Commit Graph

3173 Commits

Author SHA1 Message Date
Linus Torvalds
ccc039d65f MMC highlights for 3.14:
Core:
  - Avoid get_cd() on cards marked nonremovable.
 
 Drivers:
  - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC.
  - dwmmc: Support Hisilicon K3 SoC controllers.
  - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM.
  - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
    like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540.
  - tegra: Support Tegra124 SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJS5G3QAAoJEHNBYZ7TNxYMO2AP/j5JoGfNCga/Ub708yGdJJvm
 /2j2dmfrjdAnohfhwkJI8gdQcaQylZi1QVEnbsyCYCRKo5575miywnHpj4dDyYxn
 bKaYgxFZI3zK7NxOvomCm0GI1C3/bm/10+rS8bqgIGGczRo8owWK0wkipgUgeEIK
 8UHIjSLsITXRCWuFSd9SemDY3kd1VobFRD1ujJmeBaovRjkkKjAzb4cBOjoWWJPW
 YSZvbX4qm6eBrYz/pbpQX5RBUuGE91tcjD3yNtrMw/+tvg9G41vGg9iuinMmwJKh
 3CqYpaNZPhl0QyJlyMjiAmfa/XEtuzhHS9Bly9ge7FzDfg7er5QqUSbmE3FxF6NZ
 gAS49OKObT6mDdz1L7xxJQKFBE3zT+Kvz+l7ZdtFZInhhH0pdHfjva32JvBp8aEr
 oJzJa5xzjtSLq18ZVlUpKkv73ClHGckuJUm41XN/xewuP5TcndKpzVDY/xpsl4lW
 AaI12HME//uCgn9NMZUUfiMXQPTXwGF4NFQBCB+lWnAnLbuFGNPG/2Ioeh2raKEA
 +ACwAvcxSW4PtVVbA8wCTqgL1B3GMllwQChtAqfA0twmf5MucoP0OMHRONU9TpDh
 WnpbmVvI9i+ZGF4wHxcgTicDIipuzlZsBsvHuGvVhNOXe374Iyksdz4AILPmLD3m
 7kZy0K5Ms9B2IUATiUdg
 =wZBx
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS
2014-01-26 11:00:41 -08:00
Linus Torvalds
09da8dfa98 ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
    device represented in the ACPI tables during all namespace scans regardless
    of the current status of that device.  In accordance with this, ACPI hotplug
    operations will not delete those objects, unless the underlying ACPI tables
    go away.
 
  - On top of the above, new sysfs attribute for ACPI device objects allowing
    user space to check device status by triggering the execution of _STA for
    its ACPI object.  From Srinivas Pandruvada.
 
  - ACPI core hotplug changes reducing code duplication, integrating the
    PCI root hotplug with the core and reworking container hotplug.
 
  - ACPI core simplifications making it use ACPI_COMPANION() in the code
    "glueing" ACPI device objects to "physical" devices.
 
  - ACPICA update to upstream version 20131218.  This adds support for the
    DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
    facilities.  From Bob Moore, Lv Zheng and Betty Dall.
 
  - Init code change to carry out the early ACPI initialization earlier.
    That should allow us to use ACPI during the timekeeping initialization
    and possibly to simplify the EFI initialization too.  From Chun-Yi Lee.
 
  - Clenups of the inclusions of ACPI headers in many places all over from
    Lv Zheng and Rashika Kheria (work in progress).
 
  - New helper for ACPI _DSM execution and rework of the code in drivers
    that uses _DSM to execute it via the new helper.  From Jiang Liu.
 
  - New Win8 OSI blacklist entries from Takashi Iwai.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
    Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
    Tang Chen, Zhang Rui.
 
  - intel_pstate driver updates, including proper Baytrail support, from
    Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
 
  - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
 
  - powernow-k6 cpufreq driver fixes from Mikulas Patocka.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
 
  - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
    Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
 
  - cpuidle cleanups from Bartlomiej Zolnierkiewicz.
 
  - Support for hibernation APM events from Bin Shi.
 
  - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
    during thaw transitions from Bjørn Mork.
 
  - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
 
  - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
    Rashika Kheria.
 
  - New tool for profiling system suspend from Todd E Brandt and a cpupower
    tool cleanup from One Thousand Gnomes.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJS3a1eAAoJEILEb/54YlRxnTgP/iGawvgjKWm6Qqp7WSIvd5gQ
 zZ6q75C6Pc/W2fq1+OzVGnpCF8WYFy+nFDAXOvUHjIXuoxSwFcuW5l4aMckgl/0a
 TXEWe9MJrCHHRfDApfFacCJ44U02bjJAD5vTyL/hKA+IHeinq4WCSojryYC+8jU0
 cBrUIV0aNH8r5JR2WJNAyv/U29rXsDUOu0I4qTqZ4YaZT6AignMjtLXn1e9AH1Pn
 DPZphTIo/HMnb+kgBOjt4snMk+ahVO9eCOxh/hH8ecnWExw9WynXoU5Nsna0tSZs
 ssyHC7BYexD3oYsG8D52cFUpp4FCsJ0nFQNa2kw0LY+0FBNay43LySisKYHZPXEs
 2WpESDv+/t7yhtnrvM+TtA7aBheKm2XMWGFSu/aERLE17jIidOkXKH5Y7ryYLNf/
 uyRKxNS0NcZWZ0G+/wuY02jQYNkfYz3k/nTr8BAUItRBjdporGIRNEnR9gPzgCUC
 uQhjXWMPulqubr8xbyefPWHTEzU2nvbXwTUWGjrBxSy8zkyy5arfqizUj+VG6afT
 NsboANoMHa9b+xdzigSFdA3nbVK6xBjtU6Ywntk9TIpODKF5NgfARx0H+oSH+Zrj
 32bMzgZtHw/lAbYsnQ9OnTY6AEWQYt6NMuVbTiLXrMHhM3nWwfg/XoN4nZqs6jPo
 IYvE6WhQZU6L6fptGHFC
 =dRf6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...
2014-01-24 15:51:02 -08:00
Linus Torvalds
0ba3307a8e ARM: driver updates for 3.14
Updates of SoC-near drivers and other driver updates that makes more sense to
 take through our tree.
 
 The largest part of this is a conversion of device registration for some
 renesas shmobile/sh devices over to use resources. This has required
 coordination with the corresponding arch/sh changes, and we've agreed
 to merge the arch/sh changes through our tree.
 
