ocfs2_block_group_clear_bits will clear bits in block group bitmap.
Once it succeeds but fails in the following step, it will cause block
group bitmap mismatch the corresponding count recorded in dinode.
So rollback the cleared bits if error occurs.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ocfs2_get_system_file_inode fails, it is obscure to set the return
value to -EEXIST. So change it to -ENOENT.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the namelen is 20 and name only has actual length 16, it will fail in
ocfs2_find_entry because of mismatch. So use actual name length when find
entry.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code at the "out" label assumes that "default_acl" and "acl" are NULL,
but actually the pointers can be NULL, unitialized, or freed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_reserve_local_alloc_bits, it calls ocfs2_error if local alloc
inode bitmap used bits mismatch, but the log mistakes it as free bits.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_direct_IO_write, we use ocfs2_zero_extend to zero allocated
clusters in case of cluster not aligned. But ocfs2_zero_extend uses page
cache, this may happen that it clears the data which blockdev_direct_IO
has already written.
We should use blkdev_issue_zeroout instead of ocfs2_zero_extend during
direct IO.
So fix this issue by introducing ocfs2_direct_IO_zero_extend and
ocfs2_direct_IO_extend_no_holes.
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Tested-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need take inode lock when calling ocfs2_get_clusters.
And use GFP_NOFS instead of GFP_KERNEL.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since di_bh won't be used when zeroing extend, set it to NULL.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only when direct IO succeeds we need consider zeroing out in case of
cluster not aligned.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an off-by-one when attempting to avoid an msleep() on the final loop
iteration.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kfree() was called by user_cluster_connect() even if a previous call of
the kzalloc() function failed.
Return from this implementation directly after failure detection.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__ocfs2_free_slot_info() was called by ocfs2_init_slot_info() even if a
call of the kzalloc() function failed.
Return from this implementation directly after corresponding
exception handling.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_free_path() was called by ocfs2_merge_rec_right() even if a call of
the ocfs2_get_right_path() function failed.
Return from this implementation directly after corresponding
exception handling.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_free_path() was called by ocfs2_merge_rec_left() even if a call of
the ocfs2_get_left_path() function failed.
Return from this implementation directly after corresponding
exception handling.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_free_path() was called in some cases by
ocfs2_figure_merge_contig_type() during error handling even if the passed
variables "left_path" and "right_path" contained still a null pointer.
Corresponding implementation details could be improved by adjustments for
jump labels according to the current Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kfree() was called in a few cases by ocfs2_convert_inline_data_to_extents()
during error handling even if the passed variable "pages" contained a
null pointer.
* Return from this implementation directly after failure detection for
the function call "kcalloc".
* Corresponding details could be improved by the introduction of another
jump label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kfree(), ocfs2_free_path() and __ocfs2_free_slot_info() test whether their
argument is NULL and then return immediately. Thus the test around their
calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mempools created for slab caches should use mempool_create_slab_pool().
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dwarf_reg_pool and dwarf_frame_pool are not properly destroyed when
cleaning up the dwarf unwinder. Destroy them with mempool_destroy().
Also mark dwarf_unwinder_cleanup() as __init.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
if()/BUG conversion to BUG_ON must be avoided when there's side effect
in condition. The reason being BUG_ON won't execute the condition when
CONFIG_BUG is not defined.
With inspiration from Bruce Fields.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 61f77eda9b ("mm/hugetlb: reduce arch dependent code around
follow_huge_*") broke follow_huge_pmd() on s390, where pmd and pte
layout differ and using pte_page() on a huge pmd will return wrong
results. Using pmd_page() instead fixes this.
All architectures that were touched by that commit have pmd_page()
defined, so this should not break anything on other architectures.
