Commit Graph

67 Commits

Author SHA1 Message Date
Tony Lindgren
41eb2d813f ARM: OMAP2: Fix H4 matrix keyboard warning
Convert to use matrix keyboard to remove the warning
"Please update the board to use matrix-keypad driver".

Based on similar setup in palmtc.c. Note that this
patch is compile tested only because of lack of working
hardware.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04 18:07:21 -07:00
Arnd Bergmann
3e965b1763 Merge branch 'next/fixes' into next/cleanup
Conflicts:
	arch/arm/mach-mxs/include/mach/gpio.h
	arch/arm/plat-mxc/include/mach/gpio.h
	drivers/video/omap/lcd_apollon.c
	drivers/video/omap/lcd_ldp.c
	drivers/video/omap/lcd_overo.c
2011-10-31 23:25:41 +01:00
Arnd Bergmann
034ee29912 Merge branch 'depends/omap2_dss' into next/cleanup
Omap cleanups conflicted with omap2_dss work in a nontrivial
way, this is the most logical fixup.

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-apollon.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-rx51.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 23:17:39 +01:00
Arnd Bergmann
5839fec9d8 Merge branch 'depends/rmk/memory_h' into next/fixes
Fix up all conflicts between the memory.h cleanup and bug fixes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 23:11:53 +01:00
Arnd Bergmann
71f2c15375 Merge branch 'depends/rmk/devel-stable' into next/cleanup 2011-10-08 21:07:42 +02:00
Tomi Valkeinen
cbf1455bfc OMAP: H4: Port the display driver to new DSS2
Port the old omapfb panel driver to DSS2. This patch changes the board
file only, the driver is ported in separate patch.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:21:05 +03:00
Tony Lindgren
be73246058 ARM: OMAP2+: Remove custom init_irq for remaining boards
With SoC specific timers, board specific init_irq is
no longer needed. Earlier this was still needed to
initialize the gptimer12 on Beagle based boards.

Also convert board-h4.c to use omap2_init_irq accidentally
did not get converted earlier.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26 17:50:37 -07:00
Tony Lindgren
e990a4060f ARM: OMAP2+: Use SoC specifc map_io
There's no longer any need for the board specific
map_io.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26 17:50:37 -07:00
Tony Lindgren
8f5b5a41eb ARM: OMAP: Introduce SoC specific early_init
Introduce them for each omap variant and just make them all call
omap2_init_common_infrastructure for now. Do this for each board-*.c
file except for board-generic and board-omap3beagle as they use
the same machine ID for multiple SoCs.

No functional changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-24 06:19:02 -07:00
Tony Lindgren
a4ca9dbe44 ARM: OMAP: Move omap2_init_common_devices out of init_early
There's no need to call omap2_init_common_devices from init_early.

It no longer does anything else except reprogram the memory timings
for some boards, so it's better to do it later so we have a chance
to get console messages if something goes wrong.

Move it to happen after omap_serial_init gets called. And while
patching it anyways, rename it to omap_sdrc_init as suggested by
Benoit Cousson <b-cousson@ti.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-24 04:48:10 -07:00
Nicolas Pitre
5e52b435b7 ARM: mach-omap2: convert boot_params to atag_offset
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-08-21 17:15:05 -04:00
Russell King
2f8163baad ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h
before we start consolidating the individual platform implementations
of the gpio header files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:27:41 +01:00
Tony Lindgren
e74984e46e omap: Set separate timer init functions to avoid cpu_is_omap tests
This is needed for the following patches so we can initialize the
rest of the hardware timers later on.

As with the init_irq calls, there's no need to do cpu_is_omap calls
during the timer init as we only care about the major omap generation.
This means that we can initialize the sys_timer with the .timer
entries alone.

Note that for now we just set stubs for the various sys_timer entries
that will get populated in a later patch. The following patches will
also remove the omap_dm_timer_init calls and change the init for the
rest of the hardware timers to happen with an arch_initcall.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-06-20 01:25:39 -07:00
Tony Lindgren
741e3a89de omap: Use separate init_irq functions to avoid cpu_is_omap tests early
This allows us to remove cpu_is_omap calls from init_irq functions.
There should not be any need for cpu_is_omap calls as at this point.
During the timer init we only care about SoC generation, and not about
subrevisions.

