Commit Graph

506 Commits

Author SHA1 Message Date
Guenter Roeck
0d6aaffc3a hwmon: (nct7904) Rename pwm attributes to match hwmon ABI
pwm attributes have well defined names, which should be used.

Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
Cc: stable@vger.kernel.org #v4.1+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-07-29 20:06:46 -07:00
Jean Delvare
97607f9882 hwmon: Document which I2C addresses can be probed
Add an item to the checklist when submitting a new hwmon driver: only
some I2C addresses can be probed, others should not for safety
reasons.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-07-03 14:39:05 +02:00
Roger Lucas
f617f7310c hwmon: (w83792d) Additional PWM outputs support
Add pwm[4-7] and the associated pwm[4-7]_mode attributes.

Signed-off-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-07-03 14:39:05 +02:00
Maciej S. Szmigiero
761c1770f2 hwmon: add driver for Microchip TC74
Add hwmon driver for the Microchip TC74.

The TC74 is a single-input 8-bit I2C temperature sensor,
with +-2 degrees centigrade accuracy.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-21 22:54:53 -07:00
Beomho Seo
887ee43477 hwmon: (ntc_thermistor) Add support for ncpXXwf104
This patch adds support for the ntc thermistor NCPXXWF104 series.

Cc: Jean Delvare <jdelvare@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-05-31 22:58:36 -07:00
Guenter Roeck
9aecac04d8 hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37
I2C address 0x37 may be used by EEPROMs, which can result in false
positives. Do not attempt to detect a chip at this address.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-05-29 13:37:06 -07:00
Guenter Roeck
3ba9d977a9 hwmon: (it87) Add support for IT8620E
IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:01:00 -07:00
Guenter Roeck
4ee07157d6 hwmon: (it87) Add support for IT8790E
IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:59 -07:00
Vadim V. Vlasov
9c947d25c9 hwmon: Add Nuvoton NCT7904 hwmon driver
The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
interface, up to 12 fan tachometer inputs, up to 4 fan control channels
with SmartFan.

Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
[Guenter Roeck: Fixed whitespace errors, dropped redundant comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Thomas Lorblanches
a0c1424acb hwmon: (it87) Add support for IT8786E
IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
0ea2f1db8e hwmon: (jc42) Add support for additional IDT temperature sensors
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
7bc32d298b hwmon: (it87) Add support for IT8781F
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Kevin Hilman
add513be1c hwmon: (ina2xx) Add ina231 compatible string
Add support for "ina231" as compatible string, and update
Documentation and Kconfig accordingly.

Tested with the Exynos5422-based odroid-xu3 board which has on-board
INA231 sensors.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski
72a87a47a8 hwmon: (ina2xx) implement update_interval attribute for ina226
This attribute allows to configure the update interval of ina226. Although
the bus and shunt voltage conversion times remain hardcoded to 1.1 ms, we can
now modify said interval by changing the averaging rate.

While we're at it - add an additional variable to ina2xx_data, which holds
the current configuration settings - this way we'll be able to restore the
configuration in case of an unexpected chip reset.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski
8a5fc79513 hwmon: (ina2xx) make shunt resistance configurable at run-time
The shunt resistance can only be set via platform_data or device tree. This
isn't suitable for devices in which the shunt resistance can change/isn't
known at boot-time.

Add a sysfs attribute that allows to read and set the shunt resistance.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Guenter Roeck
907a6d5824 hwmon: (tmp401) Detect TMP435 on all addresses it supports
TMP435 supports a range of I2C addresses, not just 0x4c.

Cc: Patrick Titiano <ptitiano@baylibre.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-08 06:48:37 -08:00
Patrick Titiano
06adbaec2a hwmon: (tmp401) Add support for TI TMP435
Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
[Bartosz Golaszewski: prepared for submission, code review fixes]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Guenter Roeck: Merged two patches into one]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-04 10:59:42 -08:00
Guenter Roeck
dfcd4c53be hwmon: (lm95234) Add support for LM95233
LM95233 is similar to LM95234, but it only supports two
instead of four external temperature sensors.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 06:11:53 -08:00
Guenter Roeck
162a8dfe73 hwmon: (lm95245) Add support for LM95235
LM95235 is register compatible to LM95245.

