Commit Graph

14 Commits

Author SHA1 Message Date
Kumar Gala
b57cee20a5 powerpc/embedded6xx: Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26 20:02:47 -06:00
Kumar Gala
ea37194d68 powerpc: Updated Freescale PPC related defconfigs
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-08 12:40:54 -06:00
Timur Tabi
dbe216319f powerpc: disable CHRP and PMAC support in various defconfigs
Because CHRP and PMAC are by default enabled, several non-CHRP and non-PMAC
PowerPC defconfigs will have these Kconfig options set erroneously.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
Timur Tabi
3396c72b92 powerpc: Remove CHRP and PMAC support from FSL defconfigs
Fix various defconfigs for Freescale chip based boards to remove
CONFIG_PPC_PMAC or CONFIG_PPC_CHRP which crept in due to those
being default y

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-07 14:26:20 +11:00
Kumar Gala
2bb2e1db90 powerpc: Update defconfigs for FSL PPC boards
Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-21 07:23:03 -05:00
Kumar Gala
70b3ec3e52 [POWERPC] Updated Freescale PPC defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 09:12:22 -05:00
Kumar Gala
eff2f1ec37 [POWERPC] Update some defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-24 08:56:06 -05:00
Scott Wood
e8b5f43f7b [POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC
This was recently made configurable, and needs to be set for these boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-13 22:44:49 -06:00
Paul Mackerras
43af66e135 [POWERPC] Update defconfigs
This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:54:02 +11:00
Anton Blanchard
309a109255 [POWERPC] Enable SLUB in *_defconfig
When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds.  It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency.  While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow.  Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Scott Wood
e00c5498a2 [POWERPC] mpc82xx: Update mpc8272ads, and factor out PCI and reset.
1. PCI and reset are factored out into pq2.c.  I renamed them from m82xx
to pq2 because they won't work on the Integrated Host Processor line of
82xx chips (i.e. 8240, 8245, and such).

2. The PCI PIC, which is nominally board-specific, is used on multiple
boards, and thus is used into pq2ads-pci-pic.c.

3. The new CPM binding is used.

4. General cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:44 -05:00
Kumar Gala
5cc44e086d [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-29 16:47:38 -05:00
Kumar Gala
795bb15e07 [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-02 00:04:36 -05:00
Vitaly Bordug
c4cbfd64f9 [POWERPC] mpc8272ads: defconfig
Default config file for mpc8272ads (powerpc port).Though relevant bits went
in, it is required to keep proper default configuration for the target,
which seems to be missed initially.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00