Commit Graph

130 Commits

Author SHA1 Message Date
Stephen Hemminger
93dd79e87b r8169: remove poll_locked logic
Disabling napi polling early is well enough.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-28 18:21:06 +01:00
Stephen Hemminger
7fab06c0ca r8169: napi config
Don't call napi_disable if not configured and make sure that any
misuse of napi_xxx in future fails with a compile error.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-28 18:21:01 +01:00
Francois Romieu
7da97ec96a r8169: more phy init for the 8168
Realtek's r8168 driver version 8.003.00 adds new init sequences
(they do not appear in version 8.002.00).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:26:17 +02:00
Francois Romieu
a3f8067186 r8169: update the phy init for the 8168C
The values have been updated between version 8.002.00 and version
8.003.00 of Realtek's r8168 driver. This modification syncs the
8168C with version 8.003.00.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:26:11 +02:00
Francois Romieu
a441d7b6bf r8169: phy init cleanup
Consistent use of hexadecimal. No change of behavior otherwise.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:26:03 +02:00
Francois Romieu
867763c113 r8169: phy init for the 8168
The values have been extracted from Realtek's r8168 driver
version 8.002.00.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:54 +02:00
Francois Romieu
5615d9f1b9 r8169: make room for more phy init changes
The code is reworked to easily add phy-dependant init changes.
No change of behavior should be noticed.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:46 +02:00
Francois Romieu
e179bb7b43 r8169: remove dead wood
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:40 +02:00
Francois Romieu
e3cf0cc091 r8169: add MAC identifiers
The identifiers have been extracted from Realtek's drivers:
- version 8.002.00 of the r8168 driver
- version 6.002.00 of the r8169 driver
- version 1.002.00 of the r8101 driver

1. RTL_GIGA_MAC_VER_17 (8168Bf) is isolated from RTL_GIGA_MAC_VER_12 (8168Be)
   Both are still handled the same in rtl8169_set_speed_xmii and in
   rtl_set_rx_mode to avoid changes of behavior in this patch.

2. RTL_GIGA_MAC_VER_16 (8101Ec) is isolated from RTL_GIGA_MAC_VER_13 (8101Eb)
   Same thing as above with relation to rtl8169_set_speed_xmii,
   rtl_set_rx_mode and rtl_hw_start_8101.

3. The remaining new identifiers should not hurt.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:33 +02:00
Francois Romieu
bc1660b570 r8169: use the existing symbolic name of vendor PCI ID 0x1259
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:27 +02:00
Francois Romieu
cebf8cc79e r8169: remove private net_device_stats structure
Use net_device_stats in the net_device structure.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:25:16 +02:00
Francois Romieu
fbac58fcde r8169: MSI support
It is currently limited to the tested 0x8136 and 0x8168. 8169sb/8110sb ought
to handle it as well where they support MSI.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Tester-Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
2007-10-18 21:24:43 +02:00
Francois Romieu
f23e7fdad1 r8169: convert bitfield to plain enum mask
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:24:34 +02:00
Joe Perches
53edbecd58 r8169: KERN_XXX vs PFX (trivial)
Wrong ordering in printk.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:24:19 +02:00
Joe Perches
06fa73589f r8169: add KERN_DEBUG to dprintk (trivial)
- prefix dprintk with KERN_DEBUG
- fix a bug with existing use of dprintk (PFX KERN_INFO PFX)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-10-18 21:22:44 +02:00
Al Viro
b1eab70130 r8169: endianness
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:52:03 -07:00
Jeff Garzik
b9f2c0440d [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count
These have been superceded by the new ->get_sset_count() hook.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:45 -07:00
Jeff Garzik
88d3aafdae [ETHTOOL] Provide default behaviors for a few ethtool sub-ioctls
For the operations
	get-tx-csum
	get-sg
	get-tso
	get-ufo
the default ethtool_op_xxx behavior is fine for all drivers, so we
permit op==NULL to imply the default behavior.

This provides a more uniform behavior across all drivers, eliminating
ethtool(8) "ioctl not supported" errors on older drivers that had
not been updated for the latest sub-ioctls.

The ethtool_op_xxx() functions are left exported, in case anyone
wishes to call them directly from a driver-private implementation --
a not-uncommon case.  Should an ethtool_op_xxx() helper remain unused
for a while, except by net/core/ethtool.c, we can un-export it at a
later date.

[ Resolved conflicts with set/get value ethtool patch... -DaveM ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:17 -07:00
Ralf Baechle
10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
Stephen Hemminger
bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Francois Romieu
c946b30472 r8169: revert part of 6dccd16b7c
The 8169/8110SC currently announces itself as:
[...]
eth0: RTL8169sc/8110sc at 0x........, ..:..:..:..:..:.., XID 18000000 IRQ ..
                                                             ^^^^^^^^
It uses RTL_GIGA_MAC_VER_05 and this part of the changeset can cut
its performance by a factor of 2~2.5 as reported by Timo.

