-3-guro@fb.com
Fixes: fb2f2b0adb ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30 18:00:50 -07:00
Tejun Heo
3a8e9ac89e writeback: add tracepoints for cgroup foreign writebacks
cgroup foreign inode handling has quite a bit of heuristics and
internal states which sometimes makes it difficult to understand
what's going on.  Add tracepoints to improve visibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-30 07:42:49 -06:00
Christoph Hellwig
f0ade90a8a mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
No modular code uses these, which makes a lot of sense given the wrappers
around them are only called by core mm code.

Link: https://lore.kernel.org/r/20190828142109.29012-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28 11:52:35 -03:00
Ralph Campbell
c18ce674d5 mm/hmm: hmm_range_fault() infinite loop
Normally, callers to handle_mm_fault() are supposed to check the
vma->vm_flags first. hmm_range_fault() checks for VM_READ but doesn't
check for VM_WRITE if the caller requests a page to be faulted in with
write permission (via the hmm_range.pfns[] value).  If the vma is write
protected, this can result in an infinite loop:

  hmm_range_fault()
    walk_page_range()
      ...
      hmm_vma_walk_hole()
        hmm_vma_walk_hole_()
          hmm_vma_do_fault()
            handle_mm_fault(FAULT_FLAG_WRITE)
            /* returns VM_FAULT_WRITE */
          /* returns -EBUSY */
        /* returns -EBUSY */
      /* returns -EBUSY */
    /* loops on -EBUSY and range->valid */

Prevent this by checking for vma->vm_flags & VM_WRITE before calling
handle_mm_fault().

Link: https://lore.kernel.org/r/20190823221753.2514-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-27 19:27:07 -03:00
Ralph Campbell
6c64f2bbe7 mm/hmm: hmm_range_fault() NULL pointer bug
Although hmm_range_fault() calls find_vma() to make sure that a vma exists
before calling walk_page_range(), hmm_vma_walk_hole() can still be called
with walk->vma == NULL if the start and end address are not contained
within the vma range.

 hmm_range_fault() /* calls find_vma() but no range check */
  walk_page_range() /* calls find_vma(), sets walk->vma = NULL */
   __walk_page_range()
    walk_pgd_range()
     walk_p4d_range()
      walk_pud_range()
       hmm_vma_walk_hole()
        hmm_vma_walk_hole_()
         hmm_vma_do_fault()
          handle_mm_fault(vma=0)

Link: https://lore.kernel.org/r/20190823221753.2514-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-27 19:27:07 -03:00
Tejun Heo
97b27821b4 writeback, memcg: Implement foreign dirty flushing
There's an inherent mismatch between memcg and writeback.  The former
trackes ownership per-page while the latter per-inode.  This was a
deliberate design decision because honoring per-page ownership in the
writeback path is complicated, may lead to higher CPU and IO overheads
and deemed unnecessary given that write-sharing an inode across
different cgroups isn't a common use-case.

Combined with inode majority-writer ownership switching, this works
well enough in most cases but there are some pathological cases.  For
example, let's say there are two cgroups A and B which keep writing to
different but confined parts of the same inode.  B owns the inode and
A's memory is limited far below B's.  A's dirty ratio can rise enough
to trigger balance_dirty_pages() sleeps but B's can be low enough to
avoid triggering background writeback.  A will be slowed down without
a way to make writeback of the dirty pages happen.

This patch implements foreign dirty recording and foreign mechanism so
that when a memcg encounters a condition as above it can trigger
flushes on bdi_writebacks which can clean its pages.  Please see the
comment on top of mem_cgroup_track_foreign_dirty_slowpath() for
details.

A reproducer follows.

write-range.c::

  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <fcntl.h>
  #include <sys/types.h>

  static const char *usage = "write-range FILE START SIZE\n";

  int main(int argc, char **argv)
  {
	  int fd;
	  unsigned long start, size, end, pos;
	  char *endp;
	  char buf[4096];

	  if (argc < 4) {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  fd = open(argv[1], O_WRONLY);
	  if (fd < 0) {
		  perror("open");
		  return 1;
	  }

	  start = strtoul(argv[2], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  size = strtoul(argv[3], &endp, 0);
	  if (*endp != '\0') {
		  fprintf(stderr, usage);
		  return 1;
	  }

	  end = start + size;

	  while (1) {
		  for (pos = start; pos < end; ) {
			  long bread, bwritten = 0;

			  if (lseek(fd, pos, SEEK_SET) < 0) {
				  perror("lseek");
				  return 1;
			  }

			  bread = read(0, buf, sizeof(buf) < end - pos ?
					       sizeof(buf) : end - pos);
			  if (bread < 0) {
				  perror("read");
				  return 1;
			  }
			  if (bread == 0)
				  return 0;

			  while (bwritten < bread) {
				  long this;

				  this = write(fd, buf + bwritten,
					       bread - bwritten);
				  if (this < 0) {
					  perror("write");
					  return 1;
				  }

				  bwritten += this;
				  pos += bwritten;
			  }
		  }
	  }
  }

repro.sh::

  #!/bin/bash

  set -e
  set -x

  sysctl -w vm.dirty_expire_centisecs=300000
  sysctl -w vm.dirty_writeback_centisecs=300000
  sysctl -w vm.dirtytime_expire_seconds=300000
  echo 3 > /proc/sys/vm/drop_caches

  TEST=/sys/fs/cgroup/test
  A=$TEST/A
  B=$TEST/B

  mkdir -p $A $B
  echo "+memory +io" > $TEST/cgroup.subtree_control
  echo $((1<<30)) > $A/memory.high
  echo $((32<<30)) > $B/memory.high

  rm -f testfile
  touch testfile
  fallocate -l 4G testfile

  echo "Starting B"

  (echo $BASHPID > $B/cgroup.procs
   pv -q --rate-limit 70M < /dev/urandom | ./write-range testfile $((2<<30)) $((2<<30))) &

  echo "Waiting 10s to ensure B claims the testfile inode"
  sleep 5
  sync
  sleep 5
  sync
  echo "Starting A"

  (echo $BASHPID > $A/cgroup.procs
   pv < /dev/urandom | ./write-range testfile 0 $((2<<30)))

v2: Added comments explaining why the specific intervals are being used.

v3: Use 0 @nr when calling cgroup_writeback_by_id() to use best-effort
    flushing while avoding possible livelocks.

v4: Use get_jiffies_64() and time_before/after64() instead of raw
    jiffies_64 and arthimetic comparisons as suggested by Jan.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 09:22:38 -06:00
Tejun Heo
ed288dc0d4 writeback: Separate out wb_get_lookup() from wb_get_create()
Separate out wb_get_lookup() which doesn't try to create one if there
isn't already one from wb_get_create().  This will be used by later
patches.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 09:22:38 -06:00
Tejun Heo
34f8fe501f bdi: Add bdi->id
There currently is no way to universally identify and lookup a bdi
without holding a reference and pointer to it.  This patch adds an
non-recycling bdi->id and implements bdi_get_by_id() which looks up
bdis by their ids.  This will be used by memcg foreign inode flushing.

I left bdi_list alone for simplicity and because while rb_tree does
support rcu assignment it doesn't seem to guarantee lossless walk when
walk is racing aginst tree rebalance operations.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 09:22:38 -06:00
Andrey Ryabinin
00fb24a42a mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
The code like this:

	ptr = kmalloc(size, GFP_KERNEL);
	page = virt_to_page(ptr);
	offset = offset_in_page(ptr);
	kfree(page_address(page) + offset);

may produce false-positive invalid-free reports on the kernel with
CONFIG_KASAN_SW_TAGS=y.

In the example above we lose the original tag assigned to 'ptr', so
kfree() gets the pointer with 0xFF tag.  In kfree() we check that 0xFF
tag is different from the tag in shadow hence print false report.

Instead of just comparing tags, do the following:

1) Check that shadow doesn't contain KASAN_TAG_INVALID.  Otherwise it's
   double-free and it doesn't matter what tag the pointer have.

2) If pointer tag is different from 0xFF, make sure that tag in the
   shadow is the same as in the pointer.

Link: http://lkml.kernel.org/r/20190819172540.19581-1-aryabinin@virtuozzo.com
Fixes: 7f94ffbc4c ("kasan: add hooks implementation for tag-based mode")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Henry Burns
701d678599 mm/zsmalloc.c: fix race condition in zs_destroy_pool
In zs_destroy_pool() we call flush_work(&pool->free_work).  However, we
have no guarantee that migration isn't happening in the background at
that time.

Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages.  But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work().  Which would mean
pages still pointing at the inode when we free it.

Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages).  This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding.  Keeping that state under the class spinlock
keeps the logic straightforward.

In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page.  This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).

Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com
Fixes: 48b4800a1c ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Henry Burns
1a87aa0359 mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage.  However, the return value is
ignored.  If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.

To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.

To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.

Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com
Fixes: 48b4800a1c ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Vlastimil Babka
f7da677bc6 mm, page_owner: handle THP splits correctly
THP splitting path is missing the split_page_owner() call that
split_page() has.

As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages.  Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all.  This patch fixes that by adding the split_page_owner() call into
__split_huge_page().

Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz
Fixes: a9627bc5e3 ("mm/page_owner: introduce split_page_owner and replace manual handling")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Roman Gushchin
bb65f89b7d mm: memcontrol: flush percpu vmevents before releasing memcg
Similar to vmstats, percpu caching of local vmevents leads to an
accumulation of errors on non-leaf levels.  This happens because some
leftovers may remain in percpu caches, so that they are never propagated
up by the cgroup tree and just disappear into nonexistence with on
releasing of the memory cgroup.

To fix this issue let's accumulate and propagate percpu vmevents values
before releasing the memory cgroup similar to what we're doing with
vmstats.

Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.

Link: http://lkml.kernel.org/r/20190819202338.363363-4-guro@fb.com
Fixes: 42a3003535 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Roman Gushchin
c350a99ea2 mm: memcontrol: flush percpu vmstats before releasing memcg
Percpu caching of local vmstats with the conditional propagation by the
cgroup tree leads to an accumulation of errors on non-leaf levels.

Let's imagine two nested memory cgroups A and A/B.  Say, a process
belonging to A/B allocates 100 pagecache pages on the CPU 0.  The percpu
cache will spill 3 times, so that 32*3=96 pages will be accounted to A/B
and A atomic vmstat counters, 4 pages will remain in the percpu cache.

Imagine A/B is nearby memory.max, so that every following allocation
triggers a direct reclaim on the local CPU.  Say, each such attempt will
free 16 pages on a new cpu.  That means every percpu cache will have -16
pages, except the first one, which will have 4 - 16 = -12.  A/B and A
atomic counters will not be touched at all.

Now a user removes A/B.  All percpu caches are freed and corresponding
vmstat numbers are forgotten.  A has 96 pages more than expected.

As memory cgroups are created and destroyed, errors do accumulate.  Even
1-2 pages differences can accumulate into large numbers.

To fix this issue let's accumulate and propagate percpu vmstat values
before releasing the memory cgroup.  At this point these numbers are
stable and cannot be changed.

Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.

Link: http://lkml.kernel.org/r/20190819202338.363363-2-guro@fb.com
Fixes: 42a3003535 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
David Rientjes
cd96103838 mm, page_alloc: move_freepages should not examine struct page of reserved memory
After commit 907ec5fca3 ("mm: zero remaining unavailable struct
pages"), struct page of reserved memory is zeroed.  This causes
page->flags to be 0 and fixes issues related to reading
/proc/kpageflags, for example, of reserved memory.

The VM_BUG_ON() in move_freepages_block(), however, assumes that
page_zone() is meaningful even for reserved memory.  That assumption is
no longer true after the aforementioned commit.

There's no reason why move_freepages_block() should be testing the
legitimacy of page_zone() for reserved memory; its scope is limited only
to pages on the zone's freelist.

Note that pfn_valid() can be true for reserved memory: there is a
backing struct page.  The check for page_to_nid(page) is also buggy but
reserved memory normally only appears on node 0 so the zeroing doesn't
affect this.

Move the debug checks to after verifying PageBuddy is true.  This
isolates the scope of the checks to only be for buddy pages which are on
the zone's freelist which move_freepages_block() is operating on.  In
this case, an incorrect node or zone is a bug worthy of being warned
about (and the examination of struct page is acceptable bcause this
memory is not reserved).

Why does move_freepages_block() gets called on reserved memory? It's
simply math after finding a valid free page from the per-zone free area
to use as fallback.  We find the beginning and end of the pageblock of
the valid page and that can bring us into memory that was reserved per
the e820.  pfn_valid() is still true (it's backed by a struct page), but
since it's zero'd we shouldn't make any inferences here about comparing
its node or zone.  The current node check just happens to succeed most
of the time by luck because reserved memory typically appears on node 0.

The fix here is to validate that we actually have buddy pages before
testing if there's any type of zone or node strangeness going on.

We noticed it almost immediately after bringing 907ec5fca3 in on
CONFIG_DEBUG_VM builds.  It depends on finding specific free pages in
the per-zone free area where the math in move_freepages() will bring the
start or end pfn into reserved memory and wanting to claim that entire
pageblock as a new migratetype.  So the path will be rare, require
CONFIG_DEBUG_VM, and require fallback to a different migratetype.

Some struct pages were already zeroed from reserve pages before
907ec5fca3c so it theoretically could trigger before this commit.  I
think it's rare enough under a config option that most people don't run
that others may not have noticed.  I wouldn't argue against a stable tag
and the backport should be easy enough, but probably wouldn't single out
a commit that this is fixing.

Mel said:

: The overhead of the debugging check is higher with this patch although
: it'll only affect debug builds and the path is not particularly hot.
: If this was a concern, I think it would be reasonable to simply remove
: the debugging check as the zone boundaries are checked in
: move_freepages_block and we never expect a zone/node to be smaller than
: a pageblock and stuck in the middle of another zone.

Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908122036560.10779@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Henry Burns
d776aaa989 mm/z3fold.c: fix race between migration and destruction
In z3fold_destroy_pool() we call destroy_workqueue(&pool->compact_wq).
However, we have no guarantee that migration isn't happening in the
background at that time.

Migration directly calls queue_work_on(pool->compact_wq), if destruction
wins that race we are using a destroyed workqueue.

Link: http://lkml.kernel.org/r/20190809213828.202833-1-henryburns@google.com
Signed-off-by: Henry Burns <henryburns@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-24 19:48:42 -07:00
Yang, Philip
e3fe8e555d mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
hmm_range_fault() may return NULL pages because some of the pfns are equal
to HMM_PFN_NONE. This happens randomly under memory pressure. The reason
is during the swapped out page pte path, hmm_vma_handle_pte() doesn't
update the fault variable from cpu_flags, so it failed to call
hmm_vam_do_fault() to swap the page in.

The fix is to call hmm_pte_need_fault() to update fault variable.

Fixes: 74eee180b9 ("mm/hmm/mirror: device page fault handler")
Link: https://lore.kernel.org/r/20190815205227.7949-1-Philip.Yang@amd.com
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-23 10:22:20 -03:00
Jason Gunthorpe
c96245148c mm/mmu_notifiers: remove unregister_no_release
mmu_notifier_unregister_no_release() and mmu_notifier_call_srcu() no
longer have any users, they have all been converted to use
mmu_notifier_put().

So delete this difficult to use interface.

Link: https://lore.kernel.org/r/20190806231548.25242-12-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 20:58:19 -03:00
Jason Gunthorpe
daa138a58c Merge branch 'odp_fixes' into hmm.git
From rdma.git

Jason Gunthorpe says:

====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================

The branch is based on v5.3-rc5 due to dependencies, and is being taken
into hmm.git due to dependencies in the next patches.

* odp_fixes:
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  RDMA/core: Make invalidate_range a device operation
  RDMA/odp: Use kvcalloc for the dma_list and page_list
  RDMA/odp: Check for overflow when computing the umem_odp end
  RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
  RDMA/odp: Split creating a umem_odp from ib_umem_get
  RDMA/odp: Make the three ways to create a umem_odp clear
  RMDA/odp: Consolidate umem_odp initialization
  RDMA/odp: Make it clearer when a umem is an implicit ODP umem
  RDMA/odp: Iterate over the whole rbtree directly
  RDMA/odp: Use the common interval tree library instead of generic
  RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 20:58:18 -03:00
Darrick J. Wong
dc617f29db vfs: don't allow writes to swap files
Don't let userspace write to an active swap file because the kernel
effectively has a long term lease on the storage and things could get
seriously corrupted if we let this happen.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-20 07:55:16 -07:00
Darrick J. Wong
1638045c36 mm: set S_SWAPFILE on blockdev swap devices
Set S_SWAPFILE on block device inodes so that they have the same
protections as a swap flie.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-20 07:55:16 -07:00
Christoph Hellwig
fdc029b19d memremap: remove the dev field in struct dev_pagemap
The dev field in struct dev_pagemap is only used to print dev_name in two
places, which are at best nice to have.  Just remove the field and thus
the name in those two messages.

Link: https://lore.kernel.org/r/20190818090557.17853-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:41:35 -03:00
Daniel Vetter
8402ce61be mm/mmu_notifiers: check if mmu notifier callbacks are allowed to fail
Just a bit of paranoia, since if we start pushing this deep into
callchains it's hard to spot all places where an mmu notifier
implementation might fail when it's not allowed to.

Inspired by some confusion we had discussing i915 mmu notifiers and
whether we could use the newly-introduced return value to handle some
corner cases. Until we realized that these are only for when a task has
been killed by the oom reaper.

An alternative approach would be to split the callback into two versions,
one with the int return value, and the other with void return value like
in older kernels. But that's a lot more churn for fairly little gain I
think.

Summary from the m-l discussion on why we want something at warning level:
This allows automated tooling in CI to catch bugs without humans having to
look at everything. If we just upgrade the existing pr_info to a pr_warn,
then we'll have false positives. And as-is, no one will ever spot the
problem since it's lost in the massive amounts of overall dmesg noise.

Link: https://lore.kernel.org/r/20190814202027.18735-2-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:35:03 -03:00
Christoph Hellwig
9b2ed9cb97 mm: remove CONFIG_MIGRATE_VMA_HELPER
CONFIG_MIGRATE_VMA_HELPER guards helpers that are required for proper
devic private memory support.  Remove the option and just check for
CONFIG_DEVICE_PRIVATE instead.

Link: https://lore.kernel.org/r/20190814075928.23766-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:35:03 -03:00
Christoph Hellwig
06d462beb4 mm: remove the unused MIGRATE_PFN_DEVICE flag
No one ever checks this flag, and we could easily get that information
from the page if needed.

Link: https://lore.kernel.org/r/20190814075928.23766-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:35:03 -03:00
Christoph Hellwig
a7d1f22bb7 mm: turn migrate_vma upside down
There isn't any good reason to pass callbacks to migrate_vma.  Instead
we can just export the three steps done by this function to drivers and
let them sequence the operation without callbacks.  This removes a lot
of boilerplate code as-is, and will allow the drivers to drastically
improve code flow and error handling further on.

