Commit Graph

927 Commits

Author SHA1 Message Date
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Richard Röjfors
dd14be4c27 i2c-ocores: Can add I2C devices to the bus
There is sometimes a need for the ocores driver to add devices to the
bus when installed.

i2c_register_board_info can not always be used, because the I2C devices
 are not known at an early state, they could for instance be connected
 on a I2C bus on a PCI device which has the Open Cores IP.

i2c_new_device can not be used in all cases either since the resulting
bus nummer might be unknown.

The solution is the pass a list of I2C devices in the platform data to
the Open Cores driver. This is useful for MFD drivers.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:28 +01:00
Ben Dooks
7d85ccd816 i2c-s3c2410: move to using platform idtable to match devices
Change to using platform id table to match either of the two supported
platform device names in the driver. This simplifies the driver init and
exit code

Note, log messages will now be prefixed with 's3c-i2c' instead of the
driver name, so output will be of the form of:

s3c-i2c s3c2440-i2c.0: slave address 0x10

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:26 +01:00
Aaro Koskinen
84bf2c868f i2c: OMAP3: Better noise suppression for fast/standard modes
Use longer noise filter period for fast and standard mode. Based on an
earlier patch by Eero Nurkkala.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:26 +01:00
Aaro Koskinen
baf46b4e37 i2c: OMAP2/3: Fix scll/sclh calculations
Fix scll/sclh calculations for HS and fast modes. Currently the driver
uses equal (roughly) low/high times which will result in too short
low time.

OMAP3430 TRM gives the following equations:

	F/S: tLow  = (scll + 7) * internal_clk
	     tHigh = (sclh + 5) * internal_clk
	HS:  tLow  = (scll + 7) * fclk
	     tHigh = (sclh + 5) * fclk

Furthermore, the I2C specification sets the following minimum values
for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400)
and 400 pF (maximum speed 1700):

	speed	tLow		tHigh
	3400	160 ns		60 ns
	1700	320 ns		120 ns

and for F/S:

	speed	tLow		tHigh
	400	1300 ns		600 ns
	100	4700 ns		4000 ns

By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these
minimum values.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Michael Hennerich
e0cd2dd5dd i2c: Blackfin TWI: implement I2C_FUNC_SMBUS_I2C_BLOCK functionality
Some drivers need i2c_smbus_read_i2c_block_data() functionality, so add
support for it to the Blackfin I2C bus driver.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[ben-linux@fluff.org: shortened subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Frank Shew
94327d009e i2c: Blackfin TWI: fix transfer errors with repeat start
We have a custom BF537 board with an I2C RTC (MAX DS3231) running
uclinux 2007R1 for some time. Recently during migration to 2008R1.5-RC3
we losted access to the RTC. The RTC driver calls 'i2c_transfer()' which
in turns calls 'bfin_twi_master_xfer()' in i2c-bfin-twi.c.

Compared with 2007R1, it looks like the 2008R1.5 version of i2c-bin-twi.c
has a new mode 'TWI_I2C-MODE_REPEAT' which corresponds to the Repeat Start
Condition described in the HRM. However, according to the HRM, at XMIT or
RECV interrupt and when the data count is 0, not only is the RESTART bit
supposed to be set, but MDIR must also be set if the next operation is a
receive sequence, and cleared if not. Currently there is no code that looks
at the I2C_M_RD bit in the flag from the next cur_msg and set/clear the MDIR
flag accordingly at the same time that the RSTART bit is set. Instead, MDIR
is set or cleared (by OR'ing with 0?) after the RESTART bit has been cleared
during handling of MCOMP interrupt.

It appears that this is causing our failure with reading the RTC, as a
quick patch to set/clear MDIR when RESTART is set seem to solve our problem.

Signed-off-by: Frank Shew <fshew@geometrics.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Sonic Zhang
57a8f32eaf i2c: Blackfin TWI: fix REPEAT START mode doesn't repeat
Avoid rewrite TWI MASTER_CTL reg when issue next message
In i2c repeat transfer mode, byte count of next message should be filled
into part of the TWI MASTER_CTL reg when interrupt MCOMP of last
message transfer is triggered. But, other bits in this reg should
not be touched.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Michael Hennerich
9528d1c7a5 i2c: Blackfin TWI: make sure we don't end up with a CLKDIV=0
Make sure we don't end up with an invalid CLKDIV=0 in case someone
specifies 20kHz SCL or less (5 * 1024 / 20 = 0x100).

