Commit Graph

2843 Commits

Author SHA1 Message Date
Christoph Hellwig
c8712c6a67 blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
This provides the caller a feedback that a given hctx is not mapped and thus
no command can be sent on it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-23 10:25:48 -06:00
Vivek Goyal
164c80ed84 blk-throttle: Extend slice if throttle group is not empty
Right now, if slice is expired, we start a new slice. If a bio is
queued, we keep on extending slice by throtle_slice interval (100ms).

This worked well as long as pending timer function got executed with-in
few milli seconds of scheduled time. But looks like with recent changes
in timer subsystem, slack can be much longer depending on the expiry time
of the scheduled timer.

commit 500462a9de ("timers: Switch to a non-cascading wheel")

This means, by the time timer function gets executed, it is possible the
delay from scheduled time is more than 100ms. That means current code
will conclude that existing slice has expired and a new one needs to
be started. New slice will be 100ms by default and that will not be
sufficient to meet rate requirement of group given the bio size and
bio will not be dispatched and we will start a new timer function to
wait. And when that timer expires, same process will repeat and we
will wait again and this can easily be an infinite loop.

Solve this issue by starting a new slice only if throttle gropup is
empty. If it is not empty, that means there should be an active slice
going on. Ideally it should not be expired but given the slack, it is
possible that it has expired.

Reported-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-19 15:12:41 -06:00
Jens Axboe
0e87e58bf6 blk-mq: improve warning for running a queue on the wrong CPU
__blk_mq_run_hw_queue() currently warns if we are running the queue on a
CPU that isn't set in its mask. However, this can happen if a CPU is
being offlined, and the workqueue handling will place the work on CPU0
instead. Improve the warning so that it only triggers if the batch cpu
in the hardware queue is currently online.  If it triggers for that
case, then it's indicative of a flow problem in blk-mq, so we want to
retain it for that case.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 15:38:01 -06:00
Jens Axboe
e57690fe00 blk-mq: don't overwrite rq->mq_ctx
We do this in a few places, if the CPU is offline. This isn't allowed,
though, since on multi queue hardware, we can't just move a request
from one software queue to another, if they map to different hardware
queues. The request and tag isn't valid on another hardware queue.

This can happen if plugging races with CPU offlining. But it does
no harm, since it can only happen in the window where we are
currently busy freezing the queue and flushing IO, in preparation
for redoing the software <-> hardware queue mappings.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 15:34:35 -06:00
Ming Lei
4d70dca4ea block: make sure a big bio is split into at most 256 bvecs
After arbitrary bio size was introduced, the incoming bio may
be very big. We have to split the bio into small bios so that
each holds at most BIO_MAX_PAGES bvecs for safety reason, such
as bio_clone().

This patch fixes the following kernel crash:

> [  172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
> [  172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a
> [  172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0
> [  172.660399] Oops: 0000 [#1] SMP
> [...]
> [  172.664780] Call Trace:
> [  172.664813]  [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1]
> [  172.664846]  [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4
> [  172.664880]  [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod]
> [  172.664912]  [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155
> [  172.664947]  [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache]
> [  172.664981]  [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache]
> [  172.665016]  [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache]

The issue can be reproduced by the following steps:
	- create one raid1 over two virtio-blk
	- build bcache device over the above raid1 and another cache device
	and bucket size is set as 2Mbytes
	- set cache mode as writeback
	- run random write over ext4 on the bcache device

Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios)
Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de>
Reported-by: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: stable@vger.kernel.org (4.3+)
Cc: Shaohua Li <shli@fb.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-24 08:17:24 -06:00
Bart Van Assche
1b85608681 block: Fix race triggered by blk_set_queue_dying()
blk_set_queue_dying() can be called while another thread is
submitting I/O or changing queue flags, e.g. through dm_stop_queue().
Hence protect the QUEUE_FLAG_DYING flag change with locking.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16 19:36:14 -06:00
Adrian Hunter
7afafc8a44 block: Fix secure erase
Commit 288dab8a35 ("block: add a separate operation type for secure
erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering
all the places REQ_OP_DISCARD was being used to mean either. Fix those.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 288dab8a35 ("block: add a separate operation type for secure erase")
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-16 09:16:51 -06:00
Jens Axboe
1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Jens Axboe
c0f3fd2b38 blk-mq: fix deadlock in blk_mq_register_disk() error path
If we fail registering any of the hardware queues, we call
into blk_mq_unregister_disk() with the hotplug mutex already
held. Since blk_mq_unregister_disk() attempts to acquire the
same mutex, we end up in a less than happy place.