Link: https://lore.kernel.org/r/20190814075928.23766-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:35:02 -03:00
Jason Gunthorpe
c7d8b7824f hmm: use mmu_notifier_get/put for 'struct hmm'
This is a significant simplification, it eliminates all the remaining
'hmm' stuff in mm_struct, eliminates krefing along the critical notifier
paths, and takes away all the ugly locking and abuse of page_table_lock.

mmu_notifier_get() provides the single struct hmm per struct mm which
eliminates mm->hmm.

It also directly guarantees that no mmu_notifier op callback is callable
while concurrent free is possible, this eliminates all the krefs inside
the mmu_notifier callbacks.

The remaining krefs in the range code were overly cautious, drivers are
already not permitted to free the mirror while a range exists.

Link: https://lore.kernel.org/r/20190806231548.25242-6-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-20 09:35:02 -03:00
Jason Gunthorpe
2c7933f53f mm/mmu_notifiers: add a get/put scheme for the registration
Many places in the kernel have a flow where userspace will create some
object and that object will need to connect to the subsystem's
mmu_notifier subscription for the duration of its lifetime.

In this case the subsystem is usually tracking multiple mm_structs and it
is difficult to keep track of what struct mmu_notifier's have been
allocated for what mm's.

Since this has been open coded in a variety of exciting ways, provide core
functionality to do this safely.

This approach uses the struct mmu_notifier_ops * as a key to determine if
the subsystem has a notifier registered on the mm or not. If there is a
registration then the existing notifier struct is returned, otherwise the
ops->alloc_notifiers() is used to create a new per-subsystem notifier for
the mm.

The destroy side incorporates an async call_srcu based destruction which
will avoid bugs in the callers such as commit 6d7c3cde93 ("mm/hmm: fix
use after free with struct hmm in the mmu notifiers").

Since we are inside the mmu notifier core locking is fairly simple, the
allocation uses the same approach as for mmu_notifier_mm, the write side
of the mmap_sem makes everything deterministic and we only need to do
hlist_add_head_rcu() under the mm_take_all_locks(). The new users count
and the discoverability in the hlist is fully serialized by the
mmu_notifier_mm->lock.

Link: https://lore.kernel.org/r/20190806231548.25242-4-jgg@ziepe.ca
Co-developed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-16 12:02:52 -03:00
Jason Gunthorpe
70df291bf8 mm/mmu_notifiers: do not speculatively allocate a mmu_notifier_mm
A prior commit e0f3c3f78d ("mm/mmu_notifier: init notifier if necessary")
made an attempt at doing this, but had to be reverted as calling
the GFP_KERNEL allocator under the i_mmap_mutex causes deadlock, see
commit 35cfa2b0b4 ("mm/mmu_notifier: allocate mmu_notifier in advance").

However, we can avoid that problem by doing the allocation only under
the mmap_sem, which is already happening.

Since all writers to mm->mmu_notifier_mm hold the write side of the
mmap_sem reading it under that sem is deterministic and we can use that to
decide if the allocation path is required, without speculation.

The actual update to mmu_notifier_mm must still be done under the
mm_take_all_locks() to ensure read-side coherency.

Link: https://lore.kernel.org/r/20190806231548.25242-3-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-16 11:44:48 -03:00
Jason Gunthorpe
56c57103db mm/mmu_notifiers: hoist do_mmu_notifier_register down_write to the caller
This simplifies the code to not have so many one line functions and extra
logic. __mmu_notifier_register() simply becomes the entry point to
register the notifier, and the other one calls it under lock.

Also add a lockdep_assert to check that the callers are holding the lock
as expected.

Link: https://lore.kernel.org/r/20190806231548.25242-2-jgg@ziepe.ca
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-16 11:44:48 -03:00
Mike Kravetz
4643d67e8c hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
Li Wang discovered that LTP/move_page12 V2 sometimes triggers SIGBUS in
the kernel-v5.2.3 testing.  This is caused by a race between hugetlb
page migration and page fault.

If a hugetlb page can not be allocated to satisfy a page fault, the task
is sent SIGBUS.  This is normal hugetlbfs behavior.  A hugetlb fault
mutex exists to prevent two tasks from trying to instantiate the same
page.  This protects against the situation where there is only one
hugetlb page, and both tasks would try to allocate.  Without the mutex,
one would fail and SIGBUS even though the other fault would be
successful.

There is a similar race between hugetlb page migration and fault.
Migration code will allocate a page for the target of the migration.  It
will then unmap the original page from all page tables.  It does this
unmap by first clearing the pte and then writing a migration entry.  The
page table lock is held for the duration of this clear and write
operation.  However, the beginnings of the hugetlb page fault code
optimistically checks the pte without taking the page table lock.  If
clear (as it can be during the migration unmap operation), a hugetlb
page allocation is attempted to satisfy the fault.  Note that the page
which will eventually satisfy this fault was already allocated by the
migration code.  However, the allocation within the fault path could
fail which would result in the task incorrectly being sent SIGBUS.

Ideally, we could take the hugetlb fault mutex in the migration code
when modifying the page tables.  However, locks must be taken in the
order of hugetlb fault mutex, page lock, page table lock.  This would
require significant rework of the migration code.  Instead, the issue is
addressed in the hugetlb fault code.  After failing to allocate a huge
page, take the page table lock and check for huge_pte_none before
returning an error.  This is the same check that must be made further in
the code even if page allocation is successful.

Link: http://lkml.kernel.org/r/20190808000533.7701-1-mike.kravetz@oracle.com
Fixes: 290408d4a2 ("hugetlb: hugepage migration core")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:53 -07:00
Mel Gorman
28360f3987 mm, vmscan: do not special-case slab reclaim when watermarks are boosted
Dave Chinner reported a problem pointing a finger at commit 1c30844d2d
("mm: reclaim small amounts of memory when an external fragmentation
event occurs").

The report is extensive:

  https://lore.kernel.org/linux-mm/20190807091858.2857-1-david@fromorbit.com/

and it's worth recording the most relevant parts (colorful language and
typos included).

	When running a simple, steady state 4kB file creation test to
	simulate extracting tarballs larger than memory full of small
	files into the filesystem, I noticed that once memory fills up
	the cache balance goes to hell.

	The workload is creating one dirty cached inode for every dirty
	page, both of which should require a single IO each to clean and
	reclaim, and creation of inodes is throttled by the rate at which
	dirty writeback runs at (via balance dirty pages). Hence the ingest
	rate of new cached inodes and page cache pages is identical and
	steady. As a result, memory reclaim should quickly find a steady
	balance between page cache and inode caches.

	The moment memory fills, the page cache is reclaimed at a much
	faster rate than the inode cache, and evidence suggests that
	the inode cache shrinker is not being called when large batches
	of pages are being reclaimed. In roughly the same time period
	that it takes to fill memory with 50% pages and 50% slab caches,
	memory reclaim reduces the page cache down to just dirty pages
	and slab caches fill the entirety of memory.

	The LRU is largely full of dirty pages, and we're getting spikes
	of random writeback from memory reclaim so it's all going to shit.
	Behaviour never recovers, the page cache remains pinned at just
	dirty pages, and nothing I could tune would make any difference.
	vfs_cache_pressure makes no difference - I would set it so high
	it should trim the entire inode caches in a single pass, yet it
	didn't do anything. It was clear from tracing and live telemetry
	that the shrinkers were pretty much not running except when
	there was absolutely no memory free at all, and then they did
	the minimum necessary to free memory to make progress.

	So I went looking at the code, trying to find places where pages
	got reclaimed and the shrinkers weren't called. There's only one
	- kswapd doing boosted reclaim as per commit 1c30844d2d ("mm:
	reclaim small amounts of memory when an external fragmentation
	event occurs").

The watermark boosting introduced by the commit is triggered in response
to an allocation "fragmentation event".  The boosting was not intended
to target THP specifically and triggers even if THP is disabled.
However, with Dave's perfectly reasonable workload, fragmentation events
can be very common given the ratio of slab to page cache allocations so
boosting remains active for long periods of time.

As high-order allocations might use compaction and compaction cannot
move slab pages the decision was made in the commit to special-case
kswapd when watermarks are boosted -- kswapd avoids reclaiming slab as
reclaiming slab does not directly help compaction.

As Dave notes, this decision means that slab can be artificially
protected for long periods of time and messes up the balance with slab
and page caches.

Removing the special casing can still indirectly help avoid
fragmentation by avoiding fragmentation-causing events due to slab
allocation as pages from a slab pageblock will have some slab objects
freed.  Furthermore, with the special casing, reclaim behaviour is
unpredictable as kswapd sometimes examines slab and sometimes does not
in a manner that is tricky to tune or analyse.

This patch removes the special casing.  The downside is that this is not
a universal performance win.  Some benchmarks that depend on the
residency of data when rereading metadata may see a regression when slab
reclaim is restored to its original behaviour.  Similarly, some
benchmarks that only read-once or write-once may perform better when
page reclaim is too aggressive.  The primary upside is that slab
shrinker is less surprising (arguably more sane but that's a matter of
opinion), behaves consistently regardless of the fragmentation state of
the system and properly obeys VM sysctls.

A fsmark benchmark configuration was constructed similar to what Dave
reported and is codified by the mmtest configuration
config-io-fsmark-small-file-stream.  It was evaluated on a 1-socket
machine to avoid dealing with NUMA-related issues and the timing of
reclaim.  The storage was an SSD Samsung Evo and a fresh trimmed XFS
filesystem was used for the test data.