 Added in this branch is support for Trusted Foundations secure firmware,
 which is what is used on many of the commercial Nvidia Tegra products
 that are in the market, including the Nvidia Shield. The code is local
 to arch/arm at this time since it's uncertain whether it will be shared
 with arm64 longer-term, if needed we will refactor later.
 
 A couple of new RTC drivers used on ARM boards, merged through our tree
 on request by the RTC maintainer.
 
 ... plus a bunch of smaller updates across the board, gpio conversions
 for davinci, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4ViqAAoJEIwa5zzehBx3m4QP/07VXVE77RFRyly5Bky5AaMY
 zo7ZpoJyg/IT9lxtSAQDhbQq49tKZQVS16oJ7LWXzjAyCY9XrVDX2IkcuqudmYSy
 Xtx+R0jZGK4czqljgjwdHgNCSwugCmO/kgNY3h8ar53dTmGIFiq5boPeMDizRTGD
 g3sgYuQbIqepcHd2jUjJSBXNyvZIlwBJ4wDyZgxRfzyM7unS8T46BpYNJz0esAL+
 0DwIk0nv1eJ6LI0aEL+7bgFaitjUNLpcrroToi1IiIEJuTvZY4AuBjAKt5/181zL
 i1ugimsHahmbwNclAmUimc0rtW4Nn+YHGa8WpYiQ9O7+kPFsYkfLRplHPOjaUBPz
 r76ucgBMGH6i04tvstwlONznO4NhkACWmb4wrfJfRoDTglELLoOd6QGAYKyRublH
 SnrKKmuXzBvtmj2zgUU+S0ka9LdYrjzxoSYprrXQpDr89pUs/AZrlAm9yRjQ3hGw
 0eL9UsDFtYAQwCQtPvin2bjKRgNNDbgdwNYNbA7n8jvE/uZ4rlYr3Ot+oxdfs75e
 K4fY6JwtbZxQVcOU25M3WBYXLl0V61ZISFa16XhYC2hjzgMZ3bfmFUn+TW9C8V4V
 03QqtFyT3FP+VfA3QUS3PuBxALT0HWXmDqp0VJc6UCiXX2InWR+uZQp7a30EawOZ
 WHLqgf+nT3bD3kfagCZN
 =JJlw
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...
2014-01-23 18:49:36 -08:00
Linus Torvalds
f341535193 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "In this set, we have:
   - Refactoring of some of the old StrongARM-1100 GPIO code to make
     things simpler by Dmitry Eremin-Solenikov
   - Read-only and non-executable support for modules on ARM from Laura
     Abbot
   - Removal of unnecessary set_drvdata() calls in AMBA code
   - Some non-executable support for kernel lowmem mappings at the 1MB
     section granularity, and dumping of kernel page tables via debugfs
   - Some improvements for the timer/clock code on Footbridge platforms,
     and cleanup some of the LED code there
   - Fix fls/ffs() signatures to match x86 to prevent build warnings,
     particularly where these are used with min/max() macros
   - Avoid using the bootmem allocator on ARM (patches from Santosh
     Shilimkar)
   - Various asid/unaligned access updates from Will Deacon"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (51 commits)
  ARM: SMP implementations are not supposed to return from smp_ops.cpu_die()
  ARM: ignore memory below PHYS_OFFSET
  Fix select-induced Kconfig warning for ZBOOT_ROM
  ARM: fix ffs/fls implementations to match x86
  ARM: 7935/1: sa1100: collie: add gpio-keys configuration
  ARM: 7932/1: bcm: Add DEBUG_LL console support
  ARM: 7929/1: Remove duplicate SCHED_HRTICK config option
  ARM: 7928/1: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU
  ARM: 7927/1: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs
  ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator
  ARM: 7925/1: mm: keep track of last ASID allocation to improve bitmap searching
  ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE
  ARM: PCI: add legacy IDE IRQ implementation
  ARM: footbridge: cleanup LEDs code
  ARM: pgd allocation: retry on failure
  ARM: footbridge: add one-shot mode for DC21285 timer
  ARM: footbridge: add sched_clock implementation
  ARM: 7922/1: l2x0: add Marvell Tauros3 support
  ARM: 7877/1: use built-in byte swap function
  ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev
  ...
2014-01-23 18:34:03 -08:00
Adrian Hunter
945be38caa mmc: sdhci-pci: Fix possibility of chip->fixes being null
It is possible for chip->fixes to be null.  Check before dereferencing it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-23 10:52:53 -05:00
Adrian Hunter
77a0122e08 mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
A host controller for a SD card may need a GPIO for card detect in order
to wake up from runtime suspend when a card is inserted.  If that GPIO is
not configured, then the host controller will not wake up.  Fix that for
the affected devices by not enabling runtime PM unless the GPIO is
successfully set up.

This affects BYT sd card host controller which had runtime PM enabled from
v3.11.  For completeness, the MFD sd card host controller is flagged also.

The original patch before rebasing (see link below) was tested on v3.11.10
and v3.12.4 although the patch applied with some offsets and fuzz.  The
original patch is here:

    http://marc.info/?l=linux-mmc&m=138676702327057

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-20 10:31:08 -05:00
Adrian Hunter
3e1a689248 mmc: sdhci: Allow for long command timeouts
The driver has a timer with a 10 second timeout to catch devices that stop
responding.  However it is possible for commands to take even longer than
that.  Change the timer timeout to reflect the command timeout.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-20 09:54:40 -05:00
Bing Zhao
e5624054c1 mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
Polling SDIO_CCCR_INTx could create a fake interrupt with Marvell
SD8797 card. Add a quirk to handle this case. The fixup here is
to issue a dummy CMD52 read to function 0 register 0xff, and this
dummy read must be right after SDIO_CCCR_INTx is read.

Patch has been verified on a dw_mmc controller (Samsung Chromebook)
with MMC_CAP_SDIO_IRQ disabled.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Reviewed-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-17 22:55:01 -05:00
Aisheng Dong
2b35bd8346 mmc: sdhci: fix lockdep error in tuning routine
The sdhci_execute_tuning routine gets lock separately by
disable_irq(host->irq);
spin_lock(&host->lock);
It will cause the following lockdep error message since the &host->lock
could also be got in irq context.
Use spin_lock_irqsave/spin_unlock_restore instead to get rid of
this error message.