Reported-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Dan Williams
df08c32ce3 block: fix bdi vs gendisk lifetime mismatch
The name for a bdi of a gendisk is derived from the gendisk's devt.
However, since the gendisk is destroyed before the bdi it leaves a
window where a new gendisk could dynamically reuse the same devt while a
bdi with the same name is still live.  Arrange for the bdi to hold a
reference against its "owner" disk device while it is registered.
Otherwise we can hit sysfs duplicate name collisions like the following:

 WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1'

 Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015
  0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec
  ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351
  0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8
 Call Trace:
  [<ffffffff8134caec>] dump_stack+0x63/0x87
  [<ffffffff8108c351>] __warn+0xd1/0xf0
  [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80
  [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90
  [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320
  [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0
  [<ffffffff8134ff55>] kobject_add+0x75/0xd0
  [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f
  [<ffffffff8148b0a5>] device_add+0x125/0x610
  [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100
  [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20
  [<ffffffff811b775c>] bdi_register+0x8c/0x180
  [<ffffffff811b7877>] bdi_register_dev+0x27/0x30
  [<ffffffff813317f5>] add_disk+0x175/0x4a0

Cc: <stable@vger.kernel.org>
Reported-by: Yi Zhang <yizhan@redhat.com>
Tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Fixed up missing 0 return in bdi_register_owner().

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Gabriel Krisman Bertazi
71f79fb317 blk-mq: Allow timeouts to run while queue is freezing
In case a submitted request gets stuck for some reason, the block layer
can prevent the request starvation by starting the scheduled timeout work.
If this stuck request occurs at the same time another thread has started
a queue freeze, the blk_mq_timeout_work will not be able to acquire the
queue reference and will return silently, thus not issuing the timeout.
But since the request is already holding a q_usage_counter reference and
is unable to complete, it will never release its reference, preventing
the queue from completing the freeze started by first thread.  This puts
the request_queue in a hung state, forever waiting for the freeze
completion.

This was observed while running IO to a NVMe device at the same time we
toggled the CPU hotplug code. Eventually, once a request got stuck
requiring a timeout during a queue freeze, we saw the CPU Hotplug
notification code get stuck inside blk_mq_freeze_queue_wait, as shown in
the trace below.

[c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable)
[c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350
[c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990
[c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0
[c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110
[c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0
[c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100
[c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0
[c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400
[c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0
[c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50
[c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140
[c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0
[c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0
[c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0
[c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200
[c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0
[c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230
[c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110
[c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4

The fix is to allow the timeout work to execute in the window between
dropping the initial refcount reference and the release of the last
reference, which actually marks the freeze completion.  This can be
achieved with percpu_refcount_tryget, which does not require the counter
to be alive.  This way the timeout work can do it's job and terminate a
stuck request even during a freeze, returning its reference and avoiding
the deadlock.

Allowing the timeout to run is just a part of the fix, since for some
devices, we might get stuck again inside the device driver's timeout
handler, should it attempt to allocate a new request in that path -
which is a quite common action for Abort commands, which need to be sent
after a timeout.  In NVMe, for instance, we call blk_mq_alloc_request
from inside the timeout handler, which will fail during a freeze, since
it also tries to acquire a queue reference.

I considered a similar change to blk_mq_alloc_request as a generic
solution for further device driver hangs, but we can't do that, since it
would allow new requests to disturb the freeze process.  I thought about
creating a new function in the block layer to support unfreezable
requests for these occasions, but after working on it for a while, I
feel like this should be handled in a per-driver basis.  I'm now
experimenting with changes to the NVMe timeout path, but I'm open to
suggestions of ways to make this generic.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Vegard Nossum
77da160530 block: fix use-after-free in seq file
I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Paolo Valente
20bd723ec6 block: add missing group association in bio-cloning functions
When a bio is cloned, the newly created bio must be associated with
the same blkcg as the original bio (if BLK_CGROUP is enabled). If
this operation is not performed, then the new bio is not associated
with any group, and the group of the current task is returned when
the group of the bio is requested.

Depending on the cloning frequency, this may cause a large
percentage of the bios belonging to a given group to be treated
as if belonging to other groups (in most cases as if belonging to
the root group). The expected group isolation may thereby be broken.

This commit adds the missing association in bio-cloning functions.

