Commit Graph

348 Commits

Author SHA1 Message Date
Sascha Hauer
5b80234435 [ARM] 3490/1: i.MX: move uart resources to board files
Patch from Sascha Hauer

This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04 14:07:42 +01:00
Vitaly Bordug
09b03b6c29 [PATCH] ppc32 CPM_UART: Fixed odd address translations
Current address translation methods can produce wrong results, because
virt_to_bus and vice versa may not produce correct offsets on dma-allocated
memory. The right way is, while tracking both phys and virt address of the
window that has been allocated for boffer descriptors, and use those
numbers to compute the offset and make translation properly.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:11:33 +10:00
Vitaly Bordug
e27987cddd [PATCH] ppc32 CPM_UART: Convert to use platform devices
This is intended to make the driver code more generic and flexible,
to get rid of board-specific layouts within driver, and generic rehaul,
yet keeping compatibility with the existing stuff utilizing it, being
compatible with legacy behavior (but with complaints that legacy mode
used).

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 21:11:28 +10:00
Hirokazu Takata
dd1c1e3e9e [PATCH] m32r: Remove a warning in m32r_sio.c
/project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c: In function 'm32r_sio_console_write':
  /project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c:1060: warning: unused variable 'i'

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:51 -07:00
Linus Torvalds
63589ed078 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits)
  Documentation: fix minor kernel-doc warnings
  BUG_ON() Conversion in drivers/net/
  BUG_ON() Conversion in drivers/s390/net/lcs.c
  BUG_ON() Conversion in mm/slab.c
  BUG_ON() Conversion in mm/highmem.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/ptrace.c
  BUG_ON() Conversion in ipc/shm.c
  BUG_ON() Conversion in fs/freevxfs/
  BUG_ON() Conversion in fs/udf/
  BUG_ON() Conversion in fs/sysv/
  BUG_ON() Conversion in fs/inode.c
  BUG_ON() Conversion in fs/fcntl.c
  BUG_ON() Conversion in fs/dquot.c
  BUG_ON() Conversion in md/raid10.c
  BUG_ON() Conversion in md/raid6main.c
  BUG_ON() Conversion in md/raid5.c
  Fix minor documentation typo
  BFP->BPF in Documentation/networking/tuntap.txt
  ...
2006-04-02 12:58:45 -07:00
Linus Torvalds
86dca4f8e6 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits)
  [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error)
  [PATCH] pcmcia: fix pcmcia_device_remove oops
  [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
  [PATCH] pcmcia: pseudo device handling update
  [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
  [PATCH] pcmcia: use bitfield instead of p_state and state
  [PATCH] pcmcia: remove unused p_dev->state flags
  [PATCH] pcmcia: make pcmcia_release_{io,irq} static
  [PATCH] pcmcia: add return value to _config() functions
  [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
  [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
  [PATCH] pcmcia: rename pcmcia_device.state
  [PATCH] pcmcia: remove unneeded Vcc pseudo setting
  [PATCH] pcmcia: remove export of pcmcia_release_configuration
  [PATCH] pcmcia: default suspend and resume handling
  [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
  [PATCH] pcmcia: add pcmcia_disable_device
  [PATCH] serial_cs: add Merlin U630 IDs
  [PATCH] pcmcia: AT91RM9200 Compact Flash driver
  [PATCH] pcmcia: socket.functions starts with 1
  ...
2006-04-02 12:49:59 -07:00
Adrian Bunk
733f896927 Merge with git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2006-04-02 10:37:38 +02:00
Linus Torvalds
683aa4012f Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabled
2006-03-31 21:36:51 -08:00
Adrian Bunk
2a08b4e904 fix the email address of Wendy Xiong
Replace a bouncing version of the email address of Wendy Xiong with a
working one.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:04:20 +02:00
Jesper Juhl
a58e00e7da [PATCH] Decrease number of pointer derefs in jsm_tty.c
Decrease the number of pointer derefs in drivers/serial/jsm/jsm_tty.c

