Commit Graph

12 Commits

Author SHA1 Message Date
Per Forlin
199e3f4b41 fault-injection: update documentation with the mmc module param
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:13 -04:00
Per Forlin
1e4cb22bb5 fault-inject: add documentation on MMC IO fault injection
Add description on how to enable random fault injection
for MMC IO.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 15:43:34 -04:00
Akinobu Mita
dd48c085c1 fault-injection: add ability to export fault_attr in arbitrary directory
init_fault_attr_dentries() is used to export fault_attr via debugfs.
But it can only export it in debugfs root directory.

Per Forlin is working on mmc_fail_request which adds support to inject
data errors after a completed host transfer in MMC subsystem.

The fault_attr for mmc_fail_request should be defined per mmc host and
export it in debugfs directory per mmc host like
/sys/kernel/debug/mmc0/mmc_fail_request.

init_fault_attr_dentries() doesn't help for mmc_fail_request.  So this
introduces fault_create_debugfs_attr() which is able to create a
directory in the arbitrary directory and replace
init_fault_attr_dentries().

[akpm@linux-foundation.org: extraneous semicolon, per Randy]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Per Forlin <per.forlin@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:20 -10:00
Simon Kagstrom
0347af4ee3 lkdtm: add debugfs access and loosen KPROBE ties
Add adds a debugfs interface and additional failure modes to LKDTM to
provide similar functionality to the provoke-crash driver submitted here:

  http://lwn.net/Articles/371208/

Crashes can now be induced either through module parameters (as before)
or through the debugfs interface as in provoke-crash.

The patch also provides a new "direct" interface, where KPROBES are not
used, i.e., the crash is invoked directly upon write to the debugfs
file. When built without KPROBES configured, only this mode is available.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Cc: M. Mohan Kumar <mohan@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:32 -08:00
Anton Blanchard
a225a5cc2c fault injection: correct function names in documentation
init_fault_attr_entries() should be init_fault_attr_dentries().

cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries().

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:22 -08:00
GeunSik Lim
156f5a7801 debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.

And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.

debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/

Fix inconsistency of directory name to mount debugfs filesystem.

* From Steven Rostedt
  - find_debugfs() and tracing_files() in this patch.

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by     : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by  : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by  : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Akinobu Mita
185848707e fault-injection: fix example scripts in documentation
Fix and cleanup example scripts in fault injection documentation.

1. Eliminate broken oops() shell function.

2. Fold failcmd.sh and failmodule.sh into example scripts. It makes
   the example scripts work independent of current working directory.

3. Set "space" parameter to 0 to start injecting errors immediately.

4. Use /sys/module/<modulename>/sections/.data as upper bound of
   .text section. Because some module doesn't have .exit.text section.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Akinobu Mita
54114994f4 fault-injection: add min-order parameter to fail_page_alloc
Limiting smaller allocation failures by fault injection helps to find real
possible bugs.  Because higher order allocations are likely to fail and
zero-order allocations are not likely to fail.

This patch adds min-order parameter to fail_page_alloc.  It specifies the
minimum page allocation order to be injected failures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Don Mullis
5d0ffa2b84 [PATCH] fault-injection: Correct, disambiguate, and reformat documentation
Correct, disambiguate, and reformat documentation.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita
329409aeda [PATCH] fault injection: stacktrace filtering
This patch provides stacktrace filtering feature.

The stacktrace filter allows failing only for the caller you are
interested in.

For example someone may want to inject kmalloc() failures into
only e100 module. they want to inject not only direct kmalloc() call,
but also indirect allocation, too.

- e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone
  --> kmem_cache_alloc

This patch enables to detect function calls like this by stacktrace
and inject failures. The script Documentaion/fault-injection/failmodule.sh
helps it.

The range of text section of loaded e100 is expected to be
[/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text)

So failmodule.sh stores these values into /debug/failslab/address-start
and /debug/failslab/address-end. The maximum stacktrace depth is specified
by /debug/failslab/stacktrace-depth.

Please see the example that demonstrates how to inject slab allocation
failures only for a specific module
in Documentation/fault-injection/fault-injection.txt

[dwm@meer.net: reject failure if any caller lies within specified range]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita
8a8b6502fb [PATCH] fault-injection capability for kmalloc
This patch provides fault-injection capability for kmalloc.

Boot option:

failslab=<interval>,<probability>,<space>,<times>

	<interval> -- specifies the interval of failures.

	<probability> -- specifies how often it should fail in percent.

	<space> -- specifies the size of free space where memory can be
		   allocated safely in bytes.

	<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/failslab/interval
/debug/failslab/probability
/debug/failslab/specifies
/debug/failslab/times
/debug/failslab/ignore-gfp-highmem
/debug/failslab/ignore-gfp-wait

Example:

	failslab=10,100,0,-1

slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita
de1ba09b21 [PATCH] fault injection: documentation and scripts
This patch set provides some fault-injection capabilities.

- kmalloc() failures

- alloc_pages() failures

- disk IO errors

We can see what really happens if those failures happen.

In order to enable these fault-injection capabilities:

1. Enable relevant config options (CONFIG_FAILSLAB, CONFIG_PAGE_ALLOC,
   CONFIG_MAKE_REQUEST) and if you want to configure them via debugfs,
   enable CONFIG_FAULT_INJECTION_DEBUG_FS.

2. Build and boot with this kernel

3. Configure fault-injection capabilities behavior by boot option or debugfs

   - Boot option

     failslab=
     fail_page_alloc=
     fail_make_request=

   - Debugfs

     /debug/failslab/*
     /debug/fail_page_alloc/*
     /debug/fail_make_request/*

   Please refer to the Documentation/fault-injection/fault-injection.txt
   for details.

4. See what really happens.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00