Commit Graph

25 Commits

Author SHA1 Message Date
Tony Lindgren
ee0839c22c ARM: OMAP2+: Move most of plat/io.h into local iomap.h
There's no need to have these defines in plat/io.h.

Note that we now need to ifdef omap_read/write calls
as they will be available for omap1 only.

While at it, clean up the includes to group them like
they typically are grouped.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24 10:34:35 -08:00
Linus Torvalds
0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00
Dave Martin
ef7a87d340 ARM: omap3: Thumb-2 compatibility for sram34xx.S
* Build unconditionally as ARM for correct interoperation with
   OMAP firmware.

 * Remove deprecated PC-relative stores

 * Add the required ENDPROC() directive for each ENTRY().

 * .align before data words

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-09 16:38:36 -08:00
Jean Pihet
b6338bdc83 ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM
The new fncpy API is better suited* for copying some
code to SRAM at runtime. This patch changes the ad-hoc
code to the more generic fncpy API.

*: 1. fncpy ensures that the thumb mode bit is propagated,
   2. fncpy provides the security of type safety between the
     original function and the sram function pointer.

Tested OK on OMAP3 in low power modes (RET/OFF)
using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL.
Compile tested on OMAP1/2 using omap1_defconfig.

Boot tested on OMAP1 & OMAP2
Tested OK with suspend/resume on OMAP2420/n810

Boots fine on osk5912 and n800

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-04 14:26:08 +00:00
Paul Walmsley
1124d2f918 OMAP2/3: SRAM: add comment about crashes during a TLB miss
Some users were observing crashes during the execution of CORE DVFS
code from OCM RAM -- a locally-modified copy of the linux-omap code.
Richard Woodruff tracked this down to a DTLB miss which had been
inadvertently and intermittently caused by the local modifications.
(The TLB miss caused the ARM MMU to attempt to walk the page tables
stored in SDRAM, which was not possible since SDRAM is off-line for a
portion of the CORE DVFS OCM RAM code.)

Add a note to the OMAP2 & OMAP3 CORE DVFS SRAM code to warn others that
changes may result in crashes here if they are not carefully tested.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Nishanth Menon <nm@ti.com>
2010-12-21 21:08:14 -07:00
Paul Walmsley
59fb659b06 OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
In preparation for adding OMAP4-specific PRCM accessor/mutator
functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific
files.  Most of what was in mach-omap2/{cm,prm}.{c,h} has now been
moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was
OMAP2xxx/3xxx-specific.

This process also requires the #includes in each of these files to be
changed to reference the new file name.  As part of doing so, add some
comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use
"sideways includes", to indicate that these users of the PRM/CM includes
should not be doing so.

Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this
patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21 20:01:55 -07:00
Jon Hunter
a3fed9bc18 omap3: Prevent SDRC deadlock when L3 is changing frequency
When changing the L3 clock frequency, the CPU is executing from internal RAM
and the SDRC clock is disabled. During this time accesses made to external
DDR are stalled. If the ARM subsystem attempts to access the DDR while the
SDRC clock is disabled this will stall the CPU until the access to the SDRC
timeouts. A timeout on the SDRC should never occur. Once a timeout occurs all
the following accesses will be aborted and the DDR is no longer accessible.

Although the code being executed in the internal RAM does not directly access
the DDR, it was found that the branch prediction logic in the CPU may cause
the CPU to prefetch code from a DDR location while the SDRC clock is disabled.
This was causing an SDRC timeout which resulted in a system hang.

This patch fixes this problem by ensuring the branch prediction logic is
disabled while changing the L3 clock frequency. The branch prediction logic
is disabled by clearing the Z-bit in the ARM CTRL register.

