Commit Graph

14725 Commits

Author SHA1 Message Date
Thomas Gleixner
cc75b92d11 genirq: mark io_apic level interrupts to avoid resend
Level type interrupts do not need to be resent.  It was also found that
some chipsets get confused in case of the resend.

Mark the ioapic level type interrupts as such to avoid the resend
functionality in the generic irq code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 11:05:45 -07:00
Linus Torvalds
963c6527e0 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits)
  ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOS
  ACPI: thermal: create "thermal.act=" to disable or override active trip point
  ACPI: thermal: create "thermal.nocrt" to disable critical actions
  ACPI: thermal: create "thermal.psv=" to override passive trip points
  ACPI: thermal: expose "thermal.tzp=" to set global polling frequency
  ACPI: thermal: create "thermal.off=1" to disable ACPI thermal support
  ACPI: thinkpad-acpi: fix sysfs paths in documentation
  ACPI: static
  ACPI EC: remove potential deadlock from EC
  ACPI: dock: Send key=value pair instead of plain value
  ACPI: bay: send envp with uevent - fix
  acpi-cpufreq: Fix some x86/x86-64 acpi-cpufreq driver issues
  ACPI: fix "Time Problems with 2.6.23-rc1-gf695baf2"
  ACPI: thinkpad-acpi: change thinkpad-acpi input default and kconfig help
  ACPI: EC: fix run-together printk lines
  ACPI: sbs: remove dead code
  ACPI: EC: acpi_ec_remove(): fix use-after-free
  ACPI: EC: Switch from boot_ec as soon as we find its desc in DSDT.
  ACPI: EC: fix build warning
  ACPI: EC: If ECDT is not found, look up EC in DSDT.
  ...
2007-08-12 02:58:23 -07:00
Linus Torvalds
c1502e2834 i386: Fix broken mmiocfg accesses
Commit 3320ad994a broke mmio config space
accesses totally on i386 - it dropped the "reg" offset to the address.

Cc: dean gaudet <dean@arctic.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 02:23:16 -07:00
Petr Vandrovec
b8d3f2448b Do not replace whole memcpy in apply alternatives
apply_alternatives uses memcpy() to apply alternatives.  Which has the
unfortunate effect that while applying memcpy alternative to memcpy
itself it tries to overwrite itself with nops - which causes #UD fault
as it overwrites half of an instruction in copy loop, and from this
point on only possible outcome is triplefault and reboot.

So let's overwrite only first two instructions of memcpy - as long as
the main memcpy loop is not in first two bytes it will work fine.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12 01:42:37 -07:00
Len Brown
27196c30db Pull processor into release branch 2007-08-12 00:21:08 -04:00
Linus Torvalds
3864e8ccbb Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] monwriter: Serialization bug for multithreaded applications.
  [S390] vmur: diag14 only works with buffers below 2GB
  [S390] vmur: add "top of queue" sanity check for reader open
  [S390] vmur: reject open on z/VM reader files with status HOLD
  [S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happy
  [S390] vmur: allocate single record buffers instead of one big data buffer
  [S390] remove DEFAULT_MIGRATION_COST
  [S390] qdio: make sure data structures are correctly aligned.
  [S390] hypfs: implement show_options
  [S390] cio: avoid memory leak on error in css_alloc_subchannel().
2007-08-11 16:18:58 -07:00
Linus Torvalds
75ecb1a4d1 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix size check for hugetlbfs
  [POWERPC] Fix initialization and usage of dma_mask
  [POWERPC] Fix more section mismatches in head_64.S
  [POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC"
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove text saying PS3 support is incomplete
  [POWERPC] PS3: Fix storage probe logic
  [POWERPC] cell: Move SPU affinity init to spu_management_of_ops
  [POWERPC] Fix potential duplicate entry in SLB shadow buffer
2007-08-11 16:09:49 -07:00
Chuck Ebbert
3dab307e52 i386: Fix double fault handler
The new percpu code has apparently broken the doublefault handler
when CONFIG_DEBUG_SPINLOCK is set. Doublefault is handled by
a hardware task, making the check

        SPIN_BUG_ON(lock->owner == current, lock, "recursion");

fault because it uses the FS register to access the percpu data
for current, and that register is zero in the new TSS. (The trace
I saw was on 2.6.20 where it was GS, but it looks like this will
still happen with FS on 2.6.22.)

