Changed all the comments to conform to the standard, aligned register values.
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch should allow the driver to consume a lot less power.
Signed-off-by: david woo <xinhua_wu@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
dot11d.h needed a good refactoring - I've dropped some of the //
comments or transformed them to match the kernel documentation.
r8180_93cx6.h - fixed a little bit the copyright section.
Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So that the configuration hierarchy is correct, set the debug option
to have the same base as the main BATMAN option.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bug found and fixed in origional version by Linus Luessing.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It does not matter if the interface is to be activated or not, we must
read the packet in order that it be discarded.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Without this change we spam the kernel log on every packet received on
any other interface when an interface has been added, but is not yet
active, ie UP.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Break up a lot of the big functions up into many smaller ones. This
helps with readability and there is now a lot less code squashed
against the right hand margin.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv used its own logging infrastructure. Replace this with
standard kernel logging, printk(), with compile time and runtime
options to enable/disable different debug levels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This almost trivial patch replaces the hardcoded values for the vendor and
device ids with defines, as they are used in drivers/hid/hid-ids.h
For me this seems to be more consistent, however as drivers/hid/hid-ids.h
is not within the default include directory I had to redefine the defines here
(maybe move the hid-ids.h to include/linux ?)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rearrange code and cleanup the information to get rid of checkpatch.pl
line > 80 chars complaints.
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uncompiled. Doesn't currently build anyway.
Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use pci_set_consistent_dma_mask() in the case of 64-bit consistent allocations.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE_TABLE: defines array as const and puts
it into the __devinitconst section.
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need to check pointer expicitly since it has been done in debugfs_remove()
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Unable to build both drivers at the same time due to classing variables that should be declared static but aren't.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Functionality for master RMW and location monitors has been implemented.
Remove the commented out structures from the original codebase.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the ca91c142 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the tsi148 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Markus Kraemer <mkraemer@e18.physik.tu-muenchen.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
*apdbg.c: use NULL pointer instead of 0 interger. Also make two functions private.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
cppcheck found that ctrl_pmsm is leaked if the open operation fails.
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add missing files/includes neccessary for Dream compilation. Mark
flash support as broken -- it is not present on released Dream, anyway.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
cleanup printk() warnings for including the facility level.
cleanup add a printk("\n") to terminate the print for the non-error case.
Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