Fixes: 61f77eda "mm/hugetlb: reduce arch dependent code around follow_huge_*"
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.cz>, Andrea Arcangeli <aarcange@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a list of patches we've accumulated for GFS2 for the current upstream
merge window. Most of the patches fix GFS2 quotas, which were not properly
enforced. There's another that adds me as a GFS2 co-maintainer, and a
couple patches that fix a kernel panic doing splice_write on GFS2 as well
as a few correctness patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVLTjHAAoJENeLYdPf93o7QdsIAIvnyE4HFXct/OjsjNdhkf9o
vY20tnSDfFwySlsGa1ZvI8H8VX5SFzbJgHLFNSuLQqB8L5tN5unlLT+tNyjIGKlp
mW34RU7f7oFFmAxhb+gTUJYY7WhQK0GEvrwcILJxNXvNUhVxufArGwKWO9XWoMcU
rLlwpWQvmMLzgXCLXEUDJXy442Hv78r5b7BSxFwGYjq4ak6MSPqQ38KwPFcq3e5d
gH3IpWIefwPSStV7CpuZwSrPJ344a2GZRVQNboe/K2qhyDiAiOwxHCFz3X8e1u7G
SX+SV6dO4C9MLeovUbLYfFQ1Y8tLtceQpzRDb0cu6UJvLJ3dDl2ZOa9OOMKmk4M=
=l/IT
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window.
Most of the patches fix GFS2 quotas, which were not properly enforced.
There's another that adds me as a GFS2 co-maintainer, and a couple
patches that fix a kernel panic doing splice_write on GFS2 as well as
a few correctness patches"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: fix quota refresh race in do_glock()
gfs2: incorrect check for debugfs returns
gfs2: allow fallocate to max out quotas/fs efficiently
gfs2: allow quota_check and inplace_reserve to return available blocks
gfs2: perform quota checks against allocation parameters
GFS2: Move gfs2_file_splice_write outside of #ifdef
GFS2: Allocate reservation during splice_write
GFS2: gfs2_set_acl(): Cache "no acl" as well
Add myself (Bob Peterson) as a maintainer of GFS2
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vI04
-----END PGP SIGNATURE-----
Merge tag 'jfs-4.1' of git://github.com/kleikamp/linux-shaggy
Pull jfs update from David Kleikamp:
"Not much this time. Just a one-liner format fix"
* tag 'jfs-4.1' of git://github.com/kleikamp/linux-shaggy:
jfs: %pf is only for function pointers
With the recent driver changes, bump the version.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
VFs were being improperly added to the switch's multicast group. The
error stems from the fact that incorrect arguments were passed to the
"update_mc_addr" function. It would seem to be a copy paste error since
the parameters are similar to the "update_uc_addr" function.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When we call update_max_size it does not drop all oversized messages.
This is due to the difficulty in performing this operation, since it is
a FIFO which makes updating anything other than head or tail very
difficult. To fix this, modify validate_msg_size to ensure that we error
out later when trying to transmit the message that could be oversized.
This will generally be a rare condition, as it requires the FIFO to
include a message larger than the max_size negotiated during mailbox
connect. Note that max_size is always smaller than rx.size so it should
be safe to use here.
Also, update the update_max_size function header comment to clearly
indicate that it does not drop all oversized messages, but only those at
the head of the FIFO.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When we forcefully shutdown the mailbox, we then go about resetting max
size to 0, and clearing all messages in the FIFO. Instead, we should
just reset the head pointer so that the FIFO becomes empty, rather than
changing the max size to 0. This helps prevent increment in tx_dropped
counter during mailbox negotiation, which is confusing to viewers of
Linux ethtool statistics output.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The use of dropped doesn't really mean dropped mailbox messages, but
rather specifically messages which were too large to fit in the remote
Rx FIFO. Rename the stat to more clearly indicate what it means.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
A final pull request, I know it's very late but this time I think it's worth a
bit of rush.
The following patchset contains Netfilter/nf_tables updates for net-next, more
specifically concatenation support and dynamic stateful expression
instantiation.
This also comes with a couple of small patches. One to fix the ebtables.h
userspace header and another to get rid of an obsolete example file in tree
that describes a nf_tables expression.
This time, I decided to paste the original descriptions. This will result in a
rather large commit description, but I think these bytes to keep.
Patrick McHardy says:
====================
netfilter: nf_tables: concatenation support
The following patches add support for concatenations, which allow multi
dimensional exact matches in O(1).
The basic idea is to split the data registers, currently consisting of
4 registers of 16 bytes each, into smaller units, 16 registers of 4
bytes each, and making sure each register store always leaves the
full 32 bit in a well defined state, meaning smaller stores will
zero the remaining bits.
Based on that, we can load multiple adjacent registers with different
values, thereby building a concatenated bigger value, and use that
value for set lookups.
