Commit Graph

2688 Commits

Author SHA1 Message Date
Linus Torvalds
8d5eb435c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
2009-10-29 09:22:34 -07:00
Mikulas Patocka
9bd7496f5d ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
CMD646 corrupts data on concurrent transfers on both channels when IDE SSD is
connected to one of the channels.

Setup that demonstrates this hardware bug: Ultra 5, onboard CMD646, rev 3.
/dev/hda is 8GB Seagate ST38410A in MWDMA2
/dev/hdd is 32GB SSD SiliconHardDisk in MWDMA2

- When reading /dev/hdd (for example with dd or fsck), reads from /dev/hda
  are corrupted, there are twiddled single bits 1->0 and some full 32-bit
  words corrupted, sometimes commands fail (which switches /dev/hda to
  PIO mode but the corruptions happen even in PIO).
- Reads from /dev/hdd don't seem to be corrupted (i.e. fsck passes fine).
- When I connected normal rotating harddisk to /dev/hdd, there was no
  corruption, so the corruption is something specific to SSD.
- I tried the same setup on a PCI card with CMD649 and saw no corruption.

This patch serializes the operation for CMD646 and 643 (I didn't test
CMD643 but it may have the same hw bug too because it's earlier design).
CMD649 is good. I don't know anything about CMD 648.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29 03:02:06 -07:00
Shane Huang
5deab53665 ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2
This patch renames the code name SB900 into Hudson-2

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-16 06:21:20 -04:00
Linus Torvalds
df87f344ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
  sis5513: fix PIO setup for ATAPI devices
2009-10-08 11:59:06 -07:00
Bartlomiej Zolnierkiewicz
032665a26f Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
This reverts commit 24df31acaf.

The root cause of reported system hangs was (now fixed) sis5513 bug
and not "ide: try to use PIO Mode 0 during probe if possible" change
(commit 6029336426) so the revert was
incorrect (it simply replaced one regression with the other one).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:18 -07:00
Bartlomiej Zolnierkiewicz
e13ee546bb sis5513: fix PIO setup for ATAPI devices
Clear prefetch setting before potentially (re-)enabling it in
config_drive_art_rwp() so the transition of the device type on
the port from ATA to ATAPI (i.e. during warm-plug operation)
is handled correctly.

This is a really old bug (it probably goes back to very early
days of the driver) but it was only affecting warm-plug operation
until the recent "ide: try to use PIO Mode 0 during probe if
possible" change (commit 6029336426).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tested-by: David Fries <david@fries.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 04:07:17 -07:00
Linus Torvalds
0eca52a927 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: try to use PIO Mode 0 during probe if possible"
  ide: use printk_once
2009-10-05 14:39:22 -07:00
David S. Miller
24df31acaf Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit 6029336426.

