Commit Graph

102 Commits

Author SHA1 Message Date
Bob Peterson
091806edd4 [GFS2] filesystem consistency error from do_strip
This patch fixes a GFS2 filesystem consistency error reported from
function do_strip.  The problem was caused by a timing window
that allowed two vfs inodes to be created in memory that point
to the same file.  The problem is fixed by making the vfs's
iget_test, iget_set mechanism check and set a new bit in the
in-core gfs2_inode structure while the vfs inode spin_lock is held.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-05-12 08:54:53 +01:00
Benjamin Marzinski
58e9fee13e [GFS2] Invalidate cache at correct point
GFS2 wasn't invalidating its cache before it called into the lock manager
with a request that could potentially drop a lock.  This was leaving a
window where the lock could be actually be held by another node, but the
file's page cache would still appear valid, causing coherency problems.
This patch moves the cache invalidation to before the lock manager call
when dropping a lock. It also adds the option to the lock_dlm lock
manager to not use conversion mode deadlock avoidance, which, on a
conversion from shared to exclusive, could internally drop the lock, and
then reacquire in. GFS2 now asks lock_dlm to not do this.  Instead, GFS2
manually drops the lock and reacquires it.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:41:44 +01:00
Steven Whitehouse
77658aad22 [GFS2] Eliminate (almost) duplicate field from gfs2_inode
The blocks counter is almost a duplicate of the i_blocks
field in the VFS inode. The only difference is that i_blocks
can be only 32bits long for 32bit arch without large single file
support. Since GFS2 doesn't handle the non-large single file
case (for 32 bit anyway) this adds a new config dependency on
64BIT || LSF. This has always been the case, however we've never
explicitly said so before.

Even if we do add support for the non-LSF case, we will still
not require this field to be duplicated since we will not be
able to access oversized files anyway.

So the net result of all this is that we shave 8 bytes from a gfs2_inode
and get our config deps correct.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:55 +01:00
Steven Whitehouse
ac576cc5be [GFS2] Merge the rd_last_alloc_meta and rd_last_alloc_data fields
We don't need to keep track of when we last allocated data
and metadata separately since the only thing thats important
when searching for a free block is whether its free or not,
which is independent from what type of block it is.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:39 +01:00
Steven Whitehouse
ce276b06e8 [GFS2] Reduce inode size by merging fields
There were three fields being used to keep track of the location
of the most recently allocated block for each inode. These have
been merged into a single field in order to better keep the
data and metadata for an inode close on disk, and also to reduce
the space required for storage.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:37 +01:00
Bob Peterson
9feb7c889f [GFS2] Remove unused counters
This is kind of trivial in the greater scheme of things, but
this removes three counters that AFAICT are never used.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:34 +01:00
Steven Whitehouse
9a0045088d [GFS2] Shrink & rename di_depth
This patch forms a pair with the previous patch which shrunk
di_height. Like that patch di_depth is renamed i_depth and moved
into struct gfs2_inode directly. Also the field goes from 16 bits
to 8 bits since it is also limited to a max value which is rather
small (17 in this case). In addition we also now validate the field
against this maximum value when its read in.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:31 +01:00
Bob Peterson
cf45b752c9 [GFS2] Remove rgrp and glock version numbers
This patch further reduces GFS2's memory requirements by
eliminating the 64-bit version number fields in lieu of
a couple bits.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:29 +01:00
Steven Whitehouse
da755fdb41 [GFS2] Remove lm.[ch] and distribute content
The functions in lm.c were just wrappers which were mostly
only used in one other file. By moving the functions to
the files where they are being used, they can be marked
static and also this will usually result in them being inlined
since they are often only used from one point in the code.

A couple of really trivial functions have been inlined by hand
into the function which called them as it makes the code clearer
to do that.

We also gain from one fewer function call in the glock lock and
unlock paths.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:26 +01:00
Bob Peterson
ab0d756681 [GFS2] Eliminate gl_req_bh
This patch further reduces the memory needs of GFS2 by
eliminating the gl_req_bh variable from struct gfs2_glock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:23 +01:00
Bob Peterson
29d38cd163 [GFS2] Get rid of gl_waiters2
This patch reduces memory by replacing the int variable
gl_waiters2 by a single bit in the gl_flags.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:13 +01:00
Bob Peterson
42d52e3818 [GFS2] Combine rg_flags and rd_flags
This patch reduces the memory required by GFS2 by combining
the rd_flags and rg_flags (in core only).

