Commit Graph

157 Commits

Author SHA1 Message Date
Randy Dunlap
f5ddcac435 PCI: fix missing kernel-doc and typos
Fix pci kernel-doc parameter missing notation, correct
function name, and fix typo:

Warning(linux-2.6.28-git10//drivers/pci/pci.c:1511): No description found for parameter 'exclusive'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-13 12:03:08 -08:00
Rafael J. Wysocki
49c968111a PCI PM: Read power state from device after trying to change it on resume
pci_restore_standard_config() unconditionally changes current_state
to PCI_D0 after attempting to change the device's power state, but
it should rather read the actual current power state from the
device.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:22:28 -08:00
Rafael J. Wysocki
144a76bc88 PCI PM: Check if the state has been saved before trying to restore it
Check if the standard configuration registers of a PCI device have
been saved during suspend before trying to restore them during
resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-By: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:20:39 -08:00
Rafael J. Wysocki
476e7faefc PCI PM: Do not wait for buses in B2 or B3 during resume
pci_restore_standard_config() adds extra delay for PCI buses in
low power states (B2 or B3), but this is only correct for buses in
B2, because the buses in B3 are reset when they are put back into
B0.  Thus we should wait for such buses to settle after the reset,
but it's not a good idea to wait that long (1.1 s) with interrupts
off.

On the other hand, we have never waited for buses in B2 and B3
during resume and it seems reasonable to go back to this well
tested behaviour.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:47:10 -08:00
Rafael J. Wysocki
48f67f54a5 PCI PM: Power up devices before restoring their state
Devices that have MSI-X enabled before suspend to RAM or hibernation
and that are in a low power state during resume will not be handled
correctly by pci_restore_standard_config().  Namely, it first calls
pci_restore_state() which calls pci_restore_msi_state(), which in turn
executes __pci_restore_msix_state() that accesses the device's memory
space to restore the contents of the MSI-X table.  However, if the
device is in a low power state at this point, it's memory space is
not accessible.

The easiest way to fix this potential problem is to make
pci_restore_standard_config() call pci_restore_state() after
it has put the device into the full power state, D0.  Fortunately,
all of this is done with interrupts off, so the change of ordering
should not cause any trouble.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:47:02 -08:00
Rafael J. Wysocki
aa8c6c9374 PCI PM: Restore standard config registers of all devices early
There is a problem in our handling of suspend-resume of PCI devices that
many of them have their standard config registers restored with
interrupts enabled and they are put into the full power state with
interrupts enabled as well.  This may lead to the following scenario:
  * an interrupt vector is shared between two or more devices
  * one device is resumed earlier and generates an interrupt
  * the interrupt handler of another device tries to handle it and
    attempts to access the device the config space of which hasn't been
    restored yet and/or which still is in a low power state
  * the system crashes as a result

To prevent this from happening we should restore the standard
configuration registers of all devices with interrupts disabled and we
should put them into the D0 power state right after that.
Unfortunately, this cannot be done using the existing
pci_set_power_state(), because it can sleep.  Also, to do it we have to
make sure that the config spaces of all devices were actually saved
during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-16 12:57:58 -08:00
Linus Torvalds
50246dd41c Revert "PCI PM: Register power state of devices during initialization"
This reverts commit 98e6e286d7, as Yinghai
Lu reports that it breaks kexec with at least the e1000 and e1000e
drivers.  The reason is that the shutdown sequence puts the hardware
into D3 sleep, and the commit causes us to claim that it then is in D0
(running) state just because we don't understand the PM capabilities.

Which then later makes "pci_set_power_state()" not do anything, and the
device never wakes up properly and just returns 0xff to everything.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: From: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16 08:14:51 -08:00
Rafael J. Wysocki
98e6e286d7 PCI PM: Register power state of devices during initialization
Use the observation that the power state of a PCI device can be
loaded into its pci_dev structure as soon as pci_pm_init() is run for
it and make that happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:18:04 -08:00
Rafael J. Wysocki
734104292f PCI PM: Avoid touching devices behind bridges in unknown state
It generally is better to avoid accessing devices behind bridges that
may not be in the D0 power state, because in that case the bridges'
secondary buses may not be accessible.  For this reason, during the
early phase of resume (ie. with interrupts disabled), before
restoring the standard config registers of a device, check the power
state of the bridge the device is behind and postpone the restoration
of the device's config space, as well as any other operations that
would involve accessing the device, if that state is not D0.