[ INFO: inconsistent lock state ]
3.13.0-rc1+ #287 Not tainted
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/u2:1/33 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&host->lock)->rlock){?.-...}, at: [<8045f7f4>] sdhci_execute_tuning+0x4c/0x710
{IN-HARDIRQ-W} state was registered at:
  [<8005f030>] mark_lock+0x140/0x6ac
  [<80060760>] __lock_acquire+0xb30/0x1cbc
  [<800620d0>] lock_acquire+0x70/0x84
  [<8061d1c8>] _raw_spin_lock+0x30/0x40
  [<804605cc>] sdhci_irq+0x24/0xa68
  [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
  [<8006b350>] handle_irq_event+0x44/0x64
  [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
  [<8006a8f0>] generic_handle_irq+0x30/0x44
  [<8000f238>] handle_IRQ+0x54/0xbc
  [<8000864c>] gic_handle_irq+0x30/0x64
  [<80013024>] __irq_svc+0x44/0x5c
  [<80329bf4>] dev_vprintk_emit+0x50/0x58
  [<80329c24>] dev_printk_emit+0x28/0x30
  [<80329fec>] __dev_printk+0x4c/0x90
  [<8032a180>] dev_err+0x3c/0x48
  [<802dd4f0>] _regulator_get+0x158/0x1cc
  [<802dd5b4>] regulator_get_optional+0x18/0x1c
  [<80461df4>] sdhci_add_host+0x42c/0xbd8
  [<80464820>] sdhci_esdhc_imx_probe+0x378/0x67c
  [<8032ee88>] platform_drv_probe+0x20/0x50
  [<8032d48c>] driver_probe_device+0x118/0x234
  [<8032d690>] __driver_attach+0x9c/0xa0
  [<8032b89c>] bus_for_each_dev+0x68/0x9c
  [<8032cf44>] driver_attach+0x20/0x28
  [<8032cbc8>] bus_add_driver+0x148/0x1f4
  [<8032dce0>] driver_register+0x80/0x100
  [<8032ee54>] __platform_driver_register+0x50/0x64
  [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611b28>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c
irq event stamp: 805
hardirqs last  enabled at (805): [<8061d43c>] _raw_spin_unlock_irqrestore+0x38/0x4c
hardirqs last disabled at (804): [<8061d2c8>] _raw_spin_lock_irqsave+0x24/0x54
softirqs last  enabled at (570): [<8002b824>] __do_softirq+0x1c4/0x290
softirqs last disabled at (561): [<8002bcf4>] irq_exit+0xb4/0x10c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&host->lock)->rlock);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

2 locks held by kworker/u2:1/33:
 #0:  (kmmcd){.+.+..}, at: [<8003db18>] process_one_work+0x128/0x468
 #1:  ((&(&host->detect)->work)){+.+...}, at: [<8003db18>] process_one_work+0x128/0x468

stack backtrace:
CPU: 0 PID: 33 Comm: kworker/u2:1 Not tainted 3.13.0-rc1+ #287
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
 r6:bfad0900 r5:00000000 r4:8088ecc8 r3:bfad0900
[<80012420>] (show_stack+0x0/0x1c) from [<806169ec>] (dump_stack+0x84/0x9c)
[<80616968>] (dump_stack+0x0/0x9c) from [<806147b4>] (print_usage_bug+0x260/0x2d0)
 r5:8076ba88 r4:80977410
[<80614554>] (print_usage_bug+0x0/0x2d0) from [<8005f0d0>] (mark_lock+0x1e0/0x6ac)
 r9:8005e678 r8:00000000 r7:bfad0900 r6:00001015 r5:bfad0cd0
r4:00000002
[<8005eef0>] (mark_lock+0x0/0x6ac) from [<80060234>] (__lock_acquire+0x604/0x1cbc)
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061d1c8>] (_raw_spin_lock+0x30/0x40)
 r7:00000000 r6:bfb63000 r5:00000000 r4:bfb60568
[<8061d198>] (_raw_spin_lock+0x0/0x40) from [<8045f7f4>] (sdhci_execute_tuning+0x4c/0x710)
 r4:bfb60000
[<8045f7a8>] (sdhci_execute_tuning+0x0/0x710) from [<80453454>] (mmc_sd_init_card+0x5f8/0x660)
[<80452e5c>] (mmc_sd_init_card+0x0/0x660) from [<80453748>] (mmc_attach_sd+0xb4/0x180)
 r9:bf92d400 r8:8065f364 r7:00061a80 r6:bfb60000 r5:8065f358
r4:bfb60000
[<80453694>] (mmc_attach_sd+0x0/0x180) from [<8044d9f8>] (mmc_rescan+0x284/0x2f0)
 r5:8065f358 r4:bfb602f8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
 r8:00000000 r7:bfb55eb0 r6:bf80dc00 r5:bfb602f8 r4:bfb35980
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:80044d0c r4:bfb37b40

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-17 22:39:18 -05:00
Zhangfei Gao
0e662440e9 mmc: dw_mmc: k3: remove clk_table
Remove clk_table and directly use ios->clock as clock source rate.
Abstract init clock rate and max clock limitation in clk.c

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-17 17:59:17 -05:00
Zhangfei Gao
7cf347bd20 mmc: dw_mmc: fix dw_mci_get_cd
bf626e5550 ("mmc: dw_mmc: use slot-gpio to handle cd pin") caused
CDETECT to be ignored, since negated return value of mmc_gpio_get_cd(mmc)
can not be checked by IS_ERR_VALUE.

Also, add spin_lock_bh(&host->lock) for atomic access to
DW_MMC_CARD_PRESENT, otherwise sd detect may occasionally fail.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-17 09:21:38 -05:00
Linus Walleij
364374121b ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
Previously the custom GPIO header for the S3C24xx would in turn
bring in the custom pin control implementation from
<plat/gpio-cfg.h>. This is not good as it mixes up two
subsystems and makes the dependencies hard to track. Make
the dependency explicit by explicitly including the pin
control header where needed.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:54 +01:00
Linus Walleij
b0161caa72 ARM: S3C[24|64]xx: move includes back under <mach/> scope
When refactoring and breaking out the includes for the
machine-specific GPIO configuration, two files were created
in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as
that namespace shall be used for defining data exchanged
between machines and drivers, using it for these broad macros
and config settings is wrong.

