Commit Graph

196 Commits

Author SHA1 Message Date
Andy Gospodarek
ce39a800ea bonding: fix panic when taking bond interface down before removing module
A panic was discovered with bonding when using mode 5 or 6 and trying to
remove the slaves from the bond after the interface was taken down.
When calling 'ifconfig bond0 down' the following happens:

    bond_close()
        bond_alb_deinitialize()
            tlb_deinitialize()
		kfree(bond_info->tx_hashtbl)
                bond_info->tx_hashtbl = NULL

Unfortunately if there are still slaves in the bond, when removing the
module the following happens:

    bonding_exit()
        bond_free_all()
            bond_release_all()
                bond_alb_deinit_slave()
                    tlb_clear_slave()
                        tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl
			u32 next_index = tx_hash_table[index].next

As you might guess we panic when trying to access a few entries into the
table that no longer exists.

I experimented with several options (like moving the calls to
tlb_deinitialize somewhere else), but it really makes the most sense to
be part of the bond_close routine.  It also didn't seem logical move
tlb_clear_slave around too much, so the simplest option seems to add a
check in tlb_clear_slave to make sure we haven't already wiped the
tx_hashtbl away before searching for all the non-existent hash-table
entries that used to point to the slave as the output interface.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:46:12 -04:00
Jay Vosburgh
a434e43f3d bonding: Clean up resource leaks
This patch reworks the resource free logic performed at the time
a bonding device is released.  This (a) closes two resource leaks, one
for workqueues and one for multicast lists, and (b) improves commonality
of code between the "destroy one" and "destroy all" paths by performing
final free activity via destructor instead of explicitly (and differently)
in each path.

"Sean E. Millichamp" <sean@bruenor.org> reported the workqueue
leak, and included a different patch.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:46:04 -04:00
Jay Vosburgh
fba4acda35 bonding: fix miimon failure counter
During the rework of the mii monitor for:

  commit f0c76d6177
  Author: Jay Vosburgh <fubar@us.ibm.com>
  Date:   Wed Jul 2 18:21:58 2008 -0700

    bonding: refactor mii monitor

I left out the increment of the link failure counter.  This
patch corrects that omission.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:45:51 -04:00
Herbert Xu
b63365a2d6 net: Fix disjunct computation of netdev features
My change

    commit e2a6b85247
    net: Enable TSO if supported by at least one device

didn't do what was intended because the netdev_compute_features
function was designed for conjunctions.  So what happened was that
it would simply take the TSO status of the last constituent device.

This patch extends it to support both conjunctions and disjunctions
under the new name of netdev_increment_features.

It also adds a new function netdev_fix_features which does the
sanity checking that usually occurs upon registration.  This ensures
that the computation doesn't result in an illegal combination
since this checking is absent when the change is initiated via
ethtool.

The two users of netdev_compute_features have been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 01:11:29 -07:00
Ben Dooks
b22596726b drivers/net/bonding: sparse fixes for exported tables
The following sparse warnings are being generated
because bonding.h is missing definitons for items
declared in bond_main.c but also used in bond_sysfs.h

Also export bond_dev_list as this is also declared
in bond_main but used elsewhere in drivers/net/bonding.

bond_main.c:105:20: warning: symbol 'bonding_defaults' was not declared. Should it be static?
bond_main.c:148:1: warning: symbol 'bond_dev_list' was not declared. Should it be static?
bond_main.c:162:22: warning: symbol 'bond_lacp_tbl' was not declared. Should it be static?
bond_main.c:168:22: warning: symbol 'bond_mode_tbl' was not declared. Should it be static?
bond_main.c:179:22: warning: symbol 'xmit_hashtype_tbl' was not declared. Should it be static?
bond_main.c:186:22: warning: symbol 'arp_validate_tbl' was not declared. Should it be static?
bond_main.c:194:22: warning: symbol 'fail_over_mac_tbl' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 22:12:57 -04:00
Stephen Hemminger
fa53ebac42 bonding: add more ethtool support
This patch allows reporting the link, checksum, and feature settings
of bonded device by using generic hooks.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:02 -04:00
Harvey Harrison
b39d66a81f drivers/net: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:00 -04:00
Vlad Yasevich
2d1ea19da0 bonding: Do not tx-balance some IPv6 packets on ALB/TLB bonds
IPv6 all-node-multicasts and DAD probes should not be tx-balanced
on ALB/TLB bonds.  The all-node-multicast is an equivalent to IPv4
broadcasts.  DAD probes have to be sent only on the primary so that
we don't get false-positive detections.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:49:01 -04:00
Brian Haley
f14c4e4e36 bonding: change some __constant_htons() to htons()
Resending since I didn't see any responses from the first try.