Based upon a report by David Fries, wherein his system hangs
on bootup with sis5513 controller, right after the CDROM
is registered by ide-cd.c and the TOC is first read.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04 21:00:17 -07:00
Linus Torvalds
c11f6c8258 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
  ACPI: don't pass handle for fixed hardware notifications
  ACPI: remove null pointer checks in deferred execution path
  ACPI: simplify deferred execution path
  acerhdf: additional BIOS versions
  acerhdf: convert to dev_pm_ops
  acerhdf: fix fan control for AOA150 model
  thermal: add missing Kconfig dependency
  acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
  hp-wmi: fix rfkill memory leak on unload
  ACPI: remove unnecessary #ifdef CONFIG_DMI
  ACPI: linux/acpi.h should not include linux/dmi.h
  hwmon driver for ACPI 4.0 power meters
  topstar-laptop: add new driver for hotkeys support on Topstar N01
  thinkpad_acpi: fix rfkill memory leak on unload
  thinkpad-acpi: report brightness events when required
  thinkpad-acpi: don't poll by default any of the reserved hotkeys
  thinkpad-acpi: Fix procfs hotkey reset command
  thinkpad-acpi: deprecate hotkey_bios_mask
  thinkpad-acpi: hotkey poll fixes
  thinkpad-acpi: be more strict when detecting a ThinkPad
  ...
2009-09-23 09:32:11 -07:00
Marcin Slusarz
01f1afaf7b ide: use printk_once
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-22 16:29:00 -07:00
Linus Torvalds
342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Alexey Dobriyan
83d5cde47d const: make block_device_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
Joe Perches
a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00
Len Brown
985f38781d Merge branch 'acpica' into release 2009-09-19 01:45:22 -04:00
Linus Torvalds
0cb583fd28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  ide: fixup for fujitsu disk
  ide: convert to ->proc_fops
  at91_ide: remove headers specific for at91sam9263
  IDE: palm_bk3710: convert clock usage after clkdev conversion
  ide: fix races in handling of user-space SET XFER commands
  ide: allow ide_dev_read_id() to be called from the IRQ context
  ide: ide-taskfile.c fix style problems
  drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  ide-tape: fix handling of postponed rqs
  ide-tape: convert to ide_debug_log macro
  ide-tape: fix debug call
  ide: Fix annoying warning in ide_pio_bytes().
  IDE: Save a call to PageHighMem()
2009-09-15 10:01:16 -07:00
Wu Zhangjin
a2d10568fd ide: fixup for fujitsu disk
This patch will fix the following problem on Yeeloong netbook with
fujitsu disk.

irq 14: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[<ffffffff8020d438>] dump_stack+0x8/0x40
[<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4
[<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c
[<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134
[<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0
[<ffffffff8020041c>] ret_from_irq+0x0/0x4
[<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0
[<ffffffff8026f794>] swsusp_free+0xb0/0x14c
[<ffffffff8026ec08>] hibernate+0x198/0x218
[<ffffffff8026cfa8>] state_store+0x90/0x138
[<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194
[<ffffffff802c94fc>] vfs_write+0xb8/0x180
[<ffffffff802c96b8>] SyS_write+0x50/0x98
[<ffffffff80203fd8>] handle_sys+0x158/0x174

handlers:
[<ffffffff80429670>] (ide_intr+0x0/0x300)
Disabling IRQ #14

References:

1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of
git://dev.lemote.com/linux_loongson.git
2. 8bc1e5aa06 (ide: respect quirk_drives[]
list on all controllers)

Signed-off-by: Yan Hua <yanh@lemote.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 01:36:25 -07:00
Linus Torvalds
86373435d2 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
  pata_rz1000: use printk_once
  ahci: kill @force_restart and refine CLO for ahci_kick_engine()
  pata_cs5535: add pci id for AMD based CS5535 controllers
  ahci: Add AMD SB900 SATA/IDE controller device IDs
  drivers/ata: use resource_size
  sata_fsl: Defer non-ncq commands when ncq commands active
  libata: add SATA PMP revision information for spec 1.2
  libata: fix off-by-one error in ata_tf_read_block()
  ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  dmi: extend dmi_get_year() to dmi_get_date()
  dmi: fix date handling in dmi_get_year()
  libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
  sata_sis: convert to slave_link
  sata_sil24: always set protocol override for non-ATAPI data commands
  libata: Export AHCI capabilities
  libata: Delegate nonrot flag setting to SCSI
  [libata] Add pata_rdc driver for RDC ATA devices
  drivers/ata: Remove unnecessary semicolons
  libata: remove spindown skipping and warning
  ...
2009-09-11 16:38:33 -07:00
Shane Huang
e2dd90b1ad ahci: Add AMD SB900 SATA/IDE controller device IDs
Add AMD SB900 SATA/IDE controller device IDs.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-11 02:31:27 -04:00
Alexey Dobriyan
6d703a81ad ide: convert to ->proc_fops
->read_proc, ->write_proc are going away, ->proc_fops should be used instead.