In such cases the restoration of the device's config space will be
retried during the "normal" phase of resume (ie. with interrupts
enabled), so that the bridge can be put into D0 before that happens.

Also, save standard configuration registers of PCI devices during the
"normal" phase of suspend (ie. with interrupts enabled), so that the
bridges the devices are behind can be put into low power states (we
don't put bridges into low power states at the moment, but we may
want to do it in the future and it seems reasonable to design for
that).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:16:05 -08:00
Rafael J. Wysocki
fa58d305d9 PCI PM: Add suspend counterpart of pci_reenable_device
PCI devices without drivers are not disabled during suspend and
hibernation, but they are enabled during resume, with the help of
pci_reenable_device(), so there is an unbalanced execution of
pcibios_enable_device() in the resume code path.

To correct this introduce function pci_disable_enabled_device()
that will disable the argument device, if it is enabled when the
function is being run, without updating the device's pci_dev
structure and use it in the suspend code path to balance the
pci_reenable_device() executed during resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:14:40 -08:00
Ben Hutchings
6a479079c0 PCI: Add pci_clear_master() as opposite of pci_set_master()
During an online device reset it may be useful to disable bus-mastering.
pci_disable_device() does that, and far more besides, so is not suitable
for an online reset.

Add pci_clear_master() which does just this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:23 -08:00
Bjorn Helgaas
68feac87de PCI: add pci_common_swizzle() for INTx swizzling
This patch adds pci_common_swizzle(), which swizzles INTx values all the
way up to a root bridge.

This common implementation can replace several architecture-specific
ones.  This should someday be combined with pci_get_interrupt_pin(),
but I left it separate for now to make reviewing easier.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:12 -08:00
Rafael J. Wysocki
f06fc0b6f8 PCI PM: Fix pci_update_current_state
Currently, PCI devices without the PM capability that are power
manageable by the platform (eg. ACPI) are not handled correctly
by pci_set_power_state(), because their current_state field is not
updated to reflect the new power state of the device.  Fix this by
making pci_update_current_state() accept additional argument
representing the power state of the device as set by the platform.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:08 -08:00
Jesse Barnes
eb9c39d031 PCI: set device wakeup capable flag if platform support is present
When PCI devices are initialized, we check whether they support PCI PM
caps and set the device can_wakeup flag if so.  However, some devices
may have platform provided wakeup events rather than PCI PME signals, so
we need to set can_wakeup in that case too.  Doing so should allow
wakeups from many more devices, especially on cost constrained systems.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Joseph Chan <JosephChan@via.com.tw>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:07 -08:00
Yu Zhao
613e7ed6f7 PCI: add a new function to map BAR offsets
Add a function to map a given resource number to a corresponding
register so drivers can get the offset and type of device specific BARs.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:04 -08:00
Yu Zhao
bc5f5a8277 PCI: remove unnecessary condition check in pci_restore_bars()
Remove the unnecessary number of resources condition checks because
the pci_update_resource() will check availability of the resources.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:01 -08:00
Yu Zhao
14add80b51 PCI: remove unnecessary arg of pci_update_resource()
This cleanup removes unnecessary argument 'struct resource *res' in
pci_update_resource(), so it takes same arguments as other companion
functions (pci_assign_resource(), etc.).

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:00 -08:00
Andrew Morton
1684f5ddd4 PCI: uninline pci_ioremap_bar()
It's too large to be inlined.

Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:57 -08:00
Alan Stern
bebd590ca2 PCI: fix incorrect error return in pci_enable_wake
This patch (as1186) fixes a minor mistake in pci_enable_wake().  When
the routine is asked to disable remote wakeup, it should not return an
error merely because the device is not allowed to do wakeups!

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:56 -08:00
Bjorn Helgaas
57c2cf71c1 PCI: add pci_swizzle_interrupt_pin()
This patch adds pci_swizzle_interrupt_pin(), which implements the
INTx swizzling algorithm specified in Table 9-1 of the "PCI-to-PCI
Bridge Architecture Specification," revision 1.2.