Change __constant_htons() to htons() in the bonding driver, it should
only be used for initializers.

-Brian

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 10:03:07 -04:00
Moni Shoua
db018a5f49 bonding: Don't destroy bonding master when removing slave via sysfs
It is wrong to destroy a bonding master from a context that uses the sysfs
of that bond. When last IPoIB slave is unenslaved from by writing to a
sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves)
the driver tries to destroy the bond. This is wrong and can lead to a
lockup or a crash.  This fix lets the bonding master stay and relies on
the user to destroy the bonding master if necessary (i.e. before module
ib_ipoib is unloaded)

This patch affects only bonds of IPoIB slaves. Ethernet slaves stay
unaffected.

Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:56 -04:00
Jay Vosburgh
f0c76d6177 bonding: refactor mii monitor
Refactor mii monitor.  As with the previous ARP monitor refactor,
the motivation for this is to handle locking rationally (in this case,
removing conditional locking) and generally clean up the code.

	This patch breaks up the monolithic mii monitor into two phases:
an inspection phase, followed by an optional commit phase.  The commit phase
is the only portion that requires RTNL or makes changes to state, and is
only called when inspection finds something to change.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:53 -04:00
David S. Miller
cf508b1211 netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep.
The new address list lock needs to handle the same device layering
issues that the _xmit_lock one does.

This integrates work done by Patrick McHardy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 14:16:42 -07:00
David S. Miller
e8a0464cc9 netdev: Allocate multiple queues for TX.
alloc_netdev_mq() now allocates an array of netdev_queue
structures for TX, based upon the queue_count argument.

Furthermore, all accesses to the TX queues are now vectored
through the netdev_get_tx_queue() and netdev_for_each_tx_queue()
interfaces.  This makes it easy to grep the tree for all
things that want to get to a TX queue of a net device.

Problem spots which are not really multiqueue aware yet, and
only work with one queue, can easily be spotted by grepping
for all netdev_get_tx_queue() calls that pass in a zero index.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 19:21:00 -07:00
David S. Miller
b9e4085768 netdev: Do not use TX lock to protect address lists.
Now that we have a specific lock to protect the network
device unicast and multicast lists, remove extraneous
grabs of the TX lock in cases where the code only needs
address list protection.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 00:15:08 -07:00
David S. Miller
e308a5d806 netdev: Add netdev->addr_list_lock protection.
Add netif_addr_{lock,unlock}{,_bh}() helpers.

Use them to protect operations that operate on or read
the network device unicast and multicast address lists.

Also use them in cases where the code simply wants to
block calls into the driver's ->set_rx_mode() and
->set_multicast_list() methods.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 00:13:44 -07:00
Wang Chen
7e1a1ac1fb bonding: Check return of dev_set_promiscuity/allmulti
dev_set_promiscuity/allmulti might overflow.
Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes
dev_set_promiscuity/allmulti return error number if overflow happened.

In bond_alb and bond_main, we check all positive increment for promiscuity
and allmulti to get error return.
But there are still two problems left.
1. Some code path has no mechanism to signal errors upstream.
2. If there are multi slaves, it's hard to tell which slaves increment
   promisc/allmulti successfully and which failed.
So I left these problems to be FIXME.
Fortunately, the overflow is very rare case.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14 20:51:36 -07:00
David S. Miller
c773e847ea netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.
Accesses are mostly structured such that when there are multiple TX
queues the code transformations will be a little bit simpler.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08 23:13:53 -07:00
Jay Vosburgh
b8a9787edd bonding: Allow setting max_bonds to zero
Permit bonding to function rationally if max_bonds is set to
zero.  This will load the module, but create no master devices (which can
be created via sysfs).

	Requires some change to bond_create_sysfs; currently, the
netdev sysfs directory is determined from the first bonding device created,
but this is no longer possible.  Instead, an interface from net/core is
created to create and destroy files in net_class.

	Based on a patch submitted by Phil Oester <kernel@linuxaces.com>.
Modified by Jay Vosburgh to fix the sysfs issue mentioned above and to
update the documentation.

