Commit Graph

2758 Commits

Author SHA1 Message Date
Arnaldo Carvalho de Melo
26252ea675 perf evlist: Show event attribute details
There was no easy way to see the frequency used, and with the change of
default, we better provide one.

[root@sandy linux]# perf evlist -F
cycles: sample_freq=4000
[root@sandy linux]# perf evlist -v
cycles: sample_freq=4000, size: 80, sample_type: 391, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
[root@sandy linux]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e1p9poez3nwrgycbmwqmhlsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 14:30:11 -03:00
Arnaldo Carvalho de Melo
447a6013e9 perf tools: Bump default sample freq to 4 kHz
Quoting Ingo:

"While at it I'd also suggest increasing the default sampling frequency,
from 1000 Hz per CPU to at least 4Khz auto-freq or so - this should work
well all across the board I think. CPUs are getting faster and command/app
run times are getting shorter, 1Khz is a bit low IMO."

Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2jafa6mkrufyekny9ei59lpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 13:14:18 -03:00
Stephane Eranian
299c345208 perf buildid-list: Work better with pipe mode
In order for perf buildid-list to work with pipe-mode files, it needs to
process buildids and event attr structs.

$ perf record -o - noploop 2 | ./perf inject -b | perf buildid-list -i - -H
noploop for 2 seconds
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.084 MB - (~3678 samples) ]
0000000000000000000000000000000000000000 [kernel.kallsyms]
3a0d0629efe74a8da3eeba372cdbd74ad9b8f5d5 /usr/local/bin/noploop

The reason [kernel.kallsyms] shows a 0 build-id comes from the
way buildids are injected in the stream.

The buildid for the kernel is provided by a BUILD_ID record. The
[kernel.kallsyms] is provided by a MMAP record. There is no clean and
obvious way to link the two, unfortunately.

In regular mode, the kernel buildid is generated from reading the ELF
image or kallsyms and perf knows to associate [kernel.kallsyms] to it.
Later on, when perf processes the [kernel.kallsyms] MMAP record, it will
already have a dso for it.

So for now, make sure perf buildid-list shows the buildids for
everything but the kernel image.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-6-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 13:03:54 -03:00
Stephane Eranian
444d286639 perf tools: Fix piped mode read code
In __perf_session__process_pipe_events(), there was a risk we would read
more than what a union perf_event struct can hold. this could happen in
case, perf is reading a file which contains new record types it does not
know about and which are larger than anything it knows about.

In general, perf is supposed to skip records it does not understand, but
in pipe mode, those have to be read and ignored.  The fixed size header
contains the size of the record, but that size may be larger than union
perf_event, yet it was used as the backing to the read in:

  union perf_event event;
  void *p;

  size = event->header.size;

  p = &event;
  p += sizeof(struct perf_event_header);
  if (size - sizeof(struct perf_event_header)) {
    err = readn(self->fd, p, size - sizeof(struct perf_event_header));

We fix this by allocating a buffer based on the size reported in the
header. We reuse the buffer as much as we can. We realloc in case it
becomes too small. In the  common case, the performance impact is
negligible.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:59:52 -03:00
Stephane Eranian
1a1ed1ba67 perf inject: Fix broken perf inject -b
perf inject -b was broken. It would not inject any build_id into the
stream. Furthermore, it would strip samples from the stream.

The reason was a missing initialization of the event attribute
structure. The perf_tool.tool.attr() callback was pointing to a simple
repipe. But there was no initialization of the internal data structures
to keep track of events and event ids. That later caused event id
lookups to fail, and sample would get removed.

The patch simply adds back the call to perf_event__process_attr() to
initialize the evlist structure and now build_ids are again injected.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:59:28 -03:00
Stephane Eranian
2eeaaa095d perf tools: rename HEADER_TRACE_INFO to HEADER_TRACING_DATA
To match the PERF_RECORD_HEADER_TRACING_DATA record type.

This is the same info as the one used for pipe mode whereas the other
one is for regular file output. This will help in the later patch to add
meta-data infos in pipe mode.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:57:46 -03:00
Jiri Olsa
6a11f92ef4 perf tools: Add union u64_swap type for swapping u64 data
The following union:
  union {
        u64 val64;
        u32 val32[2];
  } u;

is used on more than one place in perf code and will be used more in
upcomming patches.

Adding union u64_swap to have it defined globaly so we dont need to
redefine it all the time.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:50:25 -03:00
Jiri Olsa
e108c66e2c perf tools: Carry perf_event_attr bitfield throught different endians
When the perf data file is read cross architectures, the
perf_event__attr_swap function takes care about endianness of all the
struct fields except the bitfield flags.

The bitfield flags need to be transformed as well, since the bitfield
binary storage differs for both endians.

ABI says:
  Bit-fields are allocated from right to left (least to most significant)
  on little-endian implementations and from left to right (most to least
  significant) on big-endian implementations.

The above seems to be byte specific, so we need to reverse each byte of
the bitfield. 'Internet' also says this might be implementation specific
and we probably need proper fix and carry perf_event_attr bitfield flags
in separate data file FEAT_ section. Thought this seems to work for now.

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 2)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:48:24 -03:00
Anshuman Khandual
2e49a948be perf record: Fix documentation for branch stack sampling
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/4FB60C7A.2080508@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:47:45 -03:00
Linus Torvalds
25f3cdf87c ktest updates for 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPu3/5AAoJEIy3vGnGbaoAIT4QANDLTyuWKC79KAvKUrwMx31H
 BvlscjneZ77iEN0kF94CiEK93/oUkLt85e9qOOhb/sOPpidwlZ02WYmfKVK1zDPe
 z0Y37osgw9bx6Q1qkDI6RrLQScdRT18l0dOl0Zs+XBylO3VByOgd62TAQXoxObzu
 3qeAnpTkPSF+HJg5PVoNAd9GJkgS+WtdDdnQ4ILOwybLcokuP6bcM9AUM9UpFklg
 fOmAF/ywO9h5UD+4wsGHze99WZsk4czWZ7g9pgedyapRyFZY5BN3Cs+CI/+jD0wr
 c1S4/UdEatl2oDYJg9VrKregoQ+csAHlmv7odH4QCNX7/QCpjXMLIaYaD1/3Hfei
 SINMeMcS7thamQv5UjN76NAbK1Q1aI3M3gYdx3waiIkpTgWQlWtSBcsvA02bvUt9
 u8iYWIpmXcZ1OtglXRE8bdLcA4Ml8V1hnlB9E7go1XT8gfhuvV1rb5kc5vu8uyV0
 UNhyfwXpRqOXY/wwtIE/qiK9SSwzEleFYIvUdqhPRiSNn2eFNMJ8CERJSHbveKzS
 GEEKbHuK2MglyiMnfxvJxxJEpz4oMqpjXGUGJTAfBmTCJbsYIxhX6s8BwDh8oVLJ
 M1cVsiLBiAdpwXlDImWg49LHrCxFagBgTiSD/Znw5+Fz0qfpm5+qXKvO54L+foi2
 AR7vBvmm56VLZVnIy4nU
 =j1bI
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest updates from Steven Rostedt.

* tag 'ktest-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add README to explain what is in the examples directory
  ktest: Add the snowball.conf example config
  ktest: Add an example config that does cross compiling of several archs
  ktest: Add kvm.conf example config
  ktest: Add useful example configs
  ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config
  ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network
  ktest: Fix kernelrevision with POST_BUILD
2012-05-22 08:38:08 -07:00
Namhyung Kim
e40ee742d4 perf target: Add cpu flag to sample_type if target has cpu
Add PERF_SAMPLE_CPU flag into attr->sample_type if an user specified any
of cpu target (either system-wide or cpu list).

It will show correct values when cpu sort key is given for perf top and
perf report.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337564527-9367-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:37:12 -03:00
Namhyung Kim
e33387fc27 perf tools: Always try to build libtraceevent
Although perf depends on the libtraceevent, it cannot know when it needs
to be rebuilt. So just try to rebuild it always in order to make sure we
use the latest version.

While at it, silence annoying directory change messages.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:35:29 -03:00
Namhyung Kim
59f3bea53b perf tools: Rename libparsevent to libtraceevent in Makefile
Change some variable names according to new library name.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:34:52 -03:00
Frederic Weisbecker
8784eb7497 perf script: Rename struct event to struct event_format in perl engine
While migrating to the libtraceevent, the perl scripting engine
missed this structure rename.

This fixes:

     util/scripting-engines/trace-event-perl.c: In function "find_cache_event":
     util/scripting-engines/trace-event-perl.c:244: error: assignment from incompatible pointer type
     util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:250: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c: In function "perl_process_tracepoint":
     util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:307: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c: In function "perl_generate_script":
     util/scripting-engines/trace-event-perl.c:498: error: passing argument 1 of "trace_find_next_event" from incompatible pointer type
     util/scripting-engines/../trace-event.h:56: note: expected "struct event_format *" but argument is of type "struct event *"
     util/scripting-engines/trace-event-perl.c:498: error: assignment from incompatible pointer type
     util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:513: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:532: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:556: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:569: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:570: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:579: error: dereferencing pointer to incomplete type
     util/scripting-engines/trace-event-perl.c:580: error: dereferencing pointer to incomplete type

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:32:29 -03:00
Frederic Weisbecker
e326e75245 perf script: Explicitly handle known default print arg type
Handle the print argument types brought by the new libparsevent in perl
scripting engine.

PRINT_BSTRING and PRINT_DYNAMIC_ARRAY are treated just like strings
and thus don't require specific processing.

But PRINT_FUNC need specific plugins which are not yet handled, lets
warn if we meet this case.

This fixes:

     util/scripting-engines/trace-event-perl.c: In function define_event_symbol:
     util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_BSTRING not handled in switch
     util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_DYNAMIC_ARRAY not handled in switch
     util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_FUNC not handled in switch

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 12:31:26 -03:00
Jiri Olsa
6b5fc39bdd perf tools: Add hardcoded name term for pmu events
Adding a new hardcoded term 'name' allowing to specify a name for the
pmu event. The term is defined along with standard pmu terms. If no
'name' term is given, the event name follows following template:

    "raw 0x<perf_event_attr::config>"

running:
    perf stat -e cpu/config=1,name=krava1/u ls

will produce following output:
    ...
    Performance counter stats for 'ls':
                 0 krava1
    ...

running:
    perf stat -e cpu/config=1/u ls

will produce following output:
    ...
    Performance counter stats for 'ls':
                 0 raw 0x1
    ...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 11:47:54 -03:00
Jiri Olsa
08d2f762ac perf tools: Separate 'mem:' event scanner bits
Separating 'mem:' scanner processing, so we can parse out modifier
specifically and dont clash with other rules.

This is just precaution for the future, so we dont need to worry about
the rules clashing where we need to parse out any sub-rule of global
rules.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 11:24:04 -03:00
Jiri Olsa
b847cbdc67 perf tools: Use allocated list for each parsed event
Switch from using static temporary event list into dynamically allocated
one. This way we dont need to pass temp list to the parse_events_parse
which makes the interface more clear.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 11:22:28 -03:00
Jiri Olsa
82ba1f2f61 perf tools: Add support for displaying event parser debug info
Adding PARSER_DEBUG Makefile variable to enable building event scanner/
parser with debug enabled. This results in verbose output right out of
the scanner/parser.

It's useful for debuging the event parser. Keeping this only for event
parser so far.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 11:21:17 -03:00
Jiri Olsa
f50246e2e2 perf test: Move parse event automated tests to separated object
Moving event parsing specific tests into separated file:

  util/parse-events-test.c

Also changing the code a bit to ease running separate tests.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-22 11:19:16 -03:00
Steven Rostedt
24d0c03014 ktest: Add README to explain what is in the examples directory
Add a README that explains what the different example configs in the
ktest example directory are about.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:15:12 -04:00
Steven Rostedt
b6d300361b ktest: Add the snowball.conf example config
I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.

Here it is.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:13:32 -04:00
Steven Rostedt
2e10952622 ktest: Add an example config that does cross compiling of several archs
Add the config that I use to test several archs. I downloaded several
cross compilers from:

 http://kernel.org/pub/tools/crosstool/files/bin/x86_64/

and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:11:00 -04:00
Steven Rostedt
3a7bef7917 ktest: Add kvm.conf example config
Add an example config that explains how to use ktest with a virtual
guest as the target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:10:12 -04:00
Steven Rostedt
6d76f469c8 ktest: Add useful example configs
I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:08:30 -04:00
Steven Rostedt
43de3316e9 ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.

This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.

If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.

The default is that USE_OUTPUT_MIN_CONFIG is undefined.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:07:34 -04:00
Steven Rostedt
ccc513b688 ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network
Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default
is 'boot' which is what make_min_config has done previously: makes a
config file that is the minimum needed to boot the target.

But when MIN_CONFIG_TYPE is set to 'test', not only must the target
boot, but it must also successfully run the TEST. This allows the
creation of a config file that is the minimum to boot and also
perform ssh to the target, or anything else a developer wants.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
Ingo Molnar
73787190d0 Merge branch 'perf/parse-events-4' of git://github.com/fweisbec/tracing into perf/core
Conflicts:
	tools/perf/Makefile

This tree from Frederic unifies the perf and trace-cmd trace event format
parsing code into a single library.

Powertop and other tools will also be able to make use of it.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-21 10:42:09 +02:00
David S. Miller
17eea0df5f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-05-20 21:53:04 -04:00
David Ahern
5e1c81d98a perf evsel: Create events initially disabled -- again
764e16a changed perf-record to create events disabled by default and
enable them once perf initializations are done. This setting was dropped
by 0f82ebc. Now perf events are once again generated during perf's
initialization phase (e.g., generating maps).

As an example, perf opens a lot of files at startup. Unpatched:

perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.087 MB /tmp/perf.data (~3798 samples) ]

Using perf-script to look at the samples shows the perf command generating
563 of the 566 total events.

Patched:

perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.028 MB /tmp/perf.data (~1206 samples) ]

Using perf-script to look at the samples does not show perf command.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336968088-11531-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18 16:02:42 -03:00
Steven Rostedt
683a3e6481 ktest: Fix kernelrevision with POST_BUILD
The PRE_BUILD and POST_BUILD options of ktest are added to allow the
user to add temporary patch to the system and remove it on builds. This
is sometimes use to take a change from another git branch and add it to
a series without the fix so that this series can be tested, when an
unrelated bug exists in the series.

The problem comes when a tagged commit is being used. For example, if
v3.2 is being tested, and we add a patch to it, the kernelrelease for
that commit will be 3.2.0+, but without the patch the version will be
3.2.0. This can cause problems when the kernelrelease is determined for
creating the /lib/modules directory. The kernel booting has the '+' but
the module directory will not, and the modules will be missing for that
boot, and may not allow the kernel to succeed.

The fix is to put the creation of the kernelrelease in the POST_BUILD
logic, before it applies the POST_BUILD operation. The POST_BUILD is
where the patch may be removed, removing the '+' from the kernelrelease.

The calculation of the kernelrelease will also stay in its current
location but will be ignored if it was already calculated previously.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 14:27:51 -04:00
Arnaldo Carvalho de Melo
16ee6576e2 Merge remote-tracking branch 'tip/perf/urgent' into perf/core
Merge reason: We are going to queue up a dependent patch:

"perf tools: Move parse event automated tests to separated object"

That depends on:

commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing

Conflicts:
	tools/perf/builtin-stat.c

Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18 13:13:33 -03:00
Jiri Olsa
16fa7e8200 perf tools: Split term type into value type and term type
Introducing type_val and type_term for term instead of a single type
value. Currently the term type marked out the value type as well.

With this change we can have future string term values being specified
by user and translated into proper number along the processing.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1335371102-11358-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-18 12:15:32 -03:00
Jiri Olsa
a0187060f4 perf hists: Fix callchain ip printf format
The callchain address is stored as u64. Current code uses following
format string to display callchain address:

  "%p\n", (void *)(long)chain->ip

This way we lose upper 32 bits if we report 64 bit addresses in 32 bit
environment. Fixing this to always display whole 64 bits.

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 2)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-17 13:18:19 -03:00
Namhyung Kim
d1cb9fce92 perf target: Add uses_mmap field
If perf doesn't mmap on event (like perf stat), it should not create
per-task-per-cpu events. So just use a dummy cpu map to create a
per-task event for this case.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-3-git-send-email-namhyung.kim@lge.com
[ committer note: renamed .need_mmap to .uses_mmap ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-17 12:32:54 -03:00
Peter Zijlstra
8e7fbcbc22 sched: Remove stale power aware scheduling remnants and dysfunctional knobs
It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.

There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.

Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.

So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.

There is a proposal to replace the user interface with a single
3 state knob:

 sched_balance_policy := { performance, power, auto }

where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.

Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.

Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17 13:48:56 +02:00
Namhyung Kim
879d77d0cb Revert 'perf evlist: Fix creation of cpu map'
The commit 55261f4670 ("perf evlist: Fix creation of cpu map") changed
to create a per-task event when no cpu target is specified. However it
caused a problem since perf-task do not allow event inheritance due to
scalability issues so that the result will contain samples only from
parent, not from its children.

So we should use perf-task-per-cpu events anyway to get the right
result. Revert it.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Analysed-by: Ingo Molnar <mingo@kernel.org>
Acked-and-tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-16 12:12:05 -03:00
Namhyung Kim
aa22dd4990 perf target: Rename functions to avoid double negation
Rename perf_target__no_{cpu,task} to perf_target__has_{cpu,task} because
it's more intuitive and easy to parse (for human beings) when used with
negation.