The main reason for the patch is that we want to initialize only
minimal omap specific code from the init_early call.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-06-16 05:42:09 -07:00
Tony Lindgren
4292435520 omap: Fix H4 init_irq to not call h4_init_flash
There should be no reason to call h4_init_flash this
early. It causes problems as things are not yet initialized.

Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-10 09:51:29 -08:00
Tony Lindgren
e41cccfe79 omap2+: Minimize board specific init_early calls
We should only call init_common_infrastructure and
init_common_devices from init_early.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-25 10:19:21 -08:00
Russell King - ARM Linux
3dc3bad6f1 ARM: OMAP2: use early init hook
Move non-mapping and non-irq initialization code out of .map_io and
.init_irq respectively into the new init_early hook.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-14 15:40:20 -08:00
Tony Lindgren
808601b758 Merge branch 'integration-2.6.38-for-tony' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-12-22 11:32:24 -08:00
Janusz Krzysztofik
da1f026b53 Keyboard: omap-keypad: use matrix_keypad.h
Most keypad drivers make use of the <linux/input/matrix_keypad.h>
defined macros, structures and inline functions.

Convert omap-keypad driver to use those as well, as suggested by a
compile time warning, hardcoded into the OMAP <palt/keypad.h>.

Created against linux-2.6.37-rc5.
Tested on Amstrad Delta.
Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to
board-h4.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:11:47 -08:00
Paul Walmsley
4805734bcc OMAP2+: io: split omap2_init_common_hw()
Split omap2_init_common_hw() into two functions.  The first,
omap2_init_common_infrastructure(), initializes the hwmod code and
data, the OMAP PM code, and the clock code and data.  The second,
omap2_init_common_devices(), handles any other early device
initialization that, for whatever reason, has not been or cannot be
moved to initcalls or early platform devices.

This patch is required for the hwmod postsetup patch, which allows
board files to change the state that hwmods should be placed into at
the conclusion of the hwmod _setup() function.  For example, for a
board whose creators wish to ensure watchdog coverage across the
entire kernel boot process, code to change the watchdog's postsetup
state will be added in the board-*.c file between the
omap2_init_common_infrastructure() and omap2_init_common_devices() function
calls.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-12-21 19:55:11 -07:00
Bryan Wu
1a6b59232b omap: kill all section mismatch warning for omap2plus_defconfig
This patch will kill following section mismatch warnings:

WARNING: vmlinux.o(.text+0x24a00): Section mismatch in reference from the function zoom_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function zoom_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because zoom_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.text+0x24bfc): Section mismatch in reference from the function cm_t35_twl_gpio_setup() to the (unknown reference) .init.data:(unknown)
The function cm_t35_twl_gpio_setup() references
the (unknown reference) __initdata (unknown).
This is often because cm_t35_twl_gpio_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.

WARNING: vmlinux.o(.data+0x1d3e0): Section mismatch in reference from the variable h4_config to the (unknown reference) .init.data:(unknown)
The variable h4_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1dc08): Section mismatch in reference from the variable sdp2430_config to the (unknown reference) .init.data:(unknown)
The variable sdp2430_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: vmlinux.o(.data+0x1e1d8): Section mismatch in reference from the variable apollon_config to the (unknown reference) .init.data:(unknown)
The variable apollon_config references
the (unknown reference) __initdata (unknown)
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-17 17:25:26 -08:00
Tony Lindgren
79b357c217 Merge branch 'devel-gpio' into omap-for-linus 2010-12-10 11:37:47 -08:00
Varadarajan, Charulatha
77640aabd7 OMAP: GPIO: Implement GPIO as a platform device
Implement GPIO as a platform device.