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18 00:00:04 -04:00
Jay Vosburgh
b59f9f74c4 bonding: Rework / fix multiple gratuitous ARP support
Support for sending multiple gratuitous ARPs during failovers
was added by commit:

commit 7893b2491a
Author: Moni Shoua <monis@voltaire.com>
Date:   Sat May 17 21:10:12 2008 -0700

    bonding: Send more than one gratuitous ARP when slave takes over

	This change modifies that support to remove duplicated code,
add support for ARP monitor (the original only supported miimon), clear
the grat ARP counter in bond_close (lest a later "ifconfig up" immediately
start spewing ARPs), and add documentation for the module parameter.

	Also updated driver version to 3.3.0.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18 00:00:04 -04:00
Or Gerlitz
01f3109de4 bonding: deliver netdev event for fail-over under the active-backup mode
under active-backup mode and when there's actual new_active slave,
have bond_change_active_slave() call the networking core to deliver
NETDEV_BONDING_FAILOVER event such that the fail-over can be notable
by code outside of the bonding driver such as the RDMA stack and
monitoring tools.

As the correct context of locking appropriate for notifier calls is RTNL
and nothing else, bond->curr_slave_lock and bond->lock are unlocked and
later locked again. This is ensured by the rest of the code to be safe
under backup-mode AND when new_active is not NULL.

Jay Vosburgh modified the original patch for formatting and fixed a
compiler error.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17 23:59:42 -04:00
Or Gerlitz
709f8a45e8 bonding: bond_change_active_slave() cleanup under active-backup
simplified the code of bond_change_active_slave() such that under
active-backup mode there's one "if (new_active)" test and the rest
of the code only does extra checks on top of it. This removed an
unneeded "if (bond->send_grat_arp > 0)" check and avoid calling
bond_send_gratuitous_arp when there's no active slave.

Jay Vosburgh made minor coding style changes to the orignal patch.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-17 23:59:41 -04:00
Jay Vosburgh
3915c1e863 bonding: Add "follow" option to fail_over_mac
Add a "follow" selection for fail_over_mac.  This option
causes the MAC address to move from slave to slave as the active
slave changes.  This is in addition to the existing fail_over_mac option
that causes the bond's MAC address to change during failover.

	This new option is useful for devices that cannot tolerate
multiple ports using the same MAC address simultaneously, either
because it confuses them or incurs a performance penalty (as is the
case with some LPAR-aware multiport devices).  Because the MAC of the
bond itself does not change, the "follow" option is slightly more
reliable during failover and doesn't change the MAC of the bond during
operation.

	This patch requires a previous ARP monitor change to properly
handle RTNL during failovers.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:29 -04:00
Jay Vosburgh
b2220cad58 bonding: refactor ARP active-backup monitor
Refactor ARP monitor for active-backup mode.  The motivation for
this is to take care of locking issues in a clear manner (particularly to
correctly handle RTNL vs. the bonding locks).  Currently, the a-b ARP
monitor does not hold RTNL at all, but future changes will require RTNL
during ARP monitor failovers.

	Rather than using conditional locking, this patch instead breaks
up the ARP monitor into three discrete steps: inspection, commit changes,
and probe.  The inspection phase marks slaves that require link state
changes.  The commit phase is only called if inspection detects that
changes are needed, and is called with RTNL.  Lastly, the probe phase
issues the ARP probes that the inspection phase uses to determine link
state.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:28 -04:00
Moni Shoua
7893b2491a bonding: Send more than one gratuitous ARP when slave takes over
With IPoIB, reception of gratuitous ARP by neighboring hosts
is essential for a successful change of slaves in case of failure.
Otherwise, they won't learn about the HW address change and need
to wait a long time until the neighboring system gives up and sends
an ARP request to learn the new HW address.  This patch decreases
the chance for a lost of a gratuitous ARP packet by sending it more
than once. The number retries is configurable and can be set with a
module param.

Signed-off-by: Moni Shoua <monis@voltaire.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:26 -04:00
Pavel Emelyanov
8047637c70 bonding: Remove unneeded list_empty checks.
Some places iterate over the checked list right after the check
itself, so even if the list is empty, the list_for_each_xxx
iterator will make everything right by himself.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:25 -04:00
Pavel Emelyanov
0883beca7f bonding: Relax unneeded _safe lists iterations.
Many places either do not modify the list under the list_for_each_xxx,
or break out of the loop as soon as the first element is removed.