The names are came out from David Ahern.  It is intended to be a
mechanical substitution without any functional change.

The perf_target__none remains unchanged since I couldn't find a right
name and it is hardly used with negation.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-16 12:09:34 -03:00
Du, ChangbinX
f6fe916ed0 USB: testusb: add path /dev/bus/usb to default search paths for usbfs
As real device-nodes managed by udev whose nodes lived in /dev/bus/usb
are mostly used today, let testusb tool use that directory as one default
path make tool be more convenient to use.

Signed-off-by: Du Changbin <changbinx.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15 08:41:13 -07:00
Arnaldo Carvalho de Melo
54e7a4e88e perf annotate browser: Add key bindings help window
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1txmtzf71eqie5xcukbfxors@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12 16:36:55 -03:00
Arnaldo Carvalho de Melo
2402e4a936 perf annotate browser: Show 'jumpy' functions
Just press 'J' and see how many places jump to jump targets.

The hottest jump target appears in red, targets with more than one
source have a different color than single source jump targets.

Suggested-by: Arjan van de Ven <arjan@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7452y0dmc02a20ooins7rn79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12 16:21:53 -03:00
Arnaldo Carvalho de Melo
7d5b12f5a0 perf annotate browser: Count the numbers of jump sources to a target
Instead of simply marking an offset as a jump target. So that we can
implement a new feature: showing "jumpy" targets, I.e. addresses that
lots of places jump to.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vc7b0u5yxgrubig0q61ayhxf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12 13:40:52 -03:00
Arnaldo Carvalho de Melo
c46219ac34 perf annotate: Introduce ->free() method in ins_ops
So that we don't special case disasm_line__free, allowing each
instruction class to provide an specialized destructor, like is needed
for 'lock'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xxw4vs5n077tf35jsvjzylhb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12 13:26:20 -03:00
Arnaldo Carvalho de Melo
7a997fe401 perf annotate: Augment lock instruction output
It just chops off the 'lock' and uses the ins__find, etc machinery to
call instruction specific parsers/beautifiers.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4913ba2dzakz5rivgumosqbh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-12 13:15:34 -03:00
Arnaldo Carvalho de Melo
a43712c472 perf annotate: Resolve symbols using objdump comment for single op ins
Starting with inc, incl, dec, decl.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jvh0jspefr5jyn0l7qko12st@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11 17:21:09 -03:00
Arnaldo Carvalho de Melo
6de783b6f5 perf annotate: Resolve symbols using objdump comment
This:

     mov    0x95bbb6(%rip),%ecx        # ffffffff81ae8d04 <d_hash_shift>

Becomes:

     mov    d_hash_shift,%ecx

Ditto for many more instructions that take two operands.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i5opbyai2x6mn9e5yjmhx9k6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11 17:19:20 -03:00
Srikar Dronamraju
73eff9f56e perf probe: Detect probe target when m/x options are absent
Options -m and -x explicitly allow tracing of modules / user space
binaries. In absense of these options, check if the first argument can
be used as a target.

perf probe /bin/zsh zfree is equivalent to perf probe -x /bin/zsh zfree.

Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120416120925.30661.40409.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11 13:58:53 -03:00
Srikar Dronamraju
225466f1c2 perf probe: Provide perf interface for uprobes
- Enhances perf to probe user space executables and libraries.
- Enhances -F/--funcs option of "perf probe" to list possible probe points in
  an executable file or library.
- Documents userspace probing support in perf.

[ Probing a function in the executable using function name  ]
perf probe -x /bin/zsh zfree

[ Probing a library function using function name ]
perf probe -x /lib64/libc.so.6 malloc

[ list probe-able functions in an executable ]
perf probe -F -x /bin/zsh

[ list probe-able functions in an library]
perf probe -F -x /lib/libc.so.6

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120416120909.30661.99781.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11 13:58:17 -03:00
Arnaldo Carvalho de Melo
e8ea156195 perf annotate: Use raw form for register indirect call instructions
callq  *0x10(%rax)

was being rendered in simplified mode as:

   callq  *10

I.e. hexa, but without the 0x and omitting the register. In such cases
just use the raw form.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-m91tv004h2m1fkfgu6ovx3hb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-11 12:28:55 -03:00
Ingo Molnar
5dcefda0fd Fixes and improvements for perf/core:
. perf_target: abstraction for --uid, --pid, --tid, --cpu, --all-cpus handling,
   eliminating code duplicated in the tools, having constraints that apply to
   all of them, from Namhyung Kim
 
 . Fixes for handling fallback to cpu-clock on PPC, from David Ahern
 
 . Fix for processing events with unknown size, from Jiri Olsa
 
 . Compilation fix on 32-bit, from Jiri Olsa
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJPq+zRAAoJENZQFvNTUqpAe9YP/2VuVQ8OcIS6h9NjdfdAc3y/
 RX2KDvnCaqa8YFIAl9OOWwy6G35mu8NEr3Lpzw2kkKvdUE0HYFUa91kF4DDLvG/w
 6gpWUtH+9jtnydkX4z11qi1a+Pfq0irc83oaDgfFNArZKdf080OxoCfzaxOjZ3fH
 zs4JR2L8TYYxIiWWWl0vMFic9+hTIM3dyFYJswHGy/ppqDX6DWfq4XndTi1gjo99
 dxT+hKUvIMDI6Ztdyafkvfvge47ooI3OCuPlvdQzPQlh5ZY/BSZMDhUVHPaBBAV3
 qQY6tCGPgk6sEIoNGf3juRSQyaGoo5V5zKgNFsAG5rsZqIpmlErJTeGMSGeOW3ww
 TIAOXBVij98c8iwuGPAKR3ZUuNxXHBTAo4Sq/DjRGJ8RKILVaYe6Sp5DOjaFA+3U
 374XGvEIqqYViNZm3gq1JfVAjJ4179hk7K+zUK55IeSgsEnwQ9s379dIpwaxCtL4
 4Sb0FqyVbx7joo8NfLokXqblcBa/MRECrtVbHHEWuygzuV2Au437mOLOiTSGyyZr
 N6FsDNFUcx044QZAYsAcbAXIxE+DssOcEERiFD1gG8MoUohW/DnpbMMaQi9bfUSi
 b8SgFIpy9q9LlADRFYUZ+rVs4B9RCJNMtaa2UpcaRuUcXHrqZEWzxbPbSDjCbl4G
 /yoSHxH5QJu6bkYz5deW
 =ZZUs
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Fixes and improvements for perf/core:

- perf_target: abstraction for --uid, --pid, --tid, --cpu, --all-cpus handling,
  eliminating code duplicated in the tools, having constraints that apply to
  all of them, from Namhyung Kim

- Fixes for handling fallback to cpu-clock on PPC, from David Ahern

- Fix for processing events with unknown size, from Jiri Olsa

- Compilation fix on 32-bit, from Jiri Olsa

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-11 08:13:55 +02:00
Arnaldo Carvalho de Melo
5a5626b1b4 perf hists browser: Use '/' for search/filter instead of 's'
That is what is used in vi and mutt, and as well on the 'annotate'
browser.

Eventually we can have keymappings to make people used to other key
associations more confortable.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fyln9286b8gx5q4n277l0djs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-10 13:07:59 -03:00
David Ahern
20d23aaa31 perf stat: handle ENXIO error for perf_event_open
perf stat on PPC currently fails to run:

$ perf stat -- sleep 1
  Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.

...

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 14:14:41 -03:00
David Ahern
f6c1be2711 perf annotate: shorten helpline so it fits in visible space
Additional toggles have pushed the help line out of view on a modestly
sized terminal (120 columns wide). Shorten it to just reminders.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336510879-64610-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 12:02:36 -03:00
David Ahern
d1cae34d6f perf record: Reset event name when falling back to cpu-clock
perf-record defaults to the H/W cycles event and if it is not supported
falls back to cpu-clock. Reset the event name as well.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495811-58461-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 12:02:10 -03:00
David Ahern
40491eaa46 perf top: Update event name when falling back to cpu-clock
The 'perf top' command falls back to cpu-clock if the H/W cycles event
is not supported, but the event name is not updated leading to a
misleading header:

PerfTop: 8 irqs/sec  kernel:75.0%  exact:  0.0% [1000Hz cycles],  ...

Update the event name when the event type is changed so that the
header displays correctly:

PerfTop: 794 irqs/sec  kernel:100.0%  exact:  0.0% [1000Hz cpu-clock], ...

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495789-58420-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 12:01:57 -03:00
David Ahern
979987a567 perf stat: handle ENXIO error for perf_event_open
perf stat on PPC currently fails to run:

$ perf stat -- sleep 1
  Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.

...

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 11:58:48 -03:00
David Ahern
028d455b12 perf record: Fix fallback to cpu-clock on ppc
perf-record on PPC is not falling back to cpu-clock:

$ perf record -ag -fo /tmp/perf.data -- sleep 1

  Error: sys_perf_event_open() syscall returned with 6 (No such device or address).  /bin/dmesg may provide additional information.

  Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?

The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf record -ag -fo /tmp/perf.data -v -- sleep 1
Old kernel, cannot exclude guest or host samples.
The cycles event is not supported, trying to fall back to cpu-clock-ticks
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.151 MB /tmp/perf.data (~6592 samples) ]

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490937-57106-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 11:57:29 -03:00
Jiri Olsa
04480d0110 perf report: Fix format string for x86-32 compilation
Using PRIu64 for printing out u64 nr_events to fix compilation
for x86 32 bits.

Cc: Arun Sharma <asharma@fb.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank C. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1335958638-5160-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-09 11:27:08 -03:00
Ingo Molnar
149936a068 Merge branch 'perf/annotate' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Perf annotate browser improvements:

 - Get back the line separating the overheads from the disassembly, requested by
   Peter Zijlstra, Linus agreed now that it is a solid line and more column real
   state was harvested. Also it has the jump->arrow lines separated from it by
   the address/jump target column.

 - Don't change asm line color when toggling source code view. Requested by
   Peter Zijlstra.

Current snapshot:

 avtab_search_node
        │      push   %rbp
        │      mov    %rsp,%rbp
        │    → callq  mcount
        │      movzwl 0x6(%rsi),%edx
        │      and    $0x7fff,%dx
        │      test   %rdi,%rdi
        │    ↓ jne    20
   0.42 │17:┌─→xor    %eax,%eax
        │19:│  leaveq
   0.42 │   │← retq
        │   │  nopl   0x0(%rax,%rax,1)
        │20:│  mov    (%rdi),%rax
   0.08 │   │  test   %rax,%rax
        │   └──je     17
        │      movzwl (%rsi),%ecx
        │      movzwl 0x2(%rsi),%r9d
        │      movzwl 0x4(%rsi),%r8d
        │      movzwl %cx,%esi
        │      movzwl %r9w,%r10d
        │      shl    $0x9,%esi
        │      lea    (%rsi,%r10,4),%esi
        │      lea    (%r8,%rsi,1),%esi
        │      and    0x10(%rdi),%si
        │      movzwl %si,%esi
        │      mov    (%rax,%rsi,8),%rax
   1.01 │      test   %rax,%rax
        │    ↑ je     19
        │      nopw   0x0(%rax,%rax,1)
   3.19 │60:   cmp    %cx,(%rax)
        │    ↓ jne    7e
   0.08 │      cmp    %r9w,0x2(%rax)
        │    ↓ jne    7e
        │      cmp    %r8w,0x4(%rax)
        │    ↓ jne    79
        │      test   %dx,0x6(%rax)
        │    ↑ jne    19
        │79:   cmp    %r8w,0x4(%rax)
  83.45 │7e: ↑ ja     17
   3.36 │      mov    0x10(%rax),%rax
   7.98 │      test   %rax,%rax
        │    ↑ jne    60
        │      leaveq
        │    ← retq

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08 16:55:15 +02:00
Arnaldo Carvalho de Melo
80eebd94d2 perf top: Default to system wide using perf_target methods
Additionally we were not checking if a cpu list had been provided by the
user. Fix that.

Reported-by: David Ahern <dsahern@gmail.com>
Reported-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ao3zrouylwmt7h9ikj0krubi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-08 10:47:09 -03:00
David S. Miller
0d6c4a2e46 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/e1000e/param.c
	drivers/net/wireless/iwlwifi/iwl-agn-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans.h

Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell.  In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.

In e1000e a conflict arose in the validation code for settings of
adapter->itr.  'net-next' had more sophisticated logic so that
logic was used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:35:40 -04:00
Matthias Fend
eb9c583638 USB: ffs-test: fix length argument of out function call
The out functions should only handle actual available data instead of the complete buffer.
Otherwise for example the ep0_consume function will report ghost events since it tries to decode
the complete buffer - which may contain partly invalid data.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 16:45:48 -07:00
Arnaldo Carvalho de Melo
b9818e9375 perf annotate browser: Compact 'nop' output
Just suppress the nop operands, future infrastructure that will record
the instruction lenght (and its contents) in struct ins will allow
rendering them as nopN, i.e. nop5 for a 5-byte nop.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qddbeglfzqdlal8vj2yaj67y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 19:00:42 -03:00
Arnaldo Carvalho de Melo
5417072bf6 perf annotate browser: Do raw printing in 'o'ffset in a single place
Instead of doing the same in all ins scnprintf methods.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8mfairi2n1nentoa852alazv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 18:54:16 -03:00
Namhyung Kim
77a6f014e9 perf stat: Use perf_evlist__create_maps
Use same function with perf record and top to share the code checks
combinations of different switches.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-8-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 17:52:22 -03:00
Namhyung Kim
d67356e7f8 perf target: Consolidate target task/cpu checking
There are places that check whether target task/cpu is given or not and
some of them didn't check newly introduced uid or cpu list. Add and use
three of helper functions to treat them properly.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 17:52:05 -03:00
Namhyung Kim
16ad2ffb82 perf tools: Introduce perf_target__strerror()
The perf_target__strerror() sets @buf to a string that describes the
(perf_target-specific) error condition that is passed via @errnum.

This is similar to strerror_r() and does same thing if @errnum has a
standard errno value.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-6-git-send-email-namhyung.kim@lge.com
[ committer note: No need to use PERF_ERRNO_TARGET__SUCCESS, use shorter idiom ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 17:30:21 -03:00
Namhyung Kim
dfe78adaac perf target: Introduce perf_target__parse_uid()
Add and use the modern perf_target__parse_uid() and get rid of the old
parse_target_uid().

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 16:46:48 -03:00
Namhyung Kim
60bbddaaa3 perf target: Introduce perf_target_errno
The perf_target_errno enumerations are used to indicate specific error
cases on perf target operations. It'd help libperf being a more generic
library.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 16:46:35 -03:00
Namhyung Kim
55261f4670 perf evlist: Fix creation of cpu map
Currently, 'perf record -- sleep 1' creates a cpu map for all online
cpus since it turns out calling cpu_map__new(NULL). Fix it.

Also it is guaranteed that cpu_list is NULL if PID/TID is given by
calling perf_target__validate(), so we can make the conditional bit
simpler.

This also fixes perf test 7 (Validate) failure on my 6 core machine:

  $ cat /sys/devices/system/cpu/online
  0-11
  $ ./perf test -v 7
   7: Validate PERF_RECORD_* events & perf_sample fields:
  --- start ---
  perf_evlist__mmap: Operation not permitted
  ---- end ----
  Validate PERF_RECORD_* events & perf_sample fields: FAILED!

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 16:46:21 -03:00
Arnaldo Carvalho de Melo
10b47d5415 perf top: Set target.system_wide
Check if neither of --pid, --tid or --uid was specified and if so, set
system_wide appropriately.

Namhyung's patch would make using any of the above target specifiers
emit a warning in perf_target__validate, since it would see
target.system_wide set and one of the others as well.

So set system_wide after validation.

Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6e4zrji1uw0rinfyoitl0wi4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-07 16:46:03 -03:00
Greg Kroah-Hartman
09c0211c0b perf: Turn off compiler warnings for flex and bison generated files
We don't know what types of warnings different versions of flex
and bison combined with different versions of gcc is going to
generate, so just punt and don't warn about anything.

This fixes the build of perf for me on an openSUSE 12.1 system.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20120504183254.GA11154@kroah.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 10:03:01 +02:00
Jiri Olsa
9389a46043 perf session: Fail on processing event with unknown size
Currently if we cannot decide the size of the event, we guess next
event possition by:
  "... check alignment, and increment a single u64 in the hope
  to catch on again 'soon'"

This usually ends up with segfault or endless loop. It's better
to admit the failure right away, then pretend nothing happened.
It makes the life easier ;)

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120416184251.GA11503@m.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-04 11:53:22 -03:00
Arnaldo Carvalho de Melo
64aa17ca5a perf annotate browser: Don't change the asm line color when toggling source
Gets confusing. Remains to be chosen an appropriate different color for
source code.

This effectively reverts 58e817d997 ("perf annotate: Print asm code as
blue when source code is displayed")

Requested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qy9iq32nj3uqe5dbiuq9e3j9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-03 13:23:00 -03:00
Arnaldo Carvalho de Melo
83b1f2aad4 perf annotate browser: More clearly separate columns
The first column (columns in the near future) are for the per line event
overhead(s), that only appear when they are not zero.

