Commit Graph

6078 Commits

Author SHA1 Message Date
Tejun Heo
cafb0bfca1 staging: Convert to bdops->check_events()
Convert two staging drivers - blkvsc_drv and cyasblkdev_block - from
->media_changed() to ->check_events().  The former always indicated
media changed while the latter always indicated media not changed.
Not sure what the drivers are trying to achieve but keep the original
behavior.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:29 +01:00
Linus Torvalds
b477958314 Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: zram: fix data corruption issue
  Staging: Comedi: Fix a few NI module dependencies
  Staging: comedi: Add MODULE_LICENSE and similar to NI modules
  staging: brcm80211: bugfix for softmac crash on multi cpu configurations
  staging: sst: Fix for dmic capture on v2 pmic
  staging: hv: Enable sending GARP packet after live migration
2011-02-10 12:19:23 -08:00
Nitin Gupta
5414e557fc staging: zram: fix data corruption issue
In zram_read() and zram_write() we were not incrementing the
index number and thus were reading/writing values from/to
incorrect sectors on zram disk, resulting in data corruption.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-09 11:39:51 -08:00
Ian Abbott
0742cecbd4 Staging: Comedi: Fix a few NI module dependencies
The ni_tio and ni_tio modules do not depend on the 8255 module, but the
ni_atmio, ni_mio_cs and ni_pcimio modules do need the 8255 module.  The
ni_pcimio module also needs the comedi_fc module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-09 11:39:50 -08:00
Ian Abbott
3c323c01b6 Staging: comedi: Add MODULE_LICENSE and similar to NI modules
As mentioned by W. Trevor King on the devel@linuxdriverproject.org list
on "Thu, 27 Jan 2011 18:52:15 -0500", "Message-ID:
<20110127235214.GA5107@thialfi.dhcp.drexel.edu>", the ni_pcimio module
is missing module metadata, including a license.

This patch adds module metadata to all the NI comedi driver modules.  It
also removes a duplicate MODULE_LICENSE("GPL") line from the "mite"
module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: W. Trevor King <wking@drexel.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-09 11:39:50 -08:00
Linus Torvalds
f2f1756d7d Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] fix saa7111 non-detection
  [media] rc/streamzap: fix reporting response times
  [media] mceusb: really fix remaining keybounce issues
  [media] rc: use time unit conversion macros correctly
  [media] rc/ir-lirc-codec: add back debug spew
  [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
  [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
  [media] hdpvr: fix up i2c device registration
  [media] rc/mce: add mappings for missing keys
  [media] gspca - zc3xx: Discard the partial frames
  [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
  [media] gspca - zc3xx: Bad delay when given by a table
2011-02-02 17:52:19 -08:00
Roland Vossen
6a3be6e6e7 staging: brcm80211: bugfix for softmac crash on multi cpu configurations
Solved a locking issue that resulted in driver crashes with the 43224 and 43225
chips. The problem has been reported on several fora. Root cause was two fold:
hardware was being manipulated by two unsynchronized threads, and a scan
operation could interfere with an ongoing dynamic calibration process. Fix was
to invoke a lock on wl_ops_config() operation and to set internal flags when a
scan operation is started and stopped.

Please add this to the staging-linus branch.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02 15:06:15 -08:00
Harsha Priya
454f1419f1 staging: sst: Fix for dmic capture on v2 pmic
currently capture through dmic captures only silence

This patch configurs the dmic registers to capture properly

Signed-off-by: Harsha Priya <priya.harsha@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02 15:06:14 -08:00
Haiyang Zhang
7c161d0b90 staging: hv: Enable sending GARP packet after live migration
The hv_netvsc gets RNDIS_STATUS_MEDIA_CONNECT event after the VM
is live migrated. Adding call to netif_notify_peers() for this event
to send GARP (Gratuitous ARP) to notify network peers. Otherwise,
the VM's network connection may stop after a live migration.