Thus, this _safe iteration just occupies some unneeded .text space
and requires an additional variable.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:22 -04:00
Pavel Emelyanov
0dd646fe05 bonding: Remove redundant argument from bond_create.
While we're fixing the bond_create, I hope it's OK to polish it
a bit after the fixes.

The third argument is NULL at the first caller and is ignored by
the second one, so remove it.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:21 -04:00
Jay Vosburgh
4b8a9239ee bonding: remove test for IP in ARP monitor
Remove bond_has_ip and all references to it.  With this change,
the ARP monitor will always send ARP probes if the master is up and has
at least one slave.  If the bond has an IP address, it is used in the
ARP probe; if not, the probes are sent with all zeros in the sender's
IP address (which is consistent with an RFC 2131 4.4.1 duplicate address
probe).

	This is useful for cases when bonding itself is hidden underneath
a layer of virtual devices, e.g., with Xen.

	Change suggested by Tsutomu Fujii <t-fujii@nb.jp.nec.com>, who
included a one-line patch that only affected active-backup mode.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:18 -04:00
Jay Vosburgh
5ce0da8f03 bonding: Use msecs_to_jiffies, eliminate panic
Convert bonding to use msecs_to_jiffies instead of doing the
math.  For the ARP monitor, there was an underflow problem that could
result in an infinite loop.  The miimon already had that worked around,
but this is cleaner.

	Originally by Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Jay Vosburgh corrected a math error in the original; Nicolas' original
commit message is:

When setting arp_interval parameter to a very low value, delta_in_ticks
for next arp might become 0, causing an infinite loop.

See http://bugzilla.kernel.org/show_bug.cgi?id=10680

Same problem for miimon parameter already fixed, but fix might be
enhanced, by using msecs_to_jiffies() function.

Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:34:17 -04:00
Stephen Hemminger
38d2f38be9 bonding: handle case of device named bonding_master
If device already exists named bonding_masters, then fail. This is a wierd
corner case only a QA group could love.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-14 22:35:04 -07:00
Jay Vosburgh
569f0c4d90 bonding: fix enslavement error unwinds
As part of:

commit c2edacf80e
Author: Jay Vosburgh <fubar@us.ibm.com>
Date:   Mon Jul 9 10:42:47 2007 -0700

    bonding / ipv6: no addrconf for slaves separately from master

two steps were rearranged in the enslavement process: netdev_set_master
is now before the call to dev_open to open the slave.

	This patch updates the error cases and unwind process at the
end of bond_enslave to match the new order.  Without this patch, it is
possible for the enslavement to fail, but leave the slave with IFF_SLAVE
set in its flags.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 12:01:32 -04:00
Pavel Emelyanov
ae68c39819 bonding: Deadlock between bonding_store_bonds and bond_destroy_sysfs.
The sysfs layer has an internal protection, that ensures, that
all the process sitting inside ->sore/->show callback exits
before the appropriate entry is unregistered (the calltraces
are rather big, but I can provide them if required).

On the other hand, bonding takes rtnl_lock in
a) the bonding_store_bonds, i.e. in ->store callback,
b) module exit before calling the sysfs unregister routines.

Thus, the classical AB-BA deadlock may occur. To reproduce run
# while :; do modprobe bonding; rmmod bonding; done
and
# while :; do echo '+bond%d' > /sys/class/net/bonding_masters ; done
in parallel.

The fix is to move the bond_destroy_sysfs out of the rtnl_lock,
but _before_ bond_free_all to make sure no bonding devices exist
after module unload.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 12:01:30 -04:00
Jay Vosburgh
c4ebc66a1a bonding: fix error unwind in bonding_store_bonds
Fixed an error unwind in bonding_store_bonds that didn't release
the locks it held, and consolidated unwinds into a common block at the
end of the function.  Bug reported by Pavel Emelyanov <xemul@openvz.org>,
who provided a different fix.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 12:01:29 -04:00
Pavel Emelyanov
822973ba79 bonding: Do not call free_netdev for already registered device.
If the call to bond_create_sysfs_entry in bond_create fails, the
proper rollback is to call unregister_netdevice, not free_netdev.
Otherwise - kernel BUG at net/core/dev.c:4057!

Checked with artificial failures injected into bond_create_sysfs_entry.