This is not an exact replication of Dave's setup.  The configuration
scales its parameters depending on the memory size of the SUT to behave
similarly across machines.  The parameters mean the first sample
reported by fs_mark is using 50% of RAM which will barely be throttled
and look like a big outlier.  Dave used fake NUMA to have multiple
kswapd instances which I didn't replicate.  Finally, the number of
iterations differ from Dave's test as the target disk was not large
enough.  While not identical, it should be representative.

  fsmark
                                     5.3.0-rc3              5.3.0-rc3
                                       vanilla          shrinker-v1r1
  Min       1-files/sec     4444.80 (   0.00%)     4765.60 (   7.22%)
  1st-qrtle 1-files/sec     5005.10 (   0.00%)     5091.70 (   1.73%)
  2nd-qrtle 1-files/sec     4917.80 (   0.00%)     4855.60 (  -1.26%)
  3rd-qrtle 1-files/sec     4667.40 (   0.00%)     4831.20 (   3.51%)
  Max-1     1-files/sec    11421.50 (   0.00%)     9999.30 ( -12.45%)
  Max-5     1-files/sec    11421.50 (   0.00%)     9999.30 ( -12.45%)
  Max-10    1-files/sec    11421.50 (   0.00%)     9999.30 ( -12.45%)
  Max-90    1-files/sec     4649.60 (   0.00%)     4780.70 (   2.82%)
  Max-95    1-files/sec     4491.00 (   0.00%)     4768.20 (   6.17%)
  Max-99    1-files/sec     4491.00 (   0.00%)     4768.20 (   6.17%)
  Max       1-files/sec    11421.50 (   0.00%)     9999.30 ( -12.45%)
  Hmean     1-files/sec     5004.75 (   0.00%)     5075.96 (   1.42%)
  Stddev    1-files/sec     1778.70 (   0.00%)     1369.66 (  23.00%)
  CoeffVar  1-files/sec       33.70 (   0.00%)       26.05 (  22.71%)
  BHmean-99 1-files/sec     5053.72 (   0.00%)     5101.52 (   0.95%)
  BHmean-95 1-files/sec     5053.72 (   0.00%)     5101.52 (   0.95%)
  BHmean-90 1-files/sec     5107.05 (   0.00%)     5131.41 (   0.48%)
  BHmean-75 1-files/sec     5208.45 (   0.00%)     5206.68 (  -0.03%)
  BHmean-50 1-files/sec     5405.53 (   0.00%)     5381.62 (  -0.44%)
  BHmean-25 1-files/sec     6179.75 (   0.00%)     6095.14 (  -1.37%)

                     5.3.0-rc3   5.3.0-rc3
                       vanillashrinker-v1r1
  Duration User         501.82      497.29
  Duration System      4401.44     4424.08
  Duration Elapsed     8124.76     8358.05

This is showing a slight skew for the max result representing a large
outlier for the 1st, 2nd and 3rd quartile are similar indicating that
the bulk of the results show little difference.  Note that an earlier
version of the fsmark configuration showed a regression but that
included more samples taken while memory was still filling.

Note that the elapsed time is higher.  Part of this is that the
configuration included time to delete all the test files when the test
completes -- the test automation handles the possibility of testing
fsmark with multiple thread counts.  Without the patch, many of these
objects would be memory resident which is part of what the patch is
addressing.

There are other important observations that justify the patch.

1. With the vanilla kernel, the number of dirty pages in the system is
   very low for much of the test. With this patch, dirty pages is
   generally kept at 10% which matches vm.dirty_background_ratio which
   is normal expected historical behaviour.

2. With the vanilla kernel, the ratio of Slab/Pagecache is close to
   0.95 for much of the test i.e. Slab is being left alone and
   dominating memory consumption. With the patch applied, the ratio
   varies between 0.35 and 0.45 with the bulk of the measured ratios
   roughly half way between those values. This is a different balance to
   what Dave reported but it was at least consistent.

3. Slabs are scanned throughout the entire test with the patch applied.
   The vanille kernel has periods with no scan activity and then
   relatively massive spikes.

4. Without the patch, kswapd scan rates are very variable. With the
   patch, the scan rates remain quite steady.

4. Overall vmstats are closer to normal expectations

	                                5.3.0-rc3      5.3.0-rc3
	                                  vanilla  shrinker-v1r1
    Ops Direct pages scanned             99388.00      328410.00
    Ops Kswapd pages scanned          45382917.00    33451026.00
    Ops Kswapd pages reclaimed        30869570.00    25239655.00
    Ops Direct pages reclaimed           74131.00        5830.00
    Ops Kswapd efficiency %                 68.02          75.45
    Ops Kswapd velocity                   5585.75        4002.25
    Ops Page reclaim immediate         1179721.00      430927.00
    Ops Slabs scanned                 62367361.00    73581394.00
    Ops Direct inode steals               2103.00        1002.00
    Ops Kswapd inode steals             570180.00     5183206.00

	o Vanilla kernel is hitting direct reclaim more frequently,
	  not very much in absolute terms but the fact the patch
	  reduces it is interesting
	o "Page reclaim immediate" in the vanilla kernel indicates
	  dirty pages are being encountered at the tail of the LRU.
	  This is generally bad and means in this case that the LRU
	  is not long enough for dirty pages to be cleaned by the
	  background flush in time. This is much reduced by the
	  patch.
	o With the patch, kswapd is reclaiming 10 times more slab
	  pages than with the vanilla kernel. This is indicative
	  of the watermark boosting over-protecting slab

A more complete set of tests were run that were part of the basis for
introducing boosting and while there are some differences, they are well
within tolerances.

Bottom line, the special casing kswapd to avoid slab behaviour is
unpredictable and can lead to abnormal results for normal workloads.

This patch restores the expected behaviour that slab and page cache is
balanced consistently for a workload with a steady allocation ratio of
slab/pagecache pages.  It also means that if there are workloads that
favour the preservation of slab over pagecache that it can be tuned via
vm.vfs_cache_pressure where as the vanilla kernel effectively ignores
the parameter when boosting is active.

Link: http://lkml.kernel.org/r/20190808182946.GM2739@techsingularity.net
Fixes: 1c30844d2d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>	[5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:53 -07:00
Andrea Arcangeli
a8282608c8 Revert "mm, thp: restore node-local hugepage allocations"
This reverts commit 2f0799a0ff ("mm, thp: restore node-local
hugepage allocations").

commit 2f0799a0ff was rightfully applied to avoid the risk of a
severe regression that was reported by the kernel test robot at the end
of the merge window.  Now we understood the regression was a false
positive and was caused by a significant increase in fairness during a
swap trashing benchmark.  So it's safe to re-apply the fix and continue
improving the code from there.  The benchmark that reported the
regression is very useful, but it provides a meaningful result only when
there is no significant alteration in fairness during the workload.  The
removal of __GFP_THISNODE increased fairness.

__GFP_THISNODE cannot be used in the generic page faults path for new
memory allocations under the MPOL_DEFAULT mempolicy, or the allocation
behavior significantly deviates from what the MPOL_DEFAULT semantics are
supposed to be for THP and 4k allocations alike.

Setting THP defrag to "always" or using MADV_HUGEPAGE (with THP defrag
set to "madvise") has never meant to provide an implicit MPOL_BIND on
the "current" node the task is running on, causing swap storms and
providing a much more aggressive behavior than even zone_reclaim_node =
3.

Any workload who could have benefited from __GFP_THISNODE has now to
enable zone_reclaim_mode=1||2||3.  __GFP_THISNODE implicitly provided
the zone_reclaim_mode behavior, but it only did so if THP was enabled:
if THP was disabled, there would have been no chance to get any 4k page
from the current node if the current node was full of pagecache, which
further shows how this __GFP_THISNODE was misplaced in MADV_HUGEPAGE.
MADV_HUGEPAGE has never been intended to provide any zone_reclaim_mode
semantics, in fact the two are orthogonal, zone_reclaim_mode = 1|2|3
must work exactly the same with MADV_HUGEPAGE set or not.

The performance characteristic of memory depends on the hardware
details.  The numbers below are obtained on Naples/EPYC architecture and
the N/A projection extends them to show what we should aim for in the
future as a good THP NUMA locality default.  The benchmark used
exercises random memory seeks (note: the cost of the page faults is not
part of the measurement).

  D0 THP | D0 4k | D1 THP | D1 4k | D2 THP | D2 4k | D3 THP | D3 4k | ...
  0%     | +43%  | +45%   | +106% | +131%  | +224% | N/A    | N/A

D0 means distance zero (i.e.  local memory), D1 means distance one (i.e.
intra socket memory), D2 means distance two (i.e.  inter socket memory),
etc...

For the guest physical memory allocated by qemu and for guest mode
kernel the performance characteristic of RAM is more complex and an
ideal default could be:

  D0 THP | D1 THP | D0 4k | D2 THP | D1 4k | D3 THP | D2 4k | D3 4k | ...
  0%     | +58%   | +101% | N/A    | +222% | N/A    | N/A   | N/A

NOTE: the N/A are projections and haven't been measured yet, the
measurement in this case is done on a 1950x with only two NUMA nodes.
The THP case here means THP was used both in the host and in the guest.

After applying this commit the THP NUMA locality order that we'll get
out of MADV_HUGEPAGE is this:

  D0 THP | D1 THP | D2 THP | D3 THP | ... | D0 4k | D1 4k | D2 4k | D3 4k | ...

Before this commit it was:

  D0 THP | D0 4k | D1 4k | D2 4k | D3 4k | ...

Even if we ignore the breakage of large workloads that can't fit in a
single node that the __GFP_THISNODE implicit "current node" mbind
caused, the THP NUMA locality order provided by __GFP_THISNODE was still
not the one we shall aim for in the long term (i.e.  the first one at
the top).

After this commit is applied, we can introduce a new allocator multi
order API and to replace those two alloc_pages_vmas calls in the page
fault path, with a single multi order call:

        unsigned int order = (1 << HPAGE_PMD_ORDER) | (1 << 0);
        page = alloc_pages_multi_order(..., &order);
        if (!page)
        	goto out;
        if (!(order & (1 << 0))) {
        	VM_WARN_ON(order != 1 << HPAGE_PMD_ORDER);
        	/* THP fault */
        } else {
        	VM_WARN_ON(order != 1 << 0);
        	/* 4k fallback */
        }

The page allocator logic has to be altered so that when it fails on any
zone with order 9, it has to try again with a order 0 before falling
back to the next zone in the zonelist.