Move the headers back into the machine-local
<mach/gpio-samsung.h> file and think about the next step.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:06 +01:00
Wei Yongjun
85136b74dc mmc: dw_mmc: fix sparse non static symbol warning
Fixes the following sparse warning:

drivers/mmc/host/dw_mmc-k3.c:116:1: warning:
 symbol 'dw_mci_k3_pmops' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 21:06:14 -05:00
Dong Aisheng
a7f2be94be mmc: sdhci-esdhc-imx: fix warning during module remove function
Since the clock is managed by runtime pm currently, we do not need
disable it again during driver remove function, or it will cause
clock disable count mismatch issue since the clocks have already been disabled.

The issue can be simply reproduced by unbind the devices via sysfs.
mx6slevk:/sys/bus/platform/drivers/sdhci-esdhc-imx# echo 2194000.usdhc > unbind
mmc1: card aaaa removed
------------[ cut here ]------------
WARNING: CPU: 0 PID: 657 at drivers/clk/clk.c:842 __clk_disable+0x68/0x88()
Modules linked in:
CPU: 0 PID: 657 Comm: sh Not tainted 3.13.0-rc1+ #285
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
 r6:80481370 r5:00000000 r4:8088ecc8 r3:00000000
[<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c)
[<80616a90>] (dump_stack+0x0/0x9c) from [<80027158>] (warn_slowpath_common+0x70/0x94)
 r5:00000009 r4:00000000
[<800270e8>] (warn_slowpath_common+0x0/0x94) from [<80027220>] (warn_slowpath_null+0x24/0x2c)
 r8:bec4ff78 r7:0000000e r6:bf91d800 r5:bf81d080 r4:bf81d080
[<800271fc>] (warn_slowpath_null+0x0/0x2c) from [<80481370>] (__clk_disable+0x68/0x88)
[<80481308>] (__clk_disable+0x0/0x88) from [<8048148c>] (clk_disable+0x20/0x2c)
 r4:200f0113 r3:bf95ec00
[<8048146c>] (clk_disable+0x0/0x2c) from [<80463bd8>] (sdhci_esdhc_imx_remove+0x64/0xa4)
 r5:bf81d080 r4:bfabb010
[<80463b74>] (sdhci_esdhc_imx_remove+0x0/0xa4) from [<8032e82c>] (platform_drv_remove+0x20/0x24)
 r6:808ae0e0 r5:808ae0e0 r4:bf91d810 r3:80463b74
[<8032e80c>] (platform_drv_remove+0x0/0x24) from [<8032d010>] (__device_release_driver+0x78/0xd0)
[<8032cf98>] (__device_release_driver+0x0/0xd0) from [<8032d090>] (device_release_driver+0x28/0x34)
 r5:bf91d810 r4:bf91d844
[<8032d068>] (device_release_driver+0x0/0x34) from [<8032c0c8>] (unbind_store+0x80/0xc4)
 r5:bf91d810 r4:80899ba0
[<8032c048>] (unbind_store+0x0/0xc4) from [<8032b648>] (drv_attr_store+0x28/0x34)
 r7:bed73100 r6:0000000e r5:00000000 r4:8032b620
[<8032b620>] (drv_attr_store+0x0/0x34) from [<80140580>] (sysfs_write_file+0x1b0/0x1e4)
[<801403d0>] (sysfs_write_file+0x0/0x1e4) from [<800dcda0>] (vfs_write+0xb4/0x190)
[<800dccec>] (vfs_write+0x0/0x190) from [<800dd3e4>] (SyS_write+0x44/0x80)
 r9:0000000e r8:00000000 r7:01a00408 r6:bf3b1c00 r5:00000000
r4:00000000
[<800dd3a0>] (SyS_write+0x0/0x80) from [<8000e900>] (ret_fast_syscall+0x0/0x48)
 r9:bec4e000 r8:8000eac4 r7:00000004 r6:76f5fb40 r5:01a00408
r4:0000000e
---[ end trace a0897d268e6233b2 ]---

If without runtime pm, we just run as before to match the clock enable
in probe function.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 14:02:39 -05:00
Dong Aisheng
a974862fae mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
Sometimes we may meet the following lockdep issue.
The root cause is .set_clock callback is executed with spin_lock_irqsave
in sdhci_do_set_ios. However, the IMX set_clock callback will try to access
clk_get_rate which is using a mutex lock.

The fix avoids access mutex in .set_clock callback by initializing the
pltfm_host->clock at probe time and use it later instead of calling
clk_get_rate again in atomic context.

[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.13.0-rc1+ #285 Not tainted
------------------------------------------------------
kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4

and this task is already holding:
 (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720
which would create a new lock dependency:
 (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&host->lock)->rlock#2){-.-...}
... which became HARDIRQ-irq-safe at:
  [<8005f030>] mark_lock+0x140/0x6ac
  [<80060760>] __lock_acquire+0xb30/0x1cbc
  [<800620d0>] lock_acquire+0x70/0x84
  [<8061d2f0>] _raw_spin_lock+0x30/0x40
  [<80460668>] sdhci_irq+0x24/0xa68
  [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
  [<8006b350>] handle_irq_event+0x44/0x64
  [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
  [<8006a8f0>] generic_handle_irq+0x30/0x44
  [<8000f238>] handle_IRQ+0x54/0xbc
  [<8000864c>] gic_handle_irq+0x30/0x64
  [<80013024>] __irq_svc+0x44/0x5c
  [<80614c58>] printk+0x38/0x40
  [<804622a8>] sdhci_add_host+0x844/0xbcc
  [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
  [<8032ee88>] platform_drv_probe+0x20/0x50
  [<8032d48c>] driver_probe_device+0x118/0x234
  [<8032d690>] __driver_attach+0x9c/0xa0
  [<8032b89c>] bus_for_each_dev+0x68/0x9c
  [<8032cf44>] driver_attach+0x20/0x28
  [<8032cbc8>] bus_add_driver+0x148/0x1f4
  [<8032dce0>] driver_register+0x80/0x100
  [<8032ee54>] __platform_driver_register+0x50/0x64
  [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611c50>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c

to a HARDIRQ-irq-unsafe lock:
 (prepare_lock){+.+...}
... which became HARDIRQ-irq-unsafe at:
...  [<8005f030>] mark_lock+0x140/0x6ac
  [<8005f604>] mark_held_locks+0x68/0x12c
  [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
  [<8005f8b4>] trace_hardirqs_on+0x14/0x18
  [<8061a130>] mutex_trylock+0x180/0x20c
  [<80480ad8>] clk_prepare_lock+0x14/0xe4
  [<804816a4>] clk_notifier_register+0x28/0xf0
  [<80015120>] twd_clk_init+0x50/0x68
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611c50>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(prepare_lock);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock#2);
                               lock(prepare_lock);
  <Interrupt>
    lock(&(&host->lock)->rlock#2);