Disabling the branch prediction logic does not have any noticable impact
on the execution time of this code section. The hardware observability
signals were used to monitor the sdrc idle time with and without this
patch when operating at different CPU frequencies (150MHz, 500MHz and
600MHz) and the total sdrc idle time when changing frequenct was in
the range of 9-11us. This was measured on an omap3430 SDP running the
omapzoom p-android-omap-2.6.29 branch.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-09-27 14:02:59 -06:00
Paul Walmsley
18862cbe47 OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
The code that reprograms the SDRC memory controller during CORE DVFS,
mach-omap2/sram34xx.S:omap3_sram_configure_core_dpll(), does not
ensure that all L3 initiators are prevented from accessing the SDRAM
before modifying the SDRC AC timing and MR registers.  This can cause
memory to be corrupted or cause the SDRC to enter an unpredictable
state.  This patch places that code behind a Kconfig option,
CONFIG_OMAP3_SDRC_AC_TIMING for now, and adds a note explaining what
is going on.  Ideally the code can be added back in once supporting
code is present to ensure that other initiators aren't touching the
SDRAM.  At the very least, these registers should be reprogrammable
during kernel init to deal with buggy bootloaders.  Users who know
that all other system initiators will not be touching the SDRAM can
also re-enable this Kconfig option.

This is a modification of a patch originally written by Rajendra Nayak
<rnayak@ti.com> (the original is at http://patchwork.kernel.org/patch/51927/).
Rather than removing the code completely, this patch just comments it out.

Thanks to Benoît Cousson <b-cousson@ti.com> and Christophe Sucur
<c-sucur@ti.com> for explaining the technical basis for this and for
explaining what can be done to make this path work in future code.
Thanks to Richard Woodruff <r-woodruff2@ti.com>, Nishanth Menon
<nm@ti.com>, and Olof Johansson <olof@lixom.net> for their comments.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Christophe Sucur <c-sucur@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Olof Johansson <olof@lixom.net>
2009-12-11 17:00:42 -07:00
Rajendra Nayak
df56556e57 OMAP3 SDRC: Move the clk stabilization delay to the right place
The clock stabilization delay post a M2 divider change is needed
even before a SDRC interface clock re-enable and not only before
jumping back to SDRAM.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24 20:10:35 -06:00
Rajendra Nayak
8ff120e530 OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83Mhz
This patch fixes a bug in the CORE dpll scaling sequence which was
errouneously clearing some bits in the SDRC DLLA CTRL register and
hence causing a freeze.  The issue was observed only on platforms
which scale CORE dpll to < 83Mhz and hence program the DLL in fixed
delay mode.

Issue reported by Limei Wang <E12499@motorola.com>, with debugging
assistance from Richard Woodruff <r-woodruff2@ti.com> and Girish
Ghongdemath <girishsg@ti.com>.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Limei Wang <E12499@motorola.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Girish Ghongdemath <girishsg@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: updated patch description to include collaboration credits]
2009-07-24 20:10:35 -06:00
Paul Walmsley
75f251e3d0 OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot
Stop setting SDRC_POWER.PWDENA on boot.  There is a nasty erratum
(34xx erratum 1.150) that can cause memory corruption if PWDENA is
enabled.

Based originally on a patch from Samu P. Onkalo <samu.p.onkalo@nokia.com>.

Tested on BeagleBoard rev C2.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Samu P. Onkalo <samu.p.onkalo@nokia.com>
2009-07-24 19:44:01 -06:00
Jean Pihet
58cda884ec OMAP3 SDRC: add support for 2 SDRAM chip selects
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24 19:43:25 -06:00
Paul Walmsley
7b7bcefa35 OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
Correspondence with the TI OMAP hardware team indicates that
SDRC_DLLA_CTRL.FIXEDDELAY should be initialized to 0x0f.  This number
was apparently derived from process validation.  This is only used
when the SDRC DLL is unlocked (e.g., SDRC clock frequency less than
83MHz).