After that we need to do more measurements and evaluate if adding an
opt-in feature for guest mode is worth it, to swap "DN 4k | DN+1 THP"
with "DN+1 THP | DN 4k" at every NUMA distance crossing.

Link: http://lkml.kernel.org/r/20190503223146.2312-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Andrea Arcangeli
92717d429b Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
Patch series "reapply: relax __GFP_THISNODE for MADV_HUGEPAGE mappings".

The fixes for what was originally reported as "pathological THP
behavior" we rightfully reverted to be sure not to introduced
regressions at end of a merge window after a severe regression report
from the kernel bot.  We can safely re-apply them now that we had time
to analyze the problem.

The mm process worked fine, because the good fixes were eventually
committed upstream without excessive delay.

The regression reported by the kernel bot however forced us to revert
the good fixes to be sure not to introduce regressions and to give us
the time to analyze the issue further.  The silver lining is that this
extra time allowed to think more at this issue and also plan for a
future direction to improve things further in terms of THP NUMA
locality.

This patch (of 2):

This reverts commit 356ff8a9a7 ("Revert "mm, thp: consolidate THP
gfp handling into alloc_hugepage_direct_gfpmask").  So it reapplies
89c83fb539 ("mm, thp: consolidate THP gfp handling into
alloc_hugepage_direct_gfpmask").

Consolidation of the THP allocation flags at the same place was meant to
be a clean up to easier handle otherwise scattered code which is
imposing a maintenance burden.  There were no real problems observed
with the gfp mask consolidation but the reversion was rushed through
without a larger consensus regardless.

This patch brings the consolidation back because this should make the
long term maintainability easier as well as it should allow future
changes to be less error prone.

[mhocko@kernel.org: changelog additions]
Link: http://lkml.kernel.org/r/20190503223146.2312-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Roman Gushchin
ec9f02384f mm: workingset: fix vmstat counters for shadow nodes
Memcg counters for shadow nodes are broken because the memcg pointer is
obtained in a wrong way. The following approach is used:
        virt_to_page(xa_node)->mem_cgroup

Since commit 4d96ba3530 ("mm: memcg/slab: stop setting
page->mem_cgroup pointer for slab pages") page->mem_cgroup pointer isn't
set for slab pages, so memcg_from_slab_page() should be used instead.

Also I doubt that it ever worked correctly: virt_to_head_page() should
be used instead of virt_to_page().  Otherwise objects residing on tail
pages are not accounted, because only the head page contains a valid
mem_cgroup pointer.  That was a case since the introduction of these
counters by the commit 68d48e6a2d ("mm: workingset: add vmstat counter
for shadow nodes").

Link: http://lkml.kernel.org/r/20190801233532.138743-1-guro@fb.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Isaac J. Manjarres
951531691c mm/usercopy: use memory range to be accessed for wraparound check
Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].

This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.

Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.

Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org
Fixes: f5509cc18d ("mm: Hardened usercopy")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Co-developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Trilok Soni <tsoni@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Catalin Marinas
fcf3a5b62f mm: kmemleak: disable early logging in case of error
If an error occurs during kmemleak_init() (e.g.  kmem cache cannot be
created), kmemleak is disabled but kmemleak_early_log remains enabled.
Subsequently, when the .init.text section is freed, the log_early()
function no longer exists.  To avoid a page fault in such scenario,
ensure that kmemleak_disable() also disables early logging.

Link: http://lkml.kernel.org/r/20190731152302.42073-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Kuppuswamy Sathyanarayanan
5336e52c9e mm/vmalloc.c: fix percpu free VM area search criteria
Recent changes to the vmalloc code by commit 68ad4a3304
("mm/vmalloc.c: keep track of free blocks for vmap allocation") can
cause spurious percpu allocation failures.  These, in turn, can result
in panic()s in the slub code.  One such possible panic was reported by
Dave Hansen in following link https://lkml.org/lkml/2019/6/19/939.
Another related panic observed is,

 RIP: 0033:0x7f46f7441b9b
 Call Trace:
  dump_stack+0x61/0x80
  pcpu_alloc.cold.30+0x22/0x4f
  mem_cgroup_css_alloc+0x110/0x650
  cgroup_apply_control_enable+0x133/0x330
  cgroup_mkdir+0x41b/0x500
  kernfs_iop_mkdir+0x5a/0x90
  vfs_mkdir+0x102/0x1b0
  do_mkdirat+0x7d/0xf0
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

VMALLOC memory manager divides the entire VMALLOC space (VMALLOC_START
to VMALLOC_END) into multiple VM areas (struct vm_areas), and it mainly
uses two lists (vmap_area_list & free_vmap_area_list) to track the used
and free VM areas in VMALLOC space.  And pcpu_get_vm_areas(offsets[],
sizes[], nr_vms, align) function is used for allocating congruent VM
areas for percpu memory allocator.  In order to not conflict with
VMALLOC users, pcpu_get_vm_areas allocates VM areas near the end of the
VMALLOC space.  So the search for free vm_area for the given requirement
starts near VMALLOC_END and moves upwards towards VMALLOC_START.

Prior to commit 68ad4a3304, the search for free vm_area in
pcpu_get_vm_areas() involves following two main steps.

Step 1:
    Find a aligned "base" adress near VMALLOC_END.
    va = free vm area near VMALLOC_END
Step 2:
    Loop through number of requested vm_areas and check,
        Step 2.1:
           if (base < VMALLOC_START)
              1. fail with error
        Step 2.2:
           // end is offsets[area] + sizes[area]
           if (base + end > va->vm_end)
               1. Move the base downwards and repeat Step 2
        Step 2.3:
           if (base + start < va->vm_start)
              1. Move to previous free vm_area node, find aligned
                 base address and repeat Step 2

But Commit 68ad4a3304 removed Step 2.2 and modified Step 2.3 as below:

        Step 2.3:
           if (base + start < va->vm_start || base + end > va->vm_end)
              1. Move to previous free vm_area node, find aligned
                 base address and repeat Step 2

Above change is the root cause of spurious percpu memory allocation
failures.  For example, consider a case where a relatively large vm_area
(~ 30 TB) was ignored in free vm_area search because it did not pass the
base + end < vm->vm_end boundary check.  Ignoring such large free
vm_area's would lead to not finding free vm_area within boundary of
VMALLOC_start to VMALLOC_END which in turn leads to allocation failures.

So modify the search algorithm to include Step 2.2.

Link: http://lkml.kernel.org/r/20190729232139.91131-1-sathyanarayanan.kuppuswamy@linux.intel.com
Fixes: 68ad4a3304 ("mm/vmalloc.c: keep track of free blocks for vmap allocation")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Miles Chen
54a83d6bcb mm/memcontrol.c: fix use after free in mem_cgroup_iter()
This patch is sent to report an use after free in mem_cgroup_iter()
after merging commit be2657752e9e ("mm: memcg: fix use after free in
mem_cgroup_iter()").

I work with android kernel tree (4.9 & 4.14), and commit be2657752e9e
("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged
to the trees.  However, I can still observe use after free issues
addressed in the commit be2657752e9e.  (on low-end devices, a few times
this month)

backtrace:
        css_tryget <- crash here
        mem_cgroup_iter
        shrink_node
        shrink_zones
        do_try_to_free_pages
        try_to_free_pages
        __perform_reclaim
        __alloc_pages_direct_reclaim
        __alloc_pages_slowpath
        __alloc_pages_nodemask

To debug, I poisoned mem_cgroup before freeing it:

  static void __mem_cgroup_free(struct mem_cgroup *memcg)
        for_each_node(node)
        free_mem_cgroup_per_node_info(memcg, node);
        free_percpu(memcg->stat);
  +     /* poison memcg before freeing it */
  +     memset(memcg, 0x78, sizeof(struct mem_cgroup));
        kfree(memcg);
  }

The coredump shows the position=0xdbbc2a00 is freed.

  (gdb) p/x ((struct mem_cgroup_per_node *)0xe5009e00)->iter[8]
  $13 = {position = 0xdbbc2a00, generation = 0x2efd}

  0xdbbc2a00:     0xdbbc2e00      0x00000000      0xdbbc2800      0x00000100
  0xdbbc2a10:     0x00000200      0x78787878      0x00026218      0x00000000
  0xdbbc2a20:     0xdcad6000      0x00000001      0x78787800      0x00000000
  0xdbbc2a30:     0x78780000      0x00000000      0x0068fb84      0x78787878
  0xdbbc2a40:     0x78787878      0x78787878      0x78787878      0xe3fa5cc0
  0xdbbc2a50:     0x78787878      0x78787878      0x00000000      0x00000000
  0xdbbc2a60:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a70:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a80:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a90:     0x00000001      0x00000000      0x00000000      0x00100000
  0xdbbc2aa0:     0x00000001      0xdbbc2ac8      0x00000000      0x00000000
  0xdbbc2ab0:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2ac0:     0x00000000      0x00000000      0xe5b02618      0x00001000
  0xdbbc2ad0:     0x00000000      0x78787878      0x78787878      0x78787878
  0xdbbc2ae0:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2af0:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b00:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b10:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b20:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b30:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b40:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b50:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b60:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b70:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b80:     0x78787878      0x78787878      0x00000000      0x78787878
  0xdbbc2b90:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2ba0:     0x78787878      0x78787878      0x78787878      0x78787878

In the reclaim path, try_to_free_pages() does not setup
sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ...,
shrink_node().