 *** DEADLOCK ***

3 locks held by kworker/u8:1/29:
 #0:  (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468
 #1:  ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468
 #2:  (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&host->lock)->rlock#2){-.-...} ops: 330 {
   IN-HARDIRQ-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<80060760>] __lock_acquire+0xb30/0x1cbc
                    [<800620d0>] lock_acquire+0x70/0x84
                    [<8061d2f0>] _raw_spin_lock+0x30/0x40
                    [<80460668>] sdhci_irq+0x24/0xa68
                    [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
                    [<8006b350>] handle_irq_event+0x44/0x64
                    [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
                    [<8006a8f0>] generic_handle_irq+0x30/0x44
                    [<8000f238>] handle_IRQ+0x54/0xbc
                    [<8000864c>] gic_handle_irq+0x30/0x64
                    [<80013024>] __irq_svc+0x44/0x5c
                    [<80614c58>] printk+0x38/0x40
                    [<804622a8>] sdhci_add_host+0x844/0xbcc
                    [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                    [<8032ee88>] platform_drv_probe+0x20/0x50
                    [<8032d48c>] driver_probe_device+0x118/0x234
                    [<8032d690>] __driver_attach+0x9c/0xa0
                    [<8032b89c>] bus_for_each_dev+0x68/0x9c
                    [<8032cf44>] driver_attach+0x20/0x28
                    [<8032cbc8>] bus_add_driver+0x148/0x1f4
                    [<8032dce0>] driver_register+0x80/0x100
                    [<8032ee54>] __platform_driver_register+0x50/0x64
                    [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   IN-SOFTIRQ-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<80060204>] __lock_acquire+0x5d4/0x1cbc
                    [<800620d0>] lock_acquire+0x70/0x84
                    [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
                    [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120
                    [<8002b538>] tasklet_action+0xa0/0x15c
                    [<8002b778>] __do_softirq+0x118/0x290
                    [<8002bcf4>] irq_exit+0xb4/0x10c
                    [<8000f240>] handle_IRQ+0x5c/0xbc
                    [<8000864c>] gic_handle_irq+0x30/0x64
                    [<80013024>] __irq_svc+0x44/0x5c
                    [<80614c58>] printk+0x38/0x40
                    [<804622a8>] sdhci_add_host+0x844/0xbcc
                    [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                    [<8032ee88>] platform_drv_probe+0x20/0x50
                    [<8032d48c>] driver_probe_device+0x118/0x234
                    [<8032d690>] __driver_attach+0x9c/0xa0
                    [<8032b89c>] bus_for_each_dev+0x68/0x9c
                    [<8032cf44>] driver_attach+0x20/0x28
                    [<8032cbc8>] bus_add_driver+0x148/0x1f4
                    [<8032dce0>] driver_register+0x80/0x100
                    [<8032ee54>] __platform_driver_register+0x50/0x64
                    [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f030>] mark_lock+0x140/0x6ac
                   [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
                   [<800620d0>] lock_acquire+0x70/0x84
                   [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
                   [<804611f4>] sdhci_do_set_ios+0x20/0x720
                   [<80461924>] sdhci_set_ios+0x30/0x3c
                   [<8044cea0>] mmc_power_up+0x6c/0xd0
                   [<8044dac4>] mmc_start_host+0x60/0x70
                   [<8044eb3c>] mmc_add_host+0x60/0x88
                   [<8046225c>] sdhci_add_host+0x7f8/0xbcc
                   [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                   [<8032ee88>] platform_drv_probe+0x20/0x50
                   [<8032d48c>] driver_probe_device+0x118/0x234
                   [<8032d690>] __driver_attach+0x9c/0xa0
                   [<8032b89c>] bus_for_each_dev+0x68/0x9c
                   [<8032cf44>] driver_attach+0x20/0x28
                   [<8032cbc8>] bus_add_driver+0x148/0x1f4
                   [<8032dce0>] driver_register+0x80/0x100
                   [<8032ee54>] __platform_driver_register+0x50/0x64
                   [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                   [<80008980>] do_one_initcall+0x108/0x16c
                   [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                   [<80611c50>] kernel_init+0x10/0x120
                   [<8000e9c8>] ret_from_fork+0x14/0x2c
 }
 ... key      at: [<80e040e8>] __key.26952+0x0/0x8
 ... acquired at:
   [<8005eb60>] check_usage+0x3d0/0x5c0
   [<8005edac>] check_irq_usage+0x5c/0xb8
   [<80060d38>] __lock_acquire+0x1108/0x1cbc
   [<800620d0>] lock_acquire+0x70/0x84
   [<8061a210>] mutex_lock_nested+0x54/0x3c0
   [<80480b08>] clk_prepare_lock+0x44/0xe4
   [<8048188c>] clk_get_rate+0x14/0x64
   [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
   [<8045d70c>] sdhci_set_clock+0x4c/0x498
   [<80461518>] sdhci_do_set_ios+0x344/0x720
   [<80461924>] sdhci_set_ios+0x30/0x3c
   [<8044c390>] __mmc_set_clock+0x44/0x60
   [<8044cd4c>] mmc_set_clock+0x10/0x14
   [<8044f8f4>] mmc_init_card+0x1b4/0x1520
   [<80450f00>] mmc_attach_mmc+0xb4/0x194
   [<8044da08>] mmc_rescan+0x294/0x2f0
   [<8003db94>] process_one_work+0x1a4/0x468
   [<8003e850>] worker_thread+0x118/0x3e0
   [<80044de0>] kthread+0xd4/0xf0
   [<8000e9c8>] ret_from_fork+0x14/0x2c