This patch should also be applied to stable kernel 2.6.32 and later.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02 15:06:14 -08:00
Linus Torvalds
fb1c6348b2 Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...
2011-02-01 08:06:31 +10:00
Jarod Wilson
5766d204ae [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers
respectively, have a zilog z8 chip exposed via i2c. These are both
usb-connected devices, and on both of them, back-to-back i2c_master_send
calls that work fine with a z8 on a pci card fail with a -EIO, as the
chip isn't yet ready from the prior command. To cope with that, add a
delay and retry loop where necessary.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:18:42 -02:00
Linus Torvalds
52cea8a4b0 Merge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Delete zero-length drivers/staging/vme/bridges/Module.symvers
2011-01-31 12:54:54 +10:00
Jeff Garzik
5f92acc896 Delete zero-length drivers/staging/vme/bridges/Module.symvers
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28 03:23:42 -05:00
Torben Hohn
ac751efa6a console: rename acquire/release_console_sem() to console_lock/unlock()
The -rt patches change the console_semaphore to console_mutex.  As a
result, a quite large chunk of the patches changes all
acquire/release_console_sem() to acquire/release_console_mutex()

This commit makes things use more neutral function names which dont make
implications about the underlying lock.

The only real change is the return value of console_trylock which is
inverted from try_acquire_console_sem()

This patch also paves the way to switching console_sem from a semaphore to
a mutex.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert]
Signed-off-by: Torben Hohn <torbenh@gmx.de>
Cc: Thomas Gleixner <tglx@tglx.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 10:50:06 +10:00
Axel Köllhofer
6b28405395 staging: r8712u: Add new device IDs
This patch adds several new device ids to the r8712u staging driver.
The new ids were retrieved from latest vendor driver (v2.6.6.0.20101111)
downloadable from www.realtek.com.tw

Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.37]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-25 04:53:59 +08:00
Arend van Spriel
4032ec639a staging: brcm80211: fix suspend/resume issue in brcmsmac
PCI PM suspend callback took down the interface and resume brought
it back up. In the mac80211 context this is done in subsequent calls.
Rework implementation so that suspend only stores config, and sets
PCI power state. The resume return to full power state (D0), restores
the config, and brings hardware back up. Full bringup is done by
subsequent mac80211 calls.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 06:32:22 -08:00
Arend van Spriel
d062d44a83 staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
The driver assumed it would receive skb packets from MAC80211 which
are not cloned. To guard this assumption an assert was placed in
the transmit routine. As of kernel 2.6.37 it turns out MAC80211 does
pass skb packets that are cloned. The assert is also not needed as
it does not lead to a failure state in our driver when the packet is
cloned. Therefore the assert can safely be removed.

> commit f8a0a78148
> Author: Felix Fietkau <nbd@openwrt.org>
> Date:   Sat Dec 18 19:30:50 2010 +0100
>
>     mac80211: fix potentially redundant skb data copying
>
>     When an skb is shared, it needs to be duplicated, along with its data
>     If the skb does not have enough headroom, using skb_copy might cause t
>     buffer to be copied twice (once by skb_copy and once by pskb_expand_he
>     Fix this by using skb_clone initially and letting ieee80211_skb_resize
>     out the rest.
>
>     Signed-off-by: Felix Fietkau <nbd@openwrt.org>
>     Signed-off-by: John W. Linville <linville@tuxdriver.com>
>

Acked-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 06:32:22 -08:00
Roland Stigge
41135b1ca2 Staging: iio: Aditional fixpoint formatted output bugfix
iio: Additional fixpoint formatted output bugfixes

Fix some ADC/DAC drivers' _scale interface to correct fixpoint formatted output

This patch adds the fixes to ad7887_core.c and ad5446.c

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 06:32:21 -08:00
Max Vozeler
01446ef5af staging: usbip: vhci: use urb->dev->portnum to find port
The access to pending_port was racy when two devices
were being attached at the same time.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:50 -08:00
Max Vozeler
bd65f6233f staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
If there is a receive timeout without any active
requests, we can tell the connection was idle and
ignore the timeout.

If there are active requests for which we expect
to receive a reply we close the connection.

This makes it possible to set an upper bound on
the time a usbip device may be unresponsive.

This is a workaround for the lack of heart-beat
messages in the USBIP protocol.

Extending the protocol would break compatibility
with all previous stub versions, so this seems like
the lesser evil.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
7e249c8b07 staging: usbip: vhci: friendly log messages for connection errors
Also changes the event on connection close to be
VDEV_EVENT_DOWN - no functional change.