GPIO APIs are used in machine_init functions. Hence it is
required to complete GPIO probe before board_init. Therefore
GPIO device register and driver register are implemented as
postcore_initcalls.

omap_gpio_init() does nothing now and this function would be
removed in the next patch as it's usage is spread across most
of the board files.

Inorder to convert GPIO as platform device, modifications are
required in clockxxxx_data.c file for OMAP1 so that device names
can be used to obtain clock instead of getting clocks by
name/NULL ptr.

Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling
or disabling the clocks, modify sysconfig settings and remove usage
of clock FW APIs.
Note 1: Converting GPIO driver to use runtime PM APIs is not done as a
separate patch because GPIO clock names are different for various OMAPs
and are different for some of the banks in the same CPU. This would need
usage of cpu_is checks and bank id checks while using clock FW APIs in
the gpio driver. Hence while making GPIO a platform driver framework,
PM runtime APIs are used directly.

Note 2: While implementing GPIO as a platform device, pm runtime APIs
are used as mentioned above and modification is not done in gpio's
prepare for idle/ resume after idle functions. This would be done
in the next patch series and GPIO driver would be made to use dev_pm_ops
instead of sysdev_class in that series only.

Due to the above, the GPIO driver implicitly relies on
CM_AUTOIDLE = 1 on its iclk for power management to work, since the
driver never disables its iclk.
This would be taken care in the next patch series (see Note 3 below).

Refer to
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html
for more details.

Note 3: only pm_runtime_get_sync is called in gpio's probe() and
pm_runtime_put* is never called. This is to make the implementation
similar to the existing GPIO code. Another patch series would be sent
to correct this.

In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They
are enabled/ disabled whenever required using clock framework APIs

TODO:
1. Cleanup the GPIO driver. Use function pointers and register
offest pointers instead of using hardcoded values
2. Remove all cpu_is_ checks and OMAP specific macros
3. Remove usage of gpio_bank array so that only
   instance specific information is used in driver code
4. Rename 'method'/ avoid it's usage
5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4
6. Modify gpio's prepare for idle/ resume after idle functions
   to use runtime pm implentation.

Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Basak, Partha <p-basak2@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
[tony@atomide.com: updated for bank specific revision and updated boards]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07 16:26:57 -08:00
Aaro Koskinen
7203f8a48b arm: mach-omap2: remove NULL board_mux from board files
If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header
file instead of forcing every single board to define it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
[tony@atomide.com: updated for combined board-zoom files]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-02 17:03:41 -08:00
Linus Torvalds
7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Paul Walmsley
4814ced511 OMAP: control: move plat-omap/control.h to mach-omap2/control.h
Only OMAP2+ platforms have the System Control Module (SCM) IP block.
In the past, we've kept the SCM header file in plat-omap.  This has
led to abuse - device drivers including it; includes being added that
create implicit dependencies on OMAP2+ builds; etc.

In response, move the SCM headers into mach-omap2/.

As part of this, remove the direct SCM access from the OMAP UDC
driver.  It was clearly broken.  The UDC code needs an indepth review for
use on OMAP2+ chips.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-08 11:40:20 -06:00
Tony Lindgren
7590d1defd Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
Russell King
71ee7dad9b ARM: OMAP: Convert to use ->reserve method to reserve boot time memory
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:41 +01:00
Christoph Egger
847e951b99 Removing dead MACH_OMAP2_H4_USB1
MACH_OMAP2_H4_USB1 doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:59 +03:00
Christoph Egger
267ecec95f Removing dead MACH_OMAP_H4_OTG
MACH_OMAP_H4_OTG doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:03:59 +03:00
Christoph Egger
4705c1ca8b Removing dead OMAP_IR
OMAP_IR doesn't exist in Kconfig, therefore removing all references
for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
[tony@atomide.com: updated for new mux code]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:53 +03:00
Tony Lindgren
f99bf16d70 omap: mux: Convert 2420 platform init code to use new mux code
Convert 2420 platform init code to use new mux code

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:40 +03:00
Tony Lindgren
93c43f2561 omap: mux: Do keypad muxing in board-*.c files
This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.

Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
Tony Lindgren
23275d459e omap: mux: Select SIP package for H4
Select SIP package for H4

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:37 +03:00
Tony Lindgren
b5e8905bcd omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c
Move omap2 FS USB platform init code into mach-omap2/usb-fs.c. This will
allow further work later on to use omap hwmod for initializing the
device.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:29 +03:00
Ladislav Michl
561b036ad9 omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree

Cc: linux-mtd@lists.infradead.org
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 10:03:32 -08:00
Tony Lindgren
6fbd55d077 omap2/3/4: Fix omap2_map_common_io for multi-omap
Fix omap2_map_common_io for multi-omap

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:26:58 -08:00
Tony Lindgren
ce491cf854 omap: headers: Move remaining headers from include/mach to include/plat
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 09:40:47 -07:00
Santosh Shilimkar
b4224b236b omap: Fix DEBUG_LL UART io address
This patch fixes the low level debug UART io address as per this series.
The change is essential to have CONFIG_DEBUG_LL working.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-19 17:25:55 -07:00
Paul Walmsley
b3c6df3ab2 OMAP2/3 board-*.c files: read bootloader configuration earlier
Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03 20:14:02 +03:00
Kalle Valo
15ac408ee5 OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idle
OMAP tags are deprecrated so drop them.

Drop UART config data which decides which UARTs to enable during boot.
This is no longer necessary since serial core code disables clocks
after inactivity.

Background: with new UART idle code, all on-chip UARTs are idled using
a configurable inactivity timer (default 5 seconds.)  After the
inactivity timer, UART clocks are disabled automatically.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 10:51:31 -07:00
Jean Pihet
58cda884ec OMAP3 SDRC: add support for 2 SDRAM chip selects
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24 19:43:25 -06:00
Tony Lindgren
ba16ec7cab ARM: OMAP: Remove old dead gpio expander code
This should be done with GPIO calls. Patches against the
mainline tree welcome to add the necessary working functionality
back.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:40 -07:00
Russell King
8937b7349c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2009-03-25 18:31:35 +00:00
Felipe Balbi
b0b5aa3f4c ARM: OMAP: get rid of OMAP_TAG_USB, v2
OMAP_TAGS should vanish soon since they're not generic arm tags.
Most of them can be converted to a platform_data or parsed
from a command line like e.g. serial tag.

For OMAP_TAG_USB we just let boards call omap_usb_init()
passing a pointer to omap_usb_config.

Patch updated by Tony for mainline, basically make
n770 and h4 compile. Also folded in a fix for OSK
by David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Tony Lindgren
40662d7731 ARM: OMAP: No need to include board-h4.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:36 -07:00
Paul Walmsley
87246b7567 [ARM] OMAP2 SDRC: add SDRAM timing parameter infrastructure
For a given SDRAM clock rate, SDRAM chips require memory controllers
to use a specific set of timing minimums and maximums to transfer data
reliably.  These parameters can be different for different memory chips
and can also potentially vary by board.

This patch adds the infrastructure for board-*.c files to pass this
timing data to the SDRAM controller init function.  The timing data is
specified in an 'omap_sdrc_params' structure, in terms of SDRC
controller register values.  An array of these structs, one per SDRC
target clock rate, is passed by the board-*.c file to
omap2_init_common_hw().

This patch does not define the values for different memory chips, nor
does it use the values for anything; those will come in subsequent patches.

linux-omap source commit is bc84ecfc795c2d1c5cda8da4127cf972f488a696.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08 17:50:39 +00:00
Tony Lindgren
652bcd8f72 omap mmc: Remove broken MMC init code
Most of the omap1 MMC boards got broken by an earlier patch
138ab9f832. If you look closely,
the MMC init funtions are pretty much just stubs.

Remove broken init code to make room for cleaner MMC init code.

Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:37:16 -08:00
David Brownell
6a769ed40a ARM: OMAP2: bard-h4: list those eeproms
Declare the two 1Kbit EEPROMs included in the H4 board stack.
One is on the CPU card; the other is on the mainboard.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:36:33 -08:00