Commit Graph

245 Commits

Author SHA1 Message Date
Trent Piepho
717167e8ae V4L/DVB (10814): saa7146: some small fixes
vidioc_enum_fmt_vid_overlay() did nothing but call
vidioc_enum_fmt_vid_cap(), so just make
saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to
vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay().

Have gparm use v4l2_video_std_frame_period to fill in the frame period
instead of just assuming PAL.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:06 -03:00
Michael Krufky
7434ca4343 V4L/DVB (10784): mxl5007t: update driver for MxL 5007T V4
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Asaf Fishov <afishov@maxlinear.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:03 -03:00
Michael Krufky
3d0081dd10 V4L/DVB (10783): mxl5007t: fix devname for hybrid_tuner_request_state
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:03 -03:00
Michael Krufky
d202515bd1 V4L/DVB (10782): mxl5007t: warn when unknown revisions are detected
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:03 -03:00
Michael Krufky
d90958e6d0 V4L/DVB (10781): mxl5007t: mxl5007t_get_status should report if tuner is locked
report TUNER_STATUS_LOCKED if rf_locked or ref_locked

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:03 -03:00
Michael Krufky
b1ff363bfe V4L/DVB (10780): mxl5007t: remove function mxl5007t_check_rf_input_power
This function does not work properly and is not necessary - remove it for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:03 -03:00
Michael Krufky
69e2333324 V4L/DVB (10779): mxl5007t: remove analog tuning code
Analog doesn't work in this driver yet. This code just adds extra bloat,
so remove it for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:02 -03:00
Igor M. Liplianin
b72857dd45 V4L/DVB (10744): dm1105: infrared remote code is remaked.
The driver infrared remote code part is altered to switch to a work queue.
Also ir_codes table moved to ir-common module for shared access.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:00 -03:00
Hans Verkuil
7f6adeaf2d V4L/DVB (10730): v4l-dvb: cleanup obsolete references to v4l1 headers.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[mchehab@redhat.com: fix compilation of tea575x-tuner.c]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:59 -03:00
Roel Kluin
51ca3bddf3 V4L/DVB (10657): [PATCH] V4L: missing parentheses?
Add missing parentheses

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:51 -03:00
Oldřich Jedlička
cb3bf504f7 V4L/DVB (10632): Added support for AVerMedia Cardbus Hybrid remote control
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b
that provides remote control key reading support for AVerMedia Cardbus
Hybrid card, possibly for other AVerMedia Cardbus cards.

The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was
disabled.

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:49 -03:00
Roel Kluin
7d979a86a9 V4L/DVB: calibration still successful at 10
With while (i++ < 10) { ... } i can reach 11, so callibration still
succeeds at i == 10.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:49 -03:00
Mauro Carvalho Chehab
9fc2c5ee5d V4L/DVB (10515): Adds IR table for the IR provided with this board and includes it at
Kaiomy entry.

Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one
of those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:43 -03:00
Mauro Carvalho Chehab
3106381440 V4L/DVB (10505): tda8290: Print an error if i2c_gate is not provided
While here, be sure that gate will be kept disabled if an error occurs.

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Mauro Carvalho Chehab
68d5ce7021 V4L/DVB (10504): tda827x: Be sure that gate will be open/closed at the proper time
The gate control logic is broken: several routines just keep it open;
other rotines close it properly; there are even other routines that
assumes that it is open without really checking or opening it.

Instead of having to manually handle the gate control and having such
troubles, let a sub-routine take care of the gate, opening it before
i2c_transfer and closing it after that. This avoids leaving the gate
into a random state.

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
230b65f994 V4L/DVB (10502): saa7146: move v4l2 device registration to saa7146_vv.
Doing the v4l2_device registration in the saa7146 core will make it
dependent on v4l2, even for DVB-only boards. This registration and
unregistration belongs in saa7146_vv instead.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
eae4d69b6a V4L/DVB (10501): saa7146: prevent unnecessary loading of v4l2-common.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
5a5b9647af V4L/DVB (10500): saa7146: setting control while capturing should return EBUSY, not EINVAL.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
1b8dac150a V4L/DVB (10499): saa7146: convert saa7146 and mxb in particular to v4l2_subdev.
Modified mxb to load the i2c modules through v4l2_subdev. So no more probing.
Modified tea6415c and tea6420 to use the standard routing ops to do the
routing, rather than using private commands. Dropped the private commands
from tda9840 (they were never used except during initialization of the
module).