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:10 +01:00
Bob Peterson
d0109bfa84 [GFS2] Only do lo_incore_commit once
This patch is performance related.  When we're doing a log flush,
I noticed we were calling buf_lo_incore_commit twice: once for
data bufs and once for metadata bufs.  Since this is the same
function and does the same thing in both cases, there should be
no reason to call it twice.  Since we only need to call it once,
we can also make it faster by removing it from the generic "lops"
code and making it a stand-along static function.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:39:54 +01:00
Steven Whitehouse
ecc30c7915 [GFS2] Streamline indirect pointer tree height calculation
This patch improves the calculation of the tree height in order to reduce
the number of operations which are carried out on each call to gfs2_block_map.
In the common case, we now make a single comparison, rather than calculating
the required tree height from scratch each time. Also in the case that the
tree does need some extra height, we start from the current height rather from
zero when we work out what the new height ought to be.

In addition the di_height field is moved into the inode proper and reduced
in size to a u8 since the value must be between 0 and GFS2_MAX_META_HEIGHT (10).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:39:46 +01:00
Pavel Emelyanov
eccba06891 gfs2: make gfs2_glock.gl_owner_pid be a struct pid *
The gl_owner_pid field is used to get the lock owning task by its pid, so make
it in a proper manner, i.e.  by using the struct pid pointer and pid_task()
function.

The pid_task() becomes exported for the gfs2 module.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:06 -08:00
Pavel Emelyanov
b1e058da50 gfs2: make gfs2_holder.gh_owner_pid be a struct pid *
The gl_owner_pid field is used to get the holder task by its pid and check
whether the current is a holder, so make it in a proper manner, i.e.  via the
struct pid * manipulations.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:06 -08:00
Bob Peterson
598278bd48 [GFS2] Remove unneeded i_spin
This patch removes a vestigial variable "i_spin" from the gfs2_inode
structure.  This not only saves us memory (>300000 of these in memory
for the oom test) it also saves us time because we don't have to
spend time initializing it (i.e. slightly better performance).

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:18:44 +00:00
Steven Whitehouse
6dbd822487 [GFS2] Reduce inode size by moving i_alloc out of line
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.

In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:18:25 +00:00
Steven Whitehouse
65a6290998 [GFS2] Remove unused variable
The go_drop_th function is never called or referenced.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:16:19 +00:00
Bob Peterson
c3f60b6e3a [GFS2] Eliminate the no longer needed sd_statfs_mutex
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves
the ordering as discussed.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:15:16 +00:00
Bob Peterson
da6dd40d59 [GFS2] Journal extent mapping
This patch saves a little time when gfs2 writes to the journals by
keeping a mapping between logical and physical blocks on disk.
That's better than constantly looking up indirect pointers in
buffers, when the journals are several levels of indirection
(which they typically are).

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:11:46 +00:00
Steven Whitehouse
e35b921185 [GFS2] Don't periodically update the jindex
We only care about the content of the jindex in two cases,
one is when we mount the fs and the other is when we need
to recover another journal. In both cases we have to update
the jindex anyway, so there is no point in updating it
periodically between times, so this removes it to simplify
gfs2_logd.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:59 +00:00
Steven Whitehouse
fd041f0b40 [GFS2] Use atomic_t for journal free blocks counter
This patch changes the counter which keeps track of the free
blocks in the journal to an atomic_t in preparation for the
following patch which will update the log reservation code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:54 +00:00
Steven Whitehouse
2bcd610d2f [GFS2] Don't add glocks to the journal
The only reason for adding glocks to the journal was to keep track
of which locks required a log flush prior to release. We add a
flag to the glock to allow this check to be made in a simpler way.

This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64)
and means that we can avoid extra work during the journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:52 +00:00
Steven Whitehouse
e589665eb9 [GFS2] Remove flags no longer required
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders
depending upon which of the two waiters lists they were going to
be queued upon. They were then tested when the holders were taken
off the lists to ensure that the right type of holder was being
dequeued.

