Commit Graph

47 Commits

Author SHA1 Message Date
Ed Lin
cce9c8aed7 [SCSI] stex: update version to 4.6.0000.4
Update version to 4.6.0000.4.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:27 -04:00
Ed Lin
9eb46d2a08 [SCSI] stex: add support for reset request from firmware
Add support for reset request from firmware for controllers
of st_shasta and st_yel type. Code adjustments necessary
for this change are also included.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:26 -04:00
Ed Lin
cbacfb5fd9 [SCSI] stex: add small dma buffer support
The controllers of st_seq and st_vsc type can work
if only small dma buffer is available, with a reduced
firmware feature set. Add support for this case.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:25 -04:00
Ed Lin
69cb48750b [SCSI] stex: Add reset code for st_yel (v2)
Add reset related code for st_yel.
1. Set the SS_H2I_INT_RESET bit.
2. Wait for the SS_MU_OPERATIONAL flag. This is also part of
   normal handshake process so move it to handshake routine.
3. Continue handshake with the firmware.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 08:50:41 -05:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Ed Lin
05b4460bd4 [SCSI] stex: update version to 4.6.0000.3
Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:10 -05:00
Ed Lin
0f3f6ee68f [SCSI] stex: add new 6G controller support
This adds the support of a new SAS 6G controller (st_yel)

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:09 -05:00
Ed Lin
591a3a5f60 [SCSI] stex: use config struct for parameters of different controllers
Use config struct (st_card_info) for parameters of different controllers

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:09 -05:00
Ed Lin
99946f8141 [SCSI] stex: add MSI support
This adds the MSI support (default 0=off)

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:09 -05:00
Ed Lin
f149816162 [SCSI] stex: small code fixes and changes
These are some small code fixes and changes, including:
- use 64 bit when possible
- remove some unnecessary code (in interrupt, queuecommand routine etc.)
- code change for reset handler

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:08 -05:00
Ed Lin - PTU
bd5cd9cdc5 [SCSI] stex: Version update
Update version to 4.6.0000.1

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:04 -05:00
Ed Lin - PTU
7cfe99a526 [SCSI] stex: Small fixes
Some small fixes, including:
- add data direction in req_msg because new firmware version
  may require this (backward compatible)
- change internal timeout value
- change judgment of type st_vsc1
- blank line handling, etc.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:04 -05:00
Ed Lin - PTU
e8a091b36c [SCSI] stex: Fix for controller type st_yosemite
This is the fix for controller type st_yosemite, including
- max_lun is 256 (backward compatible)
- remove unneeded special handling of INQUIRY
- remove unnecessary listing of sub device ids

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:04 -05:00
Ed Lin - PTU
62e5b3d850 [SCSI] stex: Add new device id
Add new device id for controller type st_seq.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:03 -05:00
Ed Lin - PTU
dd48ebf7ca [SCSI] stex: Fix for potential invalid response
The interrupt routine is good for normal cases. However, if the firmware
is abnormal and returns an invalid response, the driver may reuse a
ccb structure that has already been handled. This may cause problem.
Fix this by setting the req member to NULL. Next time we know the
response is invalid and handle accordingly if req is NULL.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:03 -05:00
Arjan van de Ven
25729a7fb8 [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar()
Use the newly introduced pci_ioremap_bar() function in drivers/scsi.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Brian King <brking@us.ibm.com>
Cc: Ed Lin <ed.lin@promise.com>
Cc: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:11 -06:00
James Bottomley
dc5c49bff3 [SCSI] stex: switch to block timeout
stex sets the timeout in its slave configure routine for all devices.
This now needs to update the request queue timeout in block.