To clearly separate it, add back a solid vertical line, with just one
colour, not influenced by the per line overheads.

Then have the addr/offset column, then optionally the dynamic
(static in the future) jump->target arrows, if 'j' enables it.

Then the instructions.

Requested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r415t4sps0oyr9y8kd9j7clz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-03 13:12:49 -03:00
Arnaldo Carvalho de Melo
4656cca11b perf ui browser: Introduce routine to draw vertical line
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-umb4jlu0ee8r2rc3x4jkahgk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-03 13:07:05 -03:00
Namhyung Kim
dc41b9b8f0 perf ui: Change fallback policy of setup_browser()
If gtk2 support is not enabled (or failed for some reason) try TUI again
instead of falling directly back to the stdio interface.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 16:17:37 -03:00
Namhyung Kim
281ef544a8 perf ui: Add gtk2 support into setup_browser()
Now setup_browser can handle gtk2 front-end so split the TUI code to
ui/tui/setup.c in order to remove dependency.

To this end, make ui__init/exit global symbols and take an argument.
Also split gtk code to ui/gtk/setup.c.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 16:17:34 -03:00
Namhyung Kim
28e62b90d9 perf ui gtk: Rename functions for consistency
We use double underscore characters to distinguish its subsystem and
actual function name.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 16:17:28 -03:00
Namhyung Kim
7706f96632 perf ui gtk: Drop arg[cv] arguments from perf_gtk_setup_browser()
As perf doesn't allow to specify gtk command-line option, drop the
arguments and pass NULL to gtk_init().

This makes the function easier to be called from setup_browser().

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 16:17:25 -03:00
Namhyung Kim
ca09b2e1b3 perf ui: Make setup_browser() generic
The setup_browser contained newt-related codes in it.

As gtk front-end added recently, it should be more generic to handle
both cases properly.

So move newt codes to the ui__init() for now.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 16:17:20 -03:00
Namhyung Kim
12864b3158 perf target: Split out perf_target handling code
For further work on perf_target, it'd be better off splitting the code
into a separate file.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-9-git-send-email-namhyung.kim@lge.com
[ committer note: Fixed perl build by using stdbool and types.h in target.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:41:11 -03:00
Namhyung Kim
770a34a38b perf tools: Check more combinations of PID/TID, UID and CPU switches
There were some combinations of these switches that are not so
appropriate IMHO.

Since there are implicit priorities between them and they worked well
anyway, but it ends up opening useless duplicated events.

For example, 'perf stat -t <pid> -a' will open multiple events for the
thread instead of one.

Add explicit checks and warn user in perf_target__validate().

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:24:14 -03:00
Namhyung Kim
b809ac100e perf evlist: Make create_maps() take struct perf_target
Now we have all information that needed to create cpu/thread maps in
struct perf_target, it'd be better using it as an argument.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:23:11 -03:00
Namhyung Kim
4bd0f2d2c0 perf tools: Introduce perf_target__validate() helper
The perf_target__validate function is used to check given PID/TID/UID/CPU
target options and warn if some combination is impossible. Also this can
make some arguments of parse_target_uid() function useless as it is checked
before the call via our new helper.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:22:08 -03:00
Namhyung Kim
fe9d18a71d perf top: Convert to struct perf_target
Use struct perf_target as it is introduced by previous patch.

This is a preparation of further changes.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:20:30 -03:00
Namhyung Kim
20f946b4a4 perf stat: Convert to struct perf_target
Use struct perf_target as it is introduced by previous patch.

This is a preparation of further changes.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:19:17 -03:00
Namhyung Kim
bea0340582 perf tools: Introduce struct perf_target
The perf_target struct will be used for taking care of cpu/thread maps
based on user's input. Since it is used on various subcommands it'd
better factoring it out.

Thanks to Arnaldo for suggesting the better name.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:17:58 -03:00
Robert Richter
c651214e90 perf tools: Fix include header files in util/parse-events.h
Include header fixes for

... bool:

 util/parse-events.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘have_tracepoints’

... and types.h:

 util/parse-events.h:28: error: expected ‘)’ before ‘config’
 util/parse-events.h:34: error: expected declaration specifiers or ‘...’ before ‘u64’
 util/parse-events.h:45: error: expected ‘)’ before ‘type’

This happens if now other include files are included before
util/parse-events.h.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:14:35 -03:00
Arnaldo Carvalho de Melo
23080e4cd2 perf test: Make the rdpmc test honour 'verbose' mode
It was unconditionally printing debug stuff when in non -v mode we
should just print the name and result of the test.

Now:

[root@sandy ~]# perf test rdpmc
 6: x86 rdpmc test: Ok
[root@sandy ~]# perf test -v rdpmc
 6: x86 rdpmc test:
--- start ---
             0:           6030
             1:          60030
             2:         600050
             3:        6000056
             4:       60000070
             5:      600000266
   ---- end ----
x86 rdpmc test: Ok
[root@sandy ~]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0tjedaozsy9oarq30nvzg74b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-02 15:14:12 -03:00
Ingo Molnar
4c85703626 Fixes for perf/urgent:
. Add fallback in 'perf stat' for kernels that don't support
   perf_event_attr.exclude_guest, from Stephane Eranian.
 
 . Fix build id cache add routine to take the size of the buffer and not of a
   pointer, from Namhyung Kim.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJPoU1uAAoJENZQFvNTUqpABnwP/j4rbDJ+3Ck+L5npAWCKbBCn
 g2ubvySCDEbwNBQCUDRUdk7I8Man1NJwKgf/zojpYT/9891pH6ADdWWtxhNjfinl
 QcjrbZDyHflO8BlcXRs0JpVCiSei4FSFXTPPjWPgSu0iCj8xlob3+/OKnrYQvwOQ
 8niRXzh5CWngFfpG3nT0kIehlvAYpvwAOcZz6X0fFXpuv/Ws8HY3NdMOYkYVvMjg
 KRMqjPz80tESM4gDw3V/MmX2M8TBDwrRlH0FZVX1tM790UxcxMHrXoeuUej+Y3ka
 qNzWv2zuv4LcpAyeCCwLvTTcjQ1Cd08LHve46enxjNZESrHZJjs+Bs/TXiQqemYe
 p6qkoDK590PYxA8C/cTVgN5Di9ELEES7bDllaTcezZrLFztnONMXwwWEPiHRCkMz
 +YOBJoCKJ7YX7rGREpn/H52wp5Dc8YFGJKXyO4+1NjbX2irOYFNXuD/YM8W2Rxp0
 H99gwwKgJ5BK3ggxI+XJl8n/4nrEMRysnbwonEmeouffoK85aG7Oo4WUWdx2ZXn7
 I5EJajXLSWzjOvIqoxqbmcWgwpr20fTdl0d5+ML+M1KYB/A4xb0HBk2R9u91nHXi
 QTO1jt2YLlq49jqnjAj1O+X5sRLsJOpxhqQ94AU/gujgkktRHXdzeIJ6oUbTiDT0
 zKH1qEhGTJV8KePgu+ph
 =ixC8
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Fixes for perf/urgent:

- Add fallback in 'perf stat' for kernels that don't support
  perf_event_attr.exclude_guest, from Stephane Eranian.

- Fix build id cache add routine to take the size of the buffer and not of a
  pointer, from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-02 19:33:34 +02:00
Michael S. Tsirkin
64d098886e virtio/tools: add delayed interupt mode
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-02 18:22:14 +03:00
Linus Torvalds
b821861b90 Two bug fixes in ktest to be merged.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPoILhAAoJEIy3vGnGbaoAYv8QAM51OcJQHH6cTrV9PJ704hNw
 J/EdZ0yGNClsNGNclhSJBgeyZrOenvJs5gV+RcCFQzSYIacbF+0idwTw2odq/00h
 jCJrfdHEFN+v94FnmYMEjH6tAzfHKAv9nQ/vL7vpV9s1CeGFJOwDObxazJVs+axA
 E/190qbpsfDw9VQ8tRVc9/wbf8lkWAzn9bS8+kdM0usUOuYvSWGeR5s2XUDHiZTr
 t1moVVk5fwcQjYK3+CrUiVIdffPx7Wdl+0au9FLhk4gIlJuKq3G+W+EbmzAedWjS
 TM85TIgl+Qb4F/pPlUP1AWCOtHAs4B0svBl9kEdIh45HPOMiCOdp3S/n5cQhEUnE
 iOavOeOZmntgVnPvTq4QP1vipvsAkrMp1HpGF+XIiMS+y9gcuSVJ1o+WFTKdTtqP
 aeRlFG4TMekSTZI5uddhazwLCUmHkXkI7xm4WGtDwF5cZt7IPt0XPld2KbvO+u8L
 BrqipM9c3Om8N5atgxZBNzAgC4ieAAdapOeuHQY7+Gn31emNFp9WPxWHfGCTFcAb
 rmyaw3qHjrdLgHQcJQn/ruodQuDagTfP2KNxNayibUzpBzH/9YwzCgIX0mAPc9tC
 hl3s0SJAC3Ry9diTsuMvSEmQ+aZHcz1/7Tu8x2+p1KVYoJJUvULrE1oWjkG6lo2P
 2tLSVvxUmy1pU9Q2gYgx
 =BNz+
 -----END PGP SIGNATURE-----

Merge tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull two bug fixes in ktest from Steven Rostedt.

* tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix reboot on success stopping all reboots
  ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP
2012-05-01 19:43:34 -07:00
Stephane Eranian
5622c07b47 perf stat: Fix case where guest/host monitoring is not supported by kernel
By default, perf stat sets exclude_guest = 1. But when you run perf on a
kernel which does not support  host/guest filtering, then you get an
error saying the event in unsupported. This comes from the fact that
when the perf_event_attr struct passed by the user is larger than the
one known to the kernel there is safety check which ensures that all
unknown bits are zero. But here, exclude_guest is 1 (part of the unknown
bits) and thus the perf_event_open() syscall return EINVAL.

To my surprise, running perf record on the same kernel did not exhibit
the problem. The reason is that perf record handles the problem by
catching the error and retrying with guest/host excludes set to zero.
For some reason, this was not done with perf stat. This patch fixes this
problem.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/20120427124538.GA7230@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-01 14:20:00 -03:00
Namhyung Kim
afda0f9448 perf build-id: Fix filename size calculation
The filename is a pointer variable so the sizeof(filename) will return
length of a pointer. Fix it by using 'size'.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335881976-3282-1-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-01 14:13:00 -03:00
Steven Rostedt
759a3cc625 ktest: Fix reboot on success stopping all reboots
The change to let individual tests decide to reboot the machine on
success of the entire test also prevented errors from rebooting
when an error was detected.

The "no_reboot" variable was only cleared if the test had
reboot_on_success set. But the no_reboot variable also prevents the test
rebooting when an error was detected even when REBOOT_ON_ERROR was set.

Add a new "reboot_success" variable that is used to determine if the
test should reboot on success and not touch the no_reboot variable.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:25:48 -04:00
Russ Dill
5158ba3ea7 ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test
testing, build failures are treated as boot or test failures and
'git bisect bad' is executed instead of 'git bisect skip'. This is because
the $ret value of -1 is treated as a build failure, but the $reverse_bisect
logic does not properly handle this.

Simple fix, only invert it if it is positive.

Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:25:44 -04:00
Arnaldo Carvalho de Melo
0822cc80d9 perf annotate browser: Don't display 0.00 percentages
Cleaning up more the output.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-81pimnsnaa9y2j0a9plstu1c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-27 17:13:53 -03:00
Arnaldo Carvalho de Melo
3e8b5ddf17 perf annotate browser: Remove the vertical line after the percentages
It is confusing when used with jump -> target lines.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xeiyfsxptwtmlvowledg6wpy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-27 16:44:56 -03:00
Arnaldo Carvalho de Melo
9d1ef56d57 perf annotate browser: Show current jump, back or forward
Instead of trying to show the current loop by naively looking for the
next backward jump, just use 'j' to toggle showing arrows connecting
jump with its target.

And do it for forward jumps as well.

Loop detection requires more code to follow the flow control, etc.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-soahcn1lz2u4wxj31ch0594j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-27 16:35:29 -03:00
Arnaldo Carvalho de Melo
944e1abed9 perf ui browser: Add method to draw up/down arrow line
It figures out the direction and draws downwards arrows too if that is
the case.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tg329nr7q4dg9d0tl3o0wywg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-27 16:27:52 -03:00
Arnaldo Carvalho de Melo
88298f5a52 perf annotate browser: Add a right arrow before call instructions
The counterpart of 'ret' instructions.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jlz2ldaquaow0rqi2vr4b91l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-27 15:10:54 -03:00
Ingo Molnar
1fa2e84db3 Fixes on top of the previous perf/annotate pull request
. Sometimes a jump points to an offset with no instructions, make the
   mark jump targets function handle that, for now just ignoring such
   jump targets, more investigation is needed to figure out how to cope
   with that.
 
 . Handle jump targets that are outside the function, for now just don't
   try to draw the connector arrow, right thing seems to be to mark this
   jump with a -> (right arrow) and handle it like a callq.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJPmWGLAAoJENZQFvNTUqpAPwYP/1HLjBtDkh9IvyQdixHQsrsK
 D3SUajTPYVOwUMMtLKerpcEWgl8TvyBYiciYDTlVF3vPkIifKPV6VC3AUWfPuuOq
 RRZK8fwTiU8SBzBs0TbDs3uSMUh6HyICd8NrsCKVvydtAvtCErIPFZYQRcUbsLcS
 i5om0HTyeDUmvGMFZldrpu7rkaM5VoWp5cMCUFLHOFxg4b3dZV5Xuejn3M4vrtnN
 UNH5Koy6jBb+B9Y1QV28PUxs56nab2n+/04ruvGVwcpxjk939/eZKTxda4VkeRZs
 rev4yh9yf3xnvnDC2T/6hNM+gaapsSx5ho26qjh2Wn1Ty3OOlNo0dl5OygNCF0iX
 W0XrBzCh8O5V7Wyd8enY94tt97S8OYUhQmNXz1ee+1C284+vWNteIIhHK7MKOWn4
 Xy0RGU4qLQCKX/xZFmlRhlyoil5lS7R/zVUoimOaI3P4cjqsXHFZ+PT+8QkHu6Wk
 nisD2XX/v/gdkNuZ5ItW/gseAulp9JdvzHzTcrfPBnG+z1NqOvnPTmW3tlnvqmsb
 S4S0try6tbH2hBblP5Z4n7LiEudiD0tsdvqbnD0FvyhCTJkSP84q7rP6tUpqmLbH
 4EbRBRNQafjN08c4kZk8085C86iKSMQ0LKOJ+TOjJLsEHZzYtghNgOOVktKrnh8r
 n6cLlI0wE2iYFhZ92Oc9
 =NPh2
 -----END PGP SIGNATURE-----

Merge tag 'perf-annotate-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Annotation improvements:

Now the default annotate browser uses a much more compact format, implementing
suggestions made made by several people, notably Linus.

Here is part of the new __list_del_entry() annotation:

__list_del_entry
    8.47 │      push   %rbp
    8.47 │      mov    (%rdi),%rdx
   20.34 │      mov    $0xdead000000100100,%rcx
    3.39 │      mov    0x8(%rdi),%rax
    0.00 │      mov    %rsp,%rbp
    1.69 │      cmp    %rcx,%rdx
    0.00 │      je     43
    1.69 │      mov    $0xdead000000200200,%rcx
    3.39 │      cmp    %rcx,%rax
    0.00 │      je     a3
    5.08 │      mov    (%rax),%r8
   18.64 │      cmp    %r8,%rdi
    0.00 │      jne    84
    1.69 │      mov    0x8(%rdx),%r8
   25.42 │      cmp    %r8,%rdi
    0.00 │      jne    65
    1.69 │      mov    %rax,0x8(%rdx)
    0.00 │      mov    %rdx,(%rax)
    0.00 │      leaveq
    0.00 │      retq
    0.00 │ 43:  mov    %rdx,%r8
    0.00 │      mov    %rdi,%rcx
    0.00 │      mov    $0xffffffff817cd6a8,%rdx
    0.00 │      mov    $0x31,%esi
    0.00 │      mov    $0xffffffff817cd6e0,%rdi
    0.00 │      xor    %eax,%eax
    0.00 │      callq  ffffffff8104eab0 <warn_slowpath_fmt>
    0.00 │      leaveq
    0.00 │      retq
    0.00 │ 65:  mov    %rdi,%rcx
    0.00 │      mov    $0xffffffff817cd780,%rdx
    0.00 │      mov    $0x3a,%esi
    0.00 │      mov    $0xffffffff817cd6e0,%rdi
    0.00 │      xor    %eax,%eax
    0.00 │      callq  ffffffff8104eab0 <warn_slowpath_fmt>
    0.00 │      leaveq
    0.00 │      retq

The infrastructure is there to provide formatters for any instruction,
like the one I'll do for call functions to elide the address.

Further fixes on top of the first iteration:

- Sometimes a jump points to an offset with no instructions, make the
  mark jump targets function handle that, for now just ignoring such
  jump targets, more investigation is needed to figure out how to cope
  with that.