Since we are already using separate lists, there doesn't seem a
lot of point having these flags as well, and since setting them
and testing them is in the fast path for locking and unlocking
glock, this patch removes them.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:44 +00:00
Steven Whitehouse
c2932e03db [GFS2] Remove "reclaim limit"
This call to reclaim glocks is not needed, and in particular we don't want it
in the fast path for locking glocks. The limit was entirely arbitrary anyway
and we can't expect users to adjust things like this, the remaining code will
do the right thing on its own.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:37 +00:00
Steven Whitehouse
60b0d08779 [GFS2] Remove unused variables
These haven't been used for some time, remove them.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:35 +00:00
Steven Whitehouse
bf36a71316 [GFS2] Add gfs2_is_writeback()
This adds a function "gfs2_is_writeback()" along the lines of the
existing "gfs2_is_jdata()" in order to clean up the code and make
the various tests for the inode mode more obvious. It also fixes
the PageChecked() logic where we were resetting the flag too early
in the case of an error path.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:21 +00:00
Steven Whitehouse
e7e36f1435 [GFS2] Remove unused field in struct gfs2_inode
Removes a field that is not used.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:18 +00:00
Steven Whitehouse
f91a0d3e24 [GFS2] Remove useless i_cache from inodes
The i_cache was designed to keep references to the indirect blocks
used during block mapping so that they didn't have to be looked
up continually. The idea failed because there are too many places
where the i_cache needs to be freed, and this has in the past been
the cause of many bugs.

In addition there was no performance benefit being gained since the
disk blocks in question were cached anyway. So this patch removes
it in order to simplify the code to prepare for other changes which
would otherwise have had to add further support for this feature.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:16 +00:00
Steven Whitehouse
3cc3f710ce [GFS2] Use ->page_mkwrite() for mmap()
This cleans up the mmap() code path for GFS2 by implementing the
page_mkwrite function for GFS2. We are thus able to use the
generic filemap_fault function for our ->fault() implementation.

This now means that shared writable mappings will be much more
efficiently shared across the cluster if there is a reasonable
proportion of read activity (the greater proportion, the better).

As a side effect, it also reduces the size of the code, removes
special cases from readpage and readpages, and makes the code
path easier to follow.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:13 +00:00
Wendy Cheng
cc7e79b168 [GFS2] Handle multiple glock demote requests
Fix a race condition where multiple glock demote requests are sent to
a node back-to-back. This patch does a check inside handle_callback()
to see whether a demote request is in progress. If true, it sets a flag
to make sure run_queue() will loop again to handle the new request,
instead of erronously setting gl_demote_state to a different state.

Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:09 +00:00
Steven Whitehouse
16615be18c [GFS2] Clean up journaled data writing
This patch cleans up the code for writing journaled data into the log.
It also removes the need to allocate a small "tag" structure for each
block written into the log. Instead we just keep count of the outstanding
I/O so that we can be sure that its all been written at the correct time.
Another result of this patch is that a number of ll_rw_block() calls
have become submit_bh() calls, closing some races at the same time.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:24 +01:00
Steven Whitehouse
82e86087bb [GFS2] Replace revoke structure with bufdata structure
Both the revoke structure and the bufdata structure are quite similar.
They are basically small tags which are put on lists. In addition to
which the revoke structure is always allocated when there is a bufdata
structure which is (or can be) freed. As such it should be possible to
reduce the number of frees and allocations by using the same structure
for both purposes.

This patch is the first step along that path. It replaces existing uses
of the revoke structure with the bufdata structure.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:07 +01:00
Steven Whitehouse
d7b616e252 [GFS2] Clean up ordered write code
The following patch removes the ordered write processing from
databuf_lo_before_commit() and moves it to log.c. This has the effect of
greatly simplyfying databuf_lo_before_commit() and well as potentially
making the ordered write code more efficient.

As a side effect of this, its now possible to remove ordered buffers
from the ordered buffer list at any time, so we now make use of this in
invalidatepage and releasepage to ensure timely release of these
buffers.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:03 +01:00
Benjamin Marzinski
c4f68a130f [GFS2] delay glock demote for a minimum hold time
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second.  This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.

A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.

Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:55:48 +01:00
Steven Whitehouse
8fbbfd214c [GFS2] Reduce number of gfs2_scand processes to one
We only need a single gfs2_scand process rather than the one
per filesystem which we had previously. As a result the parameter
determining the frequency of gfs2_scand runs becomes a module
parameter rather than a mount parameter as it was before.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:55:08 +01:00
Robert Peterson
2332c4435b [GFS2] assertion failure after writing to journaled file, umount
This patch passes all my nasty tests that were causing the code to
fail under one circumstance or another.  Here is a complete summary
of all changes from today's git tree, in order of appearance:

1. There are now separate variables for metadata buffer accounting.
2. Variable sd_log_num_hdrs is no longer needed, since the header
   accounting is taken care of by the reserve/refund sequence.
3. Fixed a tiny grammatical problem in a comment.
4. Added a new function "calc_reserved" to calculate the reserved
   log space.  This isn't entirely necessary, but it has two benefits:
   First, it simplifies the gfs2_log_refund function greatly.
   Second, it allows for easier debugging because I could sprinkle the
   code with calls to this function to make sure the accounting is
   proper (by adding asserts and printks) at strategic point of the code.
5. In log_pull_tail there apparently was a kludge to fix up the
   accounting based on a "pull" parameter.  The buffer accounting is
   now done properly, so the kludge was removed.
6. File sync operations were making a call to gfs2_log_flush that
   writes another journal header.  Since that header was unplanned
   for (reserved) by the reserve/refund sequence, the free space had
   to be decremented so that when log_pull_tail gets called, the free
   space is be adjusted properly.  (Did I hear you call that a kludge?
   well, maybe, but a lot more justifiable than the one I removed).
7. In the gfs2_log_shutdown code, it optionally syncs the log by
   specifying the PULL parameter to log_write_header.  I'm not sure
   this is necessary anymore.  It just seems to me there could be
   cases where shutdown is called while there are outstanding log
   buffers.
8. In the (data)buf_lo_before_commit functions, I changed some offset
   values from being calculated on the fly to being constants.	That
   simplified some code and we might as well let the compiler do the
   calculation once rather than redoing those cycles at run time.
9. This version has my rewritten databuf_lo_add function.
   This version is much more like its predecessor, buf_lo_add, which
   makes it easier to understand.  Again, this might not be necessary,
   but it seems as if this one works as well as the previous one,
   maybe even better, so I decided to leave it in.
10. In databuf_lo_before_commit, a previous data corruption problem
   was caused by going off the end of the buffer.  The proper solution
   is to have the proper limit in place, rather than stopping earlier.
   (Thus my previous attempt to fix it is wrong).
   If you don't wrap the buffer, you're stopping too early and that
   causes more log buffer accounting problems.
11. In lops.h there are two new (previously mentioned) constants for
   figuring out the data offset for the journal buffers.
12. There are also two new functions, buf_limit and databuf_limit to
   calculate how many entries will fit in the buffer.
13. In function gfs2_meta_wipe, it needs to distinguish between pinned
   metadata buffers and journaled data buffers for proper journal buffer
   accounting.	It can't use the JDATA gfs2_inode flag because it's
   sometimes passed the "real" inode and sometimes the "metadata
   inode" and the inode flags will be random bits in a metadata
   gfs2_inode.	It needs to base its decision on which was passed in.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:47 +01:00
Steven Whitehouse
c8cdf47937 [GFS2] Recovery for lost unlinked inodes
Under certain circumstances its possible (though rather unlikely) that
inodes which were unlinked by one node while still open on another might
get "lost" in the sense that they don't get deallocated if the node
which held the inode open crashed before it was unlinked.

This patch adds the recovery code which allows automatic deallocation of
the inode if its found during block allocation (the sensible time to
look for such inodes since we are scanning the rgrp's bitmaps anyway at
this time, so it adds no overhead to do this).

Since the inode will have had its i_nlink set to zero, all we need to
trigger recovery is a lookup and an iput(), and the normal deallocation
code takes care of the rest.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:26 +01:00
Steven Whitehouse
bb8d8a6f54 [GFS2] Fix sign problem in quota/statfs and cleanup _host structures
This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).

The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.

The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.

This fixes Red Hat bz #239686

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:10 +01:00
Abhijith Das
2a87ab0806 [GFS2] Quotas non-functional - fix bug
This patch fixes an error in the quota code where a 'struct
gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a
'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from
fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion.

Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:26 +01:00
Steven Whitehouse
dbb7cae2a3 [GFS2] Clean up inode number handling
This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.

In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.

This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.

