Commit Graph

1573 Commits

Author SHA1 Message Date
Linus Torvalds
5647ac0ad4 Removal of GENERIC_GPIO for v3.10
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
 cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
 possible to do so which has been causing confusion and breakage. This
 branch does the work to completely eliminate GENERIC_GPIO.
 
 However, it is not trivial to just create a branch to remove it. Over
 the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
 added to linux-next that conflicts with this branch. The following must
 be done to resolve the conflicts when merging this branch into mainline:
 
 * "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
   replaced with CONFIG_GPIOLIB
 * "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
   documentation.
 * Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
 * definitions of the option in architecture Kconfig code should be deleted.
 
 Stephen has 3 merge fixup patches[1] that do the above. They are currently
 applicable on mainline as of May 2nd.
 
 [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRifUnAAoJEEFnBt12D9kBs2YP/0U6+ia+xYvkVaJc28PDVIzn
 OReZNcJOYU8D5voxz0voaRD0EdcPwjbMu9Kp9aXMHlk4VxevF+8jCc/us0bIjtO1
 VcB5VmSCIhMhxdnBlum11Mk7Vr5MCweyl9NBsypnPt8cl4obMBZHf2yzoodFktNb
 wtyYlOb6FALtc6iDbOO6dG3w9F7FAOLvskUFzdv89m8mupTsBu9jw9NqFDbJHOex
 rxq0Sdd+kWF/nkJVcV5Y6jIdletRlhpipefMJ9diexreHvwqh+c4kJEYZaXgB5+m
 ha95cPbReK1d+RqzM3A8d4irzSVSmq4k7ijI6QkFOr48+AH7XsgKv5so885LKzMN
 IIXg2Phm9i0H8+ecEvhcc4oIYBHJiEKK54Y0qUD9dqbFoDGPTCSqMHdSSMbpAY+J
 bIIXlVzj1En3PPNUJLPt8q8Qz6WxCT9mDST3QSGYnD4o90HT+1R9j92RxGL6McOq
 rUOyJDwmzFvpBvKK4raGdOU435M+ps2NPKKNIRaIGQPPY9rM1kN4YqvhXukEsC9L
 3a3+3cQLh7iKxBHncxeQsJfethP1CPkJnzvF9r+ZZLf2rcPH4pbQIE2uO0XnX/nd
 5/DKi0nGgAJ//GMMzdo3RiOA5zGFjIZ/KMvfhQldpP6qFJRhqdGi6FPlAcwr1z1n
 YnCByPwwlvfC4LTXFOGL
 =xodc
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select
2013-05-09 09:59:16 -07:00
Mark Brown
bee5465814 Merge remote-tracking branch 'regulator/topic/wm8994' into v3.9-rc8 2013-04-28 02:13:50 +01:00
Mark Brown
bcd5d1d978 Merge remote-tracking branch 'regulator/topic/twl' into v3.9-rc8 2013-04-28 02:13:49 +01:00
Mark Brown
32e40be1e2 Merge remote-tracking branch 'regulator/topic/tps80031' into v3.9-rc8 2013-04-28 02:13:48 +01:00
Mark Brown
64dceea446 Merge remote-tracking branch 'regulator/topic/tps6586x' into v3.9-rc8 2013-04-28 02:13:48 +01:00
Mark Brown
813dc1b086 Merge remote-tracking branch 'regulator/topic/tps65023' into v3.9-rc8 2013-04-28 02:13:47 +01:00
Mark Brown
22a712b90c Merge remote-tracking branch 'regulator/topic/tps62360' into v3.9-rc8 2013-04-28 02:13:47 +01:00
Mark Brown
eea8e85e3b Merge remote-tracking branch 'regulator/topic/s5m8767' into v3.9-rc8 2013-04-28 02:13:46 +01:00
Mark Brown
fbf6630d70 Merge remote-tracking branch 'regulator/topic/rc5t583' into v3.9-rc8 2013-04-28 02:13:46 +01:00
Mark Brown
ae5f5203e5 Merge remote-tracking branch 'regulator/topic/palmas' into v3.9-rc8 2013-04-28 02:13:45 +01:00
Mark Brown
95328a190e Merge remote-tracking branch 'regulator/topic/max8998' into v3.9-rc8 2013-04-28 02:13:44 +01:00
Mark Brown
9eaec296d0 Merge remote-tracking branch 'regulator/topic/max8997' into v3.9-rc8 2013-04-28 02:13:43 +01:00
Mark Brown
8ca5e1fa9e Merge remote-tracking branch 'regulator/topic/max8973' into v3.9-rc8 2013-04-28 02:13:43 +01:00
Mark Brown
a2c05e91b9 Merge remote-tracking branch 'regulator/topic/max8952' into v3.9-rc8 2013-04-28 02:13:43 +01:00
Mark Brown
2e1be9f7b3 Merge remote-tracking branch 'regulator/topic/max8925' into v3.9-rc8 2013-04-28 02:13:42 +01:00
Mark Brown
c4578da56a Merge remote-tracking branch 'regulator/topic/max77686' into v3.9-rc8 2013-04-28 02:13:42 +01:00
Mark Brown
388128ffd6 Merge remote-tracking branch 'regulator/topic/max1586' into v3.9-rc8 2013-04-28 02:13:41 +01:00
Mark Brown
329bd970d8 Merge remote-tracking branch 'regulator/topic/lp8788' into v3.9-rc8 2013-04-28 02:13:41 +01:00
Mark Brown
3dc06c1baf Merge remote-tracking branch 'regulator/topic/gpio' into v3.9-rc8 2013-04-28 02:13:40 +01:00
Mark Brown
5f19a85ba7 Merge remote-tracking branch 'regulator/topic/fan53555' into v3.9-rc8 2013-04-28 02:13:39 +01:00
Mark Brown
1d60a4cf97 Merge remote-tracking branch 'regulator/topic/enable-invert' into v3.9-rc8 2013-04-28 02:13:37 +01:00
Mark Brown
0e340ce1dd Merge remote-tracking branch 'regulator/topic/core' into v3.9-rc8 2013-04-28 02:13:37 +01:00
Mark Brown
97844ede94 Merge remote-tracking branch 'regulator/topic/ascend' into v3.9-rc8 2013-04-28 02:13:36 +01:00
Mark Brown
83b0dd9ea3 Merge remote-tracking branch 'regulator/topic/as3711' into v3.9-rc8 2013-04-28 02:13:36 +01:00
Mark Brown
f50b7f2b51 Merge remote-tracking branch 'regulator/topic/arizona' into v3.9-rc8 2013-04-28 02:13:35 +01:00
Mark Brown
c98cac899b Merge remote-tracking branch 'regulator/topic/ab8500' into v3.9-rc8 2013-04-28 02:13:34 +01:00
Mark Brown
9e63d23056 Merge remote-tracking branch 'regulator/topic/ab3100' into v3.9-rc8 2013-04-28 02:13:33 +01:00
Axel Lin
78040b630f regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel
It is necessary to clear MC13892_SWITCHERS0_SWxHI bit when set voltage to the
voltage range from 1100000 to 1375000. Leaving MC13892_SWITCHERS0_SWxHI bit
untouched may result in wrong voltage setting.