Fixes: da2f0f74cf ("Btrfs: add support for blkio controllers")
Cc: stable@vger.kernel.org # v4.3+

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Hou Tao
bfd279a868 blkcg: kill unused field nr_undestroyed_grps
'nr_undestroyed_grps' in struct throtl_data was used to count
the number of throtl_grp related with throtl_data, but now
throtl_grp is tracked by blkcg_gq, so it is useless anymore.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04 14:19:16 -06:00
Ross Zwisler
99a01cdf9d block: remove BLK_DEV_DAX config option
The functionality for block device DAX was already removed with commit
acc93d30d7 ("Revert "block: enable dax for raw block devices"")

However, we still had a config option hanging around that was always
disabled because it depended on CONFIG_BROKEN.  This config option was
introduced in commit 03cdadb040 ("block: disable block device DAX by
default")

This change reverts that commit, removing the dead config option.

Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Linus Torvalds
3fc9d69093 Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "This branch also contains core changes.  I've come to the conclusion
  that from 4.9 and forward, I'll be doing just a single branch.  We
  often have dependencies between core and drivers, and it's hard to
  always split them up appropriately without pulling core into drivers
  when that happens.

  That said, this contains:

   - separate secure erase type for the core block layer, from
     Christoph.

   - set of discard fixes, from Christoph.

   - bio shrinking fixes from Christoph, as a followup up to the
     op/flags change in the core branch.

   - map and append request fixes from Christoph.

   - NVMeF (NVMe over Fabrics) code from Christoph.  This is pretty
     exciting!

   - nvme-loop fixes from Arnd.

   - removal of ->driverfs_dev from Dan, after providing a
     device_add_disk() helper.

   - bcache fixes from Bhaktipriya and Yijing.

   - cdrom subchannel read fix from Vchannaiah.

   - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.

   - set of drbd updates and fixes from Fabian, Lars, and Philipp.

   - mg_disk error path fix from Bart.

   - user notification for failed device add for loop, from Minfei.

   - NVMe in general:
        + NVMe delay quirk from Guilherme.
        + SR-IOV support and command retry limits from Keith.
        + fix for memory-less NUMA node from Masayoshi.
        + use UINT_MAX for discard sectors, from Minfei.
        + cancel IO fixes from Ming.
        + don't allocate unused major, from Neil.
        + error code fixup from Dan.
        + use constants for PSDT/FUSE from James.
        + variable init fix from Jay.
        + fabrics fixes from Ming, Sagi, and Wei.
        + various fixes"

* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
  nvme/pci: Provide SR-IOV support
  nvme: initialize variable before logical OR'ing it
  block: unexport various bio mapping helpers
  scsi/osd: open code blk_make_request
  target: stop using blk_make_request
  block: simplify and export blk_rq_append_bio
  block: ensure bios return from blk_get_request are properly initialized
  virtio_blk: use blk_rq_map_kern
  memstick: don't allow REQ_TYPE_BLOCK_PC requests
  block: shrink bio size again
  block: simplify and cleanup bvec pool handling
  block: get rid of bio_rw and READA
  block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
  block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
  NVMe: don't allocate unused nvme_major
  nvme: avoid crashes when node 0 is memoryless node.
  nvme: Limit command retries
  loop: Make user notify for adding loop device failed
  nvme-loop: fix nvme-loop Kconfig dependencies
  nvmet: fix return value check in nvmet_subsys_alloc()
  ...
2016-07-26 15:37:51 -07:00
Linus Torvalds
d05d7f4079 Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...
2016-07-26 15:03:07 -07:00
Linus Torvalds
55392c4c06 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "This update provides the following changes:

   - The rework of the timer wheel which addresses the shortcomings of
     the current wheel (cascading, slow search for next expiring timer,
     etc).  That's the first major change of the wheel in almost 20
     years since Finn implemted it.

   - A large overhaul of the clocksource drivers init functions to
     consolidate the Device Tree initialization

   - Some more Y2038 updates

   - A capability fix for timerfd

   - Yet another clock chip driver

   - The usual pile of updates, comment improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
  tick/nohz: Optimize nohz idle enter
  clockevents: Make clockevents_subsys static
  clocksource/drivers/time-armada-370-xp: Fix return value check
  timers: Implement optimization for same expiry time in mod_timer()
  timers: Split out index calculation
  timers: Only wake softirq if necessary
  timers: Forward the wheel clock whenever possible
  timers/nohz: Remove pointless tick_nohz_kick_tick() function
  timers: Optimize collect_expired_timers() for NOHZ
  timers: Move __run_timers() function
  timers: Remove set_timer_slack() leftovers
  timers: Switch to a non-cascading wheel
  timers: Reduce the CPU index space to 256k
  timers: Give a few structs and members proper names
  hlist: Add hlist_is_singular_node() helper
  signals: Use hrtimer for sigtimedwait()
  timers: Remove the deprecated mod_timer_pinned() API
  timers, net/ipv4/inet: Initialize connection request timers as pinned
  timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
  timers, drivers/tty/metag_da: Initialize the poll timer as pinned
  ...
2016-07-25 20:43:12 -07:00
Damien Le Moal
17007f3994 block: Fix front merge check
For a front merge, the maximum number of sectors of the
request must be checked against the front merge BIO sector,
not the current sector of the request.

Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:40:47 -06:00
Tahsin Erdogan
72ef799b3f block: do not merge requests without consulting with io scheduler
Before merging a bio into an existing request, io scheduler is called to
get its approval first. However, the requests that come from a plug
flush may get merged by block layer without consulting with io
scheduler.

In case of CFQ, this can cause fairness problems. For instance, if a
request gets merged into a low weight cgroup's request, high weight cgroup
now will depend on low weight cgroup to get scheduled. If high weigt cgroup
needs that io request to complete before submitting more requests, then it
will also lose its timeslice.

Following script demonstrates the problem. Group g1 has a low weight, g2
and g3 have equal high weights but g2's requests are adjacent to g1's
requests so they are subject to merging. Due to these merges, g2 gets
poor disk time allocation.

cat > cfq-merge-repro.sh << "EOF"
#!/bin/bash
set -e

IO_ROOT=/mnt-cgroup/io

mkdir -p $IO_ROOT

if ! mount | grep -qw $IO_ROOT; then
  mount -t cgroup none -oblkio $IO_ROOT
fi

cd $IO_ROOT

for i in g1 g2 g3; do
  if [ -d $i ]; then
    rmdir $i
  fi
done

mkdir g1 && echo 10 > g1/blkio.weight
mkdir g2 && echo 495 > g2/blkio.weight
mkdir g3 && echo 495 > g3/blkio.weight

RUNTIME=10

(echo $BASHPID > g1/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=0k &> /dev/null)&

(echo $BASHPID > g2/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=64k &> /dev/null)&

(echo $BASHPID > g3/cgroup.procs &&
 fio --readonly --name name1 --filename /dev/sdb \
     --rw read --size 64k --bs 64k --time_based \
     --runtime=$RUNTIME --offset=256k &> /dev/null)&

sleep $((RUNTIME+1))

for i in g1 g2 g3; do
  echo ---- $i ----
  cat $i/blkio.time
done

EOF
# ./cfq-merge-repro.sh
---- g1 ----
8:16 162
---- g2 ----
8:16 165
---- g3 ----
8:16 686

After applying the patch:

# ./cfq-merge-repro.sh
---- g1 ----
8:16 90
---- g2 ----
8:16 445
---- g3 ----
8:16 471

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:35:12 -06:00
Bart Van Assche
68bdf1ac2a block: Fix spelling in a source code comment
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:28:22 -06:00
Yigal Korman
ea6ca600eb block: expose QUEUE_FLAG_DAX in sysfs
Provides the ability to identify DAX enabled devices in userspace.

Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 21:01:08 -06:00
Christoph Hellwig
f9cc4472c9 block: unexport various bio mapping helpers
They are unused and potential new users really should use the
blk_rq_map* versions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:38:37 -06:00
Christoph Hellwig
4613c5f1df scsi/osd: open code blk_make_request
I wish the OSD code could simply use blk_rq_map_* helpers like
everyone else, but the complex nature of deciding if we have
DATA IN and/or DATA OUT buffers might make this impossible
(at least for a mere human like me).

But using blk_rq_append_bio at least allows sharing the setup code
between request with or without dat a buffers, and given that this
is the last user of blk_make_request it allows getting rid of that
somewhat awkward interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:38:35 -06:00
Christoph Hellwig
98d61d5b1a block: simplify and export blk_rq_append_bio
The target SCSI passthrough backend is much better served with the low-level
blk_rq_append_bio construct then the helpers built on top of it, so export it.

Also use the opportunity to remove the pointless request_queue argument and
make the code flow a little more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:38:32 -06:00
Christoph Hellwig
0c4de0f33b block: ensure bios return from blk_get_request are properly initialized
blk_get_request is used for BLOCK_PC and similar passthrough requests.
Currently we always need to call blk_rq_set_block_pc or an open coded
version of it to allow appending bios using the request mapping helpers
later on, which is a somewhat awkward API.  Instead move the
initialization part of blk_rq_set_block_pc into blk_get_request, so that
we always have a safe to use request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:38:30 -06:00
Christoph Hellwig
ed996a52c8 block: simplify and cleanup bvec pool handling
Instead of a flag and an index just make sure an index of 0 means
no need to free the bvec array.  Also move the constants related
to the bvec pools together and use a consistent naming scheme for
them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:37:02 -06:00
Christoph Hellwig
3f40bf2c89 block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
WRITE SAME is a data integrity operation and we can't simply ignore
errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:35:22 -06:00
Christoph Hellwig
e950fdf71c block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
Currently blkdev_issue_zeroout cascades down from discards (if the driver
guarantees that discards zero data), to WRITE SAME and then to a loop
writing zeroes.  Unfortunately we ignore run-time EOPNOTSUPP errors in the
block layer blkdev_issue_discard helper to work around DM volumes that
may have mixed discard support underneath.