Benefits of the patch:
 - Fewer pointer dereferences should make the code slightly faster.
 - Size of generated code is smaller
 - Improved readability

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: "V. ANANDA KRISHNAN" <mansarov@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:01 -08:00
Petr Vandrovec
30bac7aa0e [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
This ugly hack add support for Siemens MC45 PCMCIA GPRS card (which is
identical to Possio GCC, and which is offered by one of our local GPRS
providers).  Card has unfortunate feature that after poweron oxcf950 chip
is fully powered and works, but attached MC45 modem is powered down :-(
There is a special sequence (which takes 1 sec :-( ) to poweron MC45 (and
after MC45 powers on, it takes more than 2 secs until firmware fully
boots...) which needs to be executed after all powerons.

I'm really not familiar with PCMCIA subsystem, so I have no idea whether I
should issue request_region() on rest of oxcf950 address range (0-7 is
UART, 8-F are special configuration registers), or how this should be
better integrated with PM system and so on - I just put it in same place
where another hack already lived...

Card uses 18.432MHz XTAL, so to get it to work you must add lines below to
the /etc/pcmcia/serial.opts.

case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
'030c,0003-2-GPRS-CARD--')
    SERIAL_OPTS="baud_base 1152000"
    ;;
esac

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:27:07 +02:00
Dominik Brodowski
9940ec3617 [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present().

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:57 +02:00
Dominik Brodowski
e2d4096365 [PATCH] pcmcia: use bitfield instead of p_state and state
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:33 +02:00
Dominik Brodowski
15b99ac172 [PATCH] pcmcia: add return value to _config() functions
Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
Dominik Brodowski
fba395eee7 [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
Dominik Brodowski
fd238232cd [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:57 +02:00
Dominik Brodowski
70294b4683 [PATCH] pcmcia: remove unneeded Vcc pseudo setting
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:55 +02:00
Dominik Brodowski
8661bb5b4a [PATCH] pcmcia: default suspend and resume handling
In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:52 +02:00
Dominik Brodowski
5f2a71fcb7 [PATCH] pcmcia: add pcmcia_disable_device
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary
cleanups upon device or driver removal: it calls the appropriate
pcmcia_release_* functions, and can replace (most) of the current drivers'
_release() functions.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:50 +02:00
Domen Puncer
1de9cedfbd [PATCH] serial_cs: add Merlin U630 IDs
Add Merlin U630 IDs.

Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:13:15 +02:00
Helge Deller
5076c15862 [PARISC] I/O-Space must be ioremap_nocache()'d
Addresses in F-space must be accessed uncached on most parisc machines.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30 17:48:42 +00:00
Russell King
0cff260a42 [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabled
Allow the 8250 probe modules to be disabled if we're building for
with EMBEDDED enabled.  This reduces the kernel size by not including
unnecessary probe module support.

Original idea from Matt Mackall for PCI only, expanded to others by
rmk.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-29 22:03:38 +01:00
Linus Torvalds
d4965b3e2f Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support.
  [SERIAL] amba-pl010: allow platforms to specify modem control method
  [SERIAL] Remove obsoleted au1x00_uart driver
  [SERIAL] Small time UART configuration fix for AU1100 processor
2006-03-28 13:52:37 -08:00
Alexey Dobriyan
7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Russell King
fbb18a277a [SERIAL] amba-pl010: allow platforms to specify modem control method
The amba-pl010 hardware does not provide RTS and DTR control lines; it
is expected that these will be implemented using GPIO.  Allow platforms
to supply a function to implement manipulation of modem control lines.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-26 23:13:39 +01:00
Ralf Baechle
335bd9dff3 [SERIAL] Remove obsoleted au1x00_uart driver
As announced in feature-removal-schedule.txt.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-26 21:25:57 +01:00
Freddy Spierenburg
8faaea3faa [SERIAL] Small time UART configuration fix for AU1100 processor
The AU1100 processor does not have an internal UART2. Only
UART0, UART1 and UART3 exist. This patch removes the non existing
UART2 and replaces it with a descriptive comment.