For example, currently switch voltage from 1400000 to 1300000 will set the
voltage to 1800000 because the HI bit is still set.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-28 02:13:02 +01:00
Axel Lin
020501f1a0 regulator: Remove NULL test before calling regulator_unregister()
It's safe to call regulator_unregister() with NULL, thus remove the NULL test
before regulator_unregister() calls.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-28 02:11:19 +01:00
Alexander Shiyan
86b139f0f3 regulator: mc13783: Add device tree probe support
Patch adds device tree probe support for mc13783-regulator driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-28 02:10:00 +01:00
Alexander Shiyan
eb0d8e7a14 regulator: mc13xxx: Add warning of incorrect names of regulators
This patch adds a warning about incorrect regulators instead of
printing the names of non-information message about the wrong amount.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-28 02:10:00 +01:00
Axel Lin
3ecf198eab regulator: max77686: Don't update max77686->opmode if update register fails
Ensure max77686->opmode always has correct status.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-28 02:07:52 +01:00
Axel Lin
71622e15dd regulator: max8952: Add missing config.of_node setting for regulator register
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-26 18:17:01 +01:00
Axel Lin
018fd856ce regulator: ab3100: Fix regulator register error handling
Ensure to unregister all regulators before return error in probe().

The regulator register order depends on the regulator ID pass to
ab3100_regulator_register() function. Thus we need to scan ab3100_regulator_desc
and find the index of successfully registered regulators, or alternatively just
call ab3100_regulators_remove() to unregister all registered regulators.

Since current code uses a static ab3100_regulators table, explicitly set
reg->rdev = NULL after regulator_unregister() call to ensure calling
ab3100_regulators_remove() in the unwind path always work.