Signed-off-by: Max Vozeler <max@vozeler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
6d212153a8 staging: usbip: vhci: refuse to enqueue for dead connections
There can be requests to enqueue URBs while we are shutting
down a connection.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
b92a5e2373 staging: usbip: vhci: give back URBs from in-flight unlink requests
If we never received a RET_UNLINK because the TCP
connection broke the pending URBs still need to be
unlinked and given back.

Previously processes would be stuck trying to kill
the URB even after the device was detached.

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:49 -08:00
Max Vozeler
7606ee8aa3 staging: usbip: vhci: update reference count for usb_device
This fixes an oops observed when reading status during
removal of a device:

[ 1706.648285] general protection fault: 0000 [#1] SMP
[ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status
[ 1706.648297] CPU 1
[ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom
[ 1706.648324] Supported: Yes
[ 1706.648327] Pid: 10422, comm: usbip Tainted: G          N  2.6.32.12-0.7-xen #1
[ 1706.648330] RIP: e030:[<ffffffff801b10d5>]  [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648340] RSP: e02b:ffff8800a994dd30  EFLAGS: 00010286
[ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002
[ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c
[ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006
[ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab
[ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa
[ 1706.648363] FS:  00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000
[ 1706.648367] CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660
[ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200)
[ 1706.648385] Stack:
[ 1706.648387]  ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab
[ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004
[ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000
[ 1706.648404] Call Trace:
[ 1706.648413]  [<ffffffff801b28c9>] string+0x39/0xe0
[ 1706.648419]  [<ffffffff801b339b>] vsnprintf+0x1eb/0x620
[ 1706.648423]  [<ffffffff801b3813>] sprintf+0x43/0x50
[ 1706.648429]  [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd]
[ 1706.648438]  [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60
[ 1706.648445]  [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0
[ 1706.648451]  [<ffffffff800da4a7>] vfs_read+0xc7/0x130
[ 1706.648457]  [<ffffffff800da613>] sys_read+0x53/0xa0
[ 1706.648462]  [<ffffffff80007458>] system_call_fastpath+0x16/0x1b
[ 1706.648468]  [<00007f2f2de40f30>] 0x7f2f2de40f30
[ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83
[ 1706.648507] RIP  [<ffffffff801b10d5>] strnlen+0x5/0x40
[ 1706.648511]  RSP <ffff8800a994dd30>
[ 1706.649575] ---[ end trace b4eb72bf2e149593 ]---

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:48 -08:00
Max Vozeler
2d8f4595d1 staging: usbip: stub: update refcounts for devices and interfaces
The stub driver expects to access the usb interface
and usb device structures even if the device has been
disconnected in the meantime.

This change gets a reference to them in the stub probe
function using usb_get_intf()/usb_get_dev() and drops them
in the disconnect function.

This fixes an oops observed with a Logic Controls Line
display (0fa8:a030) which disconnects itself when it is
reset:

[ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5
[ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0
[ 1348.562374] *pde = 00000000
[ 1348.562397] Oops: 0000 [#1]
[ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue
[ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via
[ 1348.562649]
[ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C
[ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0
[ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0
[ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00
[ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38
[ 1348.562824]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000)
[ 1348.562884] Stack:
[ 1348.562900]  d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230
[ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d
[ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94
[ 1348.563042] Call Trace:
[ 1348.563073]  [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip]
[ 1348.563114]  [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod]
[ 1348.563156]  [<c014e760>] ? autoremove_wake_function+0x0/0x50
[ 1348.563193]  [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod]
[ 1348.563230]  [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod]
[ 1348.563265]  [<c014e374>] ? kthread+0x74/0x80
[ 1348.563294]  [<c014e300>] ? kthread+0x0/0x80
[ 1348.563326]  [<c0103c47>] ? kernel_thread_helper+0x7/0x10
[ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b
[ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38
[ 1348.563570] CR2: 000000005f7433e5
[ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]---

Signed-off-by: Max Vozeler <max@vozeler.com>
Tested-by: Mark Wehby <MWehby@luxotticaRetail.com>
Tested-by: Steven Harms <sharms@luxotticaRetail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 16:01:48 -08:00
Omar Ramirez Luna
85d139c977 staging: tidspbridge: replace mbox callback with notifier_call
Lately, mailbox callbacks have been replaced by notifier block
call chains, this needs to be changed in the users of mailbox,
otherwise compilation will break due to missing parameters.

