Commit Graph

134 Commits

Author SHA1 Message Date
Tejun Heo
0a30288da1 blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe
blk-mq uses percpu_ref for its usage counter which tracks the number
of in-flight commands and used to synchronously drain the queue on
freeze.  percpu_ref shutdown takes measureable wallclock time as it
involves a sched RCU grace period.  This means that draining a blk-mq
takes measureable wallclock time.  One would think that this shouldn't
matter as queue shutdown should be a rare event which takes place
asynchronously w.r.t. userland.

Unfortunately, SCSI probing involves synchronously setting up and then
tearing down a lot of request_queues back-to-back for non-existent
LUNs.  This means that SCSI probing may take more than ten seconds
when scsi-mq is used.

This will be properly fixed by implementing a mechanism to keep
q->mq_usage_counter in atomic mode till genhd registration; however,
that involves rather big updates to percpu_ref which is difficult to
apply late in the devel cycle (v3.17-rc6 at the moment).  As a
stop-gap measure till the proper fix can be implemented in the next
cycle, this patch introduces __percpu_ref_kill_expedited() and makes
blk_mq_freeze_queue() use it.  This is heavy-handed but should work
for testing the experimental SCSI blk-mq implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de
Fixes: add703fda9 ("blk-mq: use percpu_ref for mq usage count")
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-24 08:29:36 -06:00
Jens Axboe
8b95741569 blk-mq: use blk_mq_start_hw_queues() when running requeue work
When requests are retried due to hw or sw resource shortages,
we often stop the associated hardware queue. So ensure that we
restart the queues when running the requeue work, otherwise the
queue run will be a no-op.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22 11:55:56 -06:00
Jens Axboe
6b55e1f2d0 blk-mq: fix potential oops on out-of-memory in __blk_mq_alloc_rq_maps()
__blk_mq_alloc_rq_maps() can be invoked multiple times, if we scale
back the queue depth if we are low on memory. So don't clear
set->tags when we fail, this is handled directly in
the parent function, blk_mq_alloc_tag_set().

Reported-by: Robert Elliott  <Elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22 11:55:23 -06:00
Christoph Hellwig
a57a178a49 blk-mq: avoid infinite recursion with the FUA flag
We should not insert requests into the flush state machine from
blk_mq_insert_request.  All incoming flush requests come through
blk_{m,s}q_make_request and are handled there, while blk_execute_rq_nowait
should only be called for BLOCK_PC requests.  All other callers
deal with requests that already went through the flush statemchine
and shouldn't be reinserted into it.

Reported-by: Robert Elliott  <Elliott@hp.com>
Debugged-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22 11:55:19 -06:00
David Hildenbrand
683d0e1262 blk-mq: Avoid race condition with uninitialized requests
This patch should fix the bug reported in
https://lkml.org/lkml/2014/9/11/249.

We have to initialize at least the atomic_flags and the cmd_flags when
allocating storage for the requests.

Otherwise blk_mq_timeout_check() might dereference uninitialized
pointers when racing with the creation of a request.

Also move the reset of cmd_flags for the initializing code to the point
where a request is freed. So we will never end up with pending flush
request indicators that might trigger dereferences of invalid pointers
in blk_mq_timeout_check().

Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reported-by: Paulo De Rezende Pinatti <ppinatti@linux.vnet.ibm.com>
Tested-by: Paulo De Rezende Pinatti <ppinatti@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22 11:55:14 -06:00
Jens Axboe
538b753418 blk-mq: request deadline must be visible before marking rq as started
When we start the request, we set the deadline and flip the bits
marking the request as started and non-complete. However, it's
important that the deadline store is ordered before flipping the
bits, otherwise we could have a small window where the request is
marked started but with an invalid deadline. This can confuse the
timeout handling.

Suggested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-22 11:54:04 -06:00
Jens Axboe
a516440542 blk-mq: scale depth and rq map appropriate if low on memory
If we are running in a kdump environment, resources are scarce.
For some SCSI setups with a huge set of shared tags, we run out
of memory allocating what the drivers is asking for. So implement
a scale back logic to reduce the tag depth for those cases, allowing
the driver to successfully load.

We should extend this to detect low memory situations, and implement
a sane fallback for those (1 queue, 64 tags, or something like that).

Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-10 09:02:03 -06:00
Robert Elliott
5676e7b6db blk-mq: cleanup after blk_mq_init_rq_map failures
In blk-mq.c blk_mq_alloc_tag_set, if:
	set->tags = kmalloc_node()
succeeds, but one of the blk_mq_init_rq_map() calls fails,
	goto out_unwind;
needs to free set->tags so the caller is not obligated
to do so.  None of the current callers (null_blk,
virtio_blk, virtio_blk, or the forthcoming scsi-mq)
do so.

set->tags needs to be set to NULL after doing so,
so other tag cleanup logic doesn't try to free
a stale pointer later.  Also set it to NULL
in blk_mq_free_tag_set.

Tested with error injection on the forthcoming
scsi-mq + hpsa combination.

Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-03 10:44:15 -06:00
Tony Battersby
6f4a16266f scsi-mq: fix requests that use a separate CDB buffer
This patch fixes code such as the following with scsi-mq enabled:

    rq = blk_get_request(...);
    blk_rq_set_block_pc(rq);

    rq->cmd = my_cmd_buffer; /* separate CDB buffer */

    blk_execute_rq_nowait(...);

Code like this appears in e.g. sg_start_req() in drivers/scsi/sg.c (for
large CDBs only).  Without this patch, scsi_mq_prep_fn() will set
rq->cmd back to rq->__cmd, causing the wrong CDB to be sent to the device.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-22 15:04:31 -05:00
Tejun Heo
cddd5d1764 blk-mq: blk_mq_freeze_queue() should allow nesting
While converting to percpu_ref for freezing, add703fda9 ("blk-mq:
use percpu_ref for mq usage count") incorrectly made
blk_mq_freeze_queue() misbehave when freezing is nested due to
percpu_ref_kill() being invoked on an already killed ref.

Fix it by making blk_mq_freeze_queue() kill and kick the queue only
for the outermost freeze attempt.  All the nested ones can simply wait
for the ref to reach zero.

While at it, remove unnecessary @wake initialization from
blk_mq_unfreeze_queue().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:51 -05:00
Jens Axboe
a68aafa5b2 blk-mq: correct a few wrong/bad comments
Just grammar or spelling errors, nothing major.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:49 -05:00
Jens Axboe
274a5843ff blk-mq: don't allow merges if turned off for the queue
blk-mq uses BLK_MQ_F_SHOULD_MERGE, as set by the driver at init time,
to determine whether it should merge IO or not. However, this could
also be disabled by the admin, if merging is switched off through
sysfs. So check the general queue state as well before attempting
to merge IO.

Reported-by: Rob Elliott <Elliott@hp.com>
Tested-by: Rob Elliott <Elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:45 -05:00
Ming Lei
dd84008708 blk-mq: fix WARNING "percpu_ref_kill() called more than once!"
Before doing queue release, the queue has been freezed already
by blk_cleanup_queue(), so needn't to freeze queue for deleting
tag set.

This patch fixes the WARNING of "percpu_ref_kill() called more than once!"
which is triggered during unloading block driver.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-15 12:38:20 -06:00
Tejun Heo
add703fda9 blk-mq: use percpu_ref for mq usage count
Currently, blk-mq uses a percpu_counter to keep track of how many
usages are in flight.  The percpu_counter is drained while freezing to
ensure that no usage is left in-flight after freezing is complete.
blk_mq_queue_enter/exit() and blk_mq_[un]freeze_queue() implement this
per-cpu gating mechanism.

This type of code has relatively high chance of subtle bugs which are
extremely difficult to trigger and it's way too hairy to be open coded
in blk-mq.  percpu_ref can serve the same purpose after the recent
changes.  This patch replaces the open-coded per-cpu usage counting
and draining mechanism with percpu_ref.

blk_mq_queue_enter() performs tryget_live on the ref and exit()
performs put.  blk_mq_freeze_queue() kills the ref and waits until the
reference count reaches zero.  blk_mq_unfreeze_queue() revives the ref
and wakes up the waiters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:34:38 -06:00
Tejun Heo
72d6f02a8d blk-mq: collapse __blk_mq_drain_queue() into blk_mq_freeze_queue()
Keeping __blk_mq_drain_queue() as a separate function doesn't buy us
anything and it's gonna be further simplified.  Let's flatten it into
its caller.

This patch doesn't make any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:33:02 -06:00
Tejun Heo
780db2071a blk-mq: decouble blk-mq freezing from generic bypassing
blk_mq freezing is entangled with generic bypassing which bypasses
blkcg and io scheduler and lets IO requests fall through the block
layer to the drivers in FIFO order.  This allows forward progress on
IOs with the advanced features disabled so that those features can be
configured or altered without worrying about stalling IO which may
lead to deadlock through memory allocation.