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shortened subject line]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Eric Miao
f0a8370139 [ARM] pxa: move mach/i2c.h to plat/i2c.h
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:01 +08:00
Eric Miao
f23d491131 [ARM] pxa: add platform device ID table to pxa i2c driver
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:21:42 +08:00
Paul Mundt
464c9e1037 Merge branch 'sh/clkfwk' 2009-05-26 23:50:40 +09:00
Paul Mundt
af777ce42d sh: clkfwk: module_clk -> peripheral_clk rename.
For consistenct naming, and to allow us to fix up some confusion in the
SH-Mobile clock framework, amongst other places.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 16:59:40 +09:00
Linus Torvalds
816dc3c82b Merge branch 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
  i2c: Enable i2c-s3c2410 for S3C64XX too
  i2c-mpc: bug fix for MPC52xx clock setting and printout
  i2c-pxa.c: timeouts off by 1
2009-05-12 11:21:51 -07:00
Mark Ware
36521c271e i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:04 +01:00
Mark Brown
89bc5d4a91 i2c: Enable i2c-s3c2410 for S3C64XX too
This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:03 +01:00
Wolfgang Grandegger
1904b03430 i2c-mpc: bug fix for MPC52xx clock setting and printout
The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:35:56 +01:00
Enrik Berkhan
2196d1cf4a i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30)
Currently, the i2c-algo-pca driver does nothing if the chip enters state
0x30 (Data byte in I2CDAT has been transmitted; NOT ACK has been
received).  Thus, the i2c bus connected to the controller gets stuck
afterwards.

I have seen this kind of error on a custom board in certain load
situations most probably caused by interference or noise.

A possible reaction is to let the controller generate a STOP condition.
This is documented in the PCA9564 data sheet (2006-09-01) and the same
is done for other NACK states as well.

Further, state 0x38 isn't handled completely, either. Try to do another
START in this case like the data sheet says. As this couldn't be tested,
I've added a comment to try to reset the chip if the START doesn't help
as suggested by Wolfram Sang.

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-05 08:39:25 +02:00
Dave Airlie
0cdba07bb2 i2c-algo-bit: Fix timeout test
When fetching DDC using i2c algo bit, we were often seeing timeouts
before getting valid EDID on a retry. The VESA spec states 2ms is the
DDC timeout, so when this translates into 1 jiffie and we are close
to the end of the time period, it could return with a timeout less than
2ms.

Change this code to use time_after instead of time_after_eq.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-05 08:39:24 +02:00
Roel Kluin
4ccc28f725 i2c: Timeouts off by 1
with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-05 08:39:24 +02:00
Roel Kluin
d10db3a07e i2c-pxa.c: timeouts off by 1
With `while (timeout--)' timeout reaches -1 after the loop, so the tests
below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-03 22:54:23 +01:00
Jean Delvare
935298696f i2c: Let new-style drivers implement attach_adapter
While it isn't the way the standard device binding model works, it is
OK for new-style drivers to implement attach_adapter. It may help
convert the renaming legacy drivers to new style drivers faster.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-04-13 17:02:14 +02:00
Jean Delvare
3f307fb37a i2c-voodoo3: Deprecate in favor of tdfxfb
Support for I2C/DDC was recently added to the tdfxfb driver, which
means that the i2c-voodoo3 driver can be deprecated.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
2009-04-13 17:02:13 +02:00
Jean Delvare
c454dee21d i2c-algo-pca: Fix use of uninitialized variable in debug message
A recent change broke debugging of pca_xfer(), fix it.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2009-04-13 17:02:13 +02:00
Wolfram Sang
65de394df2 i2c: imx: Make disable_delay a per-device variable
'disable_delay' was static which is wrong as it is calculated using the per-device
bus speed. This patch turns 'disable_delay' into a per-device variable.

Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:23:34 +01:00
Oskar Schirmer
b486ddbc0f i2c: xtensa s6000 i2c driver
Support for the s6000 on-chip i2c controller.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:23:34 +01:00
Wolfgang Grandegger
f2bd5efe72 i2c: i2c-mpc: make I2C bus speed configurable
This patch makes the I2C bus speed configurable by using the I2C node
property "clock-frequency". If the property is not defined, the old
fixed clock settings will be used for backward comptibility.