This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to
blkdev_issue_discard that indicates we are called for zeroing operation.
This allows both to ignore the EOPNOTSUPP hack and actually consolidating
the discard_zeroes_data check into the function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:35:20 -06:00
Gabriel Krisman Bertazi
9c8747167e block: atari: Return early for unsupported sector size
For 4K LBA or very large disks, atari_partition can easily get tricked
into thinking it has found an Atari partition table.  Depending on the
data in the disk, it ends up creating partitions with awkward lengths.

We saw logs like this while playing with fio.

[5.625867] nvme2n1: AHDI p2
[5.625872] nvme2n1: p2 size 2910030523 extends beyond EOD, truncated

People has had issues with misinterpreted AHDI partition tables for a long
time, see this BSD thread from 1995, for example.

https://mail-index.netbsd.org/port-atari/1995/11/19/0001.html

Since the atari partition, according to the spec, doesn't even support
sector sizes with more than 512, a quick sanity check is reasonable to
just bail out early, before even attempting to read sector 0.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-13 09:31:44 -07:00
Jens Axboe
41d512e51b Merge branch 'for-4.8/block' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm into for-4.8/drivers
Dan writes:

"The removal of ->driverfs_dev in favor of just passing the parent
device in as a parameter to add_disk().  See below, it has received a
"Reviewed-by" from Christoph, Bart, and Johannes.

It is also a pre-requisite for Fam Zheng's work to cleanup gendisk
uevents vs attribute visibility [1].  We would extend device_add_disk()
to take an attribute_group list.

This is based off a branch of block.git/for-4.8/drivers and has
received a positive build success notification from the kbuild robot
across several configs.

[1]: "gendisk: Generate uevent after attribute available"
http://marc.info/?l=linux-virtualization&m=146725201522201&w=2"
2016-07-08 16:04:11 -06:00
Sagi Grimberg
486cf9899e blk-mq: Introduce blk_mq_reinit_tagset
The new nvme-rdma driver will need to reinitialize all the tags as part of
the error recovery procedure (realloc the tag memory region). Add a helper
in blk-mq for it that can iterate over all requests in a tagset to make
this easier.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Stephen Bates <Stephen.Bates@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Thomas Gleixner
53bf837b78 timers: Remove set_timer_slack() leftovers
We now have implicit batching in the timer wheel. The slack API is no longer
used, so remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07 10:35:09 +02:00
Sagi Grimberg
9645c1a233 block: Export blk_poll
The new NVMe over fabrics target will make use of this outside from a
module.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:30:31 -06:00
Ming Lin
1f5bd336b9 blk-mq: add blk_mq_alloc_request_hctx
For some protocols like NVMe over Fabrics we need to be able to send
initialization commands to a specific queue.

Based on an earlier patch from Christoph Hellwig <hch@lst.de>.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
[hch: disallow sleeping allocation, req_op fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:07 -06:00
Omar Sandoval
8ba8682107 block: fix use-after-free in sys_ioprio_get()
get_task_ioprio() accesses the task->io_context without holding the task
lock and thus can race with exit_io_context(), leading to a
use-after-free. The reproducer below hits this within a few seconds on
my 4-core QEMU VM:

#define _GNU_SOURCE
#include <assert.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/wait.h>

int main(int argc, char **argv)
{
	pid_t pid, child;
	long nproc, i;

	/* ioprio_set(IOPRIO_WHO_PROCESS, 0, IOPRIO_PRIO_VALUE(IOPRIO_CLASS_IDLE, 0)); */
	syscall(SYS_ioprio_set, 1, 0, 0x6000);

	nproc = sysconf(_SC_NPROCESSORS_ONLN);

	for (i = 0; i < nproc; i++) {
		pid = fork();
		assert(pid != -1);
		if (pid == 0) {
			for (;;) {
				pid = fork();
				assert(pid != -1);
				if (pid == 0) {
					_exit(0);
				} else {
					child = wait(NULL);
					assert(child == pid);
				}
			}
		}

		pid = fork();
		assert(pid != -1);
		if (pid == 0) {
			for (;;) {
				/* ioprio_get(IOPRIO_WHO_PGRP, 0); */
				syscall(SYS_ioprio_get, 2, 0);
			}
		}
	}

	for (;;) {
		/* ioprio_get(IOPRIO_WHO_PGRP, 0); */
		syscall(SYS_ioprio_get, 2, 0);
	}

	return 0;
}

This gets us KASAN dumps like this:

