Commit Graph

1484 Commits

Author SHA1 Message Date
Linus Torvalds
e93252faca Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: Remove dependence on host_set->dev for SAS
  [PATCH] libata: ata_scsi_ioctl cleanup
  [PATCH] libata: ata_scsi_queuecmd cleanup
  [libata] export ata_dev_pair; trim trailing whitespace
  [PATCH] libata: add ata_dev_pair helper
  [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
  [PATCH] libata: make ata_set_mode() responsible for failure handling
  [PATCH] libata: use ata_dev_disable() in ata_bus_probe()
  [PATCH] libata: implement ata_dev_disable()
  [PATCH] libata: check if port is disabled after internal command
  [PATCH] libata: make per-dev transfer mode limits per-dev
  [PATCH] libata: add per-dev pio/mwdma/udma_mask
  [PATCH] libata: implement ata_unpack_xfermask()
  [libata] Move some bmdma-specific code to libata-bmdma.c
  [libata sata_uli] kill scr_addr abuse
  [libata sata_nv] eliminate duplicate codepaths with iomap
  [libata sata_nv] cleanups: convert #defines to enums; remove in-file history
  [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
2006-03-24 08:19:51 -08:00
Alexey Dobriyan
53b3531bbb [PATCH] s/;;/;/g
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:24 -08:00
Al Viro
22bc685f4b [PATCH] remove ISA legacy functions: drivers/scsi/in2000.c
switched to ioremap(), cleaned the probing up a bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Al Viro
c818cb6406 [PATCH] remove ISA legacy functions: drivers/scsi/g_NCR5380.c
switched CONFIG_SCSI_G_NCR5380_MEM code in g_NCR5380 to ioremap(); massaged
g_NCR5380.h accordingly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Brian King
2f1f610b62 [PATCH] libata: Remove dependence on host_set->dev for SAS
Remove some of the dependence on the host_set struct
in preparation for supporting SAS HBAs. Adds a struct device
pointer to the ata_port struct.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Brian King
2af10a818d [PATCH] libata: ata_scsi_ioctl cleanup
In preparation for SAS, kill some unnecessary code in ata_scsi_ioctl
to find the ATA port and device given the scsi_device. Neither local
is used in the function.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Brian King
eb3f0f9c6c [PATCH] libata: ata_scsi_queuecmd cleanup
Encapsulate part of ata_scsi_queuecmd so that it can be
reused by future SAS patches.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Jeff Garzik
2e9edbf815 [libata] export ata_dev_pair; trim trailing whitespace
Mostly, trim trailing whitespace.

Also:
* export ata_dev_pair
* move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 09:56:57 -05:00
Alan Cox
ebdfca6eb1 [PATCH] libata: add ata_dev_pair helper
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:52:32 -05:00
Nigel Cunningham
082776e4be [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
At the moment libata doesn't pass pm_message_t down ata_device_suspend.
This causes drives to be powered down when we just want a freeze,
causing unnecessary wear and tear. This patch gets pm_message_t passed
down so that it can be used to determine whether to power down the
drive.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>

 drivers/scsi/libata-core.c |    5 +++--
 drivers/scsi/libata-scsi.c |    4 ++--
 drivers/scsi/scsi_sysfs.c  |    2 +-
 include/linux/libata.h     |    4 ++--
 include/scsi/scsi_host.h   |    2 +-
 5 files changed, 9 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:51:36 -05:00
Tejun Heo
83206a2903 [PATCH] libata: make ata_set_mode() responsible for failure handling
Make ata_set_mode() responsible for determining whether to take port
or device offline on failure.  ata_dev_set_xfermode() and
ata_dev_set_mode() indicate error to the caller instead of disabling
port directly on failure.  Also, for consistency, ata_dev_present()
check is done in ata_set_mode() instead of ata_dev_set_mode().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:39:57 -05:00
Tejun Heo
fcef978f9d [PATCH] libata: use ata_dev_disable() in ata_bus_probe()
We may or may not disable a device after ata_dev_configure() fails.
Kill 'not supported, ignoring' message in ata_dev_configure() and use
ata_dev_disable() in ata_bus_probe().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:39:57 -05:00
Tejun Heo
0b8efb0a16 [PATCH] libata: implement ata_dev_disable()
This patch implements ata_dev_disable() which prints a warning message
and takes @dev offline.  Currently, this is done by explicitly
incrementing dev->class with case-by-case warning messages.  Giving
user clear indication when libata gives up will be more important as
libata will be doing more retries.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:39:57 -05:00
Tejun Heo
1f7dd3e9d6 [PATCH] libata: check if port is disabled after internal command
libata core is being changed to disallow port/device disable on lower
layers.  However, some LLDDs (sata_mv) directly disable port on
command failure.  This patch makes ata_exec_internal() check whether a
port got disabled after an internal command.  If it is, AC_ERR_SYSTEM
is added to err_mask and the port gets re-enabled.