In mem_cgroup_iter(), root is set to root_mem_cgroup because
sc->target_mem_cgroup is NULL.  It is possible to assign a memcg to
root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter().

        try_to_free_pages
        	struct scan_control sc = {...}, target_mem_cgroup is 0x0;
        do_try_to_free_pages
        shrink_zones
        shrink_node
        	 mem_cgroup *root = sc->target_mem_cgroup;
        	 memcg = mem_cgroup_iter(root, NULL, &reclaim);
        mem_cgroup_iter()
        	if (!root)
        		root = root_mem_cgroup;
        	...

        	css = css_next_descendant_pre(css, &root->css);
        	memcg = mem_cgroup_from_css(css);
        	cmpxchg(&iter->position, pos, memcg);

My device uses memcg non-hierarchical mode.  When we release a memcg:
invalidate_reclaim_iterators() reaches only dead_memcg and its parents.
If non-hierarchical mode is used, invalidate_reclaim_iterators() never
reaches root_mem_cgroup.

  static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
  {
        struct mem_cgroup *memcg = dead_memcg;

        for (; memcg; memcg = parent_mem_cgroup(memcg)
        ...
  }

So the use after free scenario looks like:

  CPU1						CPU2

  try_to_free_pages
  do_try_to_free_pages
  shrink_zones
  shrink_node
  mem_cgroup_iter()
      if (!root)
      	root = root_mem_cgroup;
      ...
      css = css_next_descendant_pre(css, &root->css);
      memcg = mem_cgroup_from_css(css);
      cmpxchg(&iter->position, pos, memcg);

        				invalidate_reclaim_iterators(memcg);
        				...
        				__mem_cgroup_free()
        					kfree(memcg);

  try_to_free_pages
  do_try_to_free_pages
  shrink_zones
  shrink_node
  mem_cgroup_iter()
      if (!root)
      	root = root_mem_cgroup;
      ...
      mz = mem_cgroup_nodeinfo(root, reclaim->pgdat->node_id);
      iter = &mz->iter[reclaim->priority];
      pos = READ_ONCE(iter->position);
      css_tryget(&pos->css) <- use after free

To avoid this, we should also invalidate root_mem_cgroup.nodeinfo.iter
in invalidate_reclaim_iterators().

[cai@lca.pw: fix -Wparentheses compilation warning]
  Link: http://lkml.kernel.org/r/1564580753-17531-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20190730015729.4406-1-miles.chen@mediatek.com
Fixes: 5ac8fb31ad ("mm: memcontrol: convert reclaim iterator to simple css refcounting")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Henry Burns
b997052bc3 mm/z3fold.c: fix z3fold_destroy_pool() race condition
The constraint from the zpool use of z3fold_destroy_pool() is there are
no outstanding handles to memory (so no active allocations), but it is
possible for there to be outstanding work on either of the two wqs in
the pool.

Calling z3fold_deregister_migration() before the workqueues are drained
means that there can be allocated pages referencing a freed inode,
causing any thread in compaction to be able to trip over the bad pointer
in PageMovable().

Link: http://lkml.kernel.org/r/20190726224810.79660-2-henryburns@google.com
Fixes: 1f862989b0 ("mm/z3fold.c: support page migration")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jonathan Adams <jwadams@google.com>
Cc: Vitaly Vul <vitaly.vul@sony.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Henry Burns
6051d3bd3b mm/z3fold.c: fix z3fold_destroy_pool() ordering
The constraint from the zpool use of z3fold_destroy_pool() is there are
no outstanding handles to memory (so no active allocations), but it is
possible for there to be outstanding work on either of the two wqs in
the pool.

If there is work queued on pool->compact_workqueue when it is called,
z3fold_destroy_pool() will do:

   z3fold_destroy_pool()
     destroy_workqueue(pool->release_wq)
     destroy_workqueue(pool->compact_wq)
       drain_workqueue(pool->compact_wq)
         do_compact_page(zhdr)
           kref_put(&zhdr->refcount)
             __release_z3fold_page(zhdr, ...)
               queue_work_on(pool->release_wq, &pool->work) *BOOM*

So compact_wq needs to be destroyed before release_wq.

Link: http://lkml.kernel.org/r/20190726224810.79660-1-henryburns@google.com
Fixes: 5d03a66139 ("mm/z3fold.c: use kref to prevent page free/compact race")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jonathan Adams <jwadams@google.com>
Cc: Vitaly Vul <vitaly.vul@sony.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Yang Shi
a53190a4aa mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind
When running syzkaller internally, we ran into the below bug on 4.9.x
kernel:

  kernel BUG at mm/huge_memory.c:2124!
  invalid opcode: 0000 [#1] SMP KASAN
  CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
  task: ffff880067b34900 task.stack: ffff880068998000
  RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124
  Call Trace:
    split_huge_page include/linux/huge_mm.h:100 [inline]
    queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538
    walk_pmd_range mm/pagewalk.c:50 [inline]
    walk_pud_range mm/pagewalk.c:90 [inline]
    walk_pgd_range mm/pagewalk.c:116 [inline]
    __walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208
    walk_page_range+0x154/0x370 mm/pagewalk.c:285
    queue_pages_range+0x115/0x150 mm/mempolicy.c:694
    do_mbind mm/mempolicy.c:1241 [inline]
    SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370
    SyS_mbind+0x46/0x60 mm/mempolicy.c:1352
    do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282
    entry_SYSCALL_64_after_swapgs+0x5d/0xdb
  Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c
  RIP  [<ffffffff81895d6b>] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124
   RSP <ffff88006899f980>

with the below test:

  uint64_t r[1] = {0xffffffffffffffff};

  int main(void)
  {
        syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
                                intptr_t res = 0;
        res = syscall(__NR_socket, 0x11, 3, 0x300);
        if (res != -1)
                r[0] = res;
        *(uint32_t*)0x20000040 = 0x10000;
        *(uint32_t*)0x20000044 = 1;
        *(uint32_t*)0x20000048 = 0xc520;
        *(uint32_t*)0x2000004c = 1;
        syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10);
        syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0);
        *(uint64_t*)0x20000340 = 2;
        syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3);
        return 0;
  }

Actually the test does:

  mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000
  socket(AF_PACKET, SOCK_RAW, 768)        = 3
  setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0
  mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000
  mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0

The setsockopt() would allocate compound pages (16 pages in this test)
for packet tx ring, then the mmap() would call packet_mmap() to map the
pages into the user address space specified by the mmap() call.

When calling mbind(), it would scan the vma to queue the pages for
migration to the new node.  It would split any huge page since 4.9
doesn't support THP migration, however, the packet tx ring compound
pages are not THP and even not movable.  So, the above bug is triggered.

However, the later kernel is not hit by this issue due to commit
d44d363f65 ("mm: don't assume anonymous pages have SwapBacked flag"),
which just removes the PageSwapBacked check for a different reason.

But, there is a deeper issue.  According to the semantic of mbind(), it
should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and
MPOL_MF_STRICT was also specified, but the kernel was unable to move all
existing pages in the range.  The tx ring of the packet socket is
definitely not movable, however, mbind() returns success for this case.

Although the most socket file associates with non-movable pages, but XDP
may have movable pages from gup.  So, it sounds not fine to just check
the underlying file type of vma in vma_migratable().

Change migrate_page_add() to check if the page is movable or not, if it
is unmovable, just return -EIO.  But do not abort pte walk immediately,
since there may be pages off LRU temporarily.  We should migrate other
pages if MPOL_MF_MOVE* is specified.  Set has_unmovable flag if some
paged could not be not moved, then return -EIO for mbind() eventually.

With this change the above test would return -EIO as expected.

[yang.shi@linux.alibaba.com: fix review comments from Vlastimil]
  Link: http://lkml.kernel.org/r/1563556862-54056-3-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1561162809-59140-3-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Yang Shi
d883544515 mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified
When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should
try best to migrate misplaced pages, if some of the pages could not be
migrated, then return -EIO.

There are three different sub-cases:
 1. vma is not migratable
 2. vma is migratable, but there are unmovable pages
 3. vma is migratable, pages are movable, but migrate_pages() fails

If #1 happens, kernel would just abort immediately, then return -EIO,
after a7f40cfe3b ("mm: mempolicy: make mbind() return -EIO when
MPOL_MF_STRICT is specified").

If #3 happens, kernel would set policy and migrate pages with
best-effort, but won't rollback the migrated pages and reset the policy
back.

Before that commit, they behaves in the same way.  It'd better to keep
their behavior consistent.  But, rolling back the migrated pages and
resetting the policy back sounds not feasible, so just make #1 behave as
same as #3.

Userspace will know that not everything was successfully migrated (via
-EIO), and can take whatever steps it deems necessary - attempt
rollback, determine which exact page(s) are violating the policy, etc.

Make queue_pages_range() return 1 to indicate there are unmovable pages
or vma is not migratable.

The #2 is not handled correctly in the current kernel, the following
patch will fix it.

[yang.shi@linux.alibaba.com: fix review comments from Vlastimil]
  Link: http://lkml.kernel.org/r/1563556862-54056-2-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1561162809-59140-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Ralph Campbell
1de13ee592 mm/hmm: fix bad subpage pointer in try_to_unmap_one
When migrating an anonymous private page to a ZONE_DEVICE private page,
the source page->mapping and page->index fields are copied to the
destination ZONE_DEVICE struct page and the page_mapcount() is
increased.  This is so rmap_walk() can be used to unmap and migrate the
page back to system memory.

However, try_to_unmap_one() computes the subpage pointer from a swap pte
which computes an invalid page pointer and a kernel panic results such
as:

  BUG: unable to handle page fault for address: ffffea1fffffffc8

Currently, only single pages can be migrated to device private memory so
no subpage computation is needed and it can be set to "page".