Initializing FS in the doublefault_tss should fix it.

AK: Also fix broken ptr_ok() and turn printks into KERN_EMERG
AK: And add a PANIC prefix to make clear the system will hang
AK: (e.g. x86-64 will recover)

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:14 -07:00
Andi Kleen
5fe4486c79 i386: Fix start_kernel warning
Fix

WARNING: vmlinux.o(.text+0x183): Section mismatch: reference to .init.text:start_kernel (between 'is386' and 'check_x87')

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:14 -07:00
Pete Zaitcev
1f1014896d x86_64: vdso.lds in arch/x86_64/vdso/.gitignore
Create arch/x86_64/vdso/.gitignore and put vdso.lds into it.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:14 -07:00
Andi Kleen
d3f7eae182 i386: Use global flag to disable broken local apic timer on AMD CPUs.
The Averatec 2370 and some other Turion laptop BIOS seems to program the
ENABLE_C1E MSR inconsistently between cores. This confuses the lapic
use heuristics because when C1E is enabled anywhere it seems to affect
the complete chip.

Use a global flag instead of a per cpu flag to handle this.
If any CPU has C1E enabled disabled lapic use.

Thanks to Cal Peake for debugging.

Cc: tglx@linutronix.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:13 -07:00
Adrian Bunk
d2d0251f6f i386: really stop MCEs during code patching
It's CONFIG_X86_MCE, not CONFIG_MCE.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:13 -07:00
Zachary Amsden
08da5a2ca4 x86_64: Early segment setup for VT
VT is very picky about when it can enter execution.
Get all segments setup and get LDT and TR into valid state to allow
VT execution under VMware and KVM (untested).

This makes the boot decompression run under VT, which makes it several
orders of magnitude faster on 64-bit Intel hardware.

Before, I was seeing times up to a minute or more to decompress a 1.3MB kernel
on a very fast box.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:13 -07:00
Andi Kleen
ab144f5ec6 i386: Make patching more robust, fix paravirt issue
Commit 19d36ccdc3 "x86: Fix alternatives
and kprobes to remap write-protected kernel text" uses code which is
being patched for patching.

In particular, paravirt_ops does patching in two stages: first it
calls paravirt_ops.patch, then it fills any remaining instructions
with nop_out().  nop_out calls text_poke() which calls
lookup_address() which calls pgd_val() (aka paravirt_ops.pgd_val):
that call site is one of the places we patch.

If we always do patching as one single call to text_poke(), we only
need make sure we're not patching the memcpy in text_poke itself.
This means the prototype to paravirt_ops.patch needs to change, to
marshal the new code into a buffer rather than patching in place as it
does now.  It also means all patching goes through text_poke(), which
is known to be safe (apply_alternatives is also changed to make a
single patch).

AK: fix compilation on x86-64 (bad rusty!)
AK: fix boot on x86-64 (sigh)
AK: merged with other patches

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:13 -07:00
Andi Kleen
d3f3c93469 x86: Disable CLFLUSH support again
It turns out CLFLUSH support is still not complete; we
flush the wrong pages.  Again disable it for the release.
Noticed by Jan Beulich who then also noticed a stupid typo later.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:13 -07:00
Murillo Fernandes Bernardes
f055a0619a x86_64: Calgary - Fix mis-handled PCI topology
Current code assumed that devices were directly connected to a Calgary
bridge, as it tried to get the iommu table directly from the parent bus
controller.

When we have another bridge between the Calgary/CalIOC2 bridge and the
device we should look upwards until we get to the top (Calgary/CalIOC2
bridge), where the iommu table resides.