[   35.526914] ==================================================================
[   35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c
[   35.530009] Read of size 2 by task ioprio-gpf/363
[   35.530009] =============================================================================
[   35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected
[   35.530009] -----------------------------------------------------------------------------

[   35.530009] Disabling lock debugging due to kernel taint
[   35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360
[   35.530009] 	___slab_alloc+0x55d/0x5a0
[   35.530009] 	__slab_alloc.isra.20+0x2b/0x40
[   35.530009] 	kmem_cache_alloc_node+0x84/0x200
[   35.530009] 	create_task_io_context+0x2b/0x370
[   35.530009] 	get_task_io_context+0x92/0xb0
[   35.530009] 	copy_process.part.8+0x5029/0x5660
[   35.530009] 	_do_fork+0x155/0x7e0
[   35.530009] 	SyS_clone+0x19/0x20
[   35.530009] 	do_syscall_64+0x195/0x3a0
[   35.530009] 	return_from_SYSCALL_64+0x0/0x6a
[   35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060
[   35.530009] 	__slab_free+0x27b/0x3d0
[   35.530009] 	kmem_cache_free+0x1fb/0x220
[   35.530009] 	put_io_context+0xe7/0x120
[   35.530009] 	put_io_context_active+0x238/0x380
[   35.530009] 	exit_io_context+0x66/0x80
[   35.530009] 	do_exit+0x158e/0x2b90
[   35.530009] 	do_group_exit+0xe5/0x2b0
[   35.530009] 	SyS_exit_group+0x1d/0x20
[   35.530009] 	entry_SYSCALL_64_fastpath+0x1a/0xa4
[   35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080
[   35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001
[   35.530009] ==================================================================

Fix it by grabbing the task lock while we poke at the io_context.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-01 08:39:24 -06:00
Jan Kara
0b31c10c66 cfq-iosched: Charge at least 1 jiffie instead of 1 ns
Commit 9a7f38c42c (cfq-iosched: Convert from jiffies to nanoseconds)
could result in charging just 1 ns to a cgroup submitting IO instead of 1
jiffie we always charged before. It is arguable what is the right amount
to change but for now lets retain the old behavior of always charging at
least one jiffie.

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:50 -06:00
Jan Kara
149321a611 cfq-iosched: Fix regression in bonnie++ rewrite performance
Commit 9a7f38c42c (cfq-iosched: Convert from jiffies to nanoseconds)
broke the condition for detecting starved sync IO in
cfq_completed_request() because rq->start_time remained in jiffies but
we compared it with nanosecond values. This manifested as a regression
in bonnie++ rewrite performance because we always ended up considering
sync IO starved and thus never increased async IO queue depth.

Since rq->start_time is used in a lot of places, converting it to ns
values would be non-trivial. So just revert the condition in CFQ to use
comparison with jiffies. This will lead to suboptimal results if
cfq_fifo_expire[1] will ever come close to 1 jiffie but so far we are
relatively far from that with the storage used with CFQ (the default
value is 128 ms).

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:48 -06:00
Jan Kara
93fdf1478a cfq-iosched: Convert slice_resid from u64 to s64
slice_resid can be both positive and negative. Commit 9a7f38c42c
(cfq-iosched: Convert from jiffies to nanoseconds) converted it from
long to u64. Although this did not introduce any functional regression
(the operations just overflow and the result was fine), it is certainly
wrong and could cause issues in future. So convert the type to more
appropriate s64.

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:46 -06:00
Jan Kara
9828c2c6c1 block: Convert fifo_time from ulong to u64
Currently rq->fifo_time is unsigned long but CFQ stores nanosecond
timestamp in it which would overflow on 32-bit archs. Convert it to u64
to avoid the overflow. Since the rq->fifo_time is unioned with struct
call_single_data(), this does not change the size of struct request in
any way.

We have to slightly fixup block/deadline-iosched.c so that comparison
happens in the right types.

Fixes: 9a7f38c42c
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 08:21:44 -06:00
Dan Williams
52c44d93c2 block: remove ->driverfs_dev
Now that all drivers that specify a ->driverfs_dev have been converted
to device_add_disk(), the pointer can be removed from struct gendisk.