[rcampbell@nvidia.com: add comment]
  Link: http://lkml.kernel.org/r/20190724232700.23327-4-rcampbell@nvidia.com
Link: http://lkml.kernel.org/r/20190719192955.30462-4-rcampbell@nvidia.com
Fixes: a5430dda8a ("mm/migrate: support un-addressable ZONE_DEVICE page in migration")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Ralph Campbell
7ab0ad0e74 mm/hmm: fix ZONE_DEVICE anon page mapping reuse
When a ZONE_DEVICE private page is freed, the page->mapping field can be
set.  If this page is reused as an anonymous page, the previous value
can prevent the page from being inserted into the CPU's anon rmap table.
For example, when migrating a pte_none() page to device memory:

  migrate_vma(ops, vma, start, end, src, dst, private)
    migrate_vma_collect()
      src[] = MIGRATE_PFN_MIGRATE
    migrate_vma_prepare()
      /* no page to lock or isolate so OK */
    migrate_vma_unmap()
      /* no page to unmap so OK */
    ops->alloc_and_copy()
      /* driver allocates ZONE_DEVICE page for dst[] */
    migrate_vma_pages()
      migrate_vma_insert_page()
        page_add_new_anon_rmap()
          __page_set_anon_rmap()
            /* This check sees the page's stale mapping field */
            if (PageAnon(page))
              return
            /* page->mapping is not updated */

The result is that the migration appears to succeed but a subsequent CPU
fault will be unable to migrate the page back to system memory or worse.

Clear the page->mapping field when freeing the ZONE_DEVICE page so stale
pointer data doesn't affect future page use.

Link: http://lkml.kernel.org/r/20190719192955.30462-3-rcampbell@nvidia.com
Fixes: b7a523109f ("mm: don't clear ->mapping in hmm_devmem_free")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Dan Williams
06282373ff mm/memremap: Fix reuse of pgmap instances with internal references
Currently, attempts to shutdown and re-enable a device-dax instance
trigger:

    Missing reference count teardown definition
    WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850
    [..]
    RIP: 0010:devm_memremap_pages+0x234/0x850
    [..]
    Call Trace:
     dev_dax_probe+0x66/0x190 [device_dax]
     really_probe+0xef/0x390
     driver_probe_device+0xb4/0x100
     device_driver_attach+0x4f/0x60

Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.

Fixes: 24917f6b10 ("memremap: provide an optional internal refcount in struct dev_pagemap")
Reported-by: Fan Du <fan.du@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-08-09 14:16:15 -07:00
Christoph Hellwig
9c240a7bb3 mm/hmm: make HMM_MIRROR an implicit option
Make HMM_MIRROR an option that is selected by drivers wanting to use it
instead of a user visible option as it is just a low-level implementation
detail.

Link: https://lore.kernel.org/r/20190806160554.14046-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
f442c283ef mm/hmm: allow HMM_MIRROR on all architectures with MMU
There isn't really any architecture specific code in this page table walk
implementation, so drop the dependencies.

Link: https://lore.kernel.org/r/20190806160554.14046-14-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
251bbe59b7 mm/hmm: cleanup the hmm_vma_walk_hugetlb_entry stub
Stub out the whole function and assign NULL to the .hugetlb_entry method
if CONFIG_HUGETLB_PAGE is not set, as the method won't ever be called in
that case.

Link: https://lore.kernel.org/r/20190806160554.14046-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
9d3973d60f mm/hmm: cleanup the hmm_vma_handle_pmd stub
Stub out the whole function when CONFIG_TRANSPARENT_HUGEPAGE is not set to
make the function easier to read.

Link: https://lore.kernel.org/r/20190806160554.14046-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
f0b3c45c89 mm/hmm: only define hmm_vma_walk_pud if needed
We only need the special pud_entry walker if PUD-sized hugepages and pte
mappings are supported, else the common pagewalk code will take care of
the iteration.  Not implementing this callback reduced the amount of code
compiled for non-x86 platforms, and also fixes compile failures with other
architectures when helpers like pud_pfn are not implemented.

Link: https://lore.kernel.org/r/20190806160554.14046-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
309f9a4f5e mm/hmm: don't abuse pte_index() in hmm_vma_handle_pmd
pte_index is an internal arch helper in various architectures, without
consistent semantics.  Open code that calculation of a PMD index based on
the virtual address instead.

Link: https://lore.kernel.org/r/20190806160554.14046-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
05c23af4a1 mm/hmm: remove the mask variable in hmm_vma_walk_hugetlb_entry
The pagewalk code already passes the value as the hmask parameter.

Link: https://lore.kernel.org/r/20190806160554.14046-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
7f08263d9b mm/hmm: remove the page_shift member from struct hmm_range
All users pass PAGE_SIZE here, and if we wanted to support single entries
for huge pages we should really just add a HMM_FAULT_HUGEPAGE flag instead
that uses the huge page size instead of having the caller calculate that
size once, just for the hmm code to verify it.

Link: https://lore.kernel.org/r/20190806160554.14046-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:06 -03:00
Christoph Hellwig
fac555ac93 mm/hmm: remove superfluous arguments from hmm_range_register
The start, end and page_shift values are all saved in the range structure,
so we might as well use that for argument passing.

Link: https://lore.kernel.org/r/20190806160554.14046-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:05 -03:00
Christoph Hellwig
2cbeb41913 mm/hmm: remove the unused vma argument to hmm_range_dma_unmap
Link: https://lore.kernel.org/r/20190806160554.14046-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 14:58:05 -03:00
Christoph Hellwig
14c5cebad5 memremap: move from kernel/ to mm/
memremap.c implements MM functionality for ZONE_DEVICE, so it really
should be in the mm/ directory, not the kernel/ one.

Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:01 -07:00
Weitao Hou
aa4996b3af mm/memory_hotplug.c: remove unneeded return for void function
return is unneeded in void function

Link: http://lkml.kernel.org/r/20190723130814.21826-1-houweitaoo@gmail.com
Signed-off-by: Weitao Hou <houweitaoo@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:01 -07:00
Ralph Campbell
7b358c6f12 mm/migrate.c: initialize pud_entry in migrate_vma()
When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls
migrate_vma_collect() which initializes a struct mm_walk but didn't
initialize mm_walk.pud_entry.  (Found by code inspection) Use a C
structure initialization to make sure it is set to NULL.

Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com
Fixes: 8763cb45ab ("mm/migrate: new memory migration helper for use with device memory")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:01 -07:00
Mel Gorman
670105a256 mm: compaction: avoid 100% CPU usage during compaction when a task is killed
"howaboutsynergy" reported via kernel buzilla number 204165 that
compact_zone_order was consuming 100% CPU during a stress test for
prolonged periods of time.  Specifically the following command, which
should exit in 10 seconds, was taking an excessive time to finish while
the CPU was pegged at 100%.

  stress -m 220 --vm-bytes 1000000000 --timeout 10

Tracing indicated a pattern as follows

          stress-3923  [007]   519.106208: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106212: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106216: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106219: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106223: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106227: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106231: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106235: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106238: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
          stress-3923  [007]   519.106242: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0

Note that compaction is entered in rapid succession while scanning and
isolating nothing.  The problem is that when a task that is compacting
receives a fatal signal, it retries indefinitely instead of exiting
while making no progress as a fatal signal is pending.

It's not easy to trigger this condition although enabling zswap helps on
the basis that the timing is altered.  A very small window has to be hit
for the problem to occur (signal delivered while compacting and
isolating a PFN for migration that is not aligned to SWAP_CLUSTER_MAX).

This was reproduced locally -- 16G single socket system, 8G swap, 30%
zswap configured, vm-bytes 22000000000 using Colin Kings stress-ng
implementation from github running in a loop until the problem hits).
Tracing recorded the problem occurring almost 200K times in a short
window.  With this patch, the problem hit 4 times but the task existed
normally instead of consuming CPU.

This problem has existed for some time but it was made worse by commit
cf66f0700c ("mm, compaction: do not consider a need to reschedule as
contention").  Before that commit, if the same condition was hit then
locks would be quickly contended and compaction would exit that way.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204165
Link: http://lkml.kernel.org/r/20190718085708.GE24383@techsingularity.net
Fixes: cf66f0700c ("mm, compaction: do not consider a need to reschedule as contention")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:00 -07:00
Jan Kara
ebdf4de564 mm: migrate: fix reference check race between __find_get_block() and migration
buffer_migrate_page_norefs() can race with bh users in the following
way:

CPU1                                    CPU2
buffer_migrate_page_norefs()
  buffer_migrate_lock_buffers()
  checks bh refs
  spin_unlock(&mapping->private_lock)
                                        __find_get_block()
                                          spin_lock(&mapping->private_lock)
                                          grab bh ref
                                          spin_unlock(&mapping->private_lock)
  move page                               do bh work

This can result in various issues like lost updates to buffers (i.e.
metadata corruption) or use after free issues for the old page.

This patch closes the race by holding mapping->private_lock while the
mapping is being moved to a new page.  Ordinarily, a reference can be
taken outside of the private_lock using the per-cpu BH LRU but the
references are checked and the LRU invalidated if necessary.  The
private_lock is held once the references are known so the buffer lookup
slow path will spin on the private_lock.  Between the page lock and
private_lock, it should be impossible for other references to be
acquired and updates to happen during the migration.

A user had reported data corruption issues on a distribution kernel with
a similar page migration implementation as mainline.  The data
corruption could not be reproduced with this patch applied.  A small
number of migration-intensive tests were run and no performance problems
were noted.