- Handle jump targets that are outside the function, for now just don't
  try to draw the connector arrow, right thing seems to be to mark this
  jump with a -> (right arrow) and handle it like a callq.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-27 09:00:50 +02:00
Arnaldo Carvalho de Melo
38b31bd0ce perf annotate browser: Don't draw jump connectors for out of function jumps
As described in the previous patch. Next step is to properly label those
jumps by using a -> arrow, i.e. not backwards/forwards, and allow the
user to navigate to this other function when enter or -> is pressed.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ax2sss463eu88wgl9ee8a6b6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-25 14:18:42 -03:00
Arnaldo Carvalho de Melo
fb29fa58e3 perf annotate: Mark jump instructions with no offset
I.e. jumps that go to code outside the current function, that is denoted
in objdump -dS as:

   399f877a9f: jne    399f87bcf4 <_L_lock_5154>

I.e. without the + after the name of the current function, like in:

   399f877aa5: jmp    399f877ab2 <_int_free+0x412>

The browser will use that info to avoid drawing connectors to the start
of the function, since ops.target.addr was zero.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xrn35g2mlawz1ydo1p73w3q6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-25 14:16:03 -03:00
Steven Rostedt
1c698186ab parse-events: Rename struct record to struct pevent_record
As libtraceevent will be a library, having struct record is far
too generic of a name to use. Renaming it to be consistent with the
rest of the functions will be a better long term solution.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:48 +02:00
Steven Rostedt
42c80139ea parse-event: Fix memset pointer size bug in handle
Fix memset(ptr, 0, sizeof(ptr)) to memset(ptr, 0, sizeof(*ptr))

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:44 +02:00
Steven Rostedt
2e7a5fc8d4 parse-events: Allow '*' and '/' operations in TP_printk
Add multiply and divide operations in the printk format.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:41 +02:00
Vaibhav Nagarnaik
b48285980d parse-events: Support '+' opcode in print format
The '+' opcode is not supported in the arguments for the print format.
This patch adds support for it.

Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/1310785241-3799-4-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:38 +02:00
Steven Rostedt
a2525a0852 parse-events: Let pevent_free() take a NULL pointer
The pevent_free() should ack like other free()s and allow a
NULL pointer to be passed to it which makes error handling a bit
easier for the users of pevent_free().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:35 +02:00
Vaibhav Nagarnaik
14ffde0e96 parse-events: Handle opcode parsing error
If an invalid opcode is encountered in parsing event print format, the
trace-cmd calls exit() without parsing any other events.

This patch adds handling for such an error where the get_op_prio() is
called. If the return value is -1, then the event print format parsing
is skipped and parsing continues.

Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/1311619257-4970-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:32 +02:00
Vaibhav Nagarnaik
d69afed55b parse-events: Handle invalid opcode parsing gracefully
If an invalid opcode is encountered, trace-cmd exits with an error.
Instead it can be treated as a soft error where the event's print format
is not parsed and its binary data is dumped out.

This patch adds a return value to arg_num_eval() function to indicate if
the parsing was successful. If not, then the error is considered soft
and the parsing of the offending event fails.

Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/1310785241-3799-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:28 +02:00
Julia Lawall
54a3625829 perf/events: Correct size given to memset
This is a forward port of commit 5660ce3424
perf tools: Correct size given to memset
written by Julia Lawall and forward ported by Steven Rostedt.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:25 +02:00
Tom Zanussi
5205aec960 perf/events: Add flag/symbol format_flags
This is a port of commit eb9a42caa7
 perf trace: Add flag/symbolic format_flags
of the old trace-event-parse.c to the new event-parse.c that
was written by Tom Zanussi and forward ported by Steven Rostedt.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:22 +02:00
Steven Rostedt
4dc1024a7a perf/events: Add flag to produce nsec output
libtraceevent library prints out in usecs but perf wants to print out
in nsecs. Add a flag that lets the user decide to print out in usec
or nsec times.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:35:18 +02:00
Steven Rostedt
aaf045f723 perf: Have perf use the new libtraceevent.a library
The event parsing code in perf was originally copied from trace-cmd
but never was kept up-to-date with the changes that was done there.
The trace-cmd libtraceevent.a code is much more mature than what is
currently in perf.

This updates the code to use wrappers to handle the calls to the
new event parsing code. The new code requires a handle to be pass
around, which removes the global event variables and allows
more than one event structure to be read from different files
(and different machines).

But perf still has the old global events and the code throughout
perf does not yet have a nice way to pass around a handle.
A global 'pevent' has been made for perf and the old calls have
been created as wrappers to the new event parsing code that uses
the global pevent.

With this change, perf can later incorporate the pevent handle into
the perf structures and allow more than one file to be read and
compared, that contains different events.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:28:48 +02:00
Steven Rostedt
668fe01f1c events: Update tools/lib/traceevent to work with perf
Some of the util functions of libtraceevent.a conflict with perf,
such as die(), warning() and others. Move them into event-util.h
that is not included by the perf tools.

Also, as perf compiles with 'bool' the filter_arg->bool needs to
be renamed to filter_arg->boolean.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:12:26 +02:00
Steven Rostedt
d0e7b850b7 perf: Build libtraceevent.a
Have building perf also build libtraceevent.a. Currently, perf does
not use the code within libtraceevent.a, but it soon will.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 13:01:40 +02:00
Arnaldo Carvalho de Melo
44d1a3edfb perf annotate: Disambiguage offsets and addresses in operands
We were using ins_ops->target for callq addresses and jump offsets,
disambiguate by having ins_ops->target.addr and ins_ops->target.offset.

For jumps we'll need both to fixup lines that don't have an offset on
the <> part.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3nlcmstua75u07ao7wja1rwx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-25 08:00:23 -03:00
Arnaldo Carvalho de Melo
9481ede909 perf annotate browser: Handle NULL jump targets
In annotate_browser__mark_jump_targets

702                     dlt = browser->offsets[dl->ops.target];
703                     bdlt = disasm_line__browser(dlt);
704                     bdlt->jump_target = true;
705             }
706
707     }

(gdb) p size
$5 = 2415
(gdb) p offset
$6 = 140
(gdb) p dl->ops.target
$7 = 143
(gdb) p browser->offsets[143]
$8 = (struct disasm_line *) 0x0
(gdb) p dl->name
$9 = 0x2363bd0 "je"
(gdb)

Really strange, the code assumed that at the jump target we would have
an assembly line, but only in the previous instruction offset we have a
'lock':

(gdb) p browser->offsets[144]
$10 = (struct disasm_line *) 0x0
(gdb) p browser->offsets[142]
$11 = (struct disasm_line *) 0x27bd620
(gdb) p browser->offsets[142]->name
$12 = 0x237a8a0 "lock"
(gdb)

I'll study this more, but for now I'll just check if there is a
disasm_line at dl->ops.target, i.e. a valid jump target.

Reported-by: Hagen Paul Pfeifer <hagen@jauu.net>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-inzjrzyqhkzyv78met2vula6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-25 07:48:42 -03:00
Steven Rostedt
f7d82350e5 tools/events: Add files to create libtraceevent.a
Copy over the files from trace-cmd to the Linux tools directory
such that applications like perf and latencytrace can use the
more advanced parsing code.

Because some of the file names of perf conflict with trace-cmd file
names, the trace-cmd files have been renamed as follows:

 parse-events.c ==> event-parse.c
 parse-events.h ==> event-parse.h
 utils.h        ==> event-utils.h

The files have been updated to handle the changes to the header files
but other than that, they are identical to what was in the trace-cmd
repository. The history of these files, including authorship is
available at the git repo:

 git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git

The Makefile was also copied over, but most of it was removed to
focus on the parse-events code first. The parts of the Makefile for
the plugins have also been removed, but will be added back when the
plugin code is copied over as well. But that may be in its own
separate directory.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 12:28:28 +02:00
Steven Rostedt
4ace73eef5 perf: Separate out trace-cmd parse-events from perf files
Move the trace-event-parse.c code that originally came from trace-cmd into
their own files. The new file will be called trace-parse-events.c, as
the name of trace-cmd's file was parse-events.c too, but it conflicted
with the parse-events.c file in perf that parses the command line.

This tries to update the code with mimimal changes.

Perf specific code stays in the trace-event-parse.[ch] files and
the common parsing code is now in trace-parse-events.c and
trace-parse-events.h.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2012-04-25 12:28:18 +02:00
Ingo Molnar
3dbe927b1e Linux 3.4-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPkysaAAoJEHm+PkMAQRiGw9cH/1cepvUZxu/gHZnmWX/FnL0y
 AlyYgC/kHnM4MRp6GRt7RxbnJhVHPmTDuyMS4uZI7IwBr66FZiuL2Ds3tuv5WwBY
 sN24G0plKsNTjQoNdaBsA/M84dLG71YfHehQUCx271huiAalIL3fNJnwNnJHyGQj
 78evmV3/FhoTYISiX+nf18GEzggmU4a7UaQx64VWjkC5qcy8Q0TMLOaRe2QN7atE
 AfNYEMwtOlpHGfFA2SemfD8z4yTwjfmXYfwtqqxeUeLfl9iAh9qWfY6g9UEDAhce
 N1pqA11VNZg8nqUnGizA+p1Ja/lLjpoORYGCvCHrNVMzFnckFiIc/7CJJe/knkY=
 =6w68
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc4' into perf/core

Merge v3.4-rc4 - we were on -rc2 before.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-25 08:59:16 +02:00
Arnaldo Carvalho de Melo
a3f895be1f perf annotate browser: Initial loop detection
Simple algorithm, just look for the next backward jump that points to
before the cursor.

Then draw an arrow connecting the jump to its target.

Do this as you move the cursor, entering/exiting possible loops.

Ex (graph chars replaced to avoid mail encoding woes):

avc_has_perm_flags
    0.00 |         nopl   0x0(%rax)
    5.36 |+-> 68:  mov    (%rax),%rax
    5.15 ||        test   %rax,%rax
    0.00 ||      v je     130
    2.96 ||   74:  cmp    -0x20(%rax),%ebx
   47.38 ||        lea    -0x20(%rax),%rcx
    0.28 ||      ^ jne    68
    3.16 ||        cmp    -0x18(%rax),%dx
    0.00 |+------^ jne    68
    4.92 |         cmp    0x4(%rcx),%r13d
    0.00 |       v jne    68
    1.15 |         test   %rcx,%rcx
    0.00 |       v je     130

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5gairf6or7dazlx3ocxwvftm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-24 14:24:28 -03:00
Ulrich Drepper
f3054c778e perf tools: Cleanup realloc use
The if branch is completely unnecessary since 'realloc' handles NULL
pointers for the first parameter.

This is really only a cleanup and submitted mainly to prevent
proliferation of bad practices.

Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/201204231304.q3ND4TFe020805@drepperk.user.openhosting.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-23 15:33:05 -03:00
Arnaldo Carvalho de Melo
59d038d591 ui browser: Add method to write graphical characters
To save typing on the switch char set slang stuff.

It also helps in removing more slang direct calls, wrapping them at the
ui_browser level, where at some point I'll try to implement those in
terms of GTK+.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-63yhb2htv9g3g1olmojzptkd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 16:26:14 -03:00
Arnaldo Carvalho de Melo
c4cceae3ba perf annotate browser: Handle retq instructions
By just returning to the previous function being annotated or to the top
main screen when popping out the base of the annotation stack.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x1dlc4d5aukj72g45o15s75k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 15:57:15 -03:00
Arnaldo Carvalho de Melo
4ea08b5220 perf annotate browser: Add visual cue for retq instruction
Just use a left arrow prefixing retqs.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tnpfijuomrntbnl5vr6ibdwa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 15:51:40 -03:00
Arnaldo Carvalho de Melo
51a0d455b5 perf annotate browser: Add visual cues on jump lines
Using up/down arrows just before the instruction, replacing the actual chars
with approximations to avoid mail encoding snafus:

avtab_search_node
    0.00 |      push   %rbp
    0.00 |      mov    %rsp,%rbp
    0.00 |      callq  mcount
    0.00 |      movzwl 0x6(%rsi),%edx
    0.00 |      and    $0x7fff,%dx
    0.00 |      test   %rdi,%rdi
    0.00 |    v jne    20
    0.00 | 17:  xor    %eax,%eax
    0.00 | 19:  leaveq
    0.00 |      retq
    0.00 |      nopl   0x0(%rax,%rax,1)
    0.00 | 20:  mov    (%rdi),%rax
    0.00 |      test   %rax,%rax
    0.00 |    ^ je     17
    0.00 |      movzwl (%rsi),%ecx
    0.00 |      movzwl 0x2(%rsi),%r9d
    0.00 |      movzwl 0x4(%rsi),%r8d
    0.00 |      movzwl %cx,%esi
    0.00 |      movzwl %r9w,%r10d
    0.00 |      shl    $0x9,%esi
    0.00 |      lea    (%rsi,%r10,4),%esi
    0.00 |      lea    (%r8,%rsi,1),%esi
    0.00 |      and    0x10(%rdi),%si
    0.00 |      movzwl %si,%esi
    0.00 |      mov    (%rax,%rsi,8),%rax
    0.00 |      test   %rax,%rax
    0.00 |    ^ je     19
    0.00 |      nopw   0x0(%rax,%rax,1)
    0.00 | 60:  cmp    %cx,(%rax)
    0.00 |    v jne    7e
    0.00 |      cmp    %r9w,0x2(%rax)
    0.00 |    v jne    7e
    0.00 |      cmp    %r8w,0x4(%rax)
    0.00 |    v jne    79
    0.00 |      test   %dx,0x6(%rax)
    0.00 |    ^ jne    19
    0.00 | 79:  cmp    %r8w,0x4(%rax)
   93.04 | 7e:^ ja     17
    2.53 |      mov    0x10(%rax),%rax
    4.43 |      test   %rax,%rax
    0.00 |    ^ jne    60
    0.00 |      leaveq
    0.00 |      retq

Next low hanging fruit is to use left arrow for retqs, then work on clearling
marking loops.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hkx848wdbs6n7bcp3ymr9yus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 15:40:20 -03:00
Arnaldo Carvalho de Melo
d223288556 perf annotate browser: Suppress the callq address
0.00 |       callq  ffffffff8112f190 <__mod_zone_page_state>

Becomes:

    0.00 |       callq  __mod_zone_page_state

But if you press 'o' it gets verbose, i.e. as in objdump -dS:

    0.00 | ffffffff8116bdda:  callq  ffffffff8112f190 <__mod_zone_page_state>

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bwse2wib954y0db7dq91bes5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 15:26:47 -03:00
Arnaldo Carvalho de Melo
97148a97ba perf annotate browser: Bandaid offsets/jump label objdump ambiguity
We need to cope with things like:

$ objdump  -d --no-show-raw -S -C /lib/modules/3.4.0-rc2+/build/vmlinux
<SNIP>
ffffffff8125ec60 <copy_user_generic_unrolled>:
 * Output:
 * eax uncopied bytes or 0 if successful.
 */
ENTRY(copy_user_generic_unrolled)
	CFI_STARTPROC
	cmpl $8,%edx
ffffffff8125ec60:	cmp    $0x8,%edx
	jb 20f		/* less then 8 bytes, go to byte copy loop */
ffffffff8125ec63:	jb     ffffffff8125ecf5 <copy_user_generic_unrolled+0x95>
	ALIGN_DESTINATION
<SNIP>
ffffffff8125ec8d:	je     ffffffff8125ecd9 <copy_user_generic_unrolled+0x79>
1:	movq (%rsi),%r8
ffffffff8125ec8f:	mov    (%rsi),%r8
2:	movq 1*8(%rsi),%r9
ffffffff8125ec92:	mov    0x8(%rsi),%r9
3:	movq 2*8(%rsi),%r10
ffffffff8125ec96:	mov    0x10(%rsi),%r10
4:	movq 3*8(%rsi),%r11

<SNIP>

Probably expect that the length of the addr field be the same...

Lazy move for now, back to supporting suppressing the address on callq lines...

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7hp85vnvowpqj8799f8rxbu1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 15:17:50 -03:00
Arnaldo Carvalho de Melo
c7e6ead734 perf annotate: Group operands members
So that the ins_ops can handle them in a single place, instead of adding
more and more functions or ins_ops parameters.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pk4dqaum6ftiz104dvimwgtb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 14:38:46 -03:00
Jiri Olsa
33ff581edd perf symbols: Read plt symbols from proper symtab_type binary
When loading symbols from DSO we check multiple paths of DSO binary
until we succeed to load symbols ('.symtab' section). Once symbols are
read we try to load also plt symbols.

During the reading of plt symbols, the dso file is reopened from
location given by dso->long_name. This could be wrong in case we want
process buildid binaries.

The change is to make the plt symbols being read from the DSO path, that
normal symbols were read from.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334756818-6631-1-git-send-email-jolsa@redhat.com
[ committer note: moved dso to be the first parameter of that function ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-20 13:34:49 -03:00
Arnaldo Carvalho de Melo
3f862fd076 perf annotate: Add missing jump variants
Taken from binutils:

[acme@sandy binutils-2.22]$ grep ^j opcodes/i386-opc.tbl | cut -d, -f1 | sort -u

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mwshob8n12jlsu458ghvheos@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:10:12 -03:00
Arnaldo Carvalho de Melo
cf2dacc560 perf annotate browser: Use a vertical line as percentage separator
Where we had ':'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-l8gbejzpglnwiwk43450h31g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:08:31 -03:00
Arnaldo Carvalho de Melo
8bf39cb81b perf annotate browser: Make lines more compact
But now we have a lot of space on the right...