the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock:
-> (prepare_lock){+.+...} ops: 395 {
   HARDIRQ-ON-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<8005f604>] mark_held_locks+0x68/0x12c
                    [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
                    [<8005f8b4>] trace_hardirqs_on+0x14/0x18
                    [<8061a130>] mutex_trylock+0x180/0x20c
                    [<80480ad8>] clk_prepare_lock+0x14/0xe4
                    [<804816a4>] clk_notifier_register+0x28/0xf0
                    [<80015120>] twd_clk_init+0x50/0x68
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   SOFTIRQ-ON-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<8005f604>] mark_held_locks+0x68/0x12c
                    [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8
                    [<8005f8b4>] trace_hardirqs_on+0x14/0x18
                    [<8061a130>] mutex_trylock+0x180/0x20c
                    [<80480ad8>] clk_prepare_lock+0x14/0xe4
                    [<804816a4>] clk_notifier_register+0x28/0xf0
                    [<80015120>] twd_clk_init+0x50/0x68
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f030>] mark_lock+0x140/0x6ac
                   [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
                   [<800620d0>] lock_acquire+0x70/0x84
                   [<8061a0c8>] mutex_trylock+0x118/0x20c
                   [<80480ad8>] clk_prepare_lock+0x14/0xe4
                   [<80482af8>] __clk_init+0x1c/0x45c
                   [<8048306c>] _clk_register+0xd0/0x170
                   [<80483148>] clk_register+0x3c/0x7c
                   [<80483b4c>] clk_register_fixed_rate+0x88/0xd8
                   [<80483c04>] of_fixed_clk_setup+0x68/0x94
                   [<8084c6fc>] of_clk_init+0x44/0x68
                   [<808202b0>] time_init+0x2c/0x38
                   [<8081ca14>] start_kernel+0x1e4/0x368
                   [<10008074>] 0x10008074
 }
 ... key      at: [<808afebc>] prepare_lock+0x38/0x48
 ... acquired at:
   [<8005eb94>] check_usage+0x404/0x5c0
   [<8005edac>] check_irq_usage+0x5c/0xb8
   [<80060d38>] __lock_acquire+0x1108/0x1cbc
   [<800620d0>] lock_acquire+0x70/0x84
   [<8061a210>] mutex_lock_nested+0x54/0x3c0
   [<80480b08>] clk_prepare_lock+0x44/0xe4
   [<8048188c>] clk_get_rate+0x14/0x64
   [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
   [<8045d70c>] sdhci_set_clock+0x4c/0x498
   [<80461518>] sdhci_do_set_ios+0x344/0x720
   [<80461924>] sdhci_set_ios+0x30/0x3c
   [<8044c390>] __mmc_set_clock+0x44/0x60
   [<8044cd4c>] mmc_set_clock+0x10/0x14
   [<8044f8f4>] mmc_init_card+0x1b4/0x1520
   [<80450f00>] mmc_attach_mmc+0xb4/0x194
   [<8044da08>] mmc_rescan+0x294/0x2f0
   [<8003db94>] process_one_work+0x1a4/0x468
   [<8003e850>] worker_thread+0x118/0x3e0
   [<80044de0>] kthread+0xd4/0xf0
   [<8000e9c8>] ret_from_fork+0x14/0x2c

stack backtrace:
CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200
[<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c)
[<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0)
 r5:80979940 r4:bfa29b44
[<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8)
[<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc)
 r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0)
 r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08
[<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4)
[<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64)
 r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128
[<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4)
 r5:bf0e9aa8 r4:bf0e9c40
[<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498)
[<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720)
 r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40
r3:00000000
[<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c)
 r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8
r4:bf0e9800
[<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60)
 r5:03197500 r4:bf0e9800
[<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14)
 r5:00000000 r4:bf0e9800
[<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520)
[<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194)
[<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0)
 r5:8065f358 r4:bf0e9af8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
 r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00

Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Philippe De Muyter <phdm@macqel.be>
Cc: stable <stable@vger.kernel.org> # 3.13
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 14:02:38 -05:00
Wolfram Sang
9288cac054 mmc: core: sd: implement proper support for sd3.0 au sizes
This reverts and updates commit 77776fd0a4 ("mmc: sd: fix the
maximum au_size for SD3.0"). The au_size for SD3.0 cannot be achieved
by a simple bit shift, so this needs to be implemented differently.
Also, don't print the warning in case of 0 since 'not defined' is
different from 'invalid'.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: stable <stable@vger.kernel.org> # [3.12, 3.13]
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 14:02:35 -05:00
Alexandre Belloni
9e7861f500 mmc: atmel-mci: add vmmc-supply support
Other MMC hosts handle a regulator named vmmc-supply that allows to power
the MMC card or SDIO device before communicating on the bus.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 13:03:40 -05:00
David Cohen
390145f9ad mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
Due to unknown hw issue so far, Merrifield is unable to enable HS200
support. This patch adds quirk to avoid SDHCI to initialize with error
below:

[   53.850132] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
3.12.0-rc6-00037-g3d7c8d9-dirty #36
[   53.850150] Hardware name: Intel Corporation Merrifield/SALT BAY,
BIOS 397 2013.09.12:11.51.40
[   53.850167]  00000000 00000000 ee409e48 c18816d2 00000000 ee409e78
c123e254 c1acc9b0
[   53.850227]  00000000 00000000 c1b14148 000003de c16c03bf c16c03bf
ee75b480 ed97c54c
[   53.850282]  ee75b480 ee409e88 c123e292 00000009 00000000 ee409ef8
c16c03bf c1207fac
[   53.850339] Call Trace:
[   53.850376]  [<c18816d2>] dump_stack+0x4b/0x79
[   53.850408]  [<c123e254>] warn_slowpath_common+0x84/0xa0
[   53.850436]  [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50
[   53.850462]  [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50
[   53.850490]  [<c123e292>] warn_slowpath_null+0x22/0x30
[   53.850516]  [<c16c03bf>] sdhci_send_command+0xb4f/0xc50
[   53.850545]  [<c1207fac>] ? native_sched_clock+0x2c/0xb0
[   53.850575]  [<c14c1f93>] ? delay_tsc+0x73/0xb0
[   53.850601]  [<c14c1ebe>] ? __const_udelay+0x1e/0x20
[   53.850626]  [<c16bdeb3>] ? sdhci_reset+0x93/0x190
[   53.850654]  [<c16c05b0>] sdhci_finish_data+0xf0/0x2e0
[   53.850683]  [<c16c130f>] sdhci_irq+0x31f/0x930
[   53.850713]  [<c12cb080>] ? __buffer_unlock_commit+0x10/0x20
[   53.850740]  [<c12cbcd7>] ? trace_buffer_unlock_commit+0x37/0x50
[   53.850773]  [<c1288f3c>] handle_irq_event_percpu+0x5c/0x220
[   53.850800]  [<c128bc96>] ? handle_fasteoi_irq+0x16/0xd0
[   53.850827]  [<c128913a>] handle_irq_event+0x3a/0x60
[   53.850852]  [<c128bc80>] ? unmask_irq+0x30/0x30
[   53.850878]  [<c128bcce>] handle_fasteoi_irq+0x4e/0xd0
[   53.850895]  <IRQ>  [<c1890b52>] ? do_IRQ+0x42/0xb0
[   53.850943]  [<c1890a31>] ? common_interrupt+0x31/0x38
[   53.850973]  [<c12b00d8>] ? cgroup_mkdir+0x4e8/0x580
[   53.851001]  [<c1208d32>] ? default_idle+0x22/0xf0
[   53.851029]  [<c1209576>] ? arch_cpu_idle+0x26/0x30
[   53.851054]  [<c1288505>] ? cpu_startup_entry+0x65/0x240
[   53.851082]  [<c18793d5>] ? rest_init+0xb5/0xc0
[   53.851108]  [<c1879320>] ? __read_lock_failed+0x18/0x18
[   53.851138]  [<c1bf6a15>] ? start_kernel+0x31b/0x321
[   53.851164]  [<c1bf652f>] ? repair_env_string+0x51/0x51
[   53.851190]  [<c1bf6363>] ? i386_start_kernel+0x139/0x13c
[   53.851209] ---[ end trace 92777f5fe48d33f2 ]---
[   53.853449] mmcblk0: error -84 transferring data, sector 11142162, nr
304, cmd response 0x0, card status 0x0
[   53.853476] mmcblk0: retrying using single block read
[   55.937863] sdhci: Timeout waiting for Buffer Read Ready interrupt
during tuning procedure, falling back to fixed sampling clock
[   56.207951] sdhci: Timeout waiting for Buffer Read Ready interrupt
during tuning procedure, falling back to fixed sampling clock
[   66.228785] mmc0: Timeout waiting for hardware interrupt.
[   66.230855] ------------[ cut here ]------------