Cc: Jens Axboe <axboe@fb.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27 12:26:08 -07:00
Dan Williams
e63a46bef0 block: introduce device_add_disk()
In preparation for removing the ->driverfs_dev member of a gendisk, add
an api that takes the parent device as a parameter to add_disk().  For
now this maintains the status quo of WARN()ing on failure, but not
return a error code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-15 19:53:06 -07:00
Bart Van Assche
e1f3b9412e block/blk-cgroup.c: Declare local symbols static
Detected by sparse.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14 09:09:33 -06:00
Bart Van Assche
1179a5a085 block/bio-integrity.c: Add #include "blk.h"
This patch avoids that building with W=1 C=2 triggers the following
warning:

block/bio-integrity.c:35:6: warning: symbol 'blk_flush_integrity' was not declared. Should it be static?

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14 09:09:17 -06:00
Bart Van Assche
aa8d15bfe4 block/partition-generic.c: Remove a set-but-not-used variable
A value is assigned to the variable 'info' but that value is never
used. Hence remove the variable 'info'.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14 09:09:15 -06:00
Jens Axboe
b8269db456 cfq-iosched: temporarily boost queue priority for idle classes
If we're queuing REQ_PRIO IO and the task is running at an idle IO
class, then temporarily boost the priority. This prevents livelocks
due to priority inversion, when a low priority task is holding file
system resources while attempting to do IO.

An example of that is shown below. An ioniced idle task is holding
the directory mutex, while a normal priority task is trying to do
a directory lookup.