Sets are changed to use variable sized extensions for their key and
data values, removing the fixed limit of 16 bytes while saving memory
if less space is needed.
As a side effect, these patches will allow some nice optimizations in
the future, like using jhash2 in nft_hash, removing the masking in
nft_cmp_fast, optimized data comparison using 32 bit word size etc.
These are not done so far however.
The patches are split up as follows:
* the first five patches add length validation to register loads and
stores to make sure we stay within bounds and prepare the validation
functions for the new addressing mode
* the next patches prepare for changing to 32 bit addressing by
introducing a struct nft_regs, which holds the verdict register as
well as the data registers. The verdict members are moved to a new
struct nft_verdict to allow to pull struct nft_data out of the stack.
* the next patches contain preparatory conversions of expressions and
sets to use 32 bit addressing
* the next patch introduces so far unused register conversion helpers
for parsing and dumping register numbers over netlink
* following is the real conversion to 32 bit addressing, consisting of
replacing struct nft_data in struct nft_regs by an array of u32s and
actually translating and validating the new register numbers.
* the final two patches add support for variable sized data items and
variable sized keys / data in set elements
The patches have been verified to work correctly with nft binaries using
both old and new addressing.
====================
Patrick McHardy says:
====================
netfilter: nf_tables: dynamic stateful expression instantiation
The following patches are the grand finale of my nf_tables set work,
using all the building blocks put in place by the previous patches
to support something like iptables hashlimit, but a lot more powerful.
Sets are extended to allow attaching expressions to set elements.
The dynset expression dynamically instantiates these expressions
based on a template when creating new set elements and evaluates
them for all new or updated set members.
In combination with concatenations this effectively creates state
tables for arbitrary combinations of keys, using the existing
expression types to maintain that state. Regular set GC takes care
of purging expired states.
We currently support two different stateful expressions, counter
and limit. Using limit as a template we can express the functionality
of hashlimit, but completely unrestricted in the combination of keys.
Using counter we can perform accounting for arbitrary flows.
The following examples from patch 5/5 show some possibilities.
Userspace syntax is still WIP, especially the listing of state
tables will most likely be seperated from normal set listings
and use a more structured format:
1. Limit the rate of new SSH connections per host, similar to iptables
hashlimit:
flow ip saddr timeout 60s \
limit 10/second \
accept
2. Account network traffic between each set of /24 networks:
flow ip saddr & 255.255.255.0 . ip daddr & 255.255.255.0 \
counter
3. Account traffic to each host per user:
flow skuid . ip daddr \
counter
4. Account traffic for each combination of source address and TCP flags:
flow ip saddr . tcp flags \
counter
The resulting set content after a Xmas-scan look like this:
{
192.168.122.1 . fin | psh | urg : counter packets 1001 bytes 40040,
192.168.122.1 . ack : counter packets 74 bytes 3848,
192.168.122.1 . psh | ack : counter packets 35 bytes 3144
}
In the future the "expressions attached to elements" will be extended
to also support user created non-stateful expressions to allow to
efficiently select beween a set of parameter sets, f.i. a set of log
statements with different prefixes based on the interface, which currently
require one rule each. This will most likely have to wait until the next
kernel version though.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the PF receives a request to update a multicast address for the VF,
it checks the enabled multicast mode first. Fix a bug where the VF tried
to set a multicast address before requesting the required xcast mode.
This ensures the multicast addresses are honored as long as the xcast
mode was allowed.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since the service task handles varying work that doesn't all require the
interface to be up, launch the service timer immediately. This ensures
that we continually check the mailbox, as well as handle other tasks
while the device is down.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The header comment included a miscopy of a C-code line, and also
mis-used Rx FIFO when it clearly meant Tx FIFO
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add a header comment explaining why we have the somewhat crazy mailbox
flow. This flow is necessary as it prevents the PF<->SM mailbox from
being flooded by the VF messages, which normally trigger a message to
the PF. This helps prevent the case where we see a PF mailbox timeout.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since we already schedule the service task, we can just wait for this
task to handle the mailbox events from the VF. This reduces some complex
code flow, and makes it so we have a single path for handling the VF
messages. There is a possibility that we have a slight delay in handling
VF messages, but it should be minimal.