The only tricky place is IDENTIFY handling: if for some reason
taskfile_lib_get_identify() fails, buffer _is_ changed and at least
first byte is overwritten. Emulate old behaviour with returning
that first byte to userspace and reporting length=1 despite overall -E.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:52:57 -07:00
Bob Moore
15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Sergey Matyukevich
76fbebfbb5 at91_ide: remove headers specific for at91sam9263
This driver requires only static memory controller definitions and macroses
contained in generic header at91sam9_smc.h.

Those extra headers are misleading since this driver also works fine for
at91sam9260 SoC: tests were performed on afeb9260 board.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:55:09 -07:00
Kevin Hilman
468b5ef8a8 IDE: palm_bk3710: convert clock usage after clkdev conversion
DaVinci core code has converted to the new clkdev API so
clock name strings are not needed.  Instead, just the a
'struct device' pointer is needed.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 18:55:08 -07:00
Wolfram Sang
c9a2bfd1f0 pcmcia: add CNF-CDROM-ID for ide
Fixes this report:
http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/

Reported-by: John McGrath <john@john-mcgrath.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 13:09:32 -07:00
Bartlomiej Zolnierkiewicz
665d66e8fa ide: fix races in handling of user-space SET XFER commands
* Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag.

* Update ide_finish_cmd() to set xfer / re-read id if the new flag is set.

* Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed)
  and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag.

* Remove no longer needed disable_irq_nosync() + enable_irq() from
  ide_config_drive_speed().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:43:00 -07:00
Bartlomiej Zolnierkiewicz
fa56d4cb40 ide: allow ide_dev_read_id() to be called from the IRQ context
* Un-static __ide_wait_stat().

* Allow ide_dev_read_id() helper to be called from the IRQ context by
  adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed.

* Switch ide_driveid_update() to set irq_ctx flag.

This change is needed for the consecutive patch which fixes races in
handling of user-space SET XFER commands but for improved bisectability
and clarity it is better to do it in a separate patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Jaswinder Singh Rajput
2d5abcedeb ide: ide-taskfile.c fix style problems
Fix trivial style problems:

WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: space prohibited between function name and open parenthesis '('
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
ERROR: do not use C99 // comments X 2
ERROR: trailing statements should be on next line
ERROR: trailing whitespace
ERROR: switch and case should be at the same indent
WARNING: line over 80 characters

total: 5 errors, 4 warnings

Also removed dead code

Also used pr_err() to avoid line breaks

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:59 -07:00
Julia Lawall
72db37b2c9 drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:58 -07:00
Borislav Petkov
6f3848ac23 ide-tape: fix handling of postponed rqs
ide-tape used to hit

[   58.614854] ide-tape: ht0: BUG: Two DSC requests queued!

due to the fact that another rq was being issued while the driver was
waiting for DSC to get set for the device executing ATAPI commands which
set the DSC to 1 to indicate completion.

Here's a sample output of that case:

issue REZERO_UNIT

[  143.088505] ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x01
[  143.095122] ide: Enter ide_pc_intr - interrupt handler
[  143.096118] ide: Packet command completed, 0 bytes transferred
[  143.106319] ide-tape: ide_tape_callback: cmd: 0x1, dsc: 1, err: 0
[  143.112601] ide-tape: idetape_postpone_request: cmd: 0x1, dsc_poll_freq: 2000

we stall the ide-tape queue here waiting for DSC

[  143.119936] ide-tape: ide_tape_read_position: enter
[  145.119019] ide-tape: idetape_do_request: sector: 4294967295, nr_sectors: 0

and issue the new READ_POSITION rq and hit the check.

[  145.126247] ide-tape: ht0: BUG: Two DSC requests queued!
[  145.131748] ide-tape: ide_tape_read_position: BOP - No
[  145.137059] ide-tape: ide_tape_read_position: EOP - No

Also, ->postponed_rq used to point to that postponed request. To make
things worse, in certain circumstances the rq it was pointing to got
replaced unterneath it by swiftly reusing the same rq from the mempool
of the block layer practically confusing stuff even more.