Signed-off-by: Murillo Fernandes Bernardes <mfb@br.ibm.com>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:12 -07:00
dean gaudet
3320ad994a x86: Work around mmio config space quirk on AMD Fam10h
Some broken devices have been discovered to require %al/%ax/%eax registers
for MMIO config space accesses.  Modify mmconfig.c to use these registers
explicitly (rather than modify the global readb/writeb/etc inlines).

AK: also changed i386 to always use eax
AK: moved change to extended space probing to different patch
AK: reworked with inlines according to Linus' requirements.
AK: improve comments.

Signed-off-by: dean gaudet <dean@arctic.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:58:12 -07:00
Muli Ben-Yehuda
73c59afc65 finish i386 and x86-64 sysdata conversion
This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs.  It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:

- introduce pci_scan_bus_with_sysdata() and use it instead of
  pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
  allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
  sysdata work is to make it easy to do root-bus specific things
  (e.g., support PCI domains and IOMMU's). I dislike using a default
  struct pci_sysdata in some places and a dynamically allocated
  pci_sysdata elsewhere - the potential for someone indavertantly
  changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
  always initialized to -1. Patches to do the right thing with regards
  to the NUMA node can build on top of this (either add a 'node'
  parameter to pci_scan_bus_with_sysdata() or just update the node
  when it becomes known).

The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64.  Unfortunately none of my
machines exhibited the bugs so caveat emptor.

Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Jay Estabrook
f6901e6398 alpha: -Werror fixes for sys_titan.c
This code corrects the usage of the request_irq() routine.

Signed-off-by: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:42 -07:00
Adrian Bunk
4a2a4da439 cris: drivers/cdrom/Kconfig no longer exists
scripts/kconfig/conf -d arch/cris/Kconfig
arch/cris/Kconfig:183: can't open file "drivers/cdrom/Kconfig"

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:41 -07:00
David Howells
60c9834238 FRV: connect up fallocate
Connect up the fallocate() system call.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:40 -07:00
Robin Holt
b291aa7a65 x86_64: fix HPET init race
I have had four seperate system lockups attributable to this exact problem
in two days of testing.  Instead of trying to handle all the weird end
cases and wrap, how about changing it to look for exactly what we appear
to want.

The following patch removes a couple races in setup_APIC_timer.  One occurs
when the HPET advances the COUNTER past the T0_CMP value between the time
the T0_CMP was originally read and when COUNTER is read.  This results in
a delay waiting for the counter to wrap.  The other results from the counter
wrapping.

This change takes a snapshot of T0_CMP at the beginning of the loop and
simply loops until T0_CMP has changed (a tick has happened).

<later>

I have one small concern about the patch.  I am not sure it meets the intent
as well as it should.  I think we are trying to match APIC timer interrupts up
with the hpet counter increment.  The event which appears to be disturbing
this loop in our test environment is the NMI watchdog.  What we believe has
been happening with the existing code is the setup_APIC_timer loop has read
the CMP value, and the NMI watchdog code fires for the first time.  This
results in a series of icache miss slowdowns and by the time we get back to
things it has wrapped.

I think this code is trying to get the CMP as close to the counter value as
possible.  If that is the intent, maybe we should really be testing against a
"window" around the CMP.  Something like COUNTER = CMP+/2.  It appears COUNTER
should get advanced every 89nSec (IIRC).  The above seems like an unreasonably
small window, but may be necessary.  Without documentation, I am not sure of
the original intent with this code.

In summary, this code fixes my boot hangs, but since I am not certain of the
intent of the existing code, I am not certain this has not introduced new bugs
or unexpected behaviors.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Andi Kleen <ak@suse.de>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: "Aaron Durbin" <adurbin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:39 -07:00
Bryan Wu
d31c5ab147 Blackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin arch
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:39 -07:00
Heiko Carstens
6d740a438f [S390] remove DEFAULT_MIGRATION_COST
0437e109e1 removes the migration
cost init code. Remove the s390 leftovers as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:37 +02:00
Michael Holzheu
b01af5ba91 [S390] hypfs: implement show_options
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:36 +02:00
Benjamin Herrenschmidt
d1f5a77f2c [POWERPC] Fix size check for hugetlbfs
My "slices" address space management code that was added in the 2.6.22
implementation of get_unmapped_area() doesn't properly check that the
size is a multiple of the requested page size.  This allows userland to
create VMAs that aren't a multiple of the huge page size with hugetlbfs
(since hugetlbfs entirely relies on get_unmapped_area() to do that
checking) which leads to a kernel BUG() when such areas are torn down.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Benjamin Herrenschmidt
8f2ea1fd3f [POWERPC] Fix initialization and usage of dma_mask
powerpc has a couple of bugs in the usage of dma_masks that tend to
break when drivers explicitly try to set a 32-bit mask for example.