Perhaps we should add a "Trending on G+" gizmo... ;-)

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-igoynvtg2wc6mdfinc69prp6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:08:24 -03:00
Arnaldo Carvalho de Melo
61e04b332e perf annotate browser: Align jump labels
Find out at browser startup the max width and use it when rendering jump
labels on the screen.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7dxjiwqb77wz6f5lc05e0i0x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 13:15:24 -03:00
Arnaldo Carvalho de Melo
b793a40185 perf annotate browser: Hide non jump target addresses in offset mode
This:

    0.00 :         ffffffff8116bd00:       lock btsl $0x0,(%r12)
  100.00 :         ffffffff8116bd07:       sbb    %eax,%eax
    0.00 :         ffffffff8116bd09:       test   %eax,%eax
    0.00 :         ffffffff8116bd0b:       jne    ffffffff8116bf5f <__mem_cgroup_commit_charge+0x28f>
    0.00 :         ffffffff8116bd11:       mov    (%r12),%rax
    0.00 :         ffffffff8116bd15:       test   $0x2,%al
    0.00 :         ffffffff8116bd17:       jne    ffffffff8116bf6e <__mem_cgroup_commit_charge+0x29e>
    0.00 :         ffffffff8116bd1d:       test   %r9b,%r9b
    0.00 :         ffffffff8116bd20:       jne    ffffffff8116be30 <__mem_cgroup_commit_charge+0x160>
    0.00 :         ffffffff8116bd26:       xor    %eax,%eax
    0.00 :         ffffffff8116bd28:       mov    %r13,0x8(%r12)
    0.00 :         ffffffff8116bd2d:       lock orb $0x2,(%r12)
    0.00 :         ffffffff8116bd33:       test   %r9b,%r9b
    0.00 :         ffffffff8116bd36:       je     ffffffff8116bdf3 <__mem_cgroup_commit_charge+0x123>

Becomes:

    0.00 :         30:       lock btsl $0x0,(%r12)
  100.00 :                   sbb    %eax,%eax
    0.00 :                   test   %eax,%eax
    0.00 :                   jne    28f
    0.00 :                   mov    (%r12),%rax
    0.00 :                   test   $0x2,%al
    0.00 :                   jne    29e
    0.00 :                   test   %r9b,%r9b
    0.00 :                   jne    160
    0.00 :         56:       xor    %eax,%eax
    0.00 :         58:       mov    %r13,0x8(%r12)
    0.00 :                   lock orb $0x2,(%r12)
    0.00 :                   test   %r9b,%r9b
    0.00 :                   je     123

I.e. We trow away all those useless addresses and keep just jump labels.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r2vmbtgz0l8coluj8flztgrn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 12:19:22 -03:00
Arnaldo Carvalho de Melo
1b2e2df4e3 perf symbols: Introduce symbol__size method
Fixing some off by one cases in the process.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fxumzufhk829z0q9anmvemea@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 10:57:06 -03:00
Arnaldo Carvalho de Melo
887c0066a8 perf annotate browser: Rename disasm_line_rb_node
Its not just an rb_node, it carries extra state that is private to the
browser. And will carry some more in the next patches.

Better name it browser_disasm_line, i.e. something derived from
disasm_line, that specializes it.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nev4b97vdvv35we1qmooym52@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 10:29:53 -03:00
Arnaldo Carvalho de Melo
28548d78ad perf annotate: Introduce scnprintf ins_ops method
And implement the jump one, where if the operands string is not passed,
a compact form that uses just the target address is used.

Right now this is toggled via the 'o' option in the annotate browser,
switching from:

    0.00 :         ffffffff811661e8:       je     ffffffff81166204 <mem_cgroup_count_vm_event+0x44>
    0.00 :         ffffffff811661ea:       cmp    $0xb,%esi
    0.00 :         ffffffff811661ed:       je     ffffffff811661f8 <mem_cgroup_count_vm_event+0x38>

To:

    0.00 :         28:       je     44
    0.00 :         2a:       cmp    $0xb,%esi
    0.00 :         2d:       je     38

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o88q46yh4kxgpd1chk5gvjl5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 10:16:27 -03:00
Arnaldo Carvalho de Melo
d86b0597c4 perf annotate: Parse call targets earlier
No need to do it everytime the user presses enter/-> on a call
instruction.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ybgss44m5ycry8mk7b1qdbre@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-18 16:07:38 -03:00
Arnaldo Carvalho de Melo
4f9d03251b perf annotate: Disassembler instruction parsing
So that at disassembly time we parse targets, etc.

Supporting jump instructions initially, call functions are next.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7vzlh66n5or46n27ji658cnl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-18 13:58:34 -03:00
Gleb Natapov
e7c72d888d perf tools: Add 'G' and 'H' modifiers to event parsing
They were dropped during conversion of event parser. Add test case to
make sure this will not happen again.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20120417111345.GK11918@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-17 11:20:23 -03:00
Otavio Salvador
6ffd7bdbf8 perf tools: Drop CROSS_COMPILE from flex and bison calls
The flex and bison tools generate arch-independent C code so its
binaries are not prefixed with the target-arch prefix. With this patch
the Linux 3.4-rc2 can be successfuly build on OE-Core.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Link: http://lkml.kernel.org/r/1334148270-13139-1-git-send-email-otavio@ossystems.com.br
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 16:10:22 -03:00
Arnaldo Carvalho de Melo
657bcaf509 perf annotate browser: Use the disasm_line instruction name and operand fields
No need to reparse it everytime.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-90ncot487p4h5rzkn8h2whou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:16:39 -03:00
Arnaldo Carvalho de Melo
5145418b06 perf annotate: Parse instruction
For lines with instructions find the name and operands, breaking those
tokens for consumption by the browser.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6aazb9f5o3d9zi28e6rruv12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:15:07 -03:00
Arnaldo Carvalho de Melo
29ed6e76b4 perf annotate: Rename objdump_line to disasm_line
We want to move away from using 'objdump -dS' as the only disassembler
supported.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lsn9pjuxxm5ezsubyhkmprw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 12:09:59 -03:00
David Ahern
9e755756e4 perf report: Fix crash showing warning related to kernel maps
While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash:

(gdb) bt
 0  0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380
 1  cmd_report (argc=0, argv=<optimized out>, prefix=<optimized out>) at builtin-report.c:759
 2  0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273
 3  0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345
 4  run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389
 5  main (argc=3, argv=0x7fff80ceca70) at perf.c:487

kernel_map can be NULL, so need to handle it while dumping a warning
to user.

v2:
- fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16 11:18:22 -03:00
Ingo Molnar
7ea6411f4c Fixes for perf/urgent:
. Properly handle ~/.debug, the build id cache, when it is a symlink,
   fix from Chanho Park
 
 . Fixes for the parser generation process, from Jiri Olsa and Namhyung Kim
 
 . Fix build when NO_GTK2 is specified, From Stephane Eranian
 
 . When a machine is not found, bump the relevant error stat but return
   0, so that we correctly move to the next perf event. Fix from Jiri Olsa
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJPiayHAAoJENZQFvNTUqpAU+MP/RSDuLTNxhYf0VDvKi55gKnQ
 NK+1IjfnBbEo3uz2/WnlaXfj0TtiCNp0+r0dQqn3Hzuw9sc7zVOE+V1KlPvKMSml
 ruFn1NHEAc4J+/pa5t/tNEzFUm4IhtemclroWA+NplVS9trVzfVwwypieVOe+wkM
 ICRke30dfY+xvHOk+dAo3PQ/5qiycRH2GF4PYgivdU0psGPrTIbXICEjf0LRZzIZ
 B0a41Q9gASKNEXWQ6jEH7eGSyAZHuJ3V/tt4y1Nlnh94AgUwogHMohKf+ASTFI52
 BorwuDECIJGi1X9pdaP0A/Y6IdCNK0/sNGWl06FKW/wQ4qCpBucZrVv+CRkQX3B5
 vq23CrmOSNy6KH6s63z05v/v/v8mdnhofCRITXwztjnsdPDTosj742b/BKc7y8HY
 RY5mxinJgJptWRoBvpkVT/+xqn2Pn9Wup2XyM7vQAMoqqV7otpuGMQZ6V/ozymR2
 aBWzT8O+JerYmTb3HoBqjHSUIgTENGTawCYoXY3YPPH6gz9IDfPqCiyKRyWIhPnP
 Iw9L5gWQIodJNsmRfuK9qt4sTbMl7XvfXuyFYb2/YANNDkR7OyQktJnXMF3jj1cJ
 yAXV7sMPv4OWCDUBAgtDLsJHOuSovImM7M10UpzGnBKRNnYrjf6VT9BdWMQD22lP
 QDn7GRoElJT2tGn5CfeV
 =eQKW
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

. Properly handle ~/.debug, the build id cache, when it is a symlink,
  fix from Chanho Park

. Fixes for the parser generation process, from Jiri Olsa and Namhyung Kim

. Fix build when NO_GTK2 is specified, From Stephane Eranian

. When a machine is not found, bump the relevant error stat but return
  0, so that we correctly move to the next perf event. Fix from Jiri Olsa

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-15 08:02:36 +02:00
Chanho Park
e3b6193378 perf archive: Correct cutting of symbolic link
If a '$PERF_BUILDID_DIR'(typically $HOME/.debug) is a symbolic link
directory, cutting of the path will fail.

Here is an example where a buildid directory is a symbolic link.

/ # ls -al /root
lrwxrwxrwx    1 root     root            13 Mar 26  2012 /root -> opt/home/root
/ # cd ~
/opt/home/root # perf record -a -g sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.322 MB perf.data (~14057 samples) ]
/opt/home/root # perf archive
tar: Removing leading `/' from member names
Now please run:

$ tar xvf perf.data.tar.bz2 -C ~/.debug

wherever you need to run 'perf report' on.
/opt/home/root # mkdir temp
/opt/home/root # tar xf perf.data.tar.bz2 -C ./temp
/opt/home/root # find ./temp -name "*kernel*"
./temp/opt/home/root/.debug/[kernel.kallsyms]

-> If successfully cut off the path, [kernel.kallsyms] is located
in top of the archived file.

This patch enables to cut correctly even if the buildid directory
is a symbolic link.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333348109-12598-1-git-send-email-chanho61.park@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-14 13:52:15 -03:00
Namhyung Kim
77394ad6e4 perf tools: Ignore auto-generated bison/flex files
The commit 65f3e56e0c ("perf tools: Remove auto-generated bison/flex
files") removed those files from git, so they'll be listed on untracked
files after building perf. Fix it.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333948274-20043-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-14 13:50:39 -03:00
Jiri Olsa
2a5204fed0 perf tools: Fix parsers' rules to dependencies
Currently the parsers objects (bison/flex related) are each time perf
is built. No matter the generated files are already in place, the
parser generation is executed every time.

Changing the rules to have proper flex/bison objects generation
dependencies.

The parsers code is not rebuilt until the flex/bison source files
are touched. Also when flex/bison source is changed, only dependent
objects are rebuilt.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-14 13:49:43 -03:00
Ingo Molnar
a385ec4f11 Linux 3.4-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPgOpXAAoJEHm+PkMAQRiG8eUIAJ3Hjo0o5hqzxol8LWHDGF8s
 3h59qwRtts82u2psStZULPLbBzw6yjn8U5Mcrh7pffwCG2BzBL5rXcmXfvoPaET3
 TjylIj986Jv+jwZyuyZcLzYyoUtgjtq7hnt4tgVVEPlexYs7LxUl8vO8QjxT+bVO
 7eKgzLsXlBC9kw4P5M7kOBQ9NE5vmEcKf+fB3Hu3DqfVJtw9Lb7EeDQj/cbQsGqI
 vavSxe7lMTPsgMP2+hRz4txGTDJNRazkO2BdwfYrcNwTSa8tfBFlamww3y4+eJtq
 MFQfdNxQpumh2++T4IC2i/nLaawH7kWj2EdaRCRLMy9hVlb/v8/wcgd+1nfLkU8=
 =0on9
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc2' into perf/core

Merge Linux 3.4-rc2: we were on v3.3, update the base.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-13 09:57:10 +02:00
Ingo Molnar
a7ca08038b One more fix for perf/urgent:
. Fix mmap processing for guest kernels, from Nikunj A. Dadhania.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJPhe3dAAoJENZQFvNTUqpAKGQP/Rim6JRhsPYnPWcMI7A7l96s
 geK8YcPrCgF6FAAaD47nCWp41ABxZNMv3g/KEg27y2hxl4bys6ZVvJWe7ewusWjq
 xpKFu+CRaO1H7Vk9h9XDui3HLFpYAS2ZKDmtKOsooAfvZ00fOA25gQ+ZStzKYUqs
 w4e+4hc1V64AC0wa5K1w0GhJHqE/OFXIbGHg/anj5w76DCq4XkNmp/X16B39SfFs
 5O5PzI1mvElEA5P+7imTq0knq0nxKytZofkefpInj2j6QWKBxTuQHaFj4fSsvoas
 2Md+glOa5+4Z/mh5nxflWiLC5HFyTk6jz4punhLZgQTalDhuPNKRzhcXESobh60I
 PH3OKHkGvd9YDpgBVchB7WTcxQFLL1i4QFN8dFv+kwpfryPyDdlyNxX86EPvFyJ2
 HdRCmXmsu2nZ/XmlbtEJe31/2Bv0iaFNFCiwP/YN76Y4NUDKVjdqq7UeCie2W0EE
 hFCc6zpFJajCrHDANL6dxAvzjRSYZBRANlGKnBPBjUG6MtGdmcnqZlwuZhEboeBo
 PXAt+efzFd4yspaaqFxADuscAPCtUbllE95LnHFr7KPlmDbPXsO3Vkv0JSoAXyVY
 XYoEe9Zq2vSeGhKBULMpVmbRQgMsCwx6MRghxLrWiCVbZnUW0kqaFshsgUcB2X7S
 tYgsO2JwVg+xRGGIWzMk
 =fH+I
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull various perf tooling fixes from Arnaldo Carvalho de Melo.
2012-04-13 09:47:04 +02:00
Linus Torvalds
9b1ef1de20 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull trivial perf build failure fix from Thomas Gleixner.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix getrusage() related build failure on glibc trunk
2012-04-12 15:20:24 -07:00
Stephane Eranian
f755397211 perf tools: fix NO_GTK2 Makefile config error
In case the user specified NO_GTK2 on the make cmdline, compilation
would fail with undefined symbol because the Makefile would not set the
correct cpp variable: NO_GTK2 vs. NO_GTK2_SUPPORT.

This patch renames the variable to the correct name.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120410103513.GA9229@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-12 15:48:15 -03:00
Jiri Olsa
6782206b5d perf session: Skip event correctly for unknown id/machine
In case the perf_session__process_event function fails, we estimate the
next event offset.

This is not necessary for sample event failing on unknown ID or machine.
In such case we know proper size of the event, so we dont need to guess.
Also failure statistics are updated correctly so we don't miss any
information.

Forcing perf_session__process_event to return 0 in case of unknown ID or
machine.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334233262-5679-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-12 12:14:50 -03:00
Robert Richter
5a7ed29c75 perf record: Use sw counter only if hw pmu is not detected
Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw
pmu available. This is the case if the syscall reports ENOENT. In
other cases (e.g. invalid attributes) we don't want the sw counter to
be used.

Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:39:19 -03:00
Robert Richter
61d5bf5b01 perf tools: Fix thread map that is type pid_t
Thread map is actually type pid_t and not int.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:38:50 -03:00
Robert Richter
666e6d48c5 perf stat: Declare some references static
This references are not exported, use static declaration.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-4-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:37:16 -03:00
Namhyung Kim
e7b3ba6d8b perf tools: Move GTK+ bits to tools/perf/ui/gtk directory
Move those files to new directory in order to be prepared to
further UI work. Makefile and header file pathes are adjusted
accordingly. Also fix a build breakage if NO_GTK2=1 is given.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523765-12092-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:18:31 -03:00
Namhyung Kim
aca7a94d6a perf tools: Move UI bits to tools/perf/ui directory
Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523666-12057-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:16:40 -03:00
Namhyung Kim
a31b7cc083 perf annotate: Fix a build error
CC util/annotate.o
util/annotate.c: In function symbol__annotate:
util/annotate.c:87:16: error: parsed_line may be used uninitialized in this function [-Werror=maybe-uninitialized]
util/annotate.c:211:22: note: parsed_line was declared here
cc1: all warnings being treated as errors
make: *** [util/annotate.o] Error 1
make: *** Waiting for unfinished jobs....

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ashay Rane <ashay.rane@tacc.utexas.edu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87ty0tlv4i.fsf@dasan.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 17:07:18 -03:00
Jiri Olsa
024e6c9747 perf tools: Fix parsers' rules to dependencies
Currently the parsers objects (bison/flex related) are each time perf
is built. No matter the generated files are already in place, the
parser generation is executed every time.

Changing the rules to have proper flex/bison objects generation
dependencies.

The parsers code is not rebuilt until the flex/bison source files
are touched. Also when flex/bison source is changed, only dependent
objects are rebuilt.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 16:57:09 -03:00
Borislav Petkov
ea01fa9f63 tools: Connect to the kernel build system
Now you can do

$ make tools/<toolname>

from the toplevel kernel directory and have the respective tool built.