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Acked-by: Dong Aisheng <b29396@freescale.com>
Cc: stable <stable@vger.kernel.org> # [3.13]
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 13:03:25 -05:00
David Cohen
13868bf20f mmc: sdhci: add quirk for broken HS200 support
This patch defines a quirk for platforms unable to enable HS200 support.

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Acked-by: Dong Aisheng <b29396@freescale.com>
Cc: stable <stable@vger.kernel.org> # [3.13]
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 13:03:18 -05:00
Soren Brinkmann
e3ec3a3d11 mmc: arasan: Add driver for Arasan SDHCI
Add a driver for Arasan's SDHCI controller core.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Rob Herring <rob.herring@calxeda.com> [binding]
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:34 -05:00
Zhangfei Gao
036f29d554 mmc: dw_mmc: add dw_mmc-k3 for k3 platform
Add dw_mmc-k3.c for k3v2, support sd/emmc

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhigang Wang <brooke.wangzhigang@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:33 -05:00
Zhangfei Gao
bf626e5550 mmc: dw_mmc: use slot-gpio to handle cd pin
Suggested by Jaehoon: Use slot-gpio to handle cd-gpio
Add function dw_mci_of_get_cd_gpio to check "cd-gpios" from dts.
mmc_gpio_request_cd and mmc_gpio_get_cd are used to handle cd pin

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:32 -05:00
Adam Lee
01acf6917a mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
Add O2Micro/BayHubTech SD Host DeviceId 8520 support.
Add O2Micro/BayHubTech SD Host DeviceId 8420 & 8421 support.
Add O2Micro/BayHubTech SD Host DeviceId 8620 & 8621 support.

These card readers are used in laptops like Lenovo ThinkPad W540,
Dell Latitude E5440, Dell Latitude E6540.

Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:32 -05:00
Adam Lee
522624f97e mmc: sdhci-pci: break out definitions to header file
Break out definitions in sdhci-pci.c to sdhci-pci.h, for introducing
module files like sdhci-pci-xxx.c

Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:31 -05:00
Kuninori Morimoto
1e0bf16cae mmc: tmio: fixup compile error
This patch fixes the below compile error:

${LINUX}/drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_probe':
${LINUX}/drivers/mmc/host/tmio_mmc.c:93:35: \
	error: 'res_ctl' undeclared (first use in this function)
${LINUX}/drivers/mmc/host/tmio_mmc.c:93:35: \
	note: each undeclared identifier is reported only \
	once for each function it appears in

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Chris Ball <chris@printf.net>
2014-01-13 12:48:30 -05:00
Laurent Pinchart
9ccb0bd0f1 mmc: sh_mmcif: Enable driver compilation with COMPILE_TEST
This helps increasing build testing coverage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:29 -05:00
Laurent Pinchart
ff0fa48f81 mmc: sdhi: Enable driver compilation with COMPILE_TEST
This helps increasing build testing coverage.

The driver doesn't compile on (at least) x86 due (possibly among others)
to missing readsw/writesw I/O accessors, restrict compilation to SUPERH
or ARM.

Whether the CTL_DMA_ENABLE register is part of the standard TMIO
controller or is Renesas-specific is unknown and impossible to test as
we have no current or planned TMIO DMA users other than SUPERH and
ARCH_SHMOBILE. Writing to the register is thus conditionally compiled
for SUPERH and ARCH_SHMOBILE only. Adding ARCH_SHMOBILE_MULTI to the
list would extend this to multiarch kernels, but would break the driver
for non-shmobile platforms if the register is Renesas-specific. We can
thus get rid of the conditional compilation completely without
introducing any further issue, and let future non-Renesas users deal
with the situation if it turns out to be a the problem.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:28 -05:00
Stephen Warren
67debea344 mmc: tegra: add support for Tegra124
Tegra124's MMC controller is very similar to earlier SoC generations,
and can be supported by the same driver.

However, there are some non-backwards-compatible HW differences, and
hence a new DT compatible value must be used to describe the HW. This
patch updates the driver to support that new compatible value.