[478381.198925] ------------[ cut here ]------------
[478381.200315] INFO: task ionice:1168369 blocked for more than 120 seconds.
[478381.201324]       Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1
[478381.202278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[478381.203462] ionice          D ffff8803692736a8     0 1168369      1 0x00000080
[478381.203466]  ffff8803692736a8 ffff880399c21300 ffff880276adcc00 ffff880369273698
[478381.204589]  ffff880369273fd8 0000000000000000 7fffffffffffffff 0000000000000002
[478381.205752]  ffffffff8177d5e0 ffff8803692736c8 ffffffff8177cea7 0000000000000000
[478381.206874] Call Trace:
[478381.207253]  [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80
[478381.208175]  [<ffffffff8177cea7>] schedule+0x37/0x90
[478381.208932]  [<ffffffff8177f5fc>] schedule_timeout+0x1dc/0x250
[478381.209805]  [<ffffffff81421c17>] ? __blk_run_queue+0x37/0x50
[478381.210706]  [<ffffffff810ca1c5>] ? ktime_get+0x45/0xb0
[478381.211489]  [<ffffffff8177c407>] io_schedule_timeout+0xa7/0x110
[478381.212402]  [<ffffffff810a8c2b>] ? prepare_to_wait+0x5b/0x90
[478381.213280]  [<ffffffff8177d616>] bit_wait_io+0x36/0x50
[478381.214063]  [<ffffffff8177d325>] __wait_on_bit+0x65/0x90
[478381.214961]  [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80
[478381.215872]  [<ffffffff8177d47c>] out_of_line_wait_on_bit+0x7c/0x90
[478381.216806]  [<ffffffff810a89f0>] ? wake_atomic_t_function+0x40/0x40
[478381.217773]  [<ffffffff811f03aa>] __wait_on_buffer+0x2a/0x30
[478381.218641]  [<ffffffff8123c557>] ext4_bread+0x57/0x70
[478381.219425]  [<ffffffff8124498c>] __ext4_read_dirblock+0x3c/0x380
[478381.220467]  [<ffffffff8124665d>] ext4_dx_find_entry+0x7d/0x170
[478381.221357]  [<ffffffff8114c49e>] ? find_get_entry+0x1e/0xa0
[478381.222208]  [<ffffffff81246bd4>] ext4_find_entry+0x484/0x510
[478381.223090]  [<ffffffff812471a2>] ext4_lookup+0x52/0x160
[478381.223882]  [<ffffffff811c401d>] lookup_real+0x1d/0x60
[478381.224675]  [<ffffffff811c4698>] __lookup_hash+0x38/0x50
[478381.225697]  [<ffffffff817745bd>] lookup_slow+0x45/0xab
[478381.226941]  [<ffffffff811c690e>] link_path_walk+0x7ae/0x820
[478381.227880]  [<ffffffff811c6a42>] path_init+0xc2/0x430
[478381.228677]  [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20
[478381.229776]  [<ffffffff811c8c57>] path_openat+0x77/0x620
[478381.230767]  [<ffffffff81185c6e>] ? page_add_file_rmap+0x2e/0x70
[478381.232019]  [<ffffffff811cb253>] do_filp_open+0x43/0xa0
[478381.233016]  [<ffffffff8108c4a9>] ? creds_are_invalid+0x29/0x70
[478381.234072]  [<ffffffff811c0cb0>] do_open_execat+0x70/0x170
[478381.235039]  [<ffffffff811c1bf8>] do_execveat_common.isra.36+0x1b8/0x6e0
[478381.236051]  [<ffffffff811c214c>] do_execve+0x2c/0x30
[478381.236809]  [<ffffffff811ca392>] ? getname+0x12/0x20
[478381.237564]  [<ffffffff811c23be>] SyS_execve+0x2e/0x40
[478381.238338]  [<ffffffff81780a1d>] stub_execve+0x6d/0xa0
[478381.239126] ------------[ cut here ]------------
[478381.239915] ------------[ cut here ]------------
[478381.240606] INFO: task python2.7:1168375 blocked for more than 120 seconds.
[478381.242673]       Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1
[478381.243653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[478381.244902] python2.7       D ffff88005cf8fb98     0 1168375 1168248 0x00000080
[478381.244904]  ffff88005cf8fb98 ffff88016c1f0980 ffffffff81c134c0 ffff88016c1f11a0
[478381.246023]  ffff88005cf8ffd8 ffff880466cd0cbc ffff88016c1f0980 00000000ffffffff
[478381.247138]  ffff880466cd0cc0 ffff88005cf8fbb8 ffffffff8177cea7 ffff88005cf8fcc8
[478381.248252] Call Trace:
[478381.248630]  [<ffffffff8177cea7>] schedule+0x37/0x90
[478381.249382]  [<ffffffff8177d08e>] schedule_preempt_disabled+0xe/0x10
[478381.250465]  [<ffffffff8177e892>] __mutex_lock_slowpath+0x92/0x100
[478381.251409]  [<ffffffff8177e91b>] mutex_lock+0x1b/0x2f
[478381.252199]  [<ffffffff817745ae>] lookup_slow+0x36/0xab
[478381.253023]  [<ffffffff811c690e>] link_path_walk+0x7ae/0x820
[478381.253877]  [<ffffffff811aeb41>] ? try_charge+0xc1/0x700
[478381.254690]  [<ffffffff811c6a42>] path_init+0xc2/0x430
[478381.255525]  [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20
[478381.256450]  [<ffffffff811c8c57>] path_openat+0x77/0x620
[478381.257256]  [<ffffffff8115b2fb>] ? lru_cache_add_active_or_unevictable+0x2b/0xa0
[478381.258390]  [<ffffffff8117b623>] ? handle_mm_fault+0x13f3/0x1720
[478381.259309]  [<ffffffff811cb253>] do_filp_open+0x43/0xa0
[478381.260139]  [<ffffffff811d7ae2>] ? __alloc_fd+0x42/0x120
[478381.260962]  [<ffffffff811b95ac>] do_sys_open+0x13c/0x230
[478381.261779]  [<ffffffff81011393>] ? syscall_trace_enter_phase1+0x113/0x170
[478381.262851]  [<ffffffff811b96c2>] SyS_open+0x22/0x30
[478381.263598]  [<ffffffff81780532>] system_call_fastpath+0x12/0x17
[478381.264551] ------------[ cut here ]------------
[478381.265377] ------------[ cut here ]------------

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
2016-06-09 16:15:01 -06:00
Omar Sandoval
52b9c330c6 blk-mq: actually hook up defer list when running requests
If ->queue_rq() returns BLK_MQ_RQ_QUEUE_OK, we use continue and skip
over the rest of the loop body. However, dptr is assigned later in the
loop body, and the BLK_MQ_RQ_QUEUE_OK case is exactly the case that we'd
want it for.

NVMe isn't actually using BLK_MQ_F_DEFER_ISSUE yet, nor is any other
in-tree driver, but if the code's going to be there, it might as well
work.

Fixes: 74c450521d ("blk-mq: add a 'list' parameter to ->queue_rq()")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09 09:55:15 -06:00
Christoph Hellwig
288dab8a35 block: add a separate operation type for secure erase
Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-09 09:52:25 -06:00
Jan Kara
9114832581 cfq-iosched: Convert to use highres timers
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:56:06 -06:00
Jeff Moyer
d2d481d04f cfq-iosched: Expose microsecond interfaces
Expose interfaces to tune time slices of CFQ IO scheduler in
microseconds.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-08 08:56:03 -06:00