Added saa7146 support for VIDIOC_DBG_G_CHIP_IDENT.

Converted saa5246a and saa5249 to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
d30e21ddcd V4L/DVB (10498): saa7146: the adapter class will be NULL when v4l2_subdev is used.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:42 -03:00
Hans Verkuil
45d809431d V4L/DVB (10497): saa7146: i2c adapdata now points to v4l2_device.
Prepare for converting to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:41 -03:00
Hans Verkuil
ef77a26be1 V4L/DVB (10496): saa7146: implement v4l2_device support.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:41 -03:00
Jochen Friedrich
b72dbaefbd V4L/DVB (10452): Add Freescale MC44S803 tuner driver
Add Freescale MC44S803 tuner driver.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:39 -03:00
Hans Verkuil
d0852ed27c V4L/DVB (10313): saa7146: fix VIDIOC_ENUMSTD.
The previous conversion to video_ioctl2 broke VIDIOC_ENUMSTD. This
is now fixed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:27 -03:00
Hans Verkuil
b960074fec V4L/DVB (10271): saa7146: convert to video_ioctl2.
The conversion to video_ioctl2 is the first phase to converting this driver
to the latest v4l2 framework.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:24 -03:00
Mauro Carvalho Chehab
ef88f2b563 V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup
As reported by David Engel <david@istwok.net>, ATSC115 doesn't work
fine with mythtv. This software opens both analog and dvb interfaces of
saa7134.

What happens is that some tuner commands are going to the wrong place,
as shown at the logs:

Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: using tuner params #0 (ntsc)
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808
Feb 12 20:37:48 opus kernel: tuner 1-0061: tv freq set to 67.25
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: using tuner params #0 (ntsc)
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808
Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: tv 0x07 0x10 0xce 0x01
Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: tv 0x07 0x10 0xce 0x01

This happens due to a hack at TUV1236D analog setup, where it replaces
tuner address, at 0x61 for 0x0a, in order to save a few memory bytes.

The code assumes that nobody else would try to access the tuner during
that setup, but the point is that there's no lock to protect such
access. So, this opens the possibility of race conditions to happen.

Instead of hacking tuner address, this patch uses a temporary var with
the proper tuner value to be used during the setup. This should save
the issue, although we should consider to write some analog/digital
lock at saa7134 driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-17 09:43:08 -03:00
Hans Verkuil
ba3ed4c57f V4L/DVB (10270): saa7146: fix unbalanced mutex_lock/unlock
The default case of the switch didn't unlock the mutex.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:47:01 -02:00
Hans Verkuil
cf8e193a48 V4L/DVB (10248): v4l-dvb: fix a bunch of compile warnings.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:38:04 -02:00
Michael Krufky
439b72b69e V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
Don't call tda8290_init_tuner unless we have either a TDA8275 or TDA8275A
present. Calling this function will cause a TDA18271 to get sick, so we
should only call it when needed.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-07 22:18:55 -02:00
Mauro Carvalho Chehab
4c27f1a4da V4L/DVB (10179): tda8290: Fix two sparse warnings
/home/v4l/master/v4l/tda8290.c:233:7: warning: symbol 'i' shadows an earlier one
/home/v4l/master/v4l/tda8290.c:178:3: warning: symbol 'fm_mode' was not declared. Should it be static?

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-07 22:18:55 -02:00
Michael Krufky
6b55009e1d V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error
A user reported the following OOPS with his pcHDTV HD5500 card, which
uses a cx88 PCI bridge with a LG-TDVS-H06xF frontend module, made up
of a TUA6034 tuner, TDA988x IF demod, and LG DT3303 ATSC/QAM demod.