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:32 -06:00
Tero Kristo
3afec6332e OMAP3: Add support for DPLL3 divisor values higher than 2
Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
2009-06-19 19:09:32 -06:00
Paul Walmsley
df14e4747a OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
Convert omap3_sram_configure_core_dpll() to use macros rather than
magic numbers.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:32 -06:00
Paul Walmsley
4267b5d152 OMAP3 SRAM: add more comments on the SRAM code
Clean up comments and copyrights on the CORE DPLL3 M2 divider change code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
d0ba3922ae OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
Program the SDRC_MR_0 register as well during SDRC clock changes.
This register allows selection of the memory CAS latency.  Some SDRAM
chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency
at lower clock rates.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
c9812d042a OMAP3 clock: add a short delay when lowering CORE clk rate
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2
divider, add a short delay before returning to SDRAM to allow the SDRC
time to stabilize.  Without this delay, the system is prone to random
panics upon re-entering SDRAM.

This time delay varies based on MPU frequency.  At 500MHz MPU frequency at
room temperature, 64 loops seems to work okay; so add another 32 loops for
environmental and process variation.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
6adb8f388e OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
The original CDP kernel that this code comes from waited for 0x800
loops after switching the CORE DPLL M2 divider.  This does not appear
to be necessary.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:30 -06:00
Paul Walmsley
4519c2bf43 OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHz
According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the
DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC
clock frequency from 83MHz to 166MHz.  CDP code unconditionally
unlocked the DLL whenever shifting to a lower SDRC speed, but this
seems unnecessary and error-prone, as the DLL is no longer able to
compensate for process, voltage, and temperature variations.  Instead,
only unlock the DLL when the SDRC clock rate would be less than 83MHz.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12 17:27:10 -06:00
Paul Walmsley
b2abb271a5 OMAP3 SRAM: renumber registers to make space for argument passing
Renumber registers in omap3_sram_configure_core_dpll() assembly code to
make space for additional parameters.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12 17:27:10 -06:00
Paul Walmsley
fa0406a8d8 OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change
Clear the SDRC_POWER.PWRENA bit before putting the SDRAM into self-refresh
mode.  This prevents the SDRC from attempting to power off the SDRAM,
which can cause the system to hang.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12 17:27:09 -06:00
Paul Walmsley
d75d9e73cd OMAP3 clock: add interconnect barriers to CORE DPLL M2 change
Where necessary, add interconnect barriers to force posted writes to
complete before continuing.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12 17:27:09 -06:00
Paul Walmsley
69d4255b13 OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpll
Add more barriers in the SRAM CORE DPLL M2 divider change code.

- Add a DSB SY after the function's entry point to flush all cached
  and buffered writes and wait for the interconnect to claim that they
  have completed[1].  The idea here is to force all delayed write
  traffic going to the SDRAM to at least post to the L3 interconnect
  before continuing.  If these writes are allowed to occur after the
  SDRC is idled, the writes will not be acknowledged and the ARM will
  stall.

  Note that in this case, it does not matter if the writes actually
  complete to the SDRAM - it is only necessary for the writes to leave
  the ARM itself.  If the writes are posted by the interconnect when
  the SDRC goes into idle, the writes will be delayed until the SDRC
  returns from idle[2].  If the SDRC is in the middle of a write when
  it is requested to enter idle, the SDRC will not acknowledge the
  idle request until the writes complete to the SDRAM.[3]

  The old-style DMB in sdram_in_selfrefresh is now superfluous, so,
  remove it.

- Add an ISB before the function's exit point to prevent the ARM from
  speculatively executing into SDRAM before the SDRAM is enabled[4].

...

1. ARMv7 ARM (DDI 0406A) A3-47, A3-48.

2. Private communication with Richard Woodruff <r-woodruff2@ti.com>.

3. Private communication with Richard Woodruff <r-woodruff2@ti.com>.

4. ARMv7 ARM (DDI 0406A) A3-48.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-05-12 17:27:09 -06:00
Syed Mohammed, Khasim
cc26b3b01b ARM: OMAP3: Add minimal omap3430 support
Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.

Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09 17:51:41 +03:00