Also move ab3100_regulators_remove() to avoid forward declaration.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-26 16:33:10 +01:00
Axel Lin
b92f567deb regulator: tps6524x: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-26 16:32:05 +01:00
Axel Lin
6dcbc200fe regulator: lp8788-buck: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:50:23 +01:00
Axel Lin
a32f9e0202 regulator: lp872x: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:50:23 +01:00
Axel Lin
3bdf599289 regulator: mc13892: Use regulator_map_voltage_ascend for mc13892_sw_regulator_ops
Both mc13892_sw1 and mc13892_sw voltage table have ascendant voltage list.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:49:46 +01:00
Axel Lin
c4bbfbd548 regulator: tps65023: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:49:28 +01:00
Axel Lin
2040541afb regulator: tps65023: Merge tps65020 ldo1 and ldo2 vsel table
tps65020 ldo1 and ldo2 vsel tables are identical, merge them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:49:27 +01:00
Axel Lin
a1bb63a80c regulator: tps6507x: Use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-25 11:48:37 +01:00
Linus Walleij
8735bc2fe6 regulator: ab3100: device tree support
This implements device tree support for the AB3100 regulators
driver. The initial settings are moved out of platform data
and into the driver for the device tree case, as it appears
that there is no way to supply this as AUXDATA for an I2C
device. The style and bindings are heavily inspired by
Lee Jones' style for AB8500.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24 10:54:07 +01:00
Linus Walleij
9b31835341 regulator: ab3100: refactor probe to use IDs
This refactors the AB3100 regulator probe to use regulator IDs
and pass this to a separate registration function. This works
much smoother when migrating to device tree, as we can use a
match table with this regulator ID encoded in the .driver_data.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24 10:53:59 +01:00
Axel Lin
b27032ca3e regulator: max8973: Don't override control1 variable when set ramp delay bits
Current code overrides control1 variable when setting ramp delay bits.
Fix it by just setting ramp_delay bits.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24 10:52:28 +01:00
Axel Lin
bc49c87ec7 regulator: tps80031: Convert tps80031_dcdc_ops to [get|set]_voltage_sel_regmap
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:47:38 +01:00
Axel Lin
58fa6ab42c regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
Currently we have a special code in tps80031_ldo_set_voltage_sel() to handle
LDO2 track mode for TPS80031 or TPS80032-ES1.0. The purpose is to address below
issues:

Issue description:
- LDO2 traking mode is enabled
- LDO2 tracks SMPS2 voltage.
- LDO2 automatically switch-off when LDO2_CFG_VOLTAGE is changed to some discrete values (non exhaustive list):
            00011001, 00011010, 00011011, 00011100, .
- LDO2 switch-on again when LDO2_CFG_VOLTAGE is changed to other values (non exhaustive list):
        00011000, 00010111, .

LDOs have reserved codes. For these codes, LDO is switch-off.

In tracking, LDO2 ref comes from SMPS2.
However LDO2 enable is still gated by LDO2 VSEL decoding.
As a result, in tracking mode LDO2 will be disabled for following code (SMPS VSEL format):
000000 & 100000 (MSB not decoded)
011001 & 111001 (MSB not decoded)
011010 & 111010 (MSB not decoded)
011100 & 111100 (MSB not decoded)
011101 & 111101 (MSB not decoded)
011110 & 111110 (MSB not decoded)

However, current code has below bugs:
1. It uses regulator_list_voltage_linear, so list_voltage() still shows above
   invalid selectors have supported voltage.
2. Current code may return -EINVAL in tps80031_ldo_set_voltage_sel() for
   supported voltage. This is because when we use regulator_list_voltage_linear
   as list_voltage callback, regulator core will default use
   regulator_map_voltage_linear(). regulator_map_voltage_linear() has an
   assumption that the voltages are linear which is not true for this case.

   For example,
   when request voltage range is: min_uV=950000 uV && max_uV=1200000 uV
   regulator_map_voltage_linear() returns the selector is 29 (0x1D),
   set_voltage_sel() returns -EINVAL.
   (The selector is in invalid range, 0x19 ~ 0x1f).

   In above case, map_voltage() should find the lowest valid voltage within
   specific range (selector = 0x20) and set_voltage_sel() should successfully
   set the voltage to 987500 uV.

This patch fixes these issues by:
1. Add checking valid setting for LDO2 track mode of TPS80031 or TPS80032-ES1.0
   in list_voltage.  So it returns -EINVAL for invalid selectors.
2. Implement tps80031_ldo_map_voltage, use regulator_map_voltage_iterate()
   to find the lowest voltage within specific range for TPS80031 or
   TPS80032-ES1.0. This is required when the voltage map is no longer linear.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:47:37 +01:00
Axel Lin
4d673bbc58 regulator: tps6586x: Convert to use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Thus use regulator_map_voltage_ascend is more efficient than the default
regulator_map_voltage_iterate.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:41:06 +01:00
Axel Lin
9fa8175f0f regulator: tps65910: Convert to use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Some regulators have more than 200 supported voltages.
e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:
n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE
           = 73 * 3
           = 219

Thus it worth converting to regulator_map_voltage_ascend rather than use
default regulator_map_voltage_iterate.

For consistent, convert all regulators to regulator_map_voltage_ascend.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:41:06 +01:00
Axel Lin
b50003b69d regulator: lp3972: Convert to use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Thus use regulator_map_voltage_ascend is more efficient than the default
regulator_map_voltage_iterate.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:39:33 +01:00
Axel Lin
3e655618e1 regulator: lp3971: Convert to use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver.
Thus use regulator_map_voltage_ascend is more efficient than the default
regulator_map_voltage_iterate.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23 11:39:27 +01:00