Commit Graph

8 Commits

Author SHA1 Message Date
Guenter Roeck
313829ee3c hwmon: (sch56xx-common) Fix build warnings
Fix:
warning: 'address' may be used uninitialized in this function
warning: 'name' may be used uninitialized in this function

While those are false warnings, the patch reduces module size on x86_64 by
approximately 110 bytes, so it is still worth the effort.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2012-09-23 21:08:29 -07:00
Dan Carpenter
bb644913a7 watchdog: sch56xx-common: set correct bits in register()
WDOG_NO_WAY_OUT (3) and WDOG_ACTIVE (0) are the bit numbers, not a mask.
So "data->wddev.status |= WDOG_ACTIVE;" was intended to set bit zero but
it is a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:56:17 +02:00
Hans de Goede
54e2dc9341 watchdog: sch56xx-common: Add proper ref-counting of watchdog data
This fixes referencing free-ed memory in the corner case where /dev/watchdog
is open when the platform driver gets unbound from the platform device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:55:46 +02:00
Hans de Goede
85a2e40cb5 watchdog: sch56xx: Remove unnecessary checks for register changes
Since the watchdog core keeps track of the watchdog's active state, start/stop
will never get called when no changes are necessary. So we can remove the
check for the output_enable register changing before writing it (which is
an expensive operation).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:55:41 +02:00
Hans de Goede
fb551405c0 watchdog: sch56xx: Use watchdog core
Convert sch56xx drivers to the generic watchdog core.

Note this patch depends on the "watchdog: Add multiple device support" patch
from Alan Cox.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-30 07:55:38 +02:00
Hans de Goede
312869ec93 hwmon: (sch56xx) Add support for the integrated watchdog (v2)
Add support for the watchdog integrated into the SMSC SCH5627 and
SCH5636 superio-s. Since the watchdog is part of the hwmon logical device
and thus shares ioports with it, the watchdog driver is integrated into the
existing hwmon drivers for these.

Note that this version of the watchdog support for sch56xx superio-s
implements the watchdog chardev interface itself, rather then relying on
the recently added watchdog core / watchdog_dev. This is done because
currently some needed functionality is missing from watchdog_dev, as soon
as this functionality is added (which is being discussed on the
linux-watchdog mailinglist), I'll convert this driver over to using
watchdog_dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[guenter.roeck@ericsson.com: Added missing linux/slab.h include]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-20 06:42:05 -07:00
Hans de Goede
0772a64079 hwmon: New driver sch5636
This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own
custom hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636
based hwmon solution. The sch5636 driver runs a sanity check on
loading to ensure it is dealing with a Fujitsu Theseus and not with
another custom SCH5636 based hwmon solution.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:09 +02:00
Hans de Goede
28ff2f7a74 hwmon: (sch5627) Factor out some code shared with sch5636 driver
This patch adds a new sch56xx-common.ko which contains code which will also
be used in the new sch5636 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:09 +02:00