Also update link to LM95245 data sheet, and drop the link to the
datasheet from the driver source to simplify code maintenance.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 03:44:18 -08:00
Guenter Roeck
8aefb93f09 hwmon: (nct6775) Add support for NCT6792D
NCT6792D is similar to NCT6791D. Only beep control and temperature
monitoring registers are different.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck
b6e6dd8e9f hwmon: (nct6775) Documentation updates
Document support for NCT6102D/NCT6104D/NCT6106D and NCT6791D.
Document that NCT5573D is compatible to NCT6775F with the same chip ID.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Michael Thalmeier
799fc60214 hwmon: (lm75) Add support for the NXP LM75B
It is basically a faster lm75 with improved (11 bit) resolution.

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck
3434f37835 hwmon: Driver for Nuvoton NCT7802Y
NCT7802Y is an I2C based hardware monitoring chip from Nuvoton.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck
7ad8966f4f Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUItc7AAoJEFGvii+H/HdhxTEP/A0Gg35acsBa8JPWUGuTcGTi
 GHDdnDh1sJtJWadKhs+JV9tOX80YY/5OaHr0TKXcb0eAZopqG4G4yyJXmju+rkFn
 sp4nQ4QzM8gNzmVpo6K45xdZw913QQbVcwDThnZwq1xMHVvMT2TFZ+PQLXZ2e2kN
 HRs65Ftw9geNlZ6cLSXPa+fmhbhC90izXRYB/+eSv9LfxJkARVBtRwVkjLnbe52h
 V7gm/sqcdLs4S0Iauv3qPCjmNCtLWjzJsjq+umiEmmwRvWXGHcLWxCSbmrMsi075
 VmMTY1G+ys2OaNo4wpMEx3s2+Cg/dxyMKfuJn3Zz+Wk196v4UaQWFKBfH8IcjcuJ
 zKy9RntFZ6Esut/PeaMlk7nlgkSXOEbQZFcMDhn8LFwL8LzVDUIMtmcIEsfwHfme
 SWGt6lYUkeSC0yxdylYtIvAKVhkSInkg0z7YiChB0eHflBgWsNn4r8v5iGk9yAXu
 keR9sQlXKS2gFbMtZ8e+VgNVqPmapJx+1E1F5/JbjVpiQG+fzsleHi9UF91pyLJL
 IGZM51l2FEMBMuKSNEUy+mcLX4Y/63iEg3fGvv5nX52A0MVrL47ADDJSEoaZoUpg
 Yz3AW/+yYKi5cmcZ7sUirrCHawvfIYGeR1jZjYaIk8lAeqjFHTDzayIXUoOoQfN7
 vi+fRCxYLA/Z/Rnfylmt
 =keMM
 -----END PGP SIGNATURE-----

Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-next

Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24 09:25:06 -07:00
Andreas Werner
964356938f hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver
Added driver to support the 14F021P00 BMC Hardware Monitoring.
The BMC is a Board Management Controller including monitoring of the
board voltages.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24 15:36:33 +01:00
Aravind Gopalakrishnan
f89ce2706d hwmon: (k10temp) Add support for F15h M60h
This patch adds temperature monitoring support for F15h M60h processor.
 - Add new pci device id for the relevant processor
 - The functionality of REG_REPORTED_TEMPERATURE is moved to
   D0F0xBC_xD820_0CA4 [Reported Temperature Control]
   - So, use this to get CUR_TEMP value
   - Since we need an indirect register access, protect this with
     a mutex lock
 - Add Kconfig, Doc entries to indicate support for this processor.