First, the code that generates the pci devices from the OF device-tree
doesn't initialize the mask properly, then our implementation of
set_dma_mask() was trying to validate the -previous- mask value, not the
one passed in as an argument.

This fixes these problems.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Stephen Rothwell
939e60f680 [POWERPC] Fix more section mismatches in head_64.S
WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start')
WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common')
WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common')
WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:41 +10:00
Kim Phillips
3c5ede8cc6 [POWERPC] Revert "[POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC"
This reverts commit 3baee95595.

That commit was a mistake from the start; I added mdio type to the
bus scan list early on in my ucc_geth migrate to phylib development,
which is just pure wrong (the ucc_geth_mii driver creates the mii
bus and the PHY layer handles PHY enumeration without translation).

This follows on from commit 77926826f3:

 Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"

which was basically trying to hide a symptom of the original mistake
this revert fixes.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
geoffrey.levand@am.sony.com
bd948b0377 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
Geoff Levand
332a7b3e93 [POWERPC] PS3: Remove text saying PS3 support is incomplete
Remove the Kconfig message that indicates the PS3 platform support is
incomplete.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:22 +10:00
Geert Uytterhoeven
edd2a9d185 [POWERPC] PS3: Fix storage probe logic
Fix the PS3 storage probe logic to properly find device regions on cold
startup.

 o Change the storage probe event mask from notify_device_ready
   to notify_region_update.
 o Improve the storage probe error handling.
 o Change ps3_storage_wait_for_device() to use a temporary variable to hold
   the buffer address.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Andre Detsch
f5996449e3 [POWERPC] cell: Move SPU affinity init to spu_management_of_ops
This patch moves affinity initialization code from spu_base.c to a
new spu_management_of_ops function (init_affinity), which is empty
in the case of PS3. This fixes a linking problem that was happening
when compiling for PS3.
Also, some small code style changes were made.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Paul Mackerras
edd0622bd2 [POWERPC] Fix potential duplicate entry in SLB shadow buffer
We were getting a duplicate entry in the SLB shadow buffer in
slb_flush_and_rebolt() if the kernel stack was in the same segment
as PAGE_OFFSET, which on POWER6 causes the hypervisor to terminate
the partition with an error.  This fixes it.

Also we were not creating an SLB entry (or an SLB shadow buffer
entry) for the kernel stack on secondary CPUs when starting the
CPU.  This isn't a major problem, since an appropriate entry will
be created on demand, but this fixes that also for consistency.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:07 +10:00
David S. Miller
b434e71933 [SPARC64]: Fix memory leak when cpu hotplugging.
Every time a cpu is added via hotplug, we allocate the per-cpu MONDO
queues but we never free them up.  Freeing isn't easy since the first
cpu gets this memory from bootmem.

Therefore, the simplest thing to do to fix this bug is to allocate the
queues for all possible cpus at boot time.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-08 17:33:52 -07:00
David S. Miller
6c70b6fc7b [SPARC64]: Do not assume sun4v chips have load-twin/store-init support.
Check the cpu type in the OBP device tree before committing to
using the optimized Niagara memcpy and memset implementation.