For this new change to work, io_mbox_msg needs to be compatible
with the notifier_call definition.

Reported-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:19:47 -08:00
Ian Abbott
d1ce318496 staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
The ni_labpc driver module only requests a shared IRQ for PCI devices,
requesting a non-shared IRQ for non-PCI devices.
As this module is also used by the ni_labpc_cs module for certain
National Instruments PCMCIA cards, it also needs to request a shared IRQ
for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus
controller.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:15:51 -08:00
roel kluin
e7bf352fcd Staging: speakup: &&/|| confusion in silent_store()
Fix test: the branch is always taken.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:07 -08:00
Roland Stigge
e71a7fd259 iio: Fixpoint formatted output bugfix
Fix some ADC drivers' _scale interface to correct fixpoint formatted output

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:07 -08:00
Denis Kirjanov
9c33008412 staging: rt2860: Fix incorrect netif_stop_queue usage warning
The TX queues are allocated inside register_netdev.
It doesn't make any sense to stop the queue before
allocation.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:06:06 -08:00
Larry Finger
e375870b92 staging: r8712u: Fix memory leak in firmware loading
The error path leaks the firmware struct.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:24 -08:00
Guzman Lugo, Fernando
8e290fd41a staging: tidspbridge: configure full L1 MMU range
IVA MMU can manage up to 4GB of address space through its page tables,
given that it's L1 is divided into 1MB sections it requires at least
16KB for its table which represents 4096 entries of 32 bits each.

Previously, only 1GB was being handled by setting the page table size
to 4KB, any virtual address beyond of the L1 size used, would fall
into memory that does not belong to L1 translation tables, leading to
unpredictable results.

So, set the L1 table size to cover the entire MMU range (4GB) whether
is meant to be used or not.

Reported-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:24 -08:00
Larry Finger
27c82819a5 staging: rt2870sta: Add ID for Linksys WUSB100v2
This device was tested with rt2870sta by setting new_id.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Brian Ormond <brian.ormond@oit.edu>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:23 -08:00
Dan Carpenter
a65fd09ac5 Staging: xgfib: put parenthesis in the right place
In the original code the parenthesis are in the wrong position, so the
conditions are always true.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:23 -08:00
Dan Carpenter
f32b8453e5 Staging: ste_rmi4: use after input_unregister_device()
The original code called input_free_device(rmi4_data->input_dev) after
input_unregister_device(rmi4_data->input_dev) and that's a double free.
This is described in the comments to input_unregister_device().

The normal way to handle this is to make input_register_device() the
last function in the probe which can fail.  That way you can avoid the
call to input_unregister_device() entirely.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:23 -08:00
Phillip Simbwa
64911e4b13 Staging: ath6kl: fix potential buffer overflow
Off by one

Signed-off-by: Phillip Simbwa <simbwa at gmail dot com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 12:01:23 -08:00
Hank Janssen
a786f91527 staging: hv: Removed unneeded call to netif_stop_queue() in hv_netvsc
Removed the call to netif_stop_queue() in netvsc_probe() as
the queue is not initialized at that point and further call
to it after queue initialization is really not necessary.

This change was prompted after an upstream change went into
2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue
is called before register with netdev is done.

This will eliminate the warning message to the log when hv_netvsc
driver starts up.

Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 11:58:27 -08:00
Timo Teräs
d70c673153 staging: hv: fix netvsc sleeping while atomic
The channel callbacks are called directly from vmbus_event_dpc
which runs in tasklet context. These callbacks need to use
GFP_ATOMIC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 11:58:26 -08:00
Ky Srinivasan
268eff909a Staging: hv: fix sysfs symlink on hv block device
The block device does not create the proper symlink in sysfs because we
forgot to set up the gendisk structure properly.  This patch fixes the
issue.

Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 11:58:26 -08:00
Greg Kroah-Hartman
fec2be706d Staging: remove unintended Module.symvers file
commit a82ad05ecd (staging: vme: tsi148:
fix warning in free_irq) accidentally added a Module.symvers file to the
git tree.