Signed-off-by: Freddy Spierenburg <freddy@dusktilldawn.nl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-26 21:22:51 +01:00
Linus Torvalds
36ddf5bbde Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial:
  [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion
  [SERIAL] amba-pl010: Remove accessor macros
  [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)
  [SERIAL] icom: select FW_LOADER
2006-03-25 20:31:32 -08:00
Russell King
98639a67a9 [SERIAL] amba-pl010: Remove accessor macros
Remove unnecessary accessor macros, using readb/writel directly
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25 21:30:11 +00:00
Bjorn Helgaas
111c9bf8c5 [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)
With the combination of PNPACPI and 8250_pnp, we no longer need 8250_acpi.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25 17:49:47 +00:00
maximilian attems
cb2fc532d0 [SERIAL] icom: select FW_LOADER
The icom driver uses request_firmware()
and thus needs to select FW_LOADER.

Signed-off-by: maximilian attems <maks@sternwelten.at>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25 17:44:20 +00:00
Linus Torvalds
1e8c573933 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits)
  BUG_ON() Conversion in drivers/video/
  BUG_ON() Conversion in drivers/parisc/
  BUG_ON() Conversion in drivers/block/
  BUG_ON() Conversion in sound/sparc/cs4231.c
  BUG_ON() Conversion in drivers/s390/block/dasd.c
  BUG_ON() Conversion in lib/swiotlb.c
  BUG_ON() Conversion in kernel/cpu.c
  BUG_ON() Conversion in ipc/msg.c
  BUG_ON() Conversion in block/elevator.c
  BUG_ON() Conversion in fs/coda/
  BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
  BUG_ON() Conversion in input/serio/hil_mlc.c
  BUG_ON() Conversion in md/dm-hw-handler.c
  BUG_ON() Conversion in md/bitmap.c
  The comment describing how MS_ASYNC works in msync.c is confusing
  rcu: undeclared variable used in documentation
  fix typos "wich" -> "which"
  typo patch for fs/ufs/super.c
  Fix simple typos
  tabify drivers/char/Makefile
  ...
2006-03-25 08:41:09 -08:00
Mark A. Greer
e4294b3ecd [PATCH] serial: merge mpsc.h into mpsc.c
Merge mpsc.h into mpsc.c because its the only file that #include's mpsc.h.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:02 -08:00
Mark A. Greer
6261c8e34f [PATCH] serial: mpsc driver has definition of SUPPORT_SYSRQ below include of serial_core.h
The definition of SUPPORT_SYSRQ must come before #include of serial_core.h.
This patch moves the definition of SUPPORT_SYSRQ to be just after the #include
of config.h to make it consistent with 8250.c.

Reported-by: Stephane Chazelas <Stephane@artesyncp.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:02 -08:00
Mark A. Greer
a30ff2e348 [PATCH] serial: mpsc driver passes bad devname to request_irq()
The devname passed to request_irq() contained a '/' which is wrong.  At
a minimum, the '/' prevented the devname from showing up in
/proc/irq/<irq>/<devname>.  This patch replaces the '/' with a '-' to
fixes that problem.

Reported-by: Stephane Chazelas <Stephane@artesyncp.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:02 -08:00
Pat Gefre
64b9137943 [PATCH] Altix: rs422 support for ioc4 serial driver
Add rs422 support to the Altix ioc4 serial driver.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:59 -08:00
Bjorn Helgaas
e51c01b084 [PATCH] hp300: fix driver_register() return handling, remove dio_module_init()
Remove the assumption that driver_register() returns the number of devices
bound to the driver.  In fact, it returns zero for success or a negative
error value.

dio_module_init() used the device count to automatically unregister and
unload drivers that found no devices.  That might have worked at one time,
but has been broken for some time because dio_register_driver() returned
either a negative error or a positive count (never zero).  So it could only
unregister on failure, when it's not needed anyway.