That said, the HW differences are only relevant when enabling certain
high-performance transfer modes. Since the driver is currently very
simple and doesn't enable those modes, we don't actually need to address
any of these HW differences in the code yet, hence the simple nature of
this patch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:27 -05:00
Laurent Pinchart
538f4696bb mmc: sh_mmcif: Fix compilation warning on 64-bit platforms
Casting an integer to a void * generates a "cast to pointer from integer
of different size" warning. Cast the integer to an unsigned long first
to fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:26 -05:00
Laurent Pinchart
e5a233cb64 mmc: sh_mmcif: Factorize DMA channel request and configuration code
The channel request and configuration code is duplicated for the rx and
tx channels. Create a function that requests a single channel and call
it twice instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:25 -05:00
Kuninori Morimoto
e3c418f1b2 mmc: SDHI: add SoC specific workaround via HW version
One of Renesas SDHI chip needs workaround to use it, and, we can judge
it based on chip version.  This patch adds very quick-hack workaround
method, since we still don't know how many chips need workaround in
the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:24 -05:00
Kuninori Morimoto
5d60e50054 mmc: tmio: add new TMIO_MMC_HAVE_HIGH_REG flags
The accessibility checking method to the higher register was added by
69d1fe18e9 (mmc: tmio: only access registers above 0xff, if available)
But, it doesn't care 32bit register.  It is impossible to calculate it
from the resource size, since there is 16/32 bit register IP (e.g. VERSION
is located on 0xe2 if 16bit register, but it is located on 0x1c4 if 32bit
register).

This patch adds new TMIO_MMC_HAVE_HIGH_REG flags, tmio_mmc driver has it,
and sh_mobile_sdhi doesn't have it today.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:24 -05:00
Kuninori Morimoto
3b159a6e95 mmc: tmio: bus_shift become tmio_mmc_data member
.bus_shift is used to 16/32bit register access offset calculation on
tmio driver.  tmio_mmc_xxx is used from Toshiba/Renesas now, but this
bus_shift value depends on HW IP.  This patch moves .bus_shift to
tmio_mmc_data member and sets it on each driver.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:23 -05:00
Kuninori Morimoto
05fae4a755 mmc: tmio: use -EPROBE_DEFER if driver can't find regulator
Current tmio driver tries to use default ocr_avail if 1) it couldn't
find regulator and 2) if platform data doesn't have ocr_mask.
But, there is no guarantee that regulator driver probe is faster than
TMIO driver probe.  TMIO driver will not use regulator in such case.

By this patch, TMIO driver returns -EPROBE_DEFER if it couldn't find
regulator and if platform doesn't have ocr_mask.  Because, there is a
possibility that regulator has not been probed, but the user expects it.

This patch changes tmio_mmc_host_probe() behavior, but there is no user
who has conflict.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:22 -05:00
Sascha Hauer
d1a1dfb2f5 mmc: mxs: use mmc_of_parse to parse devicetree properties
Use generic helper function. This also adds support for the cd-gpios and
max-frequency devicetree properties.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:21 -05:00
Sascha Hauer
abd37cccd4 mmc: mxs: use mmc_gpio_get_ro for detecting read-only status
This also fixes that the read-only gpio was used without being
requested.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:20 -05:00
Sascha Hauer
6c3331d3ac mmc: mxs: use standard flag for cd inverted
We have a MMC_CAP2_CD_ACTIVE_HIGH flag, so use it rather than a custom
driver specific flag.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:19 -05:00
Sascha Hauer
a91fe279ae mmc: mxs: use standard flag for broken card detection
Use the standard MMC_CAP_NEEDS_POLL flag rather than a custom broken_cd
flag. The original code used to just return true in the card detection
function for broken card detection. The MMC_CAP_NEEDS_POLL works different,
but was introduced for the same purpose, so assume the code works correct
now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:19 -05:00
Sascha Hauer
c5f4bc841c mmc: mxs: use standard flag for non-removable status
The standard caps already have a MMC_CAP_NONREMOVABLE flag. Use it
rather than a custom non_removable flag.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:18 -05:00
Sascha Hauer
c1b55bfcb3 mmc: Do not call get_cd for non removable cards
Non removable cards are always present, so do not call get_cd for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:17 -05:00
Mika Westerberg
07c001c119 mmc: sdhci-acpi: add new ACPI ID
Newer Intel PCHs with LPSS have the same SDHCI controller than Haswell but
ACPI ID is different. Add this ID to the driver list.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:16 -05:00
Laurent Pinchart
00fb3d2a19 mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:15 -05:00
Fabio Estevam
a50145f925 mmc: sdhci-esdhc-imx: Use NULL instead of zero
Fix the following sparse warning:

drivers/mmc/host/sdhci-esdhc-imx.c:617:35: warning: Using plain integer as NULL pointer

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:14 -05:00
Chuansheng Liu
63c211803a mmc: sdhci: Setting the host->mrq to NULL before executing tuning
In function sdhci_request(), it is possible to do the tuning execution
like below:

sdhci_request() {
	spin_lock_irqsave(&host->lock, flags);
	host->mrq = mrq;
	...
	spin_unlock_irqrestore(&host->lock, flags);

<=== Here it is possible one pending finish_tasklet get running
     and it will operate the original mrq, and notified the mrq
     is done, and causes memory corruption.

	sdhci_execute_tuning(mmc, tuning_opcode);
	spin_lock_irqsave(&host->lock, flags);
	host->mrq = mrq;
...
}

In the above race place, the original mrq should not be finished wrongly,
so here before unlock the spinlock, we need to set the host->mrq to NULL
to avoid this case.

Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:13 -05:00
Ludovic Desroches
66b512eda7 mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA
With some SDIO devices, timeout errors can happen when reading data.
To solve this issue, the DMA transfer has to be activated before sending
the command to the device. This order is incorrect in PDC mode. So we
have to take care if we are using DMA or PDC to know when to send the
MMC command.

Cc: stable <stable@vger.kernel.org> # 3.2+
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:12 -05:00
Kuninori Morimoto
dd006b3081 mmc: tmio: don't overwrite caps2
02cb3221d5 ("mmc: tmio: support caps2 flags") added caps2 support on
tmio, but it overwrites mmc_of_parse() settings.  This patch fixes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:11 -05:00
Ray Jui
f662ae48ae mmc: fix host release issue after discard operation
Under function mmc_blk_issue_rq, after an MMC discard operation,
the MMC request data structure may be freed in memory. Later in
the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK
is dangerous and invalid. It causes the MMC host not to be released
when it should.

This patch fixes the issue by marking the special request down before
the discard/flush operation.

Reported by: Harold (SoonYeal) Yang <haroldsy@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:10 -05:00
Dong Aisheng
89d7e5c131 mmc: sdhci-esdhc-imx: add runtime pm support
The root clock will be disabled in runtime pm to save power.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:09 -05:00
Dong Aisheng
ce090a4eb9 mmc: sdhci-esdhc-imx: fix runtime pm unbalance issue
Since we're using common esdhc_send_command for tuning commands and
the core code will call pm_runtime_put after command is finished.
So we add a pm_runtime_get_sync here to get the balance.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2014-01-13 12:48:09 -05:00