If you want to build and install it, do

$ make tools/<toolname>_install

$ make tools/<toolname>_clean

should clean the respective tool directories.

If you want to clean all in tools, simply do

$ make tools/clean

Also, if you want to get what the possible targets are, simply calling

$ make tools/

should give you the short help.

$ make tools/install

installs all tools, of course. Doh.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 15:00:17 -03:00
Borislav Petkov
d5dd8afb56 tools: Add a help target
... and make it the default one so that calling 'make' without arguments
in the tools/ directory gives you the possible targets to build along
with a short description of what they are.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-5-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 14:59:00 -03:00
Borislav Petkov
2363ecb170 tools: Add a toplevel Makefile
Add a Makefile with all the targets under tools/.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-4-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 14:58:43 -03:00
Borislav Petkov
d8caf3eb24 tools: Cleanup EXTRA_WARNINGS
Use += instead of the bash syntax, as Sam Ravnborg suggests. Also, sort
the -W options alphabetically and (... keep them sorted).

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-3-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 14:57:50 -03:00
Borislav Petkov
98d89bfd0d tools: Add Makefile.include
Put generic enough build settings which could be reused by other tools
into a common Makefile.include file.

This commit reintroduces QUIET_SUBDIR{0,1} (see a3d1ee10d1) which are
going to be used in the following patches.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-2-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 14:57:36 -03:00
Nikunj A. Dadhania
7fb0a5ee88 perf kvm: Finding struct machine fails for PERF_RECORD_MMAP
Running 'perf kvm --host --guest --guestmount /tmp/guestmount record -a -g -- sleep 2'

Was resulting in a segfault. For event type PERF_RECORD_MMAP,
event->ip.pid is being used in perf_session__find_machine_for_cpumode,
which is not correct.

The event->ip.pid field happens to be 0 in this case and results in
returning a NULL machine object. Finally, access to self->pid in
machine__mmap_name, results in a segfault later.

For PERF_RECORD_MMAP type, pass event->mmap.pid.

Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120409081835.10576.22018.stgit@abhimanyu.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 11:45:12 -03:00
Namhyung Kim
2381da7a11 perf tools: Ignore auto-generated bison/flex files
The commit 65f3e56e0c ("perf tools: Remove auto-generated bison/flex
files") removed those files from git, so they'll be listed on untracked
files after building perf. Fix it.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333948274-20043-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11 11:41:27 -03:00
Arnaldo Carvalho de Melo
d3d1f61acf perf annotate browser: string search: /?n
Using the same keystrokes as vim:

/ = search forward
n = search next forward/backwards
? = search backwards

Still needs to continue from start/end when not found, use HOME + / or
END + ? for now.

At some point we need a keybindings file to support ones favourite mode,
erm, like EMACS, etc.

Also we now need a 'h' window with all these keybindings.

Requested-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 17:37:22 -03:00
Ashay Rane
cc68628096 perf report: Correct display of samples and events in header
This patch prints the number of samples and the count of performance
events separately.

This allows comparing performance of different applications with each
other.

Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):

Samples: 5K of event 'instructions'
Event count (approx.): 2993026545

The patch covers both the stdio and the browser interface.

Signed-off-by: Ashay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1 ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 17:29:41 -03:00
Arnaldo Carvalho de Melo
08be4eeda4 perf annotate browser: Initial support for navigating jump instructions
Now it is possible to press ENTER or -> (right arrow) on jump
instructions to navigate to the offset it points to.

More work needed to support <- to go back, i.e. a jump history.

This is done just like the callq case, i.e. parsing objdump output
lines, but should move to use Masami's disassembler at some point.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-706qqe2xibeiocuabp39mby7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:14:23 -03:00
Arnaldo Carvalho de Melo
b0ffb2c48a perf ui annotate browser: Add list based search for addr offset
From the hit sorted rb_tree, so that we can use it in the upcoming jump
instruction support.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:11:33 -03:00
Arnaldo Carvalho de Melo
6052170249 perf ui annotate browser: Move callq handling to separate function
So that we can as well handle jumps. Later we'll move this to a proper
intruction table, etc.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:10:50 -03:00
Arnaldo Carvalho de Melo
e235f3f3bf perf ui annotate browser: Allow toggling addr offset view
The lines in objdump have this format:

    ffffffff8126543f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
    ffffffff81265494:       mov    %rdi,%rcx

Since we now have objdump_line allowing tools to print the offset
independently from the rest of the line, allow toggling a view where
just offsets from the start of the function are shown:

     2f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
     84:       mov    %rdi,%rcx

The offset view will be the default as soon as operations that deal with
offsets in a function are handled accodringly, i.e. in offset view the
above will become:

     2f:       jne    __list_del_entry+0x84
<SNIP>
     84:       mov    %rdi,%rcx

And then a follow up patch will allow navigating thru jumps, just like
we handle callq instructions.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4zpgimmz8xv7b5c920el7s45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:10:19 -03:00
Arnaldo Carvalho de Melo
058b4cc9af perf annotate: Allow printing objdump line addr in different color
And by default use "magenta" for it.

Both the --stdio and --tui routines follow the same semantics.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ede5zkaf7oorwvbqjezb4yg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:09:05 -03:00
Arnaldo Carvalho de Melo
087091652b perf ui browser: Return the current color when setting a new one
Tools that want to change parts of the line to a different color and
then restore the previous one will use this, starting with the annotate
browser that will change the color of addresses if not on the current
entry, i.e. the selected one.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uiajpevhxo4mzrvna6remb4a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-07 16:08:42 -03:00
Arnaldo Carvalho de Melo
31d68e7b66 perf annotate: Validate addr in symbol__inc_addr_samples
This routine was checking only if the provided address was after
sym->end, not if it was before sym->start.

Fix that by checking for both and return in both cases -ERANGE, so that
tools can communicate this to the user properly, or if they chose so, to
abort.

This problem was reported previously but the fixes involved either doing
what was being done for the > end case, i.e. silently drop the sample,
returning 0, or aborting at this function, which is in a lib (or better,
is slated to be at some point) and shouldn't abort.

The 'report' tool already checks this value and uses pr_debug to warn
the user.

This patch makes the 'top' tool check it too and warn once per map where
such range problem takes place.

Reported-by: David Miller <davem@davemloft.net>
Reported-by: Sorin Dumitru <dumitru.sorin87@gmail.com>
Reported-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-lw8gs7p9i9nhldilo82tzpne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-05 19:51:14 -03:00
Jiri Olsa
8493fe1daf perf hists browser: Fix NULL deref in hists browsing code
If there's an event with no samples in data file, the perf report
command can segfault after entering the event details menu.

Following steps reproduce the issue:

 # ./perf record -e syscalls:sys_enter_kexec_load,syscalls:sys_enter_mmap ls
 # ./perf report
 # enter '0 syscalls:sys_enter_kexec_load' menu
 # pres ENTER twice

Above steps are valid assuming ls wont run kexec.. ;)

The check for sellection to be NULL is missing. The fix makes sure it's
being check. Above steps now endup with menu being displayed allowing
'Exit' as the only option.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333570898-10505-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-05 18:58:45 -03:00
David Miller
63fa471dd4 perf hists: Catch and handle out-of-date hist entry maps.
When a process exec()'s, all the maps are retired, but we keep the hist
entries around which hold references to those outdated maps.

If the same library gets mapped in for which we have hist entries, a new
map will be created.  But when we take a perf entry hit within that map,
we'll find the existing hist entry with the older map.

This causes symbol translations to be done incorrectly.  For example,
the perf entry processing will lookup the correct uptodate map entry and
use that to calculate the symbol and DSO relative address.  But later
when we update the histogram we'll translate the address using the
outdated map file instead leading to conditions such as out-of-range
offsets in symbol__inc_addr_samples().

Therefore, update the map of the hist_entry dynamically at lookup/
creation time.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120327.031418.1220315351537060808.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-05 18:53:47 -03:00
Arnaldo Carvalho de Melo
8b84a56811 perf annotate: Fix hist decay
We were only decaying the entries for the offsets that were associated
with an objdump line.

That way, when we accrued the whole instruction addr range, more than
100% was appearing in some cases in the live annotation TUI.

Fix it by not traversing the source code line at all, just iterate thru
the complete addr range decaying each one.

Reported-by: Mike Galbraith <mgalbraith@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hcae5oxa22syjrnalsxz7s6n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-05 18:49:18 -03:00
Arnaldo Carvalho de Melo
4bea8b5cf8 perf top: Add intel_idle to the skip list
TODO: Accrue the cycles in the skip_list to an idle total, and show this
on the 'top' UI, as suggested by Steven.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-9nfecmgghgl5747rjxqpc28f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-05 18:48:01 -03:00
Markus Trippelsdorf
7b78f13603 perf tools: Fix getrusage() related build failure on glibc trunk
On a system running glibc trunk perf doesn't build:

    CC builtin-sched.o
builtin-sched.c: In function ‘get_cpu_usage_nsec_parent’: builtin-sched.c:399:16: error: storage size of ‘ru’ isn’t known builtin-sched.c:403:2: error: implicit declaration of function ‘getrusage’ [-Werror=implicit-function-declaration]
    [...]

Fix it by including sys/resource.h.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120404084527.GA294@x4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-04 11:59:00 +02:00
Linus Torvalds
f187e9fd68 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates and fixes from Ingo Molnar:
 "It's mostly fixes, but there's also two late items:

   - preliminary GTK GUI support for perf report
   - PMU raw event format descriptors in sysfs, to be parsed by tooling

  The raw event format in sysfs is a new ABI.  For example for the 'CPU'
  PMU we have:

    aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/*
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask

  those lists of fields contain a specific format:

    aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp
    config1:0-63

  So, those who wish to specify raw events can now use the following
  event format:

    -e cpu/cmask=1,event=2,umask=3

  Most people will not want to specify any events (let alone raw
  events), they'll just use whatever default event the tools use.

  But for more obscure PMU events that have no cross-architecture
  generic events the above syntax is more usable and a bit more
  structured than specifying hex numbers."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  perf tools: Remove auto-generated bison/flex files
  perf annotate: Fix off by one symbol hist size allocation and hit accounting
  perf tools: Add missing ref-cycles event back to event parser
  perf annotate: addr2line wants addresses in same format as objdump
  perf probe: Finder fails to resolve function name to address
  tracing: Fix ent_size in trace output
  perf symbols: Handle NULL dso in dso__name_len
  perf symbols: Do not include libgen.h
  perf tools: Fix bug in raw sample parsing
  perf tools: Fix display of first level of callchains
  perf tools: Switch module.h into export.h
  perf: Move mmap page data_head offset assertion out of header
  perf: Fix mmap_page capabilities and docs
  perf diff: Fix to work with new hists design
  perf tools: Fix modifier to be applied on correct events
  perf tools: Fix various casting issues for 32 bits
  perf tools: Simplify event_read_id exit path
  tracing: Fix ftrace stack trace entries
  tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
  perf report: Add a simple GTK2-based 'perf report' browser
  ...
2012-03-31 13:34:04 -07:00
Ingo Molnar
8ebfdf2bab Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent 2012-03-31 09:27:41 +02:00
Linus Torvalds
a335750b9a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management changes from Len Brown:
 - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
 - cpuidle evolving, more ARM use
 - thermal sub-system evolving, ditto
 - assorted other PM bits

Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
  ACPI throttling: fix endian bug in acpi_read_throttling_status()
  Disable MCP limit exceeded messages from Intel IPS driver
  ACPI video: Don't start video device until its associated input device has been allocated
  ACPI video: Harden video bus adding.
  ACPI: Add support for exposing BGRT data
  ACPI: export acpi_kobj
  ACPI: Fix logic for removing mappings in 'acpi_unmap'
  CPER failed to handle generic error records with multiple sections
  ACPI: Clean redundant codes in scan.c
  ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
  ACPI: consistently use should_use_kmap()
  PNPACPI: Fix device ref leaking in acpi_pnp_match
  ACPI: Fix use-after-free in acpi_map_lsapic
  ACPI: processor_driver: add missing kfree
  ACPI, APEI: Fix incorrect APEI register bit width check and usage
  Update documentation for parameter *notrigger* in einj.txt
  ACPI, APEI, EINJ, new parameter to control trigger action
  ACPI, APEI, EINJ, limit the range of einj_param
  ACPI, APEI, Fix ERST header length check
  cpuidle: power_usage should be declared signed integer
  ...
2012-03-30 16:45:39 -07:00
Ingo Molnar
65f3e56e0c perf tools: Remove auto-generated bison/flex files
These should not be in the Git history - they are auto-generated.

Extend the Makefile rules of the parser files to include the generation
run.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120327183335.GA27621@gmail.com
[ committer note: Fixed up O= handling ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-30 12:43:17 -03:00
Len Brown
15aaa34654 tools turbostat: harden against cpu online/offline
Sometimes users have turbostat running in interval mode
when they take processors offline/online.

Previously, turbostat would survive, but not gracefully.

Tighten up the error checking so turbostat notices
changesn sooner, and print just 1 line on change:

turbostat: re-initialized with num_cpus %d

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 22:27:19 -04:00
Len Brown
88c3281f7b tools turbostat: reduce measurement overhead due to IPIs
turbostat uses /dev/cpu/*/msr interface to read MSRs.
For modern systems, it reads 10 MSR/CPU.  This can
be observed as 10 "Function Call Interrupts"
per CPU per sample added to /proc/interrupts.

This overhead is measurable on large idle systems,
and as Yoquan Song pointed out, it can even trick
cpuidle into thinking the system is busy.

Here turbostat re-schedules itself in-turn to each
CPU so that its MSR reads will always be local.
This replaces the 10 "Function Call Interrupts"
with a single "Rescheduling interrupt" per sample
per CPU.

On an idle 32-CPU system, this shifts some residency from
the shallow c1 state to the deeper c7 state:

 # ./turbostat.old -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.29 2.29   0.95   0.02   0.00  98.77  20.23   0.00  77.41   0.00
  0.25 1.24 2.29   0.98   0.02   0.00  98.75  20.34   0.03  77.74   0.00
  0.27 1.22 2.29   0.54   0.00   0.00  99.18  20.64   0.00  77.70   0.00
  0.26 1.22 2.29   1.22   0.00   0.00  98.52  20.22   0.00  77.74   0.00
  0.26 1.38 2.29   0.78   0.02   0.00  98.95  20.51   0.05  77.56   0.00
^C
 i# ./turbostat.new -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.20 2.29   0.24   0.01   0.00  99.49  20.58   0.00  78.20   0.00
  0.27 1.22 2.29   0.25   0.00   0.00  99.48  20.79   0.00  77.85   0.00
  0.27 1.20 2.29   0.25   0.02   0.00  99.46  20.71   0.03  77.89   0.00
  0.28 1.26 2.29   0.25   0.01   0.00  99.46  20.89   0.02  77.67   0.00
  0.27 1.20 2.29   0.24   0.01   0.00  99.48  20.65   0.00  78.04   0.00

cc: Youquan Song <youquan.song@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 22:04:58 -04:00
Linus Torvalds
1c03658877 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils
Pull cpupower updates from Dominik Brodowski.

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower tools: add install target to the debug tools' makefiles
  cpupower tools: allow to build debug tools in a separate directory too
  cpupower: Fix broken mask values
  cpupower tool: allow to build in a separate directory
  cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target
  cpupower tool: remove use of undefined variables from the clean target of the top makefile
  cpupower: Fix linking with --as-needed
  cpupower: Remove unneeded code and by that fix a memleak
  cpupower: Fix number of idle states
  cpupower: Unify cpupower-frequency-* manpages
  cpupower: Add cpupower-idle-info manpage
  cpupower: AMD fam14h/Ontario monitor can also be used by fam12h cpus
  cpupower: Better interface for accessing AMD pci registers
2012-03-29 16:03:12 -07:00
Arnaldo Carvalho de Melo
64c17be4ff perf annotate: Fix off by one symbol hist size allocation and hit accounting
We were not noticing it because symbol__inc_addr_samples was erroneously
dropping samples that hit the last byte in a function.

Working on a fix for a problem reported by David Miller, Stephane
Eranian and Sorin Dumitru, where addresses < sym->start were causing
problems, I noticed this other problem.

Cc: David Ahern <dsahern@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sorin Dumitru <dumitru.sorin87@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pqjaq4cr1xs2xen73pjhbav4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-29 17:13:45 -03:00
Len Brown
e23da0370f tools turbostat: add summary option
turbostat -s
cuts down on the amount of output, per user request.

also treak some output whitespace and the man page.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-29 13:22:06 -04:00
Namhyung Kim
cc96aa7a7f perf tools: Add missing ref-cycles event back to event parser
The commit 89812fc81f ("perf tools: Add parser generator for events
parsing") changed event parsing engine but missed the ref-cycles event.
Add it.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333016517-10591-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-29 11:05:50 -03:00
Dave Young
f0f57b2b14 mm: move hugepage test examples to tools/testing/selftests/vm
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are
simple pass/fail tests, It's better to promote them to
tools/testing/selftests.

Thanks suggestion of Andrew Morton about this.  They all need firstly
setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs.
So I add a shell script run_vmtests to do such work which will call the
three test programs and check the return value of them.

