Commit Graph

15 Commits

Author SHA1 Message Date
Andre Noll
09c9e5fa1b md: convert conf->chunk_size and conf->prev_chunk to sectors.
This kills some more shifts.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:45:55 +10:00
NeilBrown
070ec55d07 md: remove mddev_to_conf "helper" macro
Having a macro just to cast a void* isn't really helpful.
I would must rather see that we are simply de-referencing ->private,
than have to know what the macro does.

So open code the macro everywhere and remove the pointless cast.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 16:54:21 +10:00
NeilBrown
c8f517c444 md/raid5 revise rules for when to update metadata during reshape
We currently update the metadata :
 1/ every 3Megabytes
 2/ When the place we will write new-layout data to is recorded in
    the metadata as still containing old-layout data.

Rule one exists to avoid having to re-do too much reshaping in the
face of a crash/restart.  So it should really be time based rather
than size based.  So change it to "every 10 seconds".

Rule two turns out to be too harsh when restriping an array
'in-place', as in that case the metadata much be updates for every
stripe.
For the in-place update, it can only possibly be safe from a crash if
some user-space program data a backup of every e.g. few hundred
stripes before allowing them to be reshaped.  In that case, the
constant metadata update is pointless.
So only update the metadata if the new metadata will report that the
end of the 'old-layout' data is beyond where we are currently
writing 'new-layout' data.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:28:40 +11:00
NeilBrown
e183eaedd5 md/raid5: prepare for allowing reshape to change layout
Add prev_algo to raid5_conf_t along the same lines as prev_chunk
and previous_raid_disks.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:20:22 +11:00
NeilBrown
784052ecc6 md/raid5: prepare for allowing reshape to change chunksize.
Add "prev_chunk" to raid5_conf_t, similar to "previous_raid_disks", to
remember what the chunk size was before the reshape that is currently
underway.

This seems like duplication with "chunk_size" and "new_chunk" in
mddev_t, and to some extent it is, but there are differences.
The values in mddev_t are always defined and often the same.
The prev* values are only defined if a reshape is underway.

Also (and more significantly) the raid5_conf_t values will be changed
at the same time (inside an appropriate lock) that the reshape is
started by setting reshape_position.  In contrast, the new_chunk value
is set when the sysfs file is written which could be well before the
reshape starts.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:19:07 +11:00
NeilBrown
86b42c713b md/raid5: clearly differentiate 'before' and 'after' stripes during reshape.
During a raid5 reshape, we have some stripes in the cache that are
'before' the reshape (and are still to be processed) and some that are
'after'.  They are currently differentiated by having different
->disks values as the only reshape current supported involves changing
the number of disks.

However we will soon support reshapes that do not change the number
of disks (chunk parity or chunk size).  So make the difference more
explicit with a 'generation' number.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:19:03 +11:00
NeilBrown
fef9c61fdf md/raid5: change reshape-progress measurement to cope with reshaping backwards.
When reducing the number of devices in a raid4/5/6, the reshape
process has to start at the end of the array and work down to the
beginning.  So we need to handle expand_progress and expand_lo
differently.

This patch renames "expand_progress" and "expand_lo" to avoid the
implication that anything is getting bigger (expand->reshape) and
every place they are used, we make sure that they are used the right
way depending on whether delta_disks is positive or negative.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:16:46 +11:00
NeilBrown
34e04e87fb md/raid5: drop qd_idx from r6_state
We now have this value in stripe_head so we don't need to duplicate
it.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:10:16 +11:00
Dan Williams
f701d589aa md/raid6: move raid6 data processing to raid6_pq.ko
Move the raid6 data processing routines into a standalone module
(raid6_pq) to prepare them to be called from async_tx wrappers and other
non-md drivers/modules.  This precludes a circular dependency of raid456
needing the async modules for data processing while those modules in
turn depend on raid456 for the base level synchronous raid6 routines.

To support this move:
1/ The exportable definitions in raid6.h move to include/linux/raid/pq.h
2/ The raid6_call, recovery calls, and table symbols are exported
3/ Extra #ifdef __KERNEL__ statements to enable the userspace raid6test to
   compile

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 15:09:39 +11:00
NeilBrown
91adb56473 md/raid5: refactor raid5 "run"
.. so that the code to create the private data structures is separate.
This will help with future code to change the level of an active
array.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:39 +11:00
NeilBrown
67cc2b8165 md/raid5: finish support for DDF/raid6
DDF requires RAID6 calculations over different devices in a different
order.
For md/raid6, we calculate over just the data devices, starting
immediately after the 'Q' block.
For ddf/raid6 we calculate over all devices, using zeros in place of
the P and Q blocks.

This requires unfortunately complex loops...

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:38 +11:00
NeilBrown
99c0fb5f92 md/raid5: Add support for new layouts for raid5 and raid6.
DDF uses different layouts for P and Q blocks than current md/raid6
so add those that are missing.
Also add support for RAID6 layouts that are identical to various
raid5 layouts with the simple addition of one device to hold all of
the 'Q' blocks.
Finally add 'raid5' layouts to match raid4.
These last to will allow online level conversion.

Note that this does not provide correct support for DDF/raid6 yet
as the order in which data blocks are summed to produce the Q block
is significant and different between current md code and DDF
requirements.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:38 +11:00
NeilBrown
d0dabf7e57 md/raid6: remove expectation that Q device is immediately after P device.
Code currently assumes that the devices in a raid6 stripe are
  0 1 ... N-1 P Q
in some rotated order.  We will shortly add new layouts in which
this strict pattern is broken.
So remove this expectation.  We still assume that the data disks
are roughly in-order.  However P and Q can be inserted anywhere within
that order.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:39:38 +11:00
NeilBrown
bff61975b3 md: move lots of #include lines out of .h files and into .c
This makes the includes more explicit, and is preparation for moving
md_k.h to drivers/md/md.h

Remove include/raid/md.h as its only remaining use was to #include
other files.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:33:13 +11:00
Christoph Hellwig
ef740c372d md: move headers out of include/linux/raid/
Move the headers with the local structures for the disciplines and
bitmap.h into drivers/md/ so that they are more easily grepable for
hacking and not far away.  md.h is left where it is for now as there
are some uses from the outside.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 14:27:03 +11:00