However, we don't need to keep a pointer to that rq but simply wait for
DSC to be set first before issuing the follow-up request in the drive's
queue. In order to do that, we make idetape_do_request() first check the
DSC and if not set, we stall the drive queue giving the other device on
that IDE channel a chance.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:57 -07:00
Borislav Petkov
e972d7027c ide-tape: convert to ide_debug_log macro
Remove tape->debug_mask and use drive->debug_mask instead.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:57 -07:00
Mark de Wever
37bbe084d1 ide-tape: fix debug call
This error only occurs when IDETAPE_DEBUG_LOG is enabled.

Signed-off-by: Mark de Wever <koraq@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:56 -07:00
David S. Miller
7fa350b475 ide: Fix annoying warning in ide_pio_bytes().
GCC can't see that flags is only set and used when PageHighmem() is
true.

Inspired by a patch from Jean Delvare.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:56 -07:00
Jean Delvare
a907905219 IDE: Save a call to PageHighMem()
PageHighMem() isn't cheap so avoid calling it twice on the same page.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07 10:42:55 -07:00
Michael Buesch
2fc2111c27 ide-tape: Don't leak kernel stack information
Don't leak kernel stack information through uninitialized structure members.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 20:36:25 -07:00
Maxime Bizon
bc146d23d1 ide: fix memory leak when flush command is issued
I'm using ide on 2.6.30.1 with xfs filesystem. I noticed a kernel memory
leak after writing lots of data, the kmalloc-96 slab cache keeps
growing. It seems the struct ide_cmd kmalloced by idedisk_prepare_flush
is never kfreed.

Commit a09485df9c ("ide: move request
type specific code from ide_end_drive_cmd() to callers (v3)") and
f505d49ffd ("ide: fix barriers support")
cause this regression, cmd->rq must now be set for ide_complete_cmd to
honor the IDE_TFLAG_DYN flag.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-21 20:23:46 -07:00
David S. Miller
3503e0acbf Revert "ide: improve handling of Power Management requests"
This reverts commit a1317f714a.
2009-07-06 12:39:27 -07:00
Christian Engelmayer
e18ed145c7 ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY
This patch fixes a memory overrun in function ide_get_identity_ioctl() which
chooses the size of a memory buffer depending on the ioctl command that led
to the function call, however, passes that buffer to a function which needs the
buffer size to be always chosen unconditionally.

Due to conditional compilation the memory overrun can only happen on big endian
machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage
of ioctl HDIO_GET_IDENTITY is safe.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29 19:31:41 -07:00
Bartlomiej Zolnierkiewicz
2bf427b25b ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
commit 2f0d0fd2a6 ("ide-acpi: cleanup
do_drive_get_GTF()") didn't account for the lack of hwif->acpidata
check in generic_ide_suspend() [ indirect user of do_drive_get_GTF()
through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI
support is enabled but ACPI data is unavailable.

Fix it by adding ide_port_acpi() helper for checking if port needs
ACPI handling and cleaning generic_ide_{suspend,resume}() to use it
instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI
helpers (this should help in preventing similar bugs in the future).

While at it:
- kill superfluous debugging printks in ide_acpi_{get,push}_timing()

Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr>
Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-29 19:20:42 -07:00
Borislav Petkov
9c72ebef5a ide-cd: handle fragmented packet commands gracefully
There are some devices in the wild that clear the DRQ bit during the
last word of a packet command and therefore could use a "second chance"
for that last word of data to be xferred instead of simply failing the
request. Do that by attempting to suck in those last bytes in PIO mode.

In addition, the ATA_ERR bit has to be cleared for we cannot be sure the
data is valid otherwise.

See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26 11:22:37 -07:00
Bartlomiej Zolnierkiewicz
5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz
789547508f ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests
Such requests should be failed with -EIO (like all other requests
in this function) instead of being completed successfully.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:14 -07:00
David S. Miller
d7e2f36d9a ide cs5520: Initialize second port's interrupt number.
In 86ccf37c6a the driver was modified
to deal with the removal of the pciirq argument to ide_pci_setup_ports().