There are many architecture-specific implementations of this
swizzle that can be replaced by this common one.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:50 -08:00
Bjorn Helgaas
878f2e50fd PCI: use config space encoding in pci_get_interrupt_pin()
This patch makes pci_get_interrupt_pin() return values encoded
the same way as the "Interrupt Pin" value in PCI config space,
i.e., 1=INTA, ..., 4=INTD.

pirq_bios_set() is the only in-tree caller of pci_get_interrupt_pin()
and pci_get_interrupt_pin() is not exported.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:48 -08:00
Rafael J. Wysocki
63f4898ace PCI: handle PCI state saving with interrupts disabled
Since interrupts will soon be disabled at PCI resume time, we need to
pre-allocate memory to save/restore PCI config space (or use GFP_ATOMIC,
but this is safer).

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:40 -08:00
Arjan van de Ven
e8de1481fd resource: allow MMIO exclusivity for device drivers
Device drivers that use pci_request_regions() (and similar APIs) have a
reasonable expectation that they are the only ones accessing their device.
As part of the e1000e hunt, we were afraid that some userland (X or some
bootsplash stuff) was mapping the MMIO region that the driver thought it
had exclusively via /dev/mem or via various sysfs resource mappings.

This patch adds the option for device drivers to cause their reserved
regions to the "banned from /dev/mem use" list, so now both kernel memory
and device-exclusive MMIO regions are banned.
NOTE: This is only active when CONFIG_STRICT_DEVMEM is set.

In addition to the config option, a kernel parameter iomem=relaxed is
provided for the cases where developers want to diagnose, in the field,
drivers issues from userspace.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:32 -08:00
Andrew Patterson
07ae95f988 ACPI/PCI: PCI MSI _OSC support capabilities called when root bridge added
The _OSC capability OSC_MSI_SUPPORT is set when the root bridge is added
with pci_acpi_osc_support(), so we no longer need to do it in the PCI
MSI driver.  Also adds the function pci_msi_enabled, which returns true
if pci=nomsi is not on the kernel command-line.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:31 -08:00
Andrew Patterson
0ef5f8f615 ACPI/PCI: PCI extended config _OSC support called when root bridge added
The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root
bridge is added with pci_acpi_osc_support() if we can access PCI
extended config space.

This adds the function pci_ext_cfg_avail which returns true if we can
access PCI extended config space (offset greater than 0xff). It
currently only returns false if arch=x86 and raw_pci_ext_ops is not set
(which might happen if pci=nommcfg is set on the kernel command-line).

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:28 -08:00
Sheng Yang
1ca887970a PCI: Extend pci_reset_function() to support PCI Advanced Features
Some PCI devices implement PCI Advanced Features, which means they
support Function Level Reset(FLR).  Implement support for that in
pci_reset_function.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:25 -08:00
Sheng Yang
d91cdc7455 PCI: Refactor pci_reset_function()
Separate out function level reset so that pci_reset_function can be more
easily extended.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:23 -08:00
Al Viro
ad04d31e5f pci_setup() is init, not devinit
for fsck sake, it's used only when parsing kernel command line...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:37 -08:00
Sheng Yang
1df8fb3d5f PCI: Fix disable IRQ 0 in pci_reset_function()
Before initialization, dev->irq may be zero. Make sure we don't disable
it at reset time in that case.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-19 14:12:29 -08:00
Zhao, Yu
8113587c2d PCI: fix ARI code to be compatible with mixed ARI/non-ARI systems
The original ARI support code has a compatibility problem with non-ARI
devices.  If a device doesn't support ARI, turning on ARI forwarding on
its upper level bridge will cause undefined behavior.

This fix turns on ARI forwarding only when the subordinate devices
support it.

Tested-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23 14:42:13 -07:00
Sheng Yang
8dd7f8036c PCI: add support for function level reset
Sometimes, it's necessary to enable software's ability to quiesce and
reset endpoint hardware with function-level granularity, so provide
support for it.