(the driver includes code just before the hunk to write the ChipCmd
register when mac_version == RTL_GIGA_MAC_VER_0[1-4])

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Timo Jantunen <jeti@welho.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-05 14:05:48 -04:00
Francois Romieu
d78ae2dcc2 r8169: workaround against ignored TxPoll writes (8168)
The 8168 ignores the requests to fetch the Tx descriptors when
the relevant TxPoll bit is already set. It easily kills the
performances of the 8168. David Gundersen has noticed that it
is enough to wait for the completion of the DMA transfer (NPQ
bit is cleared) before writing the TxPoll register again.

The extra IO traffic added by the proposed workaround could be
minimalized but it is not a high-priority task.

Fix for:
http://bugzilla.kernel.org/show_bug.cgi?id=7924
http://bugzilla.kernel.org/show_bug.cgi?id=8688
(http://bugzilla.kernel.org/show_bug.cgi?id=7555 ?)

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: David Gundersen <gundy@iinet.net.au>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-09-19 21:52:18 +02:00
Edward Hsu
65d916d953 r8169: correct phy parameters for the 8110SC
The phys of the 8110SC (RTL_GIGA_MAC_VER_{05/06}) act abnormally in
gigabit mode if they are applied the parameters in rtl8169_hw_phy_config
which actually aim the 8110S/SB.

It is ok to return early from rtl8169_hw_phy_config as it does not
apply to the 8101 and 8168 families.

Signed-off-by: Edward Hsu <edward_hsu@realtek.com.tw>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-09-19 21:52:18 +02:00
Jeff Garzik
c21723edd5 Merge branch 'r8169-for-jeff-20070806' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes 2007-08-07 17:28:23 -04:00
Francois Romieu
313b0305b5 r8169: avoid needless NAPI poll scheduling
Theory  : though needless, it should not have hurt.
Practice: it does not play nice with DEBUG_SHIRQ + LOCKDEP + UP
(see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=242572).

The patch makes sense in itself but I should dig why it has an effect
on #242572 (assuming that NAPI do not change in a near future).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-08-07 00:07:36 +02:00
Roger So
2584fbc3a6 r8169: PHY power-on fix
Fix extracted from Realtek's driver (8.002.00/20070713) for the PHY
attached to 8111/8168b chipsets.

The check against mac_version is just usual paranoia during the bugfix
period of the kernel cycle. -- FR

Tested on Asus M2A-VM motherboard by Roger So.
No regression on my Asrock 945G DVI either (built-in 8168 + 2x8169).

Signed-off-by: Roger So <roger.so@gmail.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-08-06 23:58:02 +02:00
Matthew Wilcox
313674afa8 [NET]: ethtool_perm_addr only has one implementation
All drivers implement ethtool get_perm_addr the same way -- by calling
the generic function.  So we can inline the generic function into the
caller and avoid going through the drivers.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 14:00:29 -07:00
Jeff Garzik
a6343afb6e drivers/*: mark variables with uninitialized_var()
Mark variables in drivers/* with uninitialized_var() if such a warning
appears, and analysis proves that the var is initialized properly on all
paths it is used.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17 16:23:19 -04:00
Francois Romieu
57a9f236eb r8169: perform RX config change after mac filtering
It does not really make sense to update the RX config register
before the mac filtering registers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:45 -04:00
Francois Romieu
773d202194 r8169: mac address change support
Merged from Realtek's r8169-6.001 driver.

I have added some locking to protect against the arp monitoring
timer in the bonding driver. Accessing the configuration registers
is otherwise performed under RTNL locking.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:45 -04:00
Francois Romieu
96b9709c9b r8169: display some extra debug information during startup
It does not cost much and it will ease the identification of (so far)
unknown devices.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:45 -04:00
Rolf Eike Beer
6cccd6e7a2 r8169: add endianess annotations to [RT]xDesc
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:45 -04:00
Francois Romieu
e9f63f3086 r8169: align the IP header when there is no DMA constraint
Align the IP header when the chipset can DMA at any location (plain 0x8169).
Otherwise (0x8136/0x8168) obey the constraint imposed by the hardware.

This patch complements the previous alignment rework done for copybreak.

Original idea from Philip Craig <philipc@snapgear.com>

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Philip Craig <philipc@snapgear.com>
Cc: Mike Isely <isely@pobox.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
275391a482 r8169: add bit description for the TxPoll register
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
07d3f51feb r8169: cleanup
No functionnal change:
- trim the old history log
- whitespace/indent/case police
- unsigned int where signedness does not matter
- removal of obsolete assert
- needless cast from void * (dev_instance)
- remove dead code once related to power management
- use netdev_alloc_skb.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
901dda2b5f r8169: remove the media option
It has been documented as deprecated:
- in MODULE_PARM_DESC since may 2005 ;
- at the top of the source file and in printk since june 2004.