The generic I2C clock properties, especially the CPU-specific source
clock pre-scaler are defined via the OF match table:

  static const struct of_device_id mpc_i2c_of_match[] = {
	...
	{.compatible = "fsl,mpc8543-i2c",
	 .data = &(struct fsl_i2c_match_data) {
			.setclock = mpc_i2c_setclock_8xxx,
			.prescaler = 2,
		},
	},

The "data" field defines the relevant I2C setclock function and the
relevant pre-scaler for the I2C source clock frequency.

It uses arch-specific tables and functions to determine resonable
Freqency Divider Register (fdr) values for MPC83xx, MPC85xx, MPC86xx,
MPC5200 and MPC5200B.

The i2c->flags field and the corresponding FSL_I2C_DEV_* definitions
have been removed as they are obsolete.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:47 +01:00
Wolfgang Grandegger
54377cd059 i2c: i2c-mpc: use dev based printout function
This patch used the dev_dbg, dev_err, etc. functions for debug
and error output instead of printk and pr_debug.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:47 +01:00
Wolfgang Grandegger
8101a30095 i2c: i2c-mpc: various coding style fixes
Fix errors reported by checkpatch (indention, long lines, trailing
white space, etc.).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:47 +01:00
Darius Augulis
309c18d2cd i2c: imx: Add missing request_mem_region in probe()
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[ben-linux@fluff.org: fix minor patch fault in remove]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Mark Brown
18dc83a6ea i2c: i2c-s3c2410: Initialise Samsung I2C controller early
This is required in order to ensure that core system devices such as
voltage regulators attached via I2C are avaiable early in boot.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Daniel Silverstone
c564e6ae6c i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.

This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Ben Dooks
a192f7153b i2c-s3c2410: sda_delay should be in ns, not clock ticks
The sda_delay field should be specified in ns, not in clock ticks
as when using cpufreq we could be changing the bus rate.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
2009-04-07 10:18:33 +01:00
Darius Augulis
aa11e38ce6 i2c: iMX/MXC support
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated
in Freescale's i.MX/MXC processors.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:32 +01:00
Jean Delvare
abe213d7f6 i2c: Delete unused i2c-algo-sgi helper module
The i2c-algo-sgi code was merged into the vino driver, so we can
delete it now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-04-06 18:12:25 +02:00
Linus Torvalds
3c6fae67d0 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (fschmd) Add support for the FSC Hades IC
  hwmon: (fschmd) Add support for the FSC Syleus IC
  i2c-i801: Instantiate FSC hardware montioring chips
  dmi: Let dmi_walk() users pass private data
  hwmon: Define a standard interface for chassis intrusion detection
  Move the pcf8591 driver to hwmon
  hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG
  hwmon: (w83627ehf) Add support for W83667HG
  hwmon: (w83627ehf) Invert fan pin variables logic
  hwmon: (hdaps) Fix Thinkpad X41 axis inversion
  hwmon: (hdaps) Allow inversion of separate axis
  hwmon: (ds1621) Clean up documentation
  hwmon: (ds1621) Avoid unneeded register access
  hwmon: (ds1621) Clean up register access
  hwmon: (ds1621) Reorder code statements
2009-03-30 17:54:32 -07:00
Hans de Goede
fa5bfab712 i2c-i801: Instantiate FSC hardware montioring chips
Detect various FSC hwmon IC's based on DMI tables and then let
the i2c-i801 driver instantiate the i2c client devices. Note that
some of the info in the added table is indentical for all rows, still
this is kept in the table to keep the code general and thus (hopefully)
easily extensible in the future.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30 21:46:44 +02:00
Jean Delvare
fb4504fe84 Move the pcf8591 driver to hwmon
Directory drivers/i2c/chips is going away, so drivers there must find
new homes. For the pcf8591 driver, the best choice seems to be the
hwmon subsystem. While the Philips PCF8591 device isn't a typical
hardware monitoring chip, its DAC interface is compatible with the
hwmon one, so it fits somewhat.