If we don't recognize the cpu type, use a completely generic
version.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-08 17:33:45 -07:00
David S. Miller
68c9f9fd33 [SPARC64]: Fix hard-coding of cpu type output in /proc/cpuinfo on sun4v.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-07 19:09:29 -07:00
David S. Miller
46bcea7751 [SPARC]: Centralize find_in_proplist() instead of duplicating N times.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-07 18:46:36 -07:00
Fenghua Yu
501092929c acpi-cpufreq: Fix some x86/x86-64 acpi-cpufreq driver issues
This patch addresses some issues in x86/x86-64 acpi-cpufreq driver:

1.  Current memory allocation for acpi_perf_data is actually open-coded
   alloc_percpu().  The patch defines and handles acpi_perf_data as percpu
   data.  The code will be cleaner and easier to be maintained with this
   change.

2. Won't load driver in acpi_cpufreq_early_init() failure case.

3. Add __init for acpi_cpufreq_early_init().

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-07 18:40:30 -04:00
Russell King
6e7d934060 [ARM] rpc: update defconfig
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-06 16:48:49 +01:00
Jan Altenberg
b8b786098b [ARM] 4542/1: AT91: include atmel_lcdc.h in at91sam926{1,3}_devices.c
- Include atmel_lcdc.h in at91sam926{1,3}_devices.c

Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-04 22:13:48 +01:00
Dan Williams
581cf23b51 [ARM] 4541/1: iop: defconfig updates
With the availability of the iop-adma driver iop platforms can now use
their offload engines for md-raid5 (copy+xor) and net-dma (tcp receive
copy) offload.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-04 22:13:47 +01:00
Linus Torvalds
22da317629 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fixes for the SLB shadow buffer code
  [POWERPC] Fix a compile warning in powermac/feature.c
  [POWERPC] Fix a compile warning in pci_32.c
  [POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
  [POWERPC] Fix num_cpus calculation in smp_call_function_map()
  [POWERPC] ps3: Fix section mismatch in ps3/setup.c
  [POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
  [POWERPC] Fix special PTE code for secondary hash bucket
  [POWERPC] Expand RPN field to 34 bits when using 64k pages
2007-08-03 15:16:33 -07:00
Linus Torvalds
34bac238cc Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: fix defconfigs for sh7751r boards
  sh: fix cf support on r2d boards
  sh: update r2d defconfig
  sh: update snapgear defconfig.
  sh: Fix SH-X3 FPU exception handling.
  sh: Fix pgd mismatch from cached TTB in unhandled fault.
  sh: Don't include fault-nommu on SH-2/SH-2A.
  sh: Fix irqflags tracing for SH-3/4 nommu.
  sh: Fix lockdep debugging oops on SH-3/4.
2007-08-03 15:07:10 -07:00
David S. Miller
0a808a3131 [SPARC32]: Fix modular build of floppy driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03 14:08:42 -07:00
Michael Neuling
67439b76f2 [POWERPC] Fixes for the SLB shadow buffer code
On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area.  However, we never updated with SLB shadow buffer.
This fixes it.  Thanks to paulus for finding this.

Also added some write barriers to ensure the shadow buffer contents
are always consistent.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Segher Boessenkool
5628244059 [POWERPC] Fix a compile warning in powermac/feature.c
...by using the pci_get API instead of the deprecated old stuff.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Segher Boessenkool
3a77d291be [POWERPC] Fix a compile warning in pci_32.c
__must_check, so do so.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Michael Ellerman
b9c3fdb0f0 [POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
Some new machines use the "ibm,dynamic-reconfiguration-memory" property
to provide memory layout information, rather than via memory nodes.

There is a bug in the code to parse this property for start addresses
over 4GB; we store the start address in an unsigned int, which means
we throw away the high bits and add apparently duplicate regions.
This results in a BUG() in free_bootmem_core().  This fixes it by
using an unsigned long instead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:00 +10:00
Kevin Corry
17aa3a82aa [POWERPC] Fix num_cpus calculation in smp_call_function_map()
In smp_call_function_map(), num_cpus is set to the number of online
CPUs minus one.  However, if the CPU mask does not include all CPUs
(except the one we're running on), the routine will hang in the first
while() loop until the 8 second timeout occurs.

The num_cpus should be set to the number of CPUs specified in the mask
passed into the routine, after we've made any modifications to the
mask.  With this change, we can also get rid of the call to
cpus_empty() and avoid adding another pass through the bitmask.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:00 +10:00