Somehow, tuner-core gets loaded before the digital driver configures
the tuner, and tuner-core somehow incorrectly sets the tuner type to
LG NTSC (TAPE series) instead of LG TDVS-H06xF.  This tuner type does
not have the tuning stepsize defined, so an OOPS occurs during the
digital tune function.

We still dont know how the type gets set incorrectly in the first place.
The user has a tainted kernel with a binary nividia module, which COULD
have something to do with this, but it's hard to say for sure.

Nevertheless, to avoid this division by zero, we should check that
stepsize is defined.  If stepsize is not defined, print an error and
bail out on the tune request.

cx8800 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1
cx88[0]: TV tuner type 47, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series))
cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xea000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx88_audio 0000:05:01.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:05:01.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 19, latency: 32, mmio: 0xec000000
cx8802_probe() allocating 1 frontend(s)
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47]
cx88[0]/2: cx2388x based DVB/ATSC card
tuner-simple 2-0061: attaching existing instance
tuner-simple 2-0061: type set to 64 (LG NTSC (TAPE series))
tda9887 2-0043: attaching existing instance
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[snip]
stepsize=0
divide error: 0000 [1] SMP
CPU 1
Modules linked in: nls_utf8 fuse sco bridge stp bnep l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ftp ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table xfs lgdt330x dm_multipath cx88_dvb cx88_vp3054_i2c uinput tda9887 tda8290 snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul tuner_simple tuner_types tuner msp3400 cx8800 cx88_alsa cx8802 snd_emu10k1 cx88xx snd_rawmidi snd_ac97_codec ir_common ac97_bus saa7115 snd_seq_dummy snd_seq_oss snd_seq_midi_event videobuf_dvb snd_seq dvb_core snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_device videobuf_dma_sg ppdev parport_pc snd_timer videobuf_core snd_page_alloc btcx_risc emu10k1_gp ivtv i2c_algo_bit cx2341x snd_util_mem snd_hwdep nvidia(P) gameport v4l2_common i2c_i801 snd soundcore parport videodev v4l1_compat v4l2_compat_ioctl32 tveeprom i2c_core pcspkr iTCO_wdt iTCO_vendor_support sky2 joydev floppy shpchp ata_generic pata_acpi pata_jmicron [last unloaded: microcode]
Pid: 3553, comm: kdvb-ad-0-fe-0 Tainted: P          2.6.27.9-159.fc10.x86_64 #1
RIP: 0010:[<ffffffffa09bc37a>]  [<ffffffffa09bc37a>] simple_dvb_calc_regs+0xab/0x281 [tuner_simple]
RSP: 0018:ffff8800605dfd30  EFLAGS: 00010246
RAX: 000000000365c040 RBX: ffff8800605dfdb0 RCX: ffff88007acb8c10
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
RBP: ffff8800605dfda0 R08: ffff8800605dfba0 R09: 0000000000000082
R10: 00000010e73c9df1 R11: 0000000100000000 R12: ffff88007ac29c00
R13: ffff88007ac29c00 R14: ffff88007acbb408 R15: ffffffffa09b6fb0
FS:  0000000000000000(0000) GS:ffff88007f804880(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000004e8f40 CR3: 000000007114e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kdvb-ad-0-fe-0 (pid: 3553, threadinfo ffff8800605de000, task ffff88006fca0000)
Stack:  ffff8800605dfd40 00000000ffffffa1 ffff88007c055860 0000000000000001
 ffff8800605dfda0 ffff8800605dfda0 ffff88007acb8c10 ffffffffa004e48c
 8e01880000000390 ffff88007acb8c10 ffff88007ac29c00 0000000000000000
Call Trace:
 [<ffffffffa004e48c>] ? i2c_transfer+0x80/0x8b [i2c_core]
 [<ffffffffa09bc768>] simple_dvb_set_params+0x3e/0x9b [tuner_simple]
 [<ffffffffa0a0335a>] lgdt330x_set_parameters+0x188/0x1b9 [lgdt330x]
 [<ffffffffa08c9116>] dvb_frontend_swzigzag_autotune+0x18e/0x1b5 [dvb_core]
 [<ffffffffa08c9f6a>] dvb_frontend_swzigzag+0x1bc/0x21e [dvb_core]
 [<ffffffffa08ca4f4>] dvb_frontend_thread+0x528/0x62b [dvb_core]
 [<ffffffff810551e1>] ? autoremove_wake_function+0x0/0x38
 [<ffffffffa08c9fcc>] ? dvb_frontend_thread+0x0/0x62b [dvb_core]
 [<ffffffff81054e9b>] kthread+0x49/0x76
 [<ffffffff810116e9>] child_rip+0xa/0x11
 [<ffffffff81010a07>] ? restore_args+0x0/0x30
 [<ffffffff81054e52>] ? kthread+0x0/0x76
 [<ffffffff810116df>] ? child_rip+0x0/0x11