Cc: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-01 11:16:27 -06:00
Mike Christie
5d90027fb5 [SCSI] stex: fix queue depth setting
We want to set the queue depth to something reasonable - not
the can_queue.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:49 -04:00
FUJITA Tomonori
11002fbcb4 [SCSI] stex: use scsi_build_sense_buffer
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:02 -05:00
FUJITA Tomonori
31fe47d437 [SCSI] stex: use sg buffer copy helper functions
This replaces stex_internal_copy with scsi_sg_copy_to/from_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
c9872fe1ad [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb
stex_internal_copy copies an in-kernel buffer to a sg list by using
scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with
sg_count in struct st_ccb, which is the value that dma_map_sg
returned. However it might be shorter than the actual number of sg
entries (if the IOMMU merged the sg entries).

scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy
should be called with the actual number of sg entries
(i.e. scsi_sg_count), because if the sg entries were merged,
stex_direct_copy wrongly think that the data length in the sg list is
shorter than the actual length.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:20:59 -06:00
FUJITA Tomonori
26106e3ca3 [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg
stex_direct_copy copies an in-kernel buffer to a sg list in order to
spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then
stex_internal_copy with the value that dma_map_sg returned. It calls
scsi_kmap_atomic_sg to copy data.

scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges
sg entries, stex_internal_copy gets the smaller number of sg entries
than the acutual number, which means it wrongly think that the data
length in the sg list is shorter than the actual length.

stex_direct_copy shouldn't call dma_map_sg and it doesn't need since
this code path doesn't involve dma transfers. This patch removes
stex_direct_copy and simply calls stex_internal_copy with the actual
number of sg entries.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:20:39 -06:00
James Bottomley
d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00
FUJITA Tomonori
9cb83c7529 [SCSI] add use_sg_chaining option to scsi_host_template
This option is true if a low-level driver can support sg
chaining. This will be removed eventually when all the drivers are
converted to support sg chaining. q->max_phys_segments is set to
SCSI_MAX_SG_SEGMENTS if false.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:24:32 +02:00
Ed Lin
968a5763fb [SCSI] stex: use resid for xfer len information
The original implementation in stex_ys_commands() is inappropriate.
For xfer len information, we should use resid instead.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:59:10 -05:00
James Bottomley
5bc65793cb [SCSI] Merge up to linux-2.6 head
Conflicts:

	drivers/scsi/jazz_esp.c

Same changes made by both SCSI and SPARC trees: problem with UTF-8
conversion in the copyright.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 23:57:05 -05:00
FUJITA Tomonori
d5587d5dcd [SCSI] stex: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29 22:49:59 -05:00
Ed Lin
c25da0afa7 [SCSI] stex: minor cleanup and version update
Add debug information into abort and host_reset routine.
Change ioremap to ioremap_nocache.
Version updated to 3.6.0000.1.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 12:41:39 -04:00
Ed Lin
d116a7bc6a [SCSI] stex: fix reset recovery for console device
After reset completed, the scsi error handler sends out TEST_UNIT_READY
to the device. For 'normal' devices the command will be handled by firmware.
However, because the RAID console only interfaces to scsi mid layer, the
firmware will not process the command for it. This will make the console to
be offlined right after reset. Add the handling in driver to fix this problem.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 12:41:23 -04:00
Ed Lin
69f4a51391 [SCSI] stex: extend hard reset wait time
During hard bus reset of st_shasta controllers, 1 ms is not enough for
16-port controllers, although it's good for 8-port controllers.  Extend the
wait time to 100  ms to allow bus resets finish successfully.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 12:40:51 -04:00
Ed Lin
e0b2e597d5 [SCSI] stex: fix id mapping issue
The correct internal mapping of stex controllers should be:
id:0~15, lun:0~7 (st_shasta)
id:0, lun:0~127 (st_yosemite)
id:0~127, lun:0 (st_vsc and st_vsc1)

This patch reports the internal mapping to scsi mid layer,  eliminating
the translation between scsi mid layer and firmware. To achieve this
goal, we also need to:
-- fail the REPORT_LUNS command for st_shasta because the
   firmware is known to not report all actual luns
-- add an entry in scsi_devindo.c to force sequential lun scan
   (for st_shasta controllers)
-- fail the REPORT_LUNS command for console device
-- remove special handling of REPORT_LUNS command for
   st_yosemite, as there is no translation mapping now