As internal command failure results in device disable for drivers
which don't implement newer reset/EH callbacks, this change results in
no behavior change for single device per port controllers.  For
slave-possible LLDDs which disable port on command failure, (1) such
drivers don't exist currently, (2) issuing command to the other device
of once-disabled port shouldn't result in catastrophe even if such
driver exists.  So, this should be enough as a temporary measure.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:39:57 -05:00
Tejun Heo
5a52913955 [PATCH] libata: make per-dev transfer mode limits per-dev
Now that each ata_device has xfer masks, per-dev limits can be made
per-dev instead of per-port.  Make per-dev limits per-dev.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:28:33 -05:00
Tejun Heo
acf356b12d [PATCH] libata: add per-dev pio/mwdma/udma_mask
Add per-dev pio/mwdma/udma_mask.  All transfer mode limits used to be
applied to ap->*_mask which unnecessarily restricted other devices
sharing the port.  This change will also benefit later EH speed down
and hotplug.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:28:33 -05:00
Tejun Heo
c0489e4efc [PATCH] libata: implement ata_unpack_xfermask()
Implement ata_unpack_xfermask().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:28:33 -05:00
Jes Sorensen
e723ccd805 [PATCH] sem2mutex: drivers/scsi/ide-scsi.c
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:10 -08:00
Christoph Hellwig
6a2900b676 [PATCH] kill cdrom ->dev_ioctl method
Since early 2.4.x all cdrom drivers implement the block_device methods
themselves, so they can handle additional ioctls directly instead of going
through the cdrom layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:09 -08:00
Jeff Garzik
2cc432eed0 [libata] Move some bmdma-specific code to libata-bmdma.c
No code changes, just moving code between files.
2006-03-23 00:32:03 -05:00
Jeff Garzik
50106c5a03 [libata sata_uli] kill scr_addr abuse
sata_uli was storing PCI config addresses in a variable intended for
port addresses, a variable soon to become void __iomem *.

Update the driver to store the SCR address, found in PCI config space,
in the driver-private data area.
2006-03-23 00:14:36 -05:00
Jeff Garzik
02cbd926e9 [libata sata_nv] eliminate duplicate codepaths with iomap
eliminate a bunch of
	if (mmio)
		writel()
	else
		outl()

code with the pci_iomap() and io{read,write}{8,16,32}() interface.
2006-03-22 23:59:46 -05:00
Jeff Garzik
10ad05df14 [libata sata_nv] cleanups: convert #defines to enums; remove in-file history 2006-03-22 23:50:50 -05:00
Jeff Garzik
142877b07f [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
* libata will soon move to iomap, so we should use
  pci_iomap() and pci_iounmap().
* Use kzalloc() where appropriate.
2006-03-22 23:30:34 -05:00
Linus Torvalds
0caab23e11 scsi: link in the debug driver last
If the debug driver is built-in, link it in last, so that any real
drivers will probe first, rather than having the debug driver pick the
first scsi slots..

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 17:39:38 -08:00
Tejun Heo
4658f79bec [PATCH] ahci: add softreset
Now that libata is smart enought to handle both soft and hard resets,
add softreset method.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:56:53 -05:00
Tejun Heo
f0c8bbfa15 [PATCH] libata: do not ignore PIO-only devices
As libata now can do PIO, don't ignore PIO-only devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:56:53 -05:00
Alan Cox
67951aded3 [PATCH] libata: Symbol exports
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:55:41 -05:00
Alan Cox
f4b15fefb3 [PATCH] Update libata DMA blacklist to cover versions, and resync with IDE layer
Not much to say here except that some drives have fixed and bad firmware

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:55:41 -05:00
Alan Cox
09c7ad79dc [PATCH] libata: Fix a drive detection problem
The current code follows the spec but uses an overlong delay. This would
be great if the hardware did. Several vendors however forget the D7
pulldown. Fortunately 0xFF isnt a sane reset state so we can use it to
skip detection as is done in drivers/ide. (ie this is a tested solution
over a long time)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:55:40 -05:00
Alan Cox
7c74ffd072 [PATCH] libata: note missing posting in mmio cmd write
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 19:55:40 -05:00
Jeff Garzik
f01c184569 Merge branch 'master' 2006-03-22 19:13:54 -05:00
Linus Torvalds
8b4b6707ee Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  fixed path to moved file in include/linux/device.h
  Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description
  Documentation/dvb/get_dvb_firmware: fix firmware URL
  Documentation: Update to BUG-HUNTING
  Remove superfluous NOTIFY_COOKIE_LEN define
  add "tags" to .gitignore
  Fix "frist", "fisrt", typos
  fix rwlock usage example
  It's UTF-8
2006-03-22 10:58:05 -08:00
Linus Torvalds
2152f85366 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits)
  [SCSI] libata: implement minimal transport template for ->eh_timed_out
  [SCSI] eliminate rphy allocation in favour of expander/end device allocation
  [SCSI] convert mptsas over to end_device/expander allocations
  [SCSI] allow displaying and setting of cache type via sysfs
  [SCSI] add scsi_mode_select to scsi_lib.c
  [SCSI] 3ware 9000 add big endian support
  [SCSI] qla2xxx: update MAINTAINERS
  [SCSI] scsi: move target_destroy call
  [SCSI] fusion - bump version
  [SCSI] fusion - expander hotplug suport in mptsas module
  [SCSI] fusion - exposing raid components in mptsas
  [SCSI] fusion - memory leak, and initializing fields
  [SCSI] fusion - exclosure misspelled
  [SCSI] fusion - cleanup mptsas event handling functions
  [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
  [SCSI] fusion - static fix's
  [SCSI] fusion - move some debug firmware event debug msgs to verbose level
  [SCSI] fusion - loginfo header update
  [SCSI] add scsi_reprobe_device
  [SCSI] megaraid_sas: fix extended timeout handling
  ...
2006-03-22 10:47:24 -08:00
Nick Piggin
f9aed0e253 [PATCH] sg: use compound pages
sg increments the refcount of constituent pages in its higher order memory
allocations when they are about to be mapped by userspace.  This is done so
the subsequent get_page/put_page when doing the mapping and unmapping does not
free the page.