However, generic bypassing doesn't quite fit blk-mq.  blk-mq currently
doesn't make use of blkcg or ioscheds and it maps bypssing to
freezing, which blocks request processing and drains all the in-flight
ones.  This causes problems as bypassing assumes that request
processing is online.  blk-mq works around this by conditionally
allowing request processing for the problem case - during queue
initialization.

Another weirdity is that except for during queue cleanup, bypassing
started on the generic side prevents blk-mq from processing new
requests but doesn't drain the in-flight ones.  This shouldn't break
anything but again highlights that something isn't quite right here.

The root cause is conflating blk-mq freezing and generic bypassing
which are two different mechanisms.  The only intersecting purpose
that they serve is during queue cleanup.  Let's properly separate
blk-mq freezing from generic bypassing and simply use it where
necessary.

* request_queue->mq_freeze_depth is added and
  blk_mq_[un]freeze_queue() now operate on this counter instead of
  ->bypass_depth.  The replacement for QUEUE_FLAG_BYPASS isn't added
  but the counter is tested directly.  This will be further updated by
  later changes.

* blk_mq_drain_queue() is dropped and "__" prefix is dropped from
  blk_mq_freeze_queue().  Queue cleanup path now calls
  blk_mq_freeze_queue() directly.

* blk_queue_enter()'s fast path condition is simplified to simply
  check @q->mq_freeze_depth.  Previously, the condition was

	!blk_queue_dying(q) &&
	    (!blk_queue_bypass(q) || !blk_queue_init_done(q))

  mq_freeze_depth is incremented right after dying is set and
  blk_queue_init_done() exception isn't necessary as blk-mq doesn't
  start frozen, which only leaves the blk_queue_bypass() test which
  can be replaced by @q->mq_freeze_depth test.

This change simplifies the code and reduces confusion in the area.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:31:13 -06:00
Tejun Heo
776687bce4 block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
Currently, both blk_queue_bypass_start() and blk_mq_freeze_queue()
skip queue draining if bypass_depth was already above zero.  The
assumption is that the one which bumped the bypass_depth should have
performed draining already; however, there's nothing which prevents a
new instance of bypassing/freezing from starting before the previous
one finishes draining.  The current code may allow the later
bypassing/freezing instances to complete while there still are
in-flight requests which haven't finished draining.

Fix it by draining regardless of bypass_depth.  We still skip draining
from blk_queue_bypass_start() while the queue is initializing to avoid
introducing excessive delays during boot.  INIT_DONE setting is moved
above the initial blk_queue_bypass_end() so that bypassing attempts
can't slip inbetween.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:29:17 -06:00
Tejun Heo
531ed6261e blk-mq: fix a memory ordering bug in blk_mq_queue_enter()
blk-mq uses a percpu_counter to keep track of how many usages are in
flight.  The percpu_counter is drained while freezing to ensure that
no usage is left in-flight after freezing is complete.

blk_mq_queue_enter/exit() and blk_mq_[un]freeze_queue() implement this
per-cpu gating mechanism; unfortunately, it contains a subtle bug -
smp_wmb() in blk_mq_queue_enter() doesn't prevent prevent the cpu from
fetching @q->bypass_depth before incrementing @q->mq_usage_counter and
if freezing happens inbetween the caller can slip through and freezing
can be complete while there are active users.

Use smp_mb() instead so that bypass_depth and mq_usage_counter
modifications and tests are properly interlocked.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:27:06 -06:00
Jens Axboe
0ffbce80c2 blk-mq: blk_mq_start_hw_queue() should use blk_mq_run_hw_queue()
Currently it calls __blk_mq_run_hw_queue(), which depends on the
CPU placement being correct. This means it's not possible to call
blk_mq_start_hw_queues(q) from a context that is correct for all
queues, leading to triggering the

WARN_ON(!cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask));

in __blk_mq_run_hw_queue().

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-25 08:22:34 -06:00
Christoph Hellwig
95ed068165 blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:40 -06:00
Christoph Hellwig
8f5280f4ee blk-mq: properly drain stopped queues
If we need to drain a queue we need to run all queues, even if they
are marked stopped to make sure the driver has a chance to error out
on all queued requests.

This fixes surprise removal with scsi-mq.

Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:38 -06:00
Ming Lei
2b8393b43e blk-mq: add timer in blk_mq_start_request
This way will become consistent with non-mq case, also
avoid to update rq->deadline twice for mq.