This functionality could be resurrected in individual drivers by counting
devices in their .probe() methods.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Philip Blundell <philb@gnu.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:53 -08:00
Uwe Zeisberger
c30fe7f731 fix typos "wich" -> "which"
Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:23:14 +01:00
Adrian Bunk
41c28ff163 [PATCH] kill _INLINE_
This patch removes all occurances of _INLINE_ in the kernel.

With the exception of tty_flip.h, I've simply removed the inline's since
gcc should know best which functions to be inlined.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:16 -08:00
Linus Torvalds
9d8f057acb Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Merge avlab serial board entries in parport_serial
  [SERIAL] kernel console should send CRLF not LFCR
2006-03-22 17:33:12 -08:00
Dmitry Torokhov
d39b6cfe66 [PATCH] vr41xx: convert to the new platform device interface
The patch does the following for v441xx seris drivers:

 - stop using platform_device_register_simple() as it is going away
 - mark ->probe() and ->remove() methods as __devinit and __devexit
   respectively
 - initialize "owner" field in driver structure so there is a link
   from /sys/modules to the driver
 - mark *_init() and *_exit() functions as __init and __exit

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:53:56 -08:00
Atsushi Nemoto
83485f826b [PATCH] serial: serial_txx9 driver update
Update the serial_txx9 driver.

 * More strict check in verify_port.  Cleanup.
 * Do not insert a char caused previous overrun.
 * Fix some spin_locks.
 * Do not call uart_add_one_port for absent ports.

Also, this patch removes a BROKEN tag from Kconfig.  This driver has been
marked as BROKEN by removal of uart_register_port, but it has been solved
already on Sep 2005.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:53:55 -08:00
David Vrabel
489447380a [PATCH] handle errors returned by platform_get_irq*()
platform_get_irq*() now returns on -ENXIO when the resource cannot be
found.  Ensure all users of platform_get_irq*() handle this error
appropriately.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 13:42:57 -08:00
Russell King
d358788f3f [SERIAL] kernel console should send CRLF not LFCR
Glen Turner reported that writing LFCR rather than the more
traditional CRLF causes issues with some terminals.

Since this aflicts many serial drivers, extract the common code
to a library function (uart_console_write) and arrange for each
driver to supply a "putchar" function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 20:00:09 +00:00
David S. Miller
a858f1ca72 [SUNSU]: Fix missing spinlock initialization.
Caught by CONFIG_DEBUG_SPINLOCK.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:16:32 -08:00
David S. Miller
f5deb807b8 [SPARC] serial: Make sure sysfs nodes get named correctly.
Because we play this trick where we use ttyS? in increasing minor
numbers for different sunfoo.c drivers, we have to inform the TTY
layer of this.

Do so by setting the tty->name_base appropriately.

Probably there should be a generic way to do this in the serial core,
but for now...

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:47 -08:00
David S. Miller
843dfb4d99 [SPARC64] sunhv: Fix locking in sunhv_start_tx()
Caller takes the lock already.

Also, fixup the poll loop in sunhv_break_ctl().  Just
like in console write, we udelay(2) and use a loop
limit of 1000000 iterations.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:38 -08:00
David S. Miller
11fc04e46a [SPARC64]: Put sunhv.o earliest in the list of sparc serial drivers.
So that it will show up as /dev/ttyS0.  Otherwise things like
installers will try to run on whatever serial port gets probed
first.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:37 -08:00
David S. Miller
135066a211 [SPARC64] sunhv: Support SYSRQ properly.
By calling uart_handle_break().  We'll still do the
"sun_do_break()" handling if the user gives two
breaks in a row.

We should probably do this in the other Sparc serial
drivers too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:11 -08:00
David S. Miller
db33f9bc09 [SPARC64]: Fix OOPS on sunhv interrupts.
Until the uart is openned, port->info is NULL.

Also, init the port->irq properly and give a non-zero
port->membase so that the uart device reporting is done.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:10 -08:00