Move over to the preferred way, that is, using compound pages instead.  This
fixes a whole class of possible obscure bugs where a get_user_pages on a
constituent page may outlast the user mappings or even the driver.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Douglas Gilbert <dougg@torque.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:01 -08:00
Christoph Lameter
ac2b898ca6 [PATCH] slab: Remove SLAB_NO_REAP option
SLAB_NO_REAP is documented as an option that will cause this slab not to be
reaped under memory pressure.  However, that is not what happens.  The only
thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused
slab elements that were allocated in batch in cache_reap().  Cache_reap()
is run every few seconds independently of memory pressure.

Could we remove the whole thing?  Its only used by three slabs anyways and
I cannot find a reason for having this option.

There is an additional problem with SLAB_NO_REAP.  If set then the recovery
of objects from alien caches is switched off.  Objects not freed on the
same node where they were initially allocated will only be reused if a
certain amount of objects accumulates from one alien node (not very likely)
or if the cache is explicitly shrunk.  (Strangely __cache_shrink does not
check for SLAB_NO_REAP)

Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:53:59 -08:00
Jeff Garzik
55cca65e19 [libata sata_vsc, sata_svw] Convert #define'd constants to enums
Also, bump sata_vsc version.
2006-03-21 22:14:17 -05:00
Dan Williams
c962990a38 [libata] sata_vsc: fix inconsistent NULL checking
Also, cleanup interrupt mask content and note in Kconfig that this
driver supports the Intel 31244.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 22:07:13 -05:00
Jeff Garzik
4d4681f6b9 [libata] fix oops on non-DMA bmdma hardware
Alan noted: "bmdma may be zero but the bmdma_irq_clear function gets
called even in this case during pure PIO operation. Check we have a
bmdma before we use it."

I fixed this by adding a check for zero.  While was I there, I fixed the
non-standard indentation of the small function's code.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:31:22 -05:00
Alan Cox
23cfce8924 [PATCH] libata: make irqtrap mode compile
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Alan Cox
88f93a31dc [PATCH] libata: report which drive is causing mode problems
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Alan Cox
d33d44facc [PATCH] libata: two new PCI helpers
The first performs the simplex clearing relevant to some chipsets that
report simplex by default but can in fact do more if poked. The second
is used to strip DMA modes from a PCI control with no BAR4 allocation.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Alan Cox
41bbc8bf1a [PATCH] libata: Note weakness in our PCI handling that one day wants fixing
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Alan Cox
db7f44d96e [PATCH] libata: make code actually compile with debugging on
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Alan Cox
2d2020242d [PATCH] libata: pick a less confusion "um dunno" error
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:21:32 -05:00
Mark Lord
806a6e7a99 [libata] sata_mv: off-by-1 fix
This patch addresses a number of weird behaviours observed
for the sata_mv driver, by fixing an "off by one" bug in processing
of the EDMA response queue.

Basically, sata_mv was looking in the wrong place for
command results, and this produced a lot of unpredictable behaviour.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:11:53 -05:00
Brian King
a6cce2a79d [PATCH] libata: ata_scsi_slave_config cleanup
Encapsulate some of ata_scsi_slave_config so that parts
can be reused in future SAS patches.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:03:43 -05:00
Brian King
e46834cd2d [PATCH] libata: Add some dummy noop functions
Add some dummy noop functions for use by libata clients
that do not need to do anything. Future SAS patches will
utilize these functions.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:03:43 -05:00
Albert Lee
f59b0cf8a3 [PATCH] libata-dev: Remove ATA_PROT_PIO_MULT
Remove the ATA_PROT_PIO_MULT protocol.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 20:39:46 -05:00
Albert Lee
41ade50c4e [PATCH] libata-dev: add flush task to ata_exec_internal()
Add ata_port_flush_task() to ata_exec_internal().

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 20:39:46 -05:00