The comment said: "We do this early, to ensure we are on
the right CPU.", but no percpu stuff is used in blk_add_timer(),
so it isn't necessary. Even when inserting from plug list, there
is no such guarantee at all.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-09 10:20:06 -06:00
Jens Axboe
3ee3237239 blk-mq: always initialize request->start_time
The blk-mq core only initializes this if io stats are enabled, since
blk-mq only reads the field in that case. But drivers could
potentially use it internally, so ensure that we always set it to
the current time when the request is allocated.

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-09 09:36:53 -06:00
Jens Axboe
f6be4fb4bc blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
It'll be used in blk_mq_start_request() to set a potential timeout
for the request, so clear it to zero at alloc time to ensure that
we know if someone has set it or not.

Fixes random early timeouts on NVMe testing.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 11:05:25 -06:00
Keith Busch
3b632cf0ea blk-mq: don't allow queue entering for a dying queue
If the queue is going away, don't let new allocs or queueing
happen on it. Go through the normal wait process, and exit with
ENODEV in that case.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 10:40:03 -06:00
Jens Axboe
a4391c6465 blk-mq: bump max tag depth to 10K tags
For some scsi-mq cases, the tag map can be huge. So increase the
max number of tags we support.

Additionally, don't fail with EINVAL if a user requests too many
tags. Warn that the tag depth has been adjusted down, and store
the new value inside the tag_set passed in.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 08:04:46 -06:00
Jens Axboe
0e62f51f87 blk-mq: let blk_mq_tag_to_rq() take blk_mq_tags as the main parameter
We currently pass in the hardware queue, and get the tags from there.
But from scsi-mq, with a shared tag space, it's a lot more convenient
to pass in the blk_mq_tags instead as the hardware queue isn't always
directly available. So instead of having to re-map to a given
hardware queue from rq->mq_ctx, just pass in the tags structure.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04 10:23:49 -06:00
Jens Axboe
f899fed442 blk-mq: fix regression from commit 624dbe4754
When the code was collapsed to avoid duplication, the recent patch
for ensuring that a queue is idled before free was dropped, which was
added by commit 19c5d84f14.

Add back the blk_mq_tag_idle(), to ensure we don't leak a reference
to an active queue when it is freed.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04 09:11:53 -06:00
Jens Axboe
ff87bcec19 blk-mq: handle NULL req return from blk_map_request in single queue mode
blk_mq_map_request() can return NULL if we fail entering the queue
(dying, or removed), in which case it has already ended IO on the
bio. So nothing more to do, except just return.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei
e6cdb0929f blk-mq: fix sparse warning on missed __percpu annotation
'struct blk_mq_ctx' is  __percpu, so add the annotation
and fix the sparse warning reported from Fengguang:

	[block:for-linus 2/3] block/blk-mq.h:75:16: sparse: incorrect
	type in initializer (different address spaces)

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei
cb96a42cc1 blk-mq: fix schedule from atomic context
blk_mq_put_ctx() has to be called before io_schedule() in
bt_get().

This patch fixes the problem by taking similar approach from
percpu_ida allocation for the situation.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei
1aecfe4887 blk-mq: move blk_mq_get_ctx/blk_mq_put_ctx to mq private header
The blk-mq tag code need these helpers.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:38 -06:00
Jens Axboe
ed851860b4 blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
We have callers outside of the blk-mq proper (like timeouts) that
want to call __blk_mq_complete_request(), so rename the function
and put the decision code for whether to use ->softirq_done_fn
or blk_mq_endio() into __blk_mq_complete_request().

This also makes the interface more logical again.
blk_mq_complete_request() attempts to atomically mark the request
completed, and calls __blk_mq_complete_request() if successful.
__blk_mq_complete_request() then just ends the request.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 21:20:50 -06:00
Jens Axboe
feff689412 blk-mq: remember to start timeout handler for direct queue
Commit 07068d5b8e added a direct-to-hw-queue mode, but this mode
needs to remember to add the request timeout handler as well.
Without it, we don't track timeouts for these requests.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 15:42:56 -06:00
Jens Axboe
67aec14ce8 blk-mq: make the sysfs mq/ layout reflect current mappings
Currently blk-mq registers all the hardware queues in sysfs,
regardless of whether it uses them (e.g. they have CPU mappings)
or not. The unused hardware queues lack the cpux/ directories,
and the other sysfs entries (like active, pending, etc) are all
zeroes.