The patch implement Function Level Reset(FLR) feature following PCI-e
spec. And this is the first step. We would add more generic method, like
D0/D3, to allow more devices support this function.

The patch contains two functions. pcie_reset_function() is the new
driver API, and, contains some action to quiesce a device.  The other
function is a helper:  pcie_execute_reset_function() just executes the
reset for a particular device function.

Current the usage model is in KVM. Function reset is necessary for
assigning device to a guest, or moving it between partitions.

For Function Level Reset(FLR), please refer to PCI Express spec chapter
6.6.2.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:35 -07:00
Taku Izumi
d389fec6a2 ACPI/PCI: Set support bit for MSI in support field of _OSC
Currently linux doesn't have any code to set the "MSI supported" bit in
Support Fireld of _OSC. This patch adds the code for that.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22 16:42:35 -07:00
Yu Zhao
58c3a727cb PCI: support PCIe ARI capability
This patch adds support for PCI Express Alternative Routing-ID
Interpretation (ARI) capability.

The ARI capability extends the Function Number field of the PCI Express
Endpoint by reusing the Device Number which is otherwise hardwired to 0.
With ARI, an Endpoint can have up to 256 functions.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:54:32 -07:00
Zhao, Yu
557848c3c0 PCI: replace cfg space size (256/4096) by macros.
This is a cleanup that changes all PCI configuration space size
representations to the macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from
drivers/pci/probe.c to drivers/pci/pci.h.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:54:29 -07:00
Jesse Barnes
ec84f1268f PCI: fix -Wakpm warnings in pci_pm_init debug output
Checkpatch would have complained about this but neither Bjorn nor myself
ran it prior to pushing.  Fixup the issues Andrew pointed out.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:54:18 -07:00
Bjorn Helgaas
c9ed77eeba PCI: tidy PME support messages
This patch changes these two messages:

    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2

to this:

    pci 0000:00:03.0: supports D1 D2

It also trivially converts a "dev_printk(KERN_INFO, ...)" to
"dev_info(...)".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:46 -07:00
Rafael J. Wysocki
0235c4fc7f PCI PM: Introduce function pci_wake_from_d3
Many device drivers use the following sequence of statements to enable
the device to wake up the system while being in the D3_hot or D3_cold
low power state:

        pci_enable_wake(pdev, PCI_D3hot, 1);
        pci_enable_wake(pdev, PCI_D3cold, 1);

However, the second call is not necessary if the first one succeeds (the
ordering of the statements above doesn't matter here) and it may even be
harmful, because we are not supposed to enable PME# after the wake-up
power has been enabled for the device.

To allow drivers to overcome this problem, introduce function
pci_wake_from_d3() that will enable the device to wake up the system
from any of D3_hot and D3_cold as long as the wake-up from at least one
of them is supported.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:41 -07:00
Benjamin Herrenschmidt
096e6f673d pci: Use new %pR to print resource ranges
This converts things in drivers/pci to use %pR to printout the
content of a struct resource instead of hand-casted %llx or
other variants.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 09:12:32 -07:00
Rafael J. Wysocki
5a6c9b60b4 PCI PM: Export pci_pme_active to drivers
Export pci_pme_active() to drivers, so that they can clear the
PME_status bit and disable PME# for their devices without involving
ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-07 15:33:36 -07:00
Alan Cox
979b1791e5 PCI: add D3 power state avoidance quirk
Libata has some hacks to deal with certain controllers going silly in D3
state. The right way to handle this is to keep a PCI device flag for
such devices. That can then be generalised for no ATA devices with power
problems.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 15:12:11 -07:00
Jesse Barnes
3713907423 PCI: document pci_target_state
The empty kdoc was causing warnings, so provide some actual documentation.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 11:49:26 -07:00
Rafael J. Wysocki
e5899e1b7d PCI PM: make more PCI PM core functionality available to drivers
Make more PCI PM core functionality available to drivers

* Export pci_pme_capable() so that it can be called directly by
  drivers (for example, tg3 needs that).

* Move the state choosing part of pci_prepare_to_sleep() to a
  separate function, pci_target_state(), that can be called directly
  by drivers (for example, tg3 needs that).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-22 14:25:38 -07:00
Randy Dunlap
443bd1c4dd pci kernel-doc fatal error
Fix kernel-doc comments so that they don't produce errors.
Also cut some extraneous copy-paste text.