Changes to original code including below:
a. add run_vmtests script
b. return error when read_bytes mismatch with writed bytes.
c. coding style fixes: do not use assignment in if condition

[akpm@linux-foundation.org: build the targets before trying to execute them]
[akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Dave Young
63e315535a mm: move slabinfo.c to tools/vm
We have tools/vm/ folder for vm tools, so move slabinfo.c from tools/slub/
to tools/vm/

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Dave Young
c6dd897f3b mm: move page-types.c from Documentation to tools/vm
tools/ is the better place for vm tools which are used by many people.
Moving them to tools also make them open to more users instead of hide in
Documentation folder.

This patch moves page-types.c to tools/vm/page-types.c.  Also add a
Makefile in tools/vm and fix two coding style problems: a) change const
arrary to 'const char * const', b) change a space to tab for indent.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Andrew Morton
cab6b05600 selftests/Makefile: make run_tests' depend on all'
So a "make run_tests" will build the tests before trying to run them.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Frederic Weisbecker
f467f71403 selftests: launch individual selftests from the main Makefile
Remove the run_tests script and launch the selftests by calling "make
run_tests" from the selftests top directory instead.  This delegates to
the Makefile in each selftest directory, where it is decided how to launch
the local test.

This removes the need to add each selftest directory to the now removed
"run_tests" top script.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
David Miller
f40a06339f perf annotate: addr2line wants addresses in same format as objdump
Therefore, in symbol__get_source_line(), use map__rip_2objdump
instead of calling map->unmap_ip() unconditionally.

Link: http://lkml.kernel.org/r/20120325.162812.59519424882536855.davem@davemloft.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-28 12:06:24 -03:00
Prashanth Nageshappa
ba28c59bc9 perf probe: Finder fails to resolve function name to address
If DIE entries corresponding to declarations appear before definition
entry, probe finder returns error instead of continuing to look further
for a definition entry.

This patch ensures we reach to the DIE entry corresponding to the
definition and get the function address.

V2: A simpler solution based on Masami's suggestion.

Signed-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/4F703FB9.9020407@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-28 11:56:49 -03:00
Linus Torvalds
de8856d2c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 1) Name string overrun fix in gianfar driver from Joe Perches.

 2) VHOST bug fixes from Michael S. Tsirkin and Nadav Har'El

 3) Fix dependencies on xt_LOG netfilter module, from Pablo Neira Ayuso.

 4) Fix RCU locking in xt_CT, also from Pablo Neira Ayuso.

 5) Add a parameter to skb_add_rx_frag() so we can fix the truesize
    adjustments in the drivers that use it.  The individual drivers
    aren't fixed by this commit, but will be dealt with using follow-on
    commits.  From Eric Dumazet.

 6) Add some device IDs to qmi_wwan driver, from Andrew Bird.

 7) Fix a potential rcu_read_lock() imbalancein rt6_fill_node().  From
    Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: fix a potential rcu_read_lock() imbalance in rt6_fill_node()
  net: add a truesize parameter to skb_add_rx_frag()
  gianfar: Fix possible overrun and simplify interrupt name field creation
  USB: qmi_wwan: Add ZTE (Vodafone) K3570-Z and K3571-Z net interfaces
  USB: option: Ignore ZTE (Vodafone) K3570/71 net interfaces
  USB: qmi_wwan: Add ZTE (Vodafone) K3565-Z and K4505-Z net interfaces
  qlcnic: Bug fix for LRO
  netfilter: nf_conntrack: permanently attach timeout policy to conntrack
  netfilter: xt_CT: fix assignation of the generic protocol tracker
  netfilter: xt_CT: missing rcu_read_lock section in timeout assignment
  netfilter: cttimeout: fix dependency with l4protocol conntrack module
  netfilter: xt_LOG: use CONFIG_IP6_NF_IPTABLES instead of CONFIG_IPV6
  vhost: fix release path lockdep checks
  vhost: don't forget to schedule()
  tools/virtio: stub out strong barriers
  tools/virtio: add linux/hrtimer.h stub
  tools/virtio: add linux/module.h stub
2012-03-27 16:52:32 -07:00
David Miller
1e2dd2f73a perf symbols: Handle NULL dso in dso__name_len
We should use "[unknown]" in this case, in concert with the code in
_hist_entry__dso_snprintf().

Otherwise we'll crash when recomputing the histogram column lengths in
hists__calc_col_len().

Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20120325.162822.2267799792062571623.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-27 11:00:58 -03:00
David Miller
3738d40ec5 perf symbols: Do not include libgen.h
That causes us to end up using the XPG version of basename which can
modify it's argument.

Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20120327.000301.1122788061724345175.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-27 10:57:48 -03:00
Stephane Eranian
fa30c964c0 perf tools: Fix bug in raw sample parsing
In perf_event__parse_sample(), the array variable was not incremented
by the amount of data used by the raw_data.

That was okay until we added PERF_SAMPLE_BRANCH_STACK which depends on
the array variable pointing to the beginning of the branch stack data.

But that was not the case if branch stack was combined with raw mode
sampling. That led to bogus branch stack addresses and count.

The bug would show up with:
$ perf record -R -b foo

This patch fixes the problem by correctly moving the array pointer
forward for RAW samples.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120317222317.GA8803@quad
[ committer note: Fix also later submitted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-26 15:36:03 -03:00
Frederic Weisbecker
6d4818c524 perf tools: Fix display of first level of callchains
The callchain stdio mode display was written using a sorted by symbol
report. In this mode we have only one callchain root per hist so we
forgot to handle cases where we have multiple callchain root, as in per
dso sorting for example.

Fix this by handling these roots like any other branch, with the hist as
the parent.

Before:

     1.97%  libpthread-2.12.1.so
            |
            --- __libc_write
                create_worker
                bench_sched_messaging
                cmd_bench
                run_builtin
                main
                __libc_start_main

            |
            --- __libc_read
                create_worker
                bench_sched_messaging
                cmd_bench
                run_builtin
                main
                __libc_start_main

After:

     1.97%  libpthread-2.12.1.so
            |
            |--36.97%-- __libc_write
            |          create_worker
            |          bench_sched_messaging
            |          cmd_bench
            |          run_builtin
            |          main
            |          __libc_start_main
            |
            |--31.47%-- __libc_read
            |          create_worker
            |          bench_sched_messaging
            |          cmd_bench
            |          run_builtin
            |          main
            |          __libc_start_main
           ...

Single roots keep their entry without percentage because they have
the same overhead than the hist they refer to. ie: 100% in fractal
mode and the percentage of the hist in graph mode:

     0.00%  [k] reschedule_interrupt
            |
            --- default_idle
                amd_e400_idle
                cpu_idle
                start_secondary

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1332526010-15400-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-26 15:14:40 -03:00
Jiri Olsa
2c86bf172e perf tools: Switch module.h into export.h
When merged to Linus's latest tree the perf build is broken
due to following change in lib/rbtree.c object:

  lib: reduce the use of module.h wherever possible
  commit 8bc3bcc93a
  Author: Paul Gortmaker <paul.gortmaker@windriver.com>
  Date:   Wed Nov 16 21:29:17 2011 -0500

We need to move module.h header into export.h.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/1332753425-3299-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-26 17:19:57 +02:00
Ingo Molnar
7fd52392c5 Merge branch 'linus' into perf/urgent
Merge reason: we need to fix a non-trivial merge conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-26 17:19:03 +02:00
Akinobu Mita
307b1cd7ec bitops: rename for_each_set_bit_cont() in favor of analogous list.h function
This renames for_each_set_bit_cont() to for_each_set_bit_from() because
it is analogous to list_for_each_entry_from() in list.h rather than
list_for_each_entry_continue().

This doesn't remove for_each_set_bit_cont() for now.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:33 -07:00
David S. Miller
f1e84eb3bb Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2012-03-23 14:46:48 -04:00
Linus Torvalds
f0a5ec0e8d ktest for v3.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPafMcAAoJEIy3vGnGbaoALNUQAMZ8G+WDXD/RKtsO4V41rWOa
 vCCUQ6BDTld53fLdTMwYBH9Uev9LLsQ/itOp8ne/apVn5DCghqm1rAfd5sIk9TaQ
 zqnvF8QvZXnPCbUZe8mXH4ki2Shh+mvxkucAtsC9C4RBcu8QloIy7UGZPioEVxYj
 TiadqKNicvSSIvEy3fM98qzbVu+GZZpZwfH0asiWV4rxLLovWNn2Ly7BGPLLHWa8
 iamWVyG9QS51MzyEAxo4LBWGA4aK0k6+W5QxK2SmruA7g0YWzBf3DU5CfsXncj43
 eOs/aVkBApPPIJ/VQDuhbdHAY+wIQAItojVAbSdebv0xC4SDtLbHHAgMVNtgLOIa
 ysfLI+h8APbOh4nyqwNh5FuSnew4QvR1ZW47bZHmN7K7NjmcJ93geEvt//7eQnxz
 X0iWJSCwAOyKORgsPU0lZgGM1lD50Qtmt1IZX5T87ksDSIhx5Lk/pAQo43nByj3g
 e53swGxIQyaUqJwQ5ItJh7e8jQBZ6eyZDEWslro2S6uV9MFJnrH+cJJSk4LqO94y
 dTu4uk/aCyXH3fbk1qfincfn5bzCvlrbSMsldbU6ODLFqyr8R1I8kcTZy/2k3i4q
 eURDh94D6HEuu/QL1NvB5dKkuOfxmH3dr3S/5xv/IfIxruC+N+jGns0rmoFiE0KO
 pnThls+OFAXhrw7YhV2d
 =2NU4
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest changes from Steven Rostedt.

* tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Allow a test to override REBOOT_ON_SUCCESS
  ktest: Fix SWITCH_TO_GOOD to also reboot the machine
  ktest: Add SCP_TO_TARGET_INSTALL option
  ktest: Add warning when bugs are ignored
  ktest: Add INSTALL_MOD_STRIP=1 when installing modules
2012-03-23 09:28:45 -07:00
Jiri Olsa
4bf9ce1b5e perf diff: Fix to work with new hists design
The perf diff command is broken since:
  perf hists: Threaded addition and sorting of entries
  commit 1980c2ebd7

Several places were broken:
  - hists data need to be collected into opened sessions instead
    of into events
  - session's hists data need to be initialized properly when the
    session is created
  - hist_entry__pcnt_snprintf: the percentage and displacement
    buffer preparation must not use 'ret' because it's used
    as a pointer to the final buffer

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120322133726.GB1601@m.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22 15:12:09 -03:00
Jiri Olsa
5d7be90ed5 perf tools: Fix modifier to be applied on correct events
The event modifier needs to be applied only on the event definition it
is attached to.

The current state is that in case of multiple events definition (in
single '-e' option, separated by ',') all will get modifier of the last
one.

Fixing this by adding separated list for each event definition, so the
modifier is applied only to proper event(s). Added automated test to
catch this, plus some other modifier tests.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1332267341-26338-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22 15:11:38 -03:00
Jiri Olsa
9fafd98f1b perf tools: Fix various casting issues for 32 bits
- util/parse-events.c(parse_events_add_breakpoint)
  need to use unsigned long instead of u64, otherwise
  we get following gcc error on 32 bits:
     error: cast from pointer to integer of different size

- util/header.c(print_event_desc)
  cannot retype to signed type, otherwise we get following
  gcc error on 32 bits:
     error: comparison between signed and unsigned integer expressions

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1332267341-26338-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22 15:11:18 -03:00
Borislav Petkov
842f07f612 perf tools: Simplify event_read_id exit path
We're freeing the token in any case so simplify the exit path by
unifying it.

No functional change.

Signed-off-by: Borislav Petkov <bp@amd64.org>
Link: http://lkml.kernel.org/r/1332339347-21342-1-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22 15:10:42 -03:00
Arnaldo Carvalho de Melo
0d09eb7a9a Merge branch 'perf/urgent' into perf/core
Merge Reason: to pick the fix:

 commit e7f01d1
     perf tools: Use scnprintf where applicable

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-22 15:09:08 -03:00
Linus Torvalds
02c502566e Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/build changes from Ingo Molnar.

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, build: Fix portability issues when cross-building
  x86, tools: Remove unneeded header files from tools/build.c
  USB: ffs-test: Don't duplicate {get,put}_unaligned*() functions
  x86, efi: Fix endian issues and unaligned accesses
  x86, boot: Restrict CFLAGS for hostprogs
  x86, mkpiggy: Don't open code put_unaligned_le32()
  x86, relocs: Don't open code put_unaligned_le32()
  tools/include: Add byteshift headers for endian access
2012-03-22 09:40:53 -07:00
Steven Rostedt
648a182c61 ktest: Allow a test to override REBOOT_ON_SUCCESS
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot
the the box if all tests are successful. But a test may not want the
machine to reboot, and perhaps have the kernel it loaded be used to
install the next kernel. Or the last test may set up a kernel that the
user may want to look at. In this case, the user could have the global
option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the
end, that test can override the global option and keep the kernel it
installed for the user to log in with.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
Steven Rostedt
769df641cc ktest: Fix SWITCH_TO_GOOD to also reboot the machine
When the option SWITCH_TO_GOOD is set, it will be called when the system
needs to reboot to the good server. But currently, this keeps the reboot
from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel,
it may not mean to not reboot.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:24:57 -04:00
Steven Rostedt
02ad261704 ktest: Add SCP_TO_TARGET_INSTALL option
Currently the option used to scp both the modules to the target as well
as the kernel image are the same (SCP_TO_TARGET). But some embedded
boards may require them to be different. The modules may need to be put
directly on the board, but the kernel image may need to go to a
tftpserver.

Add the option SCP_TO_TARGET_INSTALL that will allow the user to change
the config so that they may have the modules and image got to different
machines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
Steven Rostedt
6ca996cc7c ktest: Add warning when bugs are ignored
When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace
is detected. But this can be an issue if the user added it in the
config but forgot to remove it. They may be left wondering why their
test did not fail, or even worse, why their bisect gave the wrong
commit.

Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects
a kernel error.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:18:35 -04:00
Steven Rostedt
627977d83a ktest: Add INSTALL_MOD_STRIP=1 when installing modules
To keep the modules from bloating the target's filesystem
strip them during the install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:16:15 -04:00
Linus Torvalds
69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Linus Torvalds
ed378a52da USB merge for 3.4-rc1
Here's the big USB merge for the 3.4-rc1 merge window.
 
 Lots of gadget driver reworks here, driver updates, xhci changes, some
 new drivers added, usb-serial core reworking to fix some bugs, and other
 various minor things.
 
 There are some patches touching arch code, but they have all been acked
 by the various arch maintainers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9njL8ACgkQMUfUDdst+ylQ9wCfbBOnIT01lGOorkaE9pom0hhk
 HfMAoKq1xzCR2B+OS3UMyUQffk+Ri9Ri
 =KIQ2
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...
2012-03-20 11:26:30 -07:00
Linus Torvalds
4a52246302 driver core merge for 3.4-rc1
Here's the big driver core merge for 3.4-rc1.
 
 Lots of various things here, sysfs fixes/tweaks (with the nlink breakage
 reverted), dynamic debugging updates, w1 drivers, hyperv driver updates,
 and a variety of other bits and pieces, full information in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9neCsACgkQMUfUDdst+ylyQwCfY2eizvzw5HhjQs8gOiBRDADe
 yrgAnj1Zan2QkoCnQIFJNAoxqNX9yAhd
 =biH6
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches for 3.4-rc1 from Greg KH:
 "Here's the big driver core merge for 3.4-rc1.

  Lots of various things here, sysfs fixes/tweaks (with the nlink
  breakage reverted), dynamic debugging updates, w1 drivers, hyperv
  driver updates, and a variety of other bits and pieces, full
  information in the shortlog."

* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
  Tools: hv: Support enumeration from all the pools
  Tools: hv: Fully support the new KVP verbs in the user level daemon
  Drivers: hv: Support the newly introduced KVP messages in the driver
  Drivers: hv: Add new message types to enhance KVP
  regulator: Support driver probe deferral
  Revert "sysfs: Kill nlink counting."
  uevent: send events in correct order according to seqnum (v3)
  driver core: minor comment formatting cleanups
  driver core: move the deferred probe pointer into the private area
  drivercore: Add driver probe deferral mechanism
  DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
  w1_bq27000: Only one thread can access the bq27000 at a time.
  w1_bq27000 - remove w1_bq27000_write
  w1_bq27000: remove unnecessary NULL test.
  sysfs: Fix memory leak in sysfs_sd_setsecdata().
  intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
  w1: Fix w1_bq27000
  driver-core: documentation: fix up Greg's email address
  powernow-k6: Really enable auto-loading
  powernow-k7: Fix CPU family number
  ...
2012-03-20 11:16:20 -07:00
Linus Torvalds
9c2b957db1 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events changes for v3.4 from Ingo Molnar:

 - New "hardware based branch profiling" feature both on the kernel and
   the tooling side, on CPUs that support it.  (modern x86 Intel CPUs
   with the 'LBR' hardware feature currently.)

   This new feature is basically a sophisticated 'magnifying glass' for
   branch execution - something that is pretty difficult to extract from
   regular, function histogram centric profiles.