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
[Guenter Roeck: Declare new mutex and function static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-22 11:14:52 -07:00
Kamil Debski
d82d57767c hwmon: Add pwm-fan driver
The pwm-fan driver enables control of fans connected to PWM lines.
This driver uses the PWM framework, so it is compatible with all
PWM devices that provide drivers through the PWM framework.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
[Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Neelesh Gupta
24c1aa8587 hwmon: (powerpc/powernv) hwmon driver for power, fan rpm, voltage and temperature
This patch adds basic kernel support for reading power values, fan
speed rpm, voltage and temperature data on powernv platforms which
will be exported to user space through sysfs interface.

Test results:
-------------
[root@tul163p1 ~]# sensors
ibmpowernv-isa-0000
Adapter: ISA adapter
fan1:        5465 RPM  (min =    0 RPM)
fan2:        5152 RPM  (min =    0 RPM)
fan3:        5521 RPM  (min =    0 RPM)
fan4:        4891 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
fan6:           0 RPM  (min =    0 RPM)
fan7:        7480 RPM  (min =    0 RPM)
fan8:        7944 RPM  (min =    0 RPM)
temp1:        +39.0°C  (high =  +0.0°C)
power1:      190.00 W

[root@tul163p1 ~]# ls /sys/devices/platform/
alarmtimer  ibmpowernv.0  power  rtc-generic  serial8250  uevent
[root@tul163p1 ~]# ls /sys/devices/platform/ibmpowernv.0/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]# ls /sys/class/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]#

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Zhu, Richard \(NSN - CN/Beijing\)
a8bfeceb0c hwmon: (pmbus) Add tps40422 front-end driver
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on
page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command
on page 0, this will lead to a result that the temperature sensor in page 1 couldn't
be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo
front-end driver.

Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com>
[Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Guenter Roeck
05c77ab240 hwmon: (tmp421) Add support for TMP441 and TMP442
TMP441 and TMP442 are compatible to TMP421 and TMP422.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:38 -07:00
Guenter Roeck
a63ee9d83b hwmon: (tmp421) Strengthen detect function
Not all supported chips support the entire I2C address range.
Only accept specific chips at the addresses supported by that chip.
Check for invalid values in conversion rate and status registers.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:37 -07:00
Johannes Pointner
ed67f0872b hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS
This patch adds support for the ntc thermistor B57330V2103 from EPCOS.

Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:35 -07:00
Frans Klaver
c83959f89f hwmon: (lm75) Add support for TMP112
TMP112 is compatible to LM75.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:34 -07:00
Heiko Schocher
d17a7dca04 hwmon: Driver for TI TMP103 temperature sensor
Driver for the TI TMP103.

The TI TMP103 is similar to the TMP102.  It differs from the TMP102
by having only 8 bit registers.

Signed-off-by: Heiko Schocher <hs@denx.de>
[linux@roeck-us.net: Select REGMAP_I2C in Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Scott Kanowitz
f4ff415564 hwmon: Add support for Lattice's POWR1220 power manager IC
This patch adds support for Lattice's POWR1220 power manager IC. Read
access to all the ADCs on the chip are supported through the hwmon
sysfs files.

Signed-off-by: Scott Kanowitz <skanowitz@echo360.com>
[Guenter Roeck: Removed some extra ( )]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Naveen Krishna Chatradhi
8b6f5e0f19 hwmon: (ntc_thermistor) Use the manufacturer name properly
Murata Manufacturing Co., Ltd is the vendor for
NTC (Negative Temperature coefficient) based Thermistors.
But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the
compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-25 07:09:13 -07:00
Tomas Pop
1a539d372e hwmon: add support for Sensirion SHTC1 sensor
Add support for Sensirion SHTC1 and compatible temperature and humidity
sensors.