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16 12:40:21 -04:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Ed Lin
febb631c11 [SCSI] stex: version update
Update version to 3.1.0.1

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:33:58 -06:00
Ed Lin
76fbf96f82 [SCSI] stex: change wait loop code
The original wait loop may be much longer than intended time.
Use more accurate timer_after for it. Also adjust wait value to
avoid unnecessary long waiting.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:33:38 -06:00
Ed Lin
94e9108b5a [SCSI] stex: add new device type support
Add support for st_vsc1 type device (st_vsc is ok because it does not
require extra buffer).

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:33:24 -06:00
Ed Lin
ee926b27a0 [SCSI] stex: update device id info
- add comments for various devices
- remove unused device ids(0xf350, 0x4301, 0x8301, 0x8302)
- add new device id(0xe350)
- fix vendor id of st_vsc
- modify Kconfig help info

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:33:06 -06:00
Ed Lin
529e7a62c8 [SCSI] stex: adjust default queue length
Firmware of new version may adjust default queue length. It is
backward compatible.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:32:46 -06:00
Ed Lin
47c4f997c7 [SCSI] stex: add value check in hard reset routine
During hard reset, an all-1 value from PCI_COMMAND should be invalid.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:32:30 -06:00
Ed Lin
4eea9dc45f [SCSI] stex: fix controller_info command handling
This command needs information from both firmware and driver. First copy
information from firmware to buffer, then fill in driver information.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:31:43 -06:00
Ed Lin
b4b8bed123 [SCSI] stex: fix biosparam calculation
Fix biosparam calculation.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-05 11:31:26 -06:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Ed Lin
fb4f66be59 [SCSI] stex: add new device (id 0x8650) support
A new device (id 0x8650, nickname 'yosemite') support is added.
It's basically the same, except for following items:
- mapping of id and lun by firmware
- special handling for some commands in interrupt routine
- change of internal copy function for these special commands
- different reset handling code
- different shutdown notification command

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:05:52 -05:00
Ed Lin
f903d7b7a8 [SCSI] stex: cancel unused field in struct req_msg
The payload_sz field in struct req_msg is not big enough to indicate
the size of req_msg, as its type is u8.
It is confirmed that this field is not used by firmware, so cancel
it here.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-01 15:05:38 -05:00
James Bottomley
deb81d80ba [SCSI] add failure return to scsi_init_shared_tag_map()
And use it in the stex driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:57:28 -05:00
Ed Lin
cf355883f5 [SCSI] stex: add shared tags from block
Use block shared tags entirely within the driver. In the case of
shutdown, assume that there are no other outstanding commands, so tag
0 is fine.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:57:02 -05:00
Jeff Garzik
5a25ba1677 [SCSI] Add Promise SuperTrak driver
Add Promise SuperTrak 'stex' driver, supporting SuperTrak
EX8350/8300/16350/16300 controllers.  The controller's firmware accepts
SCSI commands, handing them to the underlying RAID or JBOD disks.

The driver consisted of the following cleanups and fixes, beyond its
initial submission:

Ed Lin:
      stex: cleanup and minor fixes
      stex: add new device ids
      stex: update internal copy code path
      stex: add hard reset function
      stex: adjust command timeout in slave_config routine
      stex: use more efficient method for unload/shutdown flush

Jeff Garzik:
      [SCSI] Add Promise SuperTrak 'shasta' driver.
      Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX").
      [SCSI] stex: update with community comments from 'Promise SuperTrak' thread
      [SCSI] stex: Fix warning, trim trailing whitespace.
      [SCSI] stex: remove last remnants of "shasta" project code name
      [SCSI] stex: removed 6-byte command emulation
      [SCSI] stex: minor cleanups
      [SCSI] stex: minor fixes: irq flag, error return value
      [SCSI] stex: use dma_alloc_coherent()

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:54:02 -05:00