   The simplest mode is activated via 'perf record -b', and the result
   looks like this in perf report:

	$ perf record -b any_call,u -e cycles:u branchy

	$ perf report -b --sort=symbol
	    52.34%  [.] main                   [.] f1
	    24.04%  [.] f1                     [.] f3
	    23.60%  [.] f1                     [.] f2
	     0.01%  [k] _IO_new_file_xsputn    [k] _IO_file_overflow
	     0.01%  [k] _IO_vfprintf_internal  [k] _IO_new_file_xsputn
	     0.01%  [k] _IO_vfprintf_internal  [k] strchrnul
	     0.01%  [k] __printf               [k] _IO_vfprintf_internal
	     0.01%  [k] main                   [k] __printf

   This output shows from/to branch columns and shows the highest
   percentage (from,to) jump combinations - i.e.  the most likely taken
   branches in the system.  "branches" can also include function calls
   and any other synchronous and asynchronous transitions of the
   instruction pointer that are not 'next instruction' - such as system
   calls, traps, interrupts, etc.

   This feature comes with (hopefully intuitive) flat ascii and TUI
   support in perf report.

 - Various 'perf annotate' visual improvements for us assembly junkies.
   It will now recognize function calls in the TUI and by hitting enter
   you can follow the call (recursively) and back, amongst other
   improvements.

 - Multiple threads/processes recording support in perf record, perf
   stat, perf top - which is activated via a comma-list of PIDs:

	perf top -p 21483,21485
	perf stat -p 21483,21485 -ddd
	perf record -p 21483,21485

 - Support for per UID views, via the --uid paramter to perf top, perf
   report, etc.  For example 'perf top --uid mingo' will only show the
   tasks that I am running, excluding other users, root, etc.

 - Jump label restructurings and improvements - this includes the
   factoring out of the (hopefully much clearer) include/linux/static_key.h
   generic facility:

	struct static_key key = STATIC_KEY_INIT_FALSE;

	...

	if (static_key_false(&key))
	        do unlikely code
	else
	        do likely code

	...
	static_key_slow_inc();
	...
	static_key_slow_inc();
	...

   The static_key_false() branch will be generated into the code with as
   little impact to the likely code path as possible.  the
   static_key_slow_*() APIs flip the branch via live kernel code patching.

   This facility can now be used more widely within the kernel to
   micro-optimize hot branches whose likelihood matches the static-key
   usage and fast/slow cost patterns.

 - SW function tracer improvements: perf support and filtering support.

 - Various hardenings of the perf.data ABI, to make older perf.data's
   smoother on newer tool versions, to make new features integrate more
   smoothly, to support cross-endian recording/analyzing workflows
   better, etc.

 - Restructuring of the kprobes code, the splitting out of 'optprobes',
   and a corner case bugfix.

 - Allow the tracing of kernel console output (printk).

 - Improvements/fixes to user-space RDPMC support, allowing user-space
   self-profiling code to extract PMU counts without performing any
   system calls, while playing nice with the kernel side.

 - 'perf bench' improvements

 - ... and lots of internal restructurings, cleanups and fixes that made
   these features possible.  And, as usual this list is incomplete as
   there were also lots of other improvements

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits)
  perf report: Fix annotate double quit issue in branch view mode
  perf report: Remove duplicate annotate choice in branch view mode
  perf/x86: Prettify pmu config literals
  perf report: Enable TUI in branch view mode
  perf report: Auto-detect branch stack sampling mode
  perf record: Add HEADER_BRANCH_STACK tag
  perf record: Provide default branch stack sampling mode option
  perf tools: Make perf able to read files from older ABIs
  perf tools: Fix ABI compatibility bug in print_event_desc()
  perf tools: Enable reading of perf.data files from different ABI rev
  perf: Add ABI reference sizes
  perf report: Add support for taken branch sampling
  perf record: Add support for sampling taken branch
  perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK
  x86/kprobes: Split out optprobe related code to kprobes-opt.c
  x86/kprobes: Fix a bug which can modify kernel code permanently
  x86/kprobes: Fix instruction recovery on optimized path
  perf: Add callback to flush branch_stack on context switch
  perf: Disable PERF_SAMPLE_BRANCH_* when not supported
  perf/x86: Add LBR software filter support for Intel CPUs
  ...
2012-03-20 10:29:15 -07:00
Pekka Enberg
c31a945705 perf report: Add a simple GTK2-based 'perf report' browser
This patch adds a simple GTK2-based browser to 'perf report' that's
based on the TTY-based browser in builtin-report.c.

To launch "perf report" using the new GTK interface just type:

  $ perf report --gtk

The interface is somewhat limited in features at the moment:

  - No callgraph support

  - No KVM guest profiling support

  - No color coding for percentages

  - No sorting from the UI

  - ..and many, many more!

That said, I think this patch a reasonable start to build future features on.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain
[ committer note: Added #pragma to make gtk no strict prototype problem go
  away as suggested by Colin Walters modulo avoiding push/pop ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-19 15:13:29 -03:00
Namhyung Kim
fde0eeaba7 perf report: Document --symbol-filter option
Add missing description of --symbol-filter in Documentation/perf-report.txt.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1332125628-23088-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-19 12:13:56 -03:00
Namhyung Kim
f7e5410920 perf ui browser: Clean lines inside of the input window
As Arnaldo pointed out, it should be cleared to prevent the window from
displaying overlapped strings on the region.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1332125180-23041-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-19 12:07:30 -03:00
K. Y. Srinivasan
adc80ae60e Tools: hv: Support enumeration from all the pools
We have only supported enumeration only from the AUTO pool. Now support
enumeration from all the available pools.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16 13:36:04 -07:00
K. Y. Srinivasan
db425334e5 Tools: hv: Fully support the new KVP verbs in the user level daemon
Now fully support the new KVP messages in the user level daemon. Hyper-V defines
multiple persistent pools to which the host can write/read/modify KVP tuples.
In this patch we implement a file for each specified pool, where the KVP tuples
will be stored in the guest.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16 13:36:04 -07:00
K. Y. Srinivasan
fa3d5b85c6 Drivers: hv: Support the newly introduced KVP messages in the driver
Support the newly defined KVP message types. It turns out that the host
pushes a set of standard key value pairs as soon as the guest opens the KVP channel.
Since we cannot handle these tuples until the user level daemon loads up, defer
reading the KVP channel until the user level daemon is launched.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16 13:36:04 -07:00
Namhyung Kim
6db6127c4d perf report: Treat an argument as a symbol filter
As Ingo requested, it'd be better off treating first (and the only)
argument as a symbol filter, so that user doesn't need to input the
symbol on the dialog window on TUI.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:44:36 -03:00
Namhyung Kim
b14ffaca44 perf report: Add --symbol-filter option
Add new --symbol-filter command line option to set appropriate filter
string.

Its short version is missing as I couldn't find an ideal one and
--filter option of perf record also has no short version.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:41:30 -03:00
Namhyung Kim
938a23ae7f perf ui browser: Add 's' key to filter by symbol name
Now user can enter symbol name interested via ui_browser__input_window,
and perf can process it using hists__filter_by_symbol(). Giving empty
symbol (by pressing 's' followed by ENTER) will disable the filtering.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:34:13 -03:00
Namhyung Kim
aa49f6ec99 perf ui browser: Introduce ui_browser__input_window
The ui_browser__input_window() function is to get user's key input.
Current implementation can handle maximum 49 characters.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:32:36 -03:00
Namhyung Kim
e94d53ebec perf hists: Add hists__filter_by_symbol
This function will be used for simple (sub-)string matching filter based
on user input.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887855-874-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:31:09 -03:00
Namhyung Kim
5090c6aea8 perf tools: Do not disable members of group event
When event group is enabled for forked task (i.e. no target task/cpu
was specified) all events were disabled and marked ->enable_on_exec.
However they wouldn't be counted at all since only group leader will
be enabled on exec actually.

In contrast to perf stat, perf record doesn't have a real problem
as it enables all the event before proceeding. But it needs to be
fixed anyway IMHO.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887340-32448-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:29:33 -03:00
Namhyung Kim
4c19ea453d perf stat: Fix event grouping on forked task
When event group is enabled for forked task (i.e. no target task was
specified) all events were disabled and marked ->enable_on_exec.
However they are not counted at all since only group leader will be
enabled on exec actually. So the result looked like below:

 $ ./perf stat --group -- sleep 1

 Performance counter stats for 'sleep 1':

          0.554926 task-clock                #    0.001 CPUs utilized
     <not counted> context-switches
     <not counted> CPU-migrations
     <not counted> page-faults
     <not counted> cycles
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
     <not counted> instructions
     <not counted> branches
     <not counted> branch-misses

       1.001228093 seconds time elapsed

Fix it by disabling group leader only.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887340-32448-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 16:13:45 -03:00
Jiri Olsa
5f537a2659 perf tools: Add support to specify pmu style event
Added new event rule to the event definition grammar:

event_def: event_pmu |
           ...
event_pmu: PE_NAME '/' event_config '/'

Using this rule, event could be now specified like:
  cpu/config=1,config1=2,config2=3/u

where pmu name 'cpu' is looked up via following path:
  ${sysfs_mount}/bus/event_source/devices/${pmu}

and config options are bound to the pmu's format definiton:
  ${sysfs_mount}/bus/event_source/devices/${pmu}/format

The hardcoded config options still stays and have precedence
over any format field defined with same name.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-50d8nr94f8k4wkezutrxvthe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 14:30:13 -03:00
Jiri Olsa
cd82a32e99 perf tools: Add perf pmu object to access pmu format definition
Adding pmu object which provides interface to pmu's sysfs
event format definition located at:
  ${sysfs_mount}/bus/event_source/devices/${pmu}/format

Following interface is exported:
  struct perf_pmu* perf_pmu__find(char *name);
  - this function returns pmu object, which is then
    passed as a handle to other interface functions

  int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr,
                       struct list_head *head_terms);
  - this function configures perf_event_attr struct based
    on pmu's format definitions and config terms data,
    containined in head_terms list.

Parser generator is used to retrive the pmu's format definition.
The generated parser is part of the patch. Added makefile rule
'pmu-parser' to generate the parser code out of the bison/flex
sources.

Added builtin test 'Test perf pmu format parsing', which could
be run like:
	perf test pmu

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-errz96u1668gj9wlop1zhpht@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 14:29:35 -03:00
Jiri Olsa
8f707d843c perf tools: Add config options support for event parsing
Adding a new rule to the event grammar to be able to specify
values of additional attributes of symbolic event.

The new syntax for event symbolic definition is:

event_legacy_symbol:  PE_NAME_SYM '/' event_config '/' |
                      PE_NAME_SYM sep_slash_dc

event_config:         event_config ',' event_term | event_term

event_term:           PE_NAME '=' PE_NAME |
                      PE_NAME '=' PE_VALUE
                      PE_NAME

sep_slash_dc: '/' | ':' |

At the moment the config options are hardcoded to be used for legacy
symbol events to define several perf_event_attr fields. It is:

  'config'   to define perf_event_attr::config
  'config1'  to define perf_event_attr::config1
  'config2'  to define perf_event_attr::config2
  'period'   to define perf_event_attr::sample_period

Legacy events could be now specified as:
  cycles/period=100000/

If term is specified without the value assignment, then 1 is
assigned by default.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mgkavww9790jbt2jdkooyv4q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 14:26:06 -03:00
Jiri Olsa
89812fc81f perf tools: Add parser generator for events parsing
Changing event parsing to use flex/bison parse generator.
The event syntax stays as it was.

grammar description:

events: events ',' event | event

event:  event_def PE_MODIFIER_EVENT | event_def

event_def: event_legacy_symbol sep_dc     |
           event_legacy_cache sep_dc      |
           event_legacy_breakpoint sep_dc |
           event_legacy_tracepoint sep_dc |
           event_legacy_numeric sep_dc    |
           event_legacy_raw sep_dc

event_legacy_symbol:      PE_NAME_SYM

event_legacy_cache:       PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT |
                          PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT  |
                          PE_NAME_CACHE_TYPE

event_legacy_raw:         PE_SEP_RAW PE_VALUE

event_legacy_numeric:     PE_VALUE ':' PE_VALUE

event_legacy_breakpoint:  PE_SEP_BP ':' PE_VALUE ':' PE_MODIFIER_BP

event_breakpoint_type:    PE_MODIFIER_BPTYPE | empty

PE_NAME_SYM:              cpu-cycles|cycles                              |
                          stalled-cycles-frontend|idle-cycles-frontend   |
                          stalled-cycles-backend|idle-cycles-backend     |
                          instructions                                   |
                          cache-references                               |
                          cache-misses                                   |
                          branch-instructions|branches                   |
                          branch-misses                                  |
                          bus-cycles                                     |
                          cpu-clock                                      |
                          task-clock                                     |
                          page-faults|faults                             |
                          minor-faults                                   |
                          major-faults                                   |
                          context-switches|cs                            |
                          cpu-migrations|migrations                      |
                          alignment-faults                               |
                          emulation-faults

PE_NAME_CACHE_TYPE:       L1-dcache|l1-d|l1d|L1-data             |
                          L1-icache|l1-i|l1i|L1-instruction      |
                          LLC|L2                                 |
                          dTLB|d-tlb|Data-TLB                    |
                          iTLB|i-tlb|Instruction-TLB             |
                          branch|branches|bpu|btb|bpc            |
                          node

PE_NAME_CACHE_OP_RESULT:  load|loads|read                        |
                          store|stores|write                     |
                          prefetch|prefetches                    |
                          speculative-read|speculative-load      |
                          refs|Reference|ops|access              |
                          misses|miss

PE_MODIFIER_EVENT:        [ukhp]{0,5}

PE_MODIFIER_BP:           [rwx]

PE_SEP_BP:                'mem'

PE_SEP_RAW:               'r'

sep_dc:                   ':' |

Added flex/bison files for event grammar parsing. The generated
parser is part of the patch. Added makefile rule 'event-parser'
to generate the parser code out of the bison/flex sources.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-u4pfig5waq3ll2bfcdex8fgi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-16 14:20:21 -03:00
Jan Beulich
4a3d2d9bfb perf tools: Adjust make rules
Add rules to generate pre-processed files (just like are available for
the normal kernel build), and adjust the rule to create assembly files
from C ones to produce its output in the output directory rather than
in the source tree.

E.g.

  $ make -C tools/perf/ O=/tmp/perf /tmp/perf/builtin-top.i
  make: Entering directory `/home/git/linux/tools/perf'
      CC /tmp/perf/builtin-top.i
  make: Leaving directory `/home/git/linux/tools/perf'
  $ wc -l /tmp/perf/builtin-top.i
  31379 /tmp/perf/builtin-top.i
  $

Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4F588A0802000078000770FF@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-15 14:23:28 -03:00
Ingo Molnar
eae7a755ee perf tools, x86: Build perf on older user-space as well
On ancient systems I get this build failure:

  util/../../../arch/x86/include/asm/unistd.h:67:29: error: asm/unistd_64.h: No such file or directory
  In file included from util/cache.h:7,
                   from builtin-test.c:8:
  util/../perf.h: In function ‘sys_perf_event_open’:In file included from util/../perf.h:16
  perf.h:170: error: ‘__NR_perf_event_open’ undeclared (first use in this function)

The reason is that this old system does not have the split
unistd.h headers yet, from which to pick up the syscall
definitions.

Add the syscall numbers to the already existing i386 and x86_64
blocks in perf.h, and also provide empty include file stubs.

With this patch perf builds and works fine on 5 years old
user-space as well.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-jctwg64le1w47tuaoeyftsg9@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-14 12:42:34 -03:00
Arnaldo Carvalho de Melo
e7f01d1e3d perf tools: Use scnprintf where applicable
Several places were expecting that the value returned was the number of
characters printed, not what would be printed if there was space.

Fix it by using the scnprintf and vscnprintf variants we inherited from
the kernel sources.

Some corner cases where the number of printed characters were not
accounted were fixed too.

Reported-by: Anton Blanchard <anton@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/n/tip-kwxo2eh29cxmd8ilixi2005x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-14 12:36:19 -03:00
Anton Blanchard
b832796caa perf tools: Incorrect use of snprintf results in SEGV
I have a workload where perf top scribbles over the stack and we SEGV.
What makes it interesting is that an snprintf is causing this.

The workload is a c++ gem that has method names over 3000 characters
long, but snprintf is designed to avoid overrunning buffers. So what
went wrong?

The problem is we assume snprintf returns the number of characters
written:

    ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level);
...
    ret += repsep_snprintf(bf + ret, size - ret, "%s", self->ms.sym->name);

Unfortunately this is not how snprintf works. snprintf returns the
number of characters that would have been written if there was enough
space. In the above case, if the first snprintf returns a value larger
than size, we pass a negative size into the second snprintf and happily
scribble over the stack. If you have 3000 character c++ methods thats a
lot of stack to trample.

This patch fixes repsep_snprintf by clamping the value at size - 1 which
is the maximum snprintf can write before adding the NULL terminator.

I get the sinking feeling that there are a lot of other uses of snprintf
that have this same bug, we should audit them all.

Cc: David Ahern <dsahern@gmail.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120307114249.44275ca3@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-14 12:36:19 -03:00
K. Y. Srinivasan
e485ceac9e Drivers: hv: Add new message types to enhance KVP
Add additional KVP (Key Value Pair) protocol  messages to
enhance KVP functionality for Linux guests on Hyper-V. As part of this,
patch define an explicit version negoitiation message.

Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13 14:35:25 -07:00