Error(linhead//drivers/pci/pci.c:1133): duplicate section name 'Description'
Error(linhead//drivers/pci/pci.c:1189): duplicate section name 'Description'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21 10:43:26 -07:00
Stephen Rothwell
c300bd2fb5 PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable().
The latter also needs to be stubbed out for !CONFIG_PM.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-14 14:30:21 -07:00
Rafael J. Wysocki
c157dfa3e4 PCI PM: Fix pci_prepare_to_sleep
The recently introduced pci_prepare_to_sleep() needs the following fix,
because there are systems which are not power manageable by ACPI (ie.
ACPI doesn't provide methods to put the device into low power states and
back), but require ACPI hooks to be executed for wake-up to work.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-14 14:25:44 -07:00
Rafael J. Wysocki
337001b6c4 PCI: Simplify PCI device PM code
If the offset of PCI device's PM capability in its configuration space,
the mask of states that the device supports PME# from and the D1 and D2
support bits are cached in the corresponding struct pci_dev, the PCI
device PM code can be simplified quite a bit.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:26:50 -07:00
Rafael J. Wysocki
404cc2d8ce PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(),
to be used by the PCI drivers that want to place their devices into
the lowest power state appropiate for them (PCI_D3hot, if the device
is not supposed to wake up the system, or the deepest state from
which the wake-up is possible, otherwise) while the system is being
prepared to go into a sleeping state and to put them back into D0
during the subsequent transition to the working state.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:26:33 -07:00
Rafael J. Wysocki
eb9d0fe40e PCI ACPI: Rework PCI handling of wake-up
* Introduce function acpi_pm_device_sleep_wake() for enabling and
  disabling the system wake-up capability of devices that are power
  manageable by ACPI.

* Introduce function acpi_bus_can_wakeup() allowing other (dependent)
  subsystems to check if ACPI is able to enable the system wake-up
  capability of given device.

* Introduce callback .sleep_wake() in struct pci_platform_pm_ops and
  for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake().

* Introduce callback .can_wakeup() in struct pci_platform_pm_ops and
  for the ACPI 'driver' make it use acpi_bus_can_wakeup().

* Move the PME# handlig code out of pci_enable_wake() and split it
  into two functions, pci_pme_capable() and pci_pme_active(),
  allowing the caller to check if given device is capable of
  generating PME# from given power state and to enable/disable the
  device's PME# functionality, respectively.

* Modify pci_enable_wake() to use the new ACPI callbacks and the new
  PME#-related functions.

* Drop the generic .platform_enable_wakeup() callback that is not
  used any more.

* Introduce device_set_wakeup_capable() that will set the
  power.can_wakeup flag of given device.

* Rework PCI device PM initialization so that, if given device is
  capable of generating wake-up events, either natively through the
  PME# mechanism, or with the help of the platform, its
  power.can_wakeup flag is set and its power.should_wakeup flag is
  unset as appropriate.

* Make ACPI set the power.can_wakeup flag for devices found to be
  wake-up capable by it.

* Make the ACPI wake-up code enable/disable GPEs for devices that
  have the wakeup.flags.prepared flag set (which means that their
  wake-up power has been enabled).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:26:28 -07:00
Rafael J. Wysocki
44e4e66eea PCI: rework pci_set_power_state function to call platform first
Rework pci_set_power_state() so that the platform callback is
invoked before the native mechanism, if necessary.  Also, make
the function check if the device is power manageable by the
platform before invoking the platform callback.

This may matter if the device dependent on additional power
resources controlled by the platform is being put into D0, in which
case those power resources must be turned on before we attempt to
handle the device itself.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:25:43 -07:00
Rafael J. Wysocki
961d9120fa PCI: Introduce platform_pci_power_manageable function
Introduce function pointer platform_pci_power_manageable to be used
by the platform-related code to point to a function allowing us to
check if given device is power manageable by the platform.

Introduce acpi_pci_power_manageable() playing that role for ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07 16:25:10 -07:00