This patch removes it, sorry about that.

Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20 09:13:14 -08:00
Jarod Wilson
88914bdf8c [media] staging/lirc: fix mem leaks and ptr err usage
When the lirc drivers were converted over to using memdup_user, I
mistakenly also removed corresponding calls to kfree. Add those back. I
also screwed up on the allocation error check in lirc_serial, using if
(PTR_ERR()) instead of if (IS_ERR()), which broke transmit.

Reported-by: Jiri Fojtasek <jiri.fojtasek@hlohovec.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:22 -02:00
Andy Walls
1f1bfaa0a2 [media] lirc_zilog: Update TODO.lirc_zilog
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:11 -02:00
Andy Walls
c2790c7192 [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:10 -02:00
Andy Walls
6830661ead [media] lirc_zilog: Remove useless struct i2c_driver.command function
The ir_command() function is a do-nothing stub; remove it.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:09 -02:00
Andy Walls
8090232a23 [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
The driver is now structured so that it must handle an IR Tx unit
for a Z8 IR chip, or it refuses to handle that Z8 IR chip.  This
allows us to assume that ir->tx != NULL in a few places in the driver,
and also allows us to always report Tx is available to userspace.
Get rid of unneeded tests for ir->tx == NULL and always report that
Tx is available.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:08 -02:00
Andy Walls
b757730b02 [media] lirc_zilog: Update IR Rx polling kthread start/stop and some printks
The IR Rx polling thread was originally a kernel_thread long ago,
and had only been minimally converted to a kthread.  This patch
finishes that conversion by

- cleaning up all the unneeded completions

- destroying the kthread properly by calling kthread_stop()

- changing lirc_thread() to test kthread_should_stop() just before
	every point where it may sleep

- reorganizing the lirc_thread() function so it uses fewer lines

- modifying the name of the kthread from "lirc_zilog" to
	"zilog-rx-i2c-N", so ps will show which kthread polls
	which Zilog Z8 IR unit.

Also some minor tweaks were made to logging emitted by the
ir_probe() function.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:07 -02:00
Andy Walls
a68a9b73fb [media] lirc_zilog: Extensive rework of ir_probe()/ir_remove()
This patch is an extensive rework of the ir_probe() and ir_remove() functions.

It removes all the double binding and allocation problems on module load.

It removes almost all the memory leaks on module exit and on device
instantiation failure. Proper destruction of the Rx polling kthread still
needs investigation and more work, but it is no worse than it already was.

This rework also had side effects that include:

- encapsulation of the ir_devices[] array
- serialization of access to the ir_devices[] array
- semantic change of the module parameter "disable_rx" to "tx_only"

If tx_only is true, the module does not claim the i2c_client for the IR Rx
function, and only claims and handles the i2c_client for the IR Tx function.
This is a first step in providing the option of letting ir-kbd-i2c.c handle
IR Rx function, while lirc_zilog handles the IR Tx function.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:06 -02:00
Andy Walls
e9b351f64f [media] lirc_zilog: Don't make private copies of i2c clients
Don't make private copies of the i2c clients provided by the I2C
subsystem, don't change the client address field, and don't probe
the client addresses - the bridge driver already did that.  This
moves us to the proper I2C and binding model.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:05 -02:00
Andy Walls
06da95a3ec [media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rx
This change is a mostly mechanical break of the main struct IR
data structure into common, Rx, and Tx structures.  There were some
small logical changes required as well, such as eliminating "is_hdpvr",
to accomplish this.

This change is an intiial step in reworking lirc_zilog to decouple the
Rx and Tx handling as much as possible to fit with the new I2C
binding model.  This change actually makes lirc_zilog a little more
broken than it already was - memory deallocation in particular got worse.
However, this change makes the remaining problems easier to see and address.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:04 -02:00
Andy Walls
02fcaaa3a5 [media] lirc_zilog: Remove disable_tx module parameter
The only reason to use the lirc_zilog module is for IR Tx, so remove
the possibility of disabling IR Tx.  If the user needs only IR Rx,
then the ir-kbd-i2c module works just fine, and doesn't require a
"firmware" image.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:03 -02:00