Pavel's original patch modified by Jay Vosburgh to move code around
for clarity (remove goto-hopping within the unwind block).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06 12:01:27 -04:00
Denis V. Lunev
a95609cb02 netdev: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Joe Perches
dc13b38599 drivers/net/bonding/bond_main.c - remove unnecessary #define
bond_main.c already #includes <linux/seq_file.h>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16 20:09:35 -04:00
David S. Miller
e1ec1b8ccd Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/s2io.c
2008-04-02 22:35:23 -07:00
David S. Miller
6952d8923b [BOND]: Fix warning in bond_sysfs.c
original_mtu is only used if we end up with a non-NULL
dev, and it is assigned in all such cases, but GCC can't
see that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28 16:15:38 -07:00
David S. Miller
8e8e43843b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/usb/rndis_host.c
	drivers/net/wireless/b43/dma.c
	net/ipv6/ndisc.c
2008-03-27 18:48:56 -07:00
Jay Vosburgh
2cfb8b71cc bonding: update version
Update version to 3.2.5.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:15:51 -04:00
Libor Pechacek
92b41daa45 bonding: Fix sysfs attribute handling
For bonding interfaces any attempt to read the sysfs directory contents after
module removal results in an oops.  The fix is to release sysfs attributes
for the interfaces upon module unload.

Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:15:48 -04:00
Jay Vosburgh
966bc6f434 bonding: fix two compiler warnings
Fix two compiler warnings that are new with recent versions of gcc
(apparently 4.2 and up).  One is fixed by refactoring; this change was
supplied by Stephen Hemminger.  The other was fixed by labelling the
variable as uninitialized_var() after confirming via inspection that it
cannot actually be used uninitialized.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:15:40 -04:00
Jay Vosburgh
2bf86b7aa8 bonding: Fix locking in 802.3ad mode
The 802.3ad state machine lock can be acquired in both softirq and
not softirq context, but was not held at _bh to prevent a deadlock (which
could occur if a LACPDU arrived and was processed while the lock was
held).

	Corrected this, now hold the state machine lock at _bh to prevent
deadlock.

	Bug reported by Todd Fleisher <todd@fleish.org>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:15:38 -04:00
YOSHIFUJI Hideaki
c346dca108 [NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.
Introduce per-net_device inlines: dev_net(), dev_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:53 +09:00
Pavel Emelyanov
988b705077 [ARP]: Introduce the arp_hdr_len helper.
There are some place, that calculate the ARP header length. These
calculations are correct, but 
 a) some operate with "magic" constants,
 b) enlarge the code length (sometimes at the cost of coding style),
 c) are not informative from the first glance.

The proposal is to introduce a helper, that includes all the good
sides of these calculations.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03 12:20:57 -08:00
Denis V. Lunev
6133fb1aa1 [NETNS]: Disable inetaddr notifiers in namespaces other than initial.
ip_fib_init is kept enabled. It is already namespace-aware.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 20:46:17 -08:00
Jay Vosburgh
43cd2595e7 bonding: update version
Update bonding to version 3.2.4.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:34 -08:00
Jay Vosburgh
21c9d8d73d bonding: do not acquire rtnl in ARP monitor
The ARP monitor functions currently acquire RTNL when performing
failover operations, but do so incorrectly (out of order).  This causes
various warnings from might_sleep.

	The ARP monitor isn't supported for any of the bonding modes
that actually require RTNL, so it is safe to not hold RTNL when
failing over in the ARP monitor.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:33 -08:00
Andy Gospodarek
2439f9ebd4 bonding: fix race that causes invalid statistics
I've seen reports of invalid stats in /proc/net/dev for bonding
interfaces, and found it's a pretty easy problem to reproduce.  Since
the current code zeros the bonding stats when a read is requested and a
pointer to that data is returned to the caller we cannot guarantee that
the caller has completely accessed the data before a successive call to
request the stats zeroes the stats again.

This patch creates a new stack variable to keep track of the updated
stats and copies the data from that variable into the bonding stats
structure.  This ensures that the value for any of the bonding stats
should not incorrectly return zero for any of the bonding statistics.
This does use more stack space and require an extra memcpy, but it seems
like a fair trade-off for consistently correct bonding statistics.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:13 -08:00
Jay Vosburgh
4fe4763cd8 bonding: fix NULL pointer deref in startup processing
Fix the "are we creating a duplicate" check to not compare
the name if the name is NULL (meaning that the system should select
a name).  Bug reported by Benny Amorsen <benny+usenet@amorsen.dk>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:12 -08:00