Code: 48 8b 05 2a 4e 00 00 41 8b 77 1c 31 d2 0f b7 40 0a 89 f1 03 45 d0 d1 e9 03 0d 23 4e 00 00 69 c0 24 f4 00 00 8d 04 01 48 8b 4d c0 <f7> f6 8a 55 d6 88 53 04 41 89 c4 c1 e8 08 88 43 01 8a 45 d7 44
RIP  [<ffffffffa09bc37a>] simple_dvb_calc_regs+0xab/0x281 [tuner_simple]
 RSP <ffff8800605dfd30>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:15:18 -02:00
Mauro Carvalho Chehab
0b82c5d674 V4L/DVB (10162): tuner-simple: Fix tuner type set message
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:14:44 -02:00
Hans Verkuil
069b747931 V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
Since internal to v4l2 the ioctl prototype is the same regardless of it
being called through .ioctl or .unlocked_ioctl, we need to convert it all
to the long return type of unlocked_ioctl.

Thanks to Jean-Francois Moine for posting an initial patch for this and
thus bringing it to our attention.

Cc: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:34 -02:00
Hans Verkuil
bec43661b1 V4L/DVB (10135): v4l2: introduce v4l2_file_operations.
Introduce a struct v4l2_file_operations for v4l2 drivers.

Remove the unnecessary inode argument.

Move compat32 handling (and llseek) into the v4l2-dev core: this is now
handled in the v4l2 core and no longer in the drivers themselves.

Note that this changeset reverts an earlier patch that changed the return
type of__video_ioctl2 from int to long. This change will be reinstated
later in a much improved version.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:12 -02:00
Devin Heitmueller
d553cc958a V4L/DVB (9923): xc5000: remove init_fw option
The init_fw option was broken for the HVR-950q because we would call the reset
callback inside of dvb_attach() and the callback had not been setup yet.

Michael Krufky (who added the init_fw feature) says it's no longer required,
so just remove the option completely.

Thanks to user Zzeiss from #linuxtv chat for reporting the issue and
Michael Krufky <mkrufky@linuxtv.org> for proposing the fix.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:19 -02:00
Mauro Carvalho Chehab
e278e746bc V4L/DVB (9913): tuner-xc2028: allow printing stack trace as debug on sleep code
tuner-xc3028 can be put to sleep to save power. However, if not properly
recovered from sleep, the device won't work. It is noticed that some
devices doesn't recover properly, so let's add a dump_stack() as a debug
option, to allow us to track when this happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:15 -02:00
Mauro Carvalho Chehab
9af0ef27a0 V4L/DVB (9775): tda8290: fix FM radio
tda8290 were using some random video standard for FM. This results on random
errors. Instead, program tda8290 in expert mode, using a configuration near the
one specified on NXP datasheet for tda8295 (available on their site).

Also, properly display that the device is on radio mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:19 -02:00
Mauro Carvalho Chehab
92d90f1a57 V4L/DVB (9774): tda827x: fix returned frequency
Probably due to a removed code, tda827x were doing some wrong calculus at the
returned frequency. I suspect that the original idea were to return the
programmed divisor converted into frequency again.

However, the current code is sometimes multiplying the programmed frequency by
62500, and, on other cases, like radio, it dividing it by 1000.