Good bye.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
0127215c17 r8169: small 8101 comment
Extracted from version 1.001.00 of Realtek's r8101.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
864022344c r8169: confusion between hardware and IP header alignment
The rx copybreak part is straightforward.

The align field in struct rtl_cfg_info is related to the alignment
requirements of the DMA operation. Its value is set at 2 to limit the
scale of possible regression but my old v1.21 8169 datasheet claims a
8 bytes requirements (which never appeared in the driver, of course)
and the 8101/8168 go with a plain 8 bytes alignment.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
0e4851502f r8169: merge with version 8.001.00 of Realtek's r8168 driver
This one includes:

- more tweaks to rtl_hw_start_8168

- a work around for a Rx FiFO overflow issue on the 8168Bb
  - rtl8169_{intr_mask/napi_event} are replaced with per-device fields,
    namely tp->{intr/napi}_event
  - rtl_cfg_info is converted to C99 for readability but the values are
    not changed for the 8169/8110 and the 8101

Includes ChipCmd fix from Bernhard Walle <bwalle@suse.de> (2007/02/24).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
6dccd16b7c r8169: merge with version 6.001.00 of Realtek's r8169 driver
- new identifier for the 8110SCe

- the PCI latency timer is set unconditionally. This part is identical
  in Realtek's r8168 (8.001.00) and r8101 (1.001.00)

- initialization of the cache line size register is for the 8169s only

- more magic in rtl_hw_start_8169

- it is not possible to factor out the setting of the the irq event mask
  with the 8168 and the 8101 any more. Pushed it into the hw_start handler.

- rtl_set_rx_tx_config_registers() and write to the ChipCmd register are
  issued identically for the whole 8169/8110 family: the 8110SCd/8110SCe
  are handled the same way

- work around for AMD platform.

Some registers definitions in Realtek's driver are let aside for later.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:44 -04:00
Francois Romieu
ba6eb6ee85 r8169: prettify mac_version
...still a bit yucky though.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Francois Romieu
cdf1a608a6 r8169: populate the hw_start handler for the 8110
Same thing as the previous change for rtl_hw_start_8168.

The 8101 related code in rtl_hw_start_8169 (see RTL_GIGA_MAC_VER_13)
goes away.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Francois Romieu
2dd99530a2 r8169: populate the hw_start handler for the 8168
rtl_hw_start_8168 inherits the content of rtl_hw_start_8169 minus
the code which depends on RTL_GIGA_MAC_VER_XY (XY != {11/12}).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Francois Romieu
7f796d83ff r8169: add helpers for per-device hw_start handler
They aim to limit the amount of moved code when the hw_start
handler gets more specialized.

No functional change.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Francois Romieu
07ce406467 r8169: add hooks for per-device hw_start handler
Rationale: rtl8169_hw_start will not help maintaining an unified
driver for different chipsets but people at Realtek are probably
too polite to say it distinctly.

Let's add the hook and keep hw_start handler unchanged.

As can be seen from the content of rtl8169_pci_tbl, the RTL_CFG_1
entry in rtl_cfg_info was unused. I recycled it for the 0x8168.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Stephen Hemminger
b449655ff5 r8169: Rx path update
- pci_dma_sync_single_for_cpu is not needed for a single large packet
- remove the function pointer to help gcc optimizing the inline
  pci_dma functions.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
David S. Miller
278667ba18 r8169: kill eth_copy_and_sum()
It hasn't "summed" anything in over 7 years, and it's
just a straight mempcy ala skb_copy_to_linear_data()
so just get rid of it.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Francois Romieu
4ae47c2ddc r8169: de-obfuscate modulo arithmetic
The former style suggests a modulo arithmetic misuse but
the expression should never be < 0. Even if it does, the
driver will simply loop longer than expected (not that
the remaining parts of the system will necessarily
appreciate it...).

Let's warn the user when something goes wrong and try
to go over it.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:43 -04:00
Stephen Hemminger
15d317587e r8169: use netdev_alloc_skb
Use netdev_alloc_skb and remove the useless sk_buff * argument of
rtl8169_alloc_rx_skb.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-07-08 22:16:42 -04:00
Stephen Hemminger
25805dcf9d network drivers: eliminate unneeded kill_vid code
Many drivers had code that did kill_vid, but they weren't doing vlan
filtering. With new API the stub is unneeded unless device sets
NETIF_F_HW_VLAN_FILTER.

Bad habit: I couldn't resist fixing a couple of nearby style things
in acenic, and forcedeth.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03 11:44:20 -04:00