The result of tx_complete and !rx_ready is insufficient to determine
whether we need to process the mailbox. There is a possible race
condition whereby the VF fills up the mbmem for us, but we have already
recently processed the mailboxes in the interrupt. During this time,
the interrupt is disabled. Thus, our Rx FIFO is empty, but the mbmem now
has data in it. Since we continually check whether Rx FIFO is empty, we
then never call process. This results in the possibility to prevent PF
from handling the VF mailbox messages.
Instead, just call process every time, despite the fact that we may or
may not have anything to process for the VF. There should be minimal
overhead for doing this, and it resolves an issue where the VF never
comes up due to never getting response for its SET_LPORT_STATE message.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since we run the watchdog periodically, which might take a while and
potentially monopolize the system default workqueue, create our own
separate work queue. This also helps reduce and stabilize latency
between scheduling the work in our interrupt and actually performing
the work. Still use a timer for the regular scheduled interval but
queue the work onto its own work queue.
It seemed overkill to create a single workqueue per interface, so we
just spawn a single work queue for all interfaces upon driver load. For
this reason, use a multi-threaded workqueue with one thread per
processor, rather than single threaded queue.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When returning virtualization queues from the VF back to the PF, do not
retain the VF rate limiter.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Todd Russell <todd.a.russell@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Named it tx_hang_count to differentiate it from tx_hwtstamp_timeout.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We were incrementing the tx_timeout_count for both the Tx hang
and then for all reset flows. Instead, we should only increment
tx_timeout_count in the Tx hang path, so that our Tx hang counter
does not increment when it was not caused by a Tx hang.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since we already print this message when a reset is requested via the
RESET_REQUESTED flag, we do not need to print it before setting the
flag.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch resolves an issue with ethtool stats displaying useless
values on the VF, because some stats simply have no meaning to the VF.
Resolve this by splitting these out into PF_STATS and only showing them
if we aren't the VF.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Even though it shouldn't strictly matter, don't count queue stats higher
than the max_queues value stored for this mac. This ensures that we
don't attempt to check queues which don't belong to use in VFs. This
shouldn't be a visible change, as the VFs should see zero for queues
which don't belong to them.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently, we show statistics for all 128 queues, even though we don't
necessarily have that many queues available especially in the VF case.
Instead, use the hw->mac.max_queues value, which tells us how many
queues we actually have, rather than the space for the rings we
allocated. In this way, we prevent dumping statistics that are useless
on the VF.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Previously, the user was not allowed to create a VLAN interface on top
of the switch default vid.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull vfs update from Al Viro:
"Part one:
- struct filename-related cleanups
- saner iov_iter_init() replacements (and switching the syscalls to
use of those)
- ntfs switch to ->write_iter() (Anton)
- aio cleanups and splitting iocb into common and async parts
(Christoph)
- assorted fixes (me, bfields, Andrew Elble)
There's a lot more, including the completion of switchover to
->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
race fixes, etc, but that goes after #for-davem merge. David has
pulled it, and once it's in I'll send the next vfs pull request"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
sg_start_req(): use import_iovec()
sg_start_req(): make sure that there's not too many elements in iovec
blk_rq_map_user(): use import_single_range()
sg_io(): use import_iovec()
process_vm_access: switch to {compat_,}import_iovec()
switch keyctl_instantiate_key_common() to iov_iter
switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
vmsplice_to_user(): switch to import_iovec()
kill aio_setup_single_vector()
aio: simplify arguments of aio_setup_..._rw()
aio: lift iov_iter_init() into aio_setup_..._rw()
lift iov_iter into {compat_,}do_readv_writev()
NFS: fix BUG() crash in notify_change() with patch to chown_common()
dcache: return -ESTALE not -EBUSY on distributed fs race
NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
VFS: Add iov_iter_fault_in_multipages_readable()
drop bogus check in file_open_root()
switch security_inode_getattr() to struct path *
constify tomoyo_realpath_from_path()
...
The were several functions which had parameters which were never or
sometimes used in functions. To resolve possible compiler warnings,
use __always_unused or __maybe_unused kernel macros to resolve.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change adds a function called "fm10k_netpoll" that's used to define
"ndo_poll_controller" in "fm10k_netdev_ops". This is required to enable
support for "netconsole" in fm10k.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently, the VFs do not read the default VLAN during initialization,
so they will not be able to indicate untagged frames properly.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Corrected a spelling mistake that was found over time.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