[mgorman@techsingularity.net: Changelog, removed tracing]
Link: http://lkml.kernel.org/r/20190718090238.GF24383@techsingularity.net
Fixes: 89cb0888ca "mm: migrate: provide buffer_migrate_page_norefs()"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>	[5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:00 -07:00
Yang Shi
fa1e512fac mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker
Shakeel Butt reported premature oom on kernel with
"cgroup_disable=memory" since mem_cgroup_is_root() returns false even
though memcg is actually NULL.  The drop_caches is also broken.

It is because commit aeed1d325d ("mm/vmscan.c: generalize
shrink_slab() calls in shrink_node()") removed the !memcg check before
!mem_cgroup_is_root().  And, surprisingly root memcg is allocated even
though memory cgroup is disabled by kernel boot parameter.

Add mem_cgroup_disabled() check to make reclaimer work as expected.

Link: http://lkml.kernel.org/r/1563385526-20805-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: aeed1d325d ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Hadrava <had@kam.mff.cuni.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:00 -07:00
Yang Shi
df9576def0 Revert "kmemleak: allow to coexist with fault injection"
When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:

  WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50
  Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata
  CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50
  ...
   kmemleak_alloc+0x4e/0xb0
   kmem_cache_alloc+0x2a7/0x3e0
   mempool_alloc_slab+0x2d/0x40
   mempool_alloc+0x118/0x2b0
   bio_alloc_bioset+0x19d/0x350
   get_swap_bio+0x80/0x230
   __swap_writepage+0x5ff/0xb20

The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3bd ("kmemleak:
allow to coexist with fault injection").  But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.

According to the discussion on the mailing list, the commit should be
reverted for short term solution.  Catalin Marinas would follow up with
a better solution for longer term.

The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.

Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d9570ee3bd ("kmemleak: allow to coexist with fault injection")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03 07:02:00 -07:00
Laura Abbott
1b7e816fc8 mm: slub: Fix slab walking for init_on_free
To properly clear the slab on free with slab_want_init_on_free, we walk
the list of free objects using get_freepointer/set_freepointer.

The value we get from get_freepointer may not be valid.  This isn't an
issue since an actual value will get written later but this means
there's a chance of triggering a bug if we use this value with
set_freepointer:

  kernel BUG at mm/slub.c:306!
  invalid opcode: 0000 [#1] PREEMPT PTI
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4
  RIP: 0010:kfree+0x58a/0x5c0
  Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4
  RSP: 0000:ffffffff82603d90 EFLAGS: 00010002
  RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000
  RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320
  RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000
  R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100
  R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300
  FS:  0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0
  Call Trace:
   apply_wqattrs_prepare+0x154/0x280
   apply_workqueue_attrs_locked+0x4e/0xe0
   apply_workqueue_attrs+0x36/0x60
   alloc_workqueue+0x25a/0x6d0
   workqueue_init_early+0x246/0x348
   start_kernel+0x3c7/0x7ec
   x86_64_start_reservations+0x40/0x49
   x86_64_start_kernel+0xda/0xe4
   secondary_startup_64+0xb6/0xc0
  Modules linked in:
  ---[ end trace f67eb9af4d8d492b ]---

Fix this by ensuring the value we set with set_freepointer is either NULL
or another value in the chain.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-31 13:16:06 -07:00
Linus Torvalds
515f12b9ee HMM patches for 5.3-rc
Fix the locking around nouveau's use of the hmm_range_* APIs. It works
 correctly in the success case, but many of the the edge cases have missing
 unlocks or double unlocks.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl07BG0ACgkQOG33FX4g
 mxr/RA//b1t3rTjyYlzEGpCFouDAJrV8mRrmPZtywzSxhiyKgylWiQ9D5HyAZ8ZG
 evEF1xFe0PcTKiieqnZCJBPh864t+yt9Mm45MpWamBNoHx7WPSdeOMbSDUNvQR+H
 8aWTGBZvdKlqpwD63yvk7C6jkZ6vXDNYROnM395gzlfmaVGBeLygXqcKUkiW1x+D
 1CK+KsBldacxH/gE2X966mXxG46/5VL8KDVoo4VVnpLMDRdRs6zbIBRj7l9+hWbh
 2HABQyvDJW4tYmUW5iHAoLV2fAIE/nJMprEabXvd6rFAPwbryBroguXffGqkIaa0
 Ce1LIhiakCUniK2XgP2W/+KwJQBNp3hQjJr+ip7hgQCtzcD8zRYSxDt5gUtbjpGd
 4JfXrRVrfa08/hBe4adPfE5W5mW3oyEyRHldToT0SrywIY8sTLjN7RdCMwOqrxoR
 QkgqDISLqJab1OQEPHr7QgsgO2c2k19yPpckSZJ+IIldpNtLa9V+eif85NZ/esOd
 2GTWph3UQiACp9fLgEIAvJUnZ0blZpYq9TYshWWYkO34M+KgBdqOn1cQhZH+4rWb
 0Ed/jGdIaPZZ7XaLDgz5e7jl+t+kmSBdqSQtunF4bbu7AwR/zt3es0jq2vFoD451
 syF2vSVKyoBZMESX8X0O2cv+HHpN5oqH1XLI1ABOO09X9lxAPl4=
 =ZdrW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull HMM fixes from Jason Gunthorpe:
 "Fix the locking around nouveau's use of the hmm_range_* APIs. It works
  correctly in the success case, but many of the the edge cases have
  missing unlocks or double unlocks.

  The diffstat is a bit big as Christoph did a comprehensive job to move
  the obsolete API from the core header and into the driver before
  fixing its flow, but the risk of regression from this code motion is
  low"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  nouveau: unlock mmap_sem on all errors from nouveau_range_fault
  nouveau: remove the block parameter to nouveau_range_fault
  mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau
  mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot}
2019-07-30 12:54:44 -07:00
Linus Torvalds
2a11c76e53 virtio, vhost: bugfixes
Fixes in the iommu and balloon devices.
 Disable the meta-data optimization for now - I hope we can get it fixed
 shortly, but there's no point in making users suffer crashes while we
 are working on that.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJdPV3yAAoJECgfDbjSjVRp5qAIAIbzdgGkkuill7++e05fo3zJ
 Vus5ApnFb+VopuiKFAxHyrRhvFun2dftcpOEFC6qpZ1xMcErRa1JTDp+Z70gLPcf
 ZYrT7WoJv202cTQLjlrKwMA4C+hNTGf86KZWls+uzTXngbsrzib99M89wjOTP6UW
 fslOtznbaHw/oPqQSiL40vNUEhU6thnvSxWpaIGJTnU9cx508Q7dE8TpLA5UpuNj
 0y0+0HJrwlNdO2CSOay+dLEkZ/3M0vbXxwcmMNwoPIOx3N58ScCTLF3w6/Zuudco
 XGhUzY6K5UqonVRVoxXMsQru9ZiAhKGMnf3+ugUojm+riPFOrWBbMNkU7mmNIo0=
 =nw3y
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio/vhost fixes from Michael Tsirkin:

 - Fixes in the iommu and balloon devices.

 - Disable the meta-data optimization for now - I hope we can get it
   fixed shortly, but there's no point in making users suffer crashes
   while we are working on that.

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: disable metadata prefetch optimization
  iommu/virtio: Update to most recent specification
  balloon: fix up comments
  mm/balloon_compaction: avoid duplicate page removal
2019-07-29 11:34:12 -07:00
Ralph Campbell
cc374377a1 mm/hmm: remove hmm_range vma
Since hmm_range_fault() doesn't use the struct hmm_range vma field, remove
it.

Link: https://lore.kernel.org/r/20190726005650.2566-8-rcampbell@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 12:35:29 -03:00
Ralph Campbell
f527688d5d mm/hmm: remove hugetlbfs check in hmm_vma_walk_pmd
walk_page_range() will only call hmm_vma_walk_hugetlb_entry() for
hugetlbfs pages and doesn't call hmm_vma_walk_pmd() in this case.

Therefore, it is safe to remove the check for vma->vm_flags & VM_HUGETLB
in hmm_vma_walk_pmd().

Link: https://lore.kernel.org/r/20190726005650.2566-7-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 12:13:10 -03:00
Christoph Hellwig
d45d464b11 mm/hmm: merge hmm_range_snapshot into hmm_range_fault
Add a HMM_FAULT_SNAPSHOT flag so that hmm_range_snapshot can be merged
into the almost identical hmm_range_fault function.

Link: https://lore.kernel.org/r/20190726005650.2566-5-rcampbell@nvidia.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Christoph Hellwig
9a4903e49e mm/hmm: replace the block argument to hmm_range_fault with a flags value
This allows easier expansion to other flags, and also makes the callers a
little easier to read.

Link: https://lore.kernel.org/r/20190726005650.2566-4-rcampbell@nvidia.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Ralph Campbell
d2e8d55116 mm/hmm: a few more C style and comment clean ups
A few more comments and minor programming style clean ups.  There should
be no functional changes.

Link: https://lore.kernel.org/r/20190726005650.2566-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Ralph Campbell
1f96180792 mm/hmm: replace hmm_update with mmu_notifier_range
The hmm_mirror_ops callback function sync_cpu_device_pagetables() passes a
struct hmm_update which is a simplified version of struct
mmu_notifier_range. This is unnecessary so replace hmm_update with
mmu_notifier_range directly.

Link: https://lore.kernel.org/r/20190726005650.2566-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
[jgg: white space tuning]
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-26 11:10:53 -03:00
Jason Gunthorpe
e709accc76 mm/hmm: comment on VM_FAULT_RETRY semantics in handle_mm_fault
The magic dropping of mmap_sem when handle_mm_fault returns VM_FAULT_RETRY
is rather subtile.  Add a comment explaining it.

Link: https://lore.kernel.org/r/20190724065258.16603-8-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[hch: wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-25 16:14:40 -03:00