But in the conversion only the first port's IRQ gets setup.

Inspired by a patch by Bartlomiej Zolnierkiewicz., and with help from
Alan Cox.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 02:36:17 -07:00
Bartlomiej Zolnierkiewicz
a1317f714a ide: improve handling of Power Management requests
Make hwif->rq point to PM request during PM sequence and do not allow
any other types of requests to slip in (the old comment was never correct
as there should be no such requests generated during PM sequence).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:33 -07:00
Bartlomiej Zolnierkiewicz
ba9413bd28 ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:32 -07:00
Bartlomiej Zolnierkiewicz
346c17a6cf ide: relax DMA info validity checking
There are some broken devices that report multiple DMA xfer modes
enabled at once (ATA spec doesn't allow it) but otherwise work fine
with DMA so just delete ide_id_dma_bug().

[ As discovered by detective work by Frans and Bart, due to how
  handling of the ID block was handled before commit c419993
  ("ide-iops: only clear DMA words on setting DMA mode") this
  check was always seeing zeros in the fields or other similar
  garbage.  Therefore this check wasn't actually checking anything.
  Now that the tests actually check the real bits, all we see are
  devices that trigger the check yet work perfectly fine, therefore
  killing this useless check is the best thing to do. -DaveM ]

Reported-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:32 -07:00
Frans Pop
d9ae62433e ide-cd: Improve "weird block size" error message
Currently the error gets repeated too frequently, for example each
time HAL polls the device when a disc is present. Avoid that by using
printk_once instead of printk.

Also join the error and corrective action messages into a single line.

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:31 -07:00
David S. Miller
af054ed001 ide-cd: Don't warn on bogus block size unless it actually matters.
Frans Pop reported that his CDROM drive reports a blocksize of 2352,
and this causes new warnings due to commit
e8e7b9eb11 ("ide-cd: fix oops when using
growisofs").

What we're trying to do is make sure that "blocklen >> SECTOR_BITS"
is something the block layer won't choke on.

And for Frans' case "2352 >> SECTOR_BITS" is equal to
"2048 >> SECTOR_BITS", and thats "4".

So warning in this case gives no real benefit.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
Bartlomiej Zolnierkiewicz
ffc36c7610 ide: fix handling of unexpected IRQs vs request_irq()
Add ide_host_enable_irqs() helper and use it in ide_host_register()
before registering ports.  Then remove no longer needed IRQ unmasking
from in init_irq().

This should fix the problem with "screaming" shared IRQ on the first
port (after request_irq() call while we have the unexpected IRQ pending
on the second port) which was uncovered by my rework of the serialized
interfaces support.

Reported-by: Frans Pop <elendil@planet.nl>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24 00:32:30 -07:00
David S. Miller
e01698aed0 ide cmd64x: Remove serialize setting.
This begins to fix regressions reported by Frans Pop on his Ultra-10.

There are still some funnies left that we are investigating.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21 22:48:03 -07:00
Linus Torvalds
e6423407d0 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...
2009-06-20 10:11:11 -07:00
Rainer Weikusat
39c58f37a1 ide-cd: prevent null pointer deref via cdrom_newpc_intr
With 2.6.30, the error handling code in cdrom_newpc_intr was changed
to deal with partial request failures by normally completing the 'good'
parts of a request and only 'error' the last (and presumably,
incompletely transferred) bio associated with a particular
request. In order to do this, ide_complete_rq is called over
ide_cd_error_cmd() to partially complete the rq. The block layer
does partial completion only for requests with bio's and if the
rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is
completed as a whole and the drive->hwif->rq pointer set to NULL
afterwards. When calling ide_complete_rq again to report
the error, this null pointer is derefenced, resulting in a kernel
crash.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-20 12:22:47 +02:00