Change this so that sysfs correctly reflects the current mappings
of the hardware queues.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:25:36 -06:00
Shaohua Li
2230237500 blk-mq: blk_mq_tag_to_rq should handle flush request
flush request is special, which borrows the tag from the parent
request. Hence blk_mq_tag_to_rq needs special handling to return
the flush request from the tag.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:06:42 -06:00
Jens Axboe
4b570521be blk-mq: request initialization optimizations
We currently clear a lot more than we need to, so make that a bit
more clever. Make some of the init dependent on features, like
only setting start_time if we are going to use it.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 11:00:11 -06:00
Jens Axboe
05f1dd5315 block: add queue flag for disabling SG merging
If devices are not SG starved, we waste a lot of time potentially
collapsing SG segments. Enough that 1.5% of the CPU time goes
to this, at only 400K IOPS. Add a queue flag, QUEUE_FLAG_NO_SG_MERGE,
which just returns the number of vectors in a bio instead of looping
over all segments and checking for collapsible ones.

Add a BLK_MQ_F_SG_MERGE flag so that drivers can opt-in on the sg
merging, if they so desire.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 09:53:32 -06:00
Christoph Hellwig
cdef54dd85 blk-mq: remove alloc_hctx and free_hctx methods
There is no need for drivers to control hardware context allocation
now that we do the context to node mapping in common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 10:18:31 -06:00
Jens Axboe
75bb4625bb blk-mq: add file comments and update copyright notices
None of the blk-mq files have an explanatory comment at the top
for what that particular file does. Add that and add appropriate
copyright notices as well.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 10:15:41 -06:00
Christoph Hellwig
d852564f8c blk-mq: remove blk_mq_alloc_request_pinned
We now only have one caller left and can open code it there in a cleaner
way.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:27 -06:00
Christoph Hellwig
793597a6a9 blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
We already do a non-blocking allocation in blk_mq_map_request, no need
to repeat it.  Just call __blk_mq_alloc_request to wait directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:25 -06:00
Christoph Hellwig
a3bd77567c blk-mq: remove blk_mq_wait_for_tags
The current logic for blocking tag allocation is rather confusing, as we
first allocated and then free again a tag in blk_mq_wait_for_tags, just
to attempt a non-blocking allocation and then repeat if someone else
managed to grab the tag before us.

Instead change blk_mq_alloc_request_pinned to simply do a blocking tag
allocation itself and use the request we get back from it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:23 -06:00
Christoph Hellwig
5dee857720 blk-mq: initialize request in __blk_mq_alloc_request
Both callers if __blk_mq_alloc_request want to initialize the request, so
lift it into the common path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:21 -06:00
Christoph Hellwig
4ce01dd1a0 blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
Instead of having two almost identical copies of the same code just let
the callers pass in the reserved flag directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:19 -06:00
Christoph Hellwig
6fca6a611c blk-mq: add helper to insert requests from irq context
Both the cache flush state machine and the SCSI midlayer want to submit
requests from irq context, and the current per-request requeue_work
unfortunately causes corruption due to sharing with the csd field for
flushes.  Replace them with a per-request_queue list of requests to
be requeued.

Based on an earlier test by Ming Lei.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 08:08:02 -06:00
Jens Axboe
95f0968499 blk-mq: allow non-softirq completions
Right now we export two ways of completing a request:

1) blk_mq_complete_request(). This uses an IPI (if needed) and
   completes through q->softirq_done_fn(). It also works with
   timeouts.

2) blk_mq_end_io(). This completes inline, and ignores any timeout
   state of the request.

Let blk_mq_complete_request() handle non-softirq_done_fn completions
as well, by just completing inline. If a driver has enough completion
ports to place completions correctly, it need not define a
mq_ops->complete() and we can avoid an indirect function call by
doing the completion inline.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 17:46:48 -06:00
Jens Axboe
f14bbe77a9 blk-mq: pass in suggested NUMA node to ->alloc_hctx()
Drivers currently have to figure this out on their own, and they
are missing information to do it properly. The ones that did
attempt to do it, do it wrong.

So just pass in the suggested node directly to the alloc
function.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 12:06:53 -06:00
Ming Lei
3d2936f457 block: only allocate/free mq_usage_counter in blk-mq
The percpu counter is only used for blk-mq, so move
its allocation and free inside blk-mq, and don't
allocate it for legacy queue device.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 09:37:08 -06:00
Ming Lei
624dbe4754 blk-mq: avoid code duplication
blk_mq_exit_hw_queues() and blk_mq_free_hw_queues()
are introduced to avoid code duplication.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 09:37:06 -06:00