Signed-off-by: Tomas Pop <tomas.pop@sensirion.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-12 08:36:48 -07:00
Linus Torvalds
f456205265 New driver for NCT6683D
New chip support to existing drivers:
 	Add support for STTS2004 and AT30TSE004 to jc42 driver
 	Add support for EMC1402/EMC1412/EMC1422 to emc1403 driver
 
 Other notable changes:
 	Document hwmon kernel API
 	Convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421,
 	and tmp102 drivers to use new hwmon API functions
 	Replace function macros in lm80, lm92, and jc42 drivers with
 	real code
 	Convert emc1403 driver to use regmap, add support for additional
 	attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
 	Various additional cleanup and minor bug fixes in several drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjUZbAAoJEMsfJm/On5mBnY4P/A15UCpfNzNa/tYzHUYtb0/Y
 7yI6fEWhgSegiWuWl3I7jOJrz+uU2emrIdOVW1ci8Y7WNjoL+TWYTlvvwf0OYwMz
 k7duMcNWcIOzBAm+swyaKvPQjoLcxtKYn+pSCxb1dzVkjzpelnjHctBNnfbvrNQt
 FCMs+t2azIZGkgNf9G1U/uV702/vKKYWrBc69/EB3osDxSRLKvM2sPqnScxmBR6q
 oohZ5pxbpDhO0gXc9s7AprUFf4puMEWw6eul3QPMzBAgZqh44iOv+yNvJk6pjG5L
 FwWkand4U2BVMGY3+dnBCeA8fsYq9owPCK8WN+5NI1W+CLMnKQFHK4iOEDbiaSHH
 PsgGrFnj5ArVxcmPKUQ3l2nWQcwXUvuBTxRmc707HNLt93y2JrdIncdSnhNR5PVk
 nlUNwTXCqfQmv0aY/yTDIzrgYfXXxhngaw59kEZXBPyO7rH7IcXZw6sq/scn8+G3
 Nd8lHLaFOAZwZVNU1hUWkow88t/NwkW/CZ2c2796pjsjAuJfBS1P+C4hkkUQ7+QB
 SavLg8S9E+Ienxacx2tZs8OdcAXsvlrHMeM0TTiWLbKPosDz3FbwbPeqlCpcVQAY
 kSPIXA+l1Dps0v8Yf6pdJCL1eX1jyzdfA+YKMT0aCPALTQYEPQXAE4Nced+qCZ52
 1vm6eTqDAf1KQfOmxxxT
 =dytt
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next

Pull hwmon updates from Guenter Roeck:
 "New driver for NCT6683D

  New chip support to existing drivers:
   - add support for STTS2004 and AT30TSE004 to jc42 driver
   - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver

  Other notable changes:
   - document hwmon kernel API
   - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
     tmp102 drivers to use new hwmon API functions
   - replace function macros in lm80, lm92, and jc42 drivers with real
     code
   - convert emc1403 driver to use regmap, add support for additional
     attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
   - various additional cleanup and minor bug fixes in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
  hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
  hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
  hwmon: (ultra45_env) Introduce managed version of kzalloc
  hwmon: Driver for NCT6683D
  hwmon: (lm80) Rearrange code to avoid forward declarations
  hwmon: (lm80) Convert fan display function macros into functions
  hwmon: (lm80) Convert voltage display function macros into functions
  hwmon: (lm80) Convert temperature display function macros into functions
  hwmon: (lm80) Normalize all temperature values to 16 bit
  hwmon: (lm80) Simplify TEMP_FROM_REG
  hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm83) Rearange code to avoid forward declarations
  hwmon: (lm83) Drop FSF address
  hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max1619) Drop function macros
  hwmon: (max1619) Rearrange code to avoid forward declarations
  hwmon: (max1619) Drop FSF address
  hwmon: (max1619) Fix critical alarm display
  hwmon: (jc42) Add support for STTS2004 and AT30TSE004
  hwmon: (jc42) Convert function macros into functions
  ...
2014-06-03 11:09:43 -07:00
Jean Delvare
0132514588 hwmon: Document temp[1-*]_min_hyst sysfs attribute
The temp[1-*]_min_hyst sysfs attribute is already implemented by 3
hwmon drivers (adt7x10, lm77 and lm92) but was missing from the
standard interface.