If a better subsystem is ever created for ADC/DAC chips, the driver
could be moved there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2009-03-30 21:46:43 +02:00
Benjamin Herrenschmidt
9ff9a26b78 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/elf.h
	drivers/i2c/busses/i2c-mpc.c
2009-03-30 14:04:53 +11:00
Linus Torvalds
07d43ba986 Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-core: Some style cleanups
  i2c-piix4: Add support for the Broadcom HT1100 chipset
  i2c-piix4: Add support to SB800 SMBus changes
  i2c-pca-platform: Use defaults if no platform_data given
  i2c-algo-pca: Use timeout for checking the state machine
  i2c-algo-pca: Rework waiting for a free bus
  i2c-algo-pca: Add PCA9665 support
  i2c: Adapt debug macros for KERN_* constants
  i2c-davinci: Fix timeout handling
  i2c: Adapter timeout is in jiffies
  i2c: Set a default timeout value for all adapters
  i2c: Add missing KERN_* constants to printks
  i2c-algo-pcf: Handle timeout correctly
  i2c-algo-pcf: Style cleanups
  eeprom/at24: Remove EXPERIMENTAL
  i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79
  i2c: Clarify which clients are auto-removed
  i2c: Let checkpatch shout on users of the legacy model
  i2c: Document the different ways to instantiate i2c devices
2009-03-28 14:04:53 -07:00
Zhenwen Xu
09b8ce0a69 i2c-core: Some style cleanups
Some lines over 80. 
The printk(KERN_ERR ... ) should be dev_err.
And some blankspace should be deleted.

Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Jean Delvare <khlai@linux-fr.org>
2009-03-28 21:34:46 +01:00
Flavio Leitner
506a8b6c27 i2c-piix4: Add support for the Broadcom HT1100 chipset
Add support for the Broadcom HT1100 LD chipset (SMBus function.)

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:46 +01:00
Shane Huang
87e1960e93 i2c-piix4: Add support to SB800 SMBus changes
Add support for the AMD SB800 Family series of products.
Major changes include the changes to addressing the SMBus registers at different
location from the locations in the previous compatible parts from AMD such as
SB400/SB600/SB700. For SB800, the main features and register definitions of
SMBus and other interfaces are still compatible with the previous products with
the only change being in how to access the internal registers for these blocks.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:46 +01:00
Wolfram Sang
6b110d13aa i2c-pca-platform: Use defaults if no platform_data given
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:45 +01:00
Wolfram Sang
2378bc09b9 i2c-algo-pca: Use timeout for checking the state machine
We now timeout also if the state machine does not change within the
given time. For that, the driver-specific completion-functions are
extended to return true or false depending on the timeout. This then
gets checked in the algorithm.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:45 +01:00
Wolfram Sang
8e99ada8de i2c-algo-pca: Rework waiting for a free bus
Waiting for a free bus now accepts the timeout value in jiffies and does
proper checking using time_before.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:45 +01:00
Marco Aurelio da Costa
eff9ec95ef i2c-algo-pca: Add PCA9665 support
Add support for the PCA9665 I2C controller.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28 21:34:44 +01:00
Frank Seidel
bac3e7c2aa i2c: Adapt debug macros for KERN_* constants
According to kerneljanitors todo list all printk calls (beginning
a new line) should have an according KERN_* constant.
Those are the changes to the debug macros in the i2c subsystem
to meet this requirement. Also changing no-debug statements
to raw printks again.

Signed-off-by: Frank Seidel <frank@f-seidel.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-03-28 21:34:44 +01:00
Jean Delvare
98a679cad5 i2c-davinci: Fix timeout handling
Properly set the adapter timeout value in jiffies, and then use that
value in the driver, rather than a hard-coded constant.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Kevin Hilman <khilman@mvista.com>
2009-03-28 21:34:43 +01:00
Jean Delvare
8a52c6b4d5 i2c: Adapter timeout is in jiffies
i2c_adapter.timeout is in jiffies. Fix all drivers which thought
otherwise. It didn't really matter as long as the value was only used
inside the driver, but soon i2c-core will use it too so it must have
the proper unit.

Note: for the i2c-mpc driver, this fixes a bug in polling mode.
Timeout would trigger after 1 jiffy, which is most probably not what
the author wanted.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Clifford Wolf <clifford@clifford.at>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Mark A. Greer <mgreer@mvista.com>
2009-03-28 21:34:43 +01:00