Instead of doing such math, let's just store the frequency value as requested by
the caller module.

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:18 -02:00
Mauro Carvalho Chehab
e5218eedae V4L/DVB (9773): tda827x: fix printk message when in FM mode
Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:17 -02:00
Mauro Carvalho Chehab
26d5f3a3fe V4L/DVB (9772): saa7134: Add support for Kworld Plus TV Analog Lite PCI
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this
development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:17 -02:00
Mauro Carvalho Chehab
10f201af1b V4L/DVB (9771): tuner-xc2028: fix a small warning
/home/mauro/v4l-dvb/v4l/tuner-xc2028.c: In function 'xc2028_sleep':
/home/mauro/v4l-dvb/v4l/tuner-xc2028.c:1111: warning: 'return' with no value, in function returning non-void

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:16 -02:00
Mauro Carvalho Chehab
74a89b2ae3 V4L/DVB (9769): tuner-xc2028: powers device of when not used
Since the firmware load is now fast on most boards, better to keep the tuner
off by default. A modprobe parameter were added to keep the old behavior,
to be used by old devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:15 -02:00
Julia Lawall
802971257a V4L/DVB (9638): drivers/media: use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:34 -02:00
Devin Heitmueller
60245e858d V4L/DVB (9629): Add support for the ATI TV Wonder HD 600 USB Remote Control
Add support for the ATI TV Wonder HD 600 USB Remote Control
(required a new keymap)

[mchehab@redhat.com: Fix CodingStyle]
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:34 -02:00
Hans Verkuil
f473bf76c7 V4L/DVB (9503): v4l: remove inode argument from video_usercopy
The inode argument was never used. Removing it from video_usercopy
brings the function pointer type of video_usercopy in line with similar
v4l2 functions, thus simplifying several drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:26 -02:00
Frederic CAND
b84ca9f2a0 V4L/DVB (9497): tda9887/cx88: Adds SECAM/BGH standards
Adds secam bgh support

Signed-off-by: Frederic CAND <frederic.cand@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:25 -02:00
Mauro Carvalho Chehab
b1f88407f3 V4L/DVB (9330): Get rid of inode parameter at v4l_compat_translate_ioctl()
The inode parameter at v4l_compat_translate_ioctl() were just passed over several
places just to keep compatible with fops.ioctl. However, it weren't used anywere.

This patch gets hid of this unused parameter.

Cc: Laurent Pinchart <laurent.pinchart@skynet.be>
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21 14:31:45 -02:00
Hans Verkuil
c6330fb86f V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d
The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now
independent of the minor number. So instead of using the minor field
of the video_device struct one has to use the num field: this always
contains the kernel number of the device node.

I forgot about this when I did the v4l2 core change, so this patch
converts all drivers that use it in one go. Luckily the change is
trivial.

Cc: michael@mihu.de
Cc: mchehab@infradead.org
Cc: corbet@lwn.net
Cc: luca.risolia@studio.unibo.it
Cc: isely@pobox.com
Cc: pe1rxq@amsat.org
Cc: royale@zerezo.com
Cc: mkrufky@linuxtv.org
Cc: stoth@linuxtv.org
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21 14:31:37 -02:00
Jose Alberto Reguero
ca341e4d1b V4L/DVB (9272): mxl5005s: Bug fix stopped DVB-T from working the second time around.
Jose reported:

I am using a Avermedia Volar X with af9015 driver(DVB-T).

The first time you use the card, first call reconfigure with MXL_QAM,
and when tune DVB-T it calls reconfigure with MXL_DVBT. But if you close
the frontend and open again, it calls reconfigure with MXL_QAM, but not
call reconfigure with MXL_DVBT because state->current_mode don't change
(is MXL_DVBT).

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:30:33 -03:00
Darron Broad
953cafc04e V4L/DVB (9268): tuner: add FMD1216MEX tuner
This tuner was already supported by proxy as an FMD1216ME, however,
the MEX uses a different FM Radio IF so this addition is now required.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:29:09 -03:00