There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:24 +01:00
Robert Peterson
5f8820960c [GFS2] lockdump improvements
The patch below consists of the following changes (in code order):

1. I fixed a minor compiler warning regarding the printing of
   a kernel symbol address.
2. I implemented a suggestion from Dave Teigland that moves
   the debugfs information for gfs2 into a subdirectory so
   we can easily expand our use of debugfs in the future.
   The current code keeps the glock information in:
   /debug/gfs2/<fs>
   With the patch, the new code keeps the glock information in:
   /debug/gfs2/<fs>/glock
   That will allow us to create more debugfs files in the future.
3. This fixes a bug whereby a failed mount attempt causes the
   debugfs file to not be deleted.  Failed mount attempts should
   always clean up after themselves, including deleting the
   debugfs file and/or directory.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:33 +01:00
Robert Peterson
04b933f27b [GFS2] Red Hat bz 228540: owner references
In Testing the previously posted and accepted patch for
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228540
I uncovered some gfs2 badness.  It turns out that the current
gfs2 code saves off a process pointer when glocks is taken
in both the glock and glock holder structures.  Those
structures will persist in memory long after the process has
ended; pointers to poisoned memory.

This problem isn't caused by the 228540 fix; the new capability
introduced by the fix just uncovered the problem.

I wrote this patch that avoids saving process pointers
and instead saves off the process pid.  Rather than
referencing the bad pointers, it now does process lookups.
There is special code that makes the output nicer for
printing holder information for processes that have ended.

This patch also adds a stub for the new "sprint_symbol"
function that exists in Andrew Morton's -mm patch set, but
won't go into the base kernel until 2.6.22, since it adds
functionality but doesn't fix a bug.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:55 +01:00
Steven Whitehouse
3b8249f617 [GFS2] Fix bz 224480 and cleanup glock demotion code
This patch prevents the printing of a warning message in cases where
the fs is functioning normally by handing off responsibility for
unlinked, but still open inodes, to another node for eventual deallocation.
Also, there is now an improved system for ensuring that such requests
to other nodes do not get lost. The callback on the iopen lock is
only ever called when i_nlink == 0 and when a node is unable to deallocate
it due to it still being in use on another node. When a node receives
the callback therefore, it knows that i_nlink must be zero, so we mark
it as such (in gfs2_drop_inode) in order that it will then attempt
deallocation of the inode itself.

As an additional benefit, queuing a demote request no longer requires
a memory allocation. This simplifies the code for dealing with gfs2_holders
as it removes one special case.

There are two new fields in struct gfs2_glock. gl_demote_state is the
state which the remote node has requested and gl_demote_time is the
time when the request came in. Both fields are only valid when the
GLF_DEMOTE flag is set in gl_flags.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:39 +01:00
Robert Peterson
7c52b166c5 [GFS2] Add gfs2_tool lockdump support to gfs2 (bz 228540)
The attached patch resolves bz 228540.  This adds the capability
for gfs2 to dump gfs2 locks through the debugfs file system.
This used to exist in gfs1 as "gfs_tool lockdump" but it's missing from
gfs2 because all the ioctls were stripped out.  Please see the bugzilla
for more history about the fix.  This patch is also attached to the bugzilla
record.

The patch is against Steve Whitehouse's latest nmw git tree kernel
(2.6.21-rc1) and has been tested on system trin-10.

Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:29 +01:00
Steven Whitehouse
631c42e170 [GFS2] go_drop_bh is never used, so remove it
The ->go_drop_bh function is never used, so this removes it and the single
caller,

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-07 14:02:53 -05:00
Steven Whitehouse
04b159b132 [GFS2] Remove unused variable
Remove an unused variable.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-07 14:02:30 -05:00
Steven Whitehouse
b5d32bead1 [GFS2] Tidy up glops calls
This patch doesn't make any changes to the ordering of the various
operations related to glocking, but it does tidy up the calls to the
glops.c functions to make the structure more obvious.

The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be
made static within glock.c since they are called by every set of glock
operations. The xmote_th and drop_th glock operations are then made
conditional upon those two routines existing and called from the
previously mentioned functions in glock.c respectively.

Also it can be seen that the go_sync operation isn't needed since it can
easily be replaced by calls to xmote_bh and drop_bh respectively. This
results in no longer (confusingly) calling back into routines in glock.c
from glops.c and also reducing the glock operations by one member.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:26 -05:00
Steven Whitehouse
6bd9c8c2fb [GFS2] Remove unused go_callback operation
This is never used, so we might as well remove it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:17 -05:00