Also add temp[1-*]_lcrit_hyst for consistency, even though no driver
implement that one for the time being.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-05-25 17:23:07 +02:00
Guenter Roeck
41082d66bf hwmon: Driver for NCT6683D
Nuvoton NCT6683D is an eSIO with hardware monitoring capabilities.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:27 -07:00
Guenter Roeck
175c490c9e hwmon: (jc42) Add support for STTS2004 and AT30TSE004
Also fix links to datasheets for other supported sensors from
ST Microelectronics, and add links to several Atmel datasheets.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:25 -07:00
Guenter Roeck
84899d394e hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-only
All chips in this chip series only support a single hysteresis value. Having
multiple writable hysteresis attributes is therefore confusing, since a single
write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst)
read-only.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:24 -07:00
Guenter Roeck
57d60b1b7e hwmon: (emc1403) Add driver documentation
With the driver now supporting several chip variants,
it is about time to document what is supported.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck
a9622663e0 hwmon: Document hwmon kernel API
The hwmon subsystem has been around for a while. Time to document
its kernel API.

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck
50bf46509f hwmon: (lm77) Do not preserve hysteresis when updating critical temp limit
Updating the hysteresis value when updating the critical temperature limit
was following the rule of 'least surprise'. However, it had the undesirable
side effect of changing the hysteresis for all other attributes, which
defeats the purpose of least surprise. In addition, it could result in
invalid hysteresis values if the resulting hysteresis was too large. In such
cases the resulting hysteresis ended up changed anyway, which again defeats
the purpose. So drop that code and document the new behavior.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:20 -07:00
Linus Torvalds
3e76b749ea Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon updates from Jean Delvare:
 "This includes a number of driver conversions to
  devm_hwmon_device_register_with_groups, a few cleanups, and
  support for the ITE IT8623E"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (it87) Add support for IT8623E
  hwmon: (it87) Fix IT8603E define name
  hwmon: (lm90) Convert to use hwmon_device_register_with_groups
  hwmon: (lm90) Create all sysfs groups in one call
  hwmon: (lm90) Always use the dev variable in the probe function
  hwmon: (lm90) Create most optional attributes with sysfs_create_group
  hwmon: Avoid initializing the same field twice
  hwmon: (pc87360) Avoid initializing the same field twice
  hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Avoid initializing the same field twice
  hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Create all sysfs groups in one call
  hwmon: (lm63) Introduce 'dev' variable to point to client->dev
  hwmon: (lm63) Add additional sysfs group for temp2_type attribute
  hwmon: (f71805f) Fix author's address
2014-04-05 18:45:11 -07:00
Rudolf Marek
574e9bd8fa hwmon: (it87) Add support for IT8623E
Add support for the IT8623E found on Asus motherboards. It has same
hardware monitoring block as IT8603E.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04 18:01:35 +02:00
Aravind Gopalakrishnan
ec0159503a hwmon: (k10temp) Add support for AMD F16 M30h processor
Adding new PCI ID to support AMD F16 M30h processor (Mullins).
While at it, modify Kconfig and Doc files to reflect the
support for newer processors

Note: PCI ID for this processor will make it into pci_ids.h
as part of this patch:
http://marc.info/?l=linux-kernel&m=139291362126057&w=2
which should be pulled into 3.15 when merge window opens
(It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-02 22:09:14 -07:00
Guenter Roeck
f76992b00a hwmon: (pmbus/ltc2978) Add support for LTM4676
The chip's programming interface is quite similar to LTC3880
and supports the same set of sensors.

Reviewed-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-19 18:59:40 -07:00
Guenter Roeck
a41a8927e7 hwmon: (lm95245) Make temp2_crit_hyst read-only
The hysteresis register is shared among both temperature sensors.
This means changing one also affects the other. To avoid confusion,
established way to express this is to make only the first instance writable
and keep all other instances as read-only. Otherwise users may be
confused that changing the second writable value also affects the first,
while it is more obvious that a writable value may affect a